Cannot burn photos to dual-layer DVD

I'm trying to use iPhoto's Share->Burn menu, on a recent Mac Pro. It doesn't get far before failing the burn (I don't think it burns any data at all).
The error I get is:
Burn Failed
The burn to the OPTIARC DVD RW AD-7170A drive failed. Double Layer transition point has already been specified; it cannot be changed.
<<
I have rebooted and tried three DVD+R DL discs of two different brands.
No idea what to look at next. Help!

Hi. I am having the same problem. I have already done one backup and I want to do an incremental backup, but when I insert the DL+ disc it tells me that I will need 14 disc. My itunes is only 6.5 gigs?
I think it's a bug.
dedit

Similar Messages

  • Unable to Burn Anything to Dual Layer DVD

    Greetings,
    I have a new Memorex MRX-530LE dual layer burner, and I have verified that I do have the latest firmware from the manufacturer.
    I am able to burn dual-layer DVDs with no difficulty using NERO. I am unable to burn a dual-layer DVD backup with iTunes 8. I have verified this with two different brands of DVD+R9 (DL) media, and I have verified that I am easily able to burn backups using single-layer DVD-5 media.
    Can anyone verify whether iTunes 8 supports dual-layer at all? I have searched the forum and find nothing more recent than 2006, and am hoping that others have now experienced my situation, since DL media and burners are common today.
    Best regards and thanks in advance,
    Scott

    Hi. I am having the same problem. I have already done one backup and I want to do an incremental backup, but when I insert the DL+ disc it tells me that I will need 14 disc. My itunes is only 6.5 gigs?
    I think it's a bug.
    dedit

  • Burning to a dual layer DVD

    Hello,
    I've just finished a project that I want to take to a facility to have copies made. I've been told in the past that using a DVD-R can create problems with the copies when used in certain DVD players. I'm running DVD SP2 and I can't seem to get the program to accept anything but a DVD-R. Is this a preferences issue or should I take the actual Video and Audio TS and burn it straight to the dual layer DVD? Would appreciate any help?
    John
    PowerMac G4   Mac OS X (10.4.6)  

    It could be a hardware and/or software problem.
    As far as Dual-Layer disks go ... I don't think they were around in the DVDSP 2 days... that's too long ago for me to know (without searching, and searching is your friend in this case).
    Also your G4 might only have a DVD-R drive and that might be why DVD SP is only accepting DVD-R's. You most likely don't even have a Dual-Layer DVD drive unless you installed one later on in your G4.
    How large is the Video_TS folder? You'd only need to burn it to a Dual Layer if it's >4.7gigs and even if it is you need to create a Dual-Layer break point in DVDSP to tell the disk when to switch over to the other layer on the disk. Or if it's just over 4.7 gigs (approx.) you can try and re-compress it and see if you can fit it onto one disk (which may be better for compatability issues, something you seem to be concerned about) - you may end up having more problems w/ Dual-Layers and players compared to DVD-R's and players.
    Good Luck

  • IDVD ejects disc during burning process of Dual Layer DVD

    Hi,
    I am trying to burn a 3hr iMovie project of a recent holiday trip. Due to its size, it therefore needs to go on a Dual Disc DVD. I intend to burn 8 copies, one for each member of the holiday.
    I successfully burned the first disc in iDVD, however since then, the disc prematurely ejects at the "Multiplexing and Burning" stage, (At the 'Writing Lead In' stage within this) ,usually with 31mins remaining
    I am burning at 4x , I have 27GB free space and I am using AONE Plus DVDs. I have read many discussions on here about buying Verbatim DVD-R's which i can do, but with the first dvd burning successfully, I would prefer to try other options before I commit to purchase..
    Thanks in advance for any help you can give me
    Max

    Hi again,
    I purchased a pack of Verbatim DVD-R DL Discs, tried the iDVD route and it ejected at the burning and multiplexing stage again. Not only this, but after burning and trying that same failed disc again, it actually contains part of the project, so this disc is now unusable.
    After this I went the Disc Utility option as you advised and successfully got to the end until the 'closing session' section. Here, it continues to load and says it is 'closing the session' and i can hear my Disc drive spinning away, stopping, then starting to spin again (this continues to happen forever and ever)
    Any suggestions at this stage would be great as i'm truly at a lost cause now..
    Thanks
    Max

  • Can iTunes 8 burn to a dual layer DVD?

    Since I'm having issues with my iPod, Mac internal drive, and Time Machine, I'm wanting to start making backup copies of all my music. Before I make coasters out of my DL DVDs, I'm wanting to know if iTunes can even burn to a DL disk? I would use Toast, but it complains about the music I purchased.
    FYI, I could care less if the disk is playable on a regular DVD player. I'm only wanting the storage space in case something happens to the original files.
    TIA!

    What I just did: I took a 6GB+ playlist and clicked on "Burn Disc". Inserted a DL-DVD, and it gave me a warning about how this was a DVD and probably wouldn't be playable on machines. I said OK. There was never any step where single-layer vs double-layer came up: as someone said above, it just knows. It began burning and warned it would take up to an hour, then about 15 minutes later it was done.
    So basically it's just like when you burn a CD, but instead of clicking the CD button, click the bottom one that says "Data CD or DVD" (or something like that). Worked without issues with a DL-DVD, which is nice because I've been unable to use DL-DVDs with some other Mac software, and iTunes has been unable to recognize longer CDs (100 minute ones), on my system at least.
    Note: I believe that burnt data discs don't include playlist data, so if you re-import from these backups, things like play counts are lost.

  • Super Drive / Dual Layer DVD's

    Can a Super Drive in a Power Mac G4 Burn the new Dual Layer DVD's ? If not, what do I use to get more capacity than the standard 4.7 gig DVD's.
    Thanks
    WM-300

    Hi-
    The info I relayed, was in regard to the DVR- 109, not the DVR-111......poor proof reading on my part. You will notice the link (in my second post), and intended recommendation, was to the DVR-109. This drive needs a flash to reach full potential, made possible by Las Vegas' utility:
    http://lasvegas.rpc1.org/
    The DVR-111 needs no firmware flashing, except to alter media support, or remove region code restrictions.
    Sorry to have caused any confusion ......... at least wm300 figured out what I was getting on about.
    G4AGP(450)Sawtooth, 2ghz PowerLogix, 1.62gbRAM, 120gb+160gb HD, ATI Radeon 9800   Mac OS X (10.4.8)   Pioneer DVR-109, LaCie 160gb, 23"Cinema Display, Ratoc USB2.0, Nikon Coolscan

  • W5x0 cannot burn dual layer DVDs

    I bought a W510 as a host for a scanner in late 2010.  My T60p was having fan problems and I liked the W510 so much that I bought a W520.  Originally I was going to use the W520 for the scanner/photo processing but frankly the monitor on the W510 tunes up a little better so I'm staying.
    I've been trying, with no luck whatsoever, to burn dual layer DVDs.  The W520 came with Corel DVD software that does not have verify as an opction (I can't believe it but it appears to be true).  I use the W510 for most of it and it has the old tried and true Roxio.   I installed the Roxio on the W520 so they are equal.
    The two systems came with different DVD writers.  The W510 MAT**bleep**A DVD-RAM UJ8A0A and the W520 a HL-DL-ST DVDRAM GT30N.  Neither drive in neither system can works.  
    I can write about 1 of 10 discs on either system/drive (I've made a lot of coasters over the past month).
    At first I thought it was related to the Memorex media.  Last week before I went out of town I got some other vendors, and started with the Kodak discs but I'm getting hockey pucks at the same failure rate as Memorex, so I conclude the media is not the root cause.
    I also have an external USB drive, Lite On  with a HL-DT-ST DVDRAM GE24LU20 drive in it that also will not work.   The external drive says is it supports up to 8x write speed, but rarely gets above 3-4, but it still makes coasters.
    I've tried limiting the write speed to 2.4x but it still makes coasters.
    I can't believe with a 2 host, 2 drive matrix that there is a drive or system failure involved.  There just has to be something else going on. 
    Does anyone have any suggestions? 
    Thanks!
    Tony

    Another fact set. On the failures, 40% of them fail during the write, another 40% fail during the verify pass with a compare error, and the remaining 20% cannot be read after the burn.
    On my old system the reflectivity of the disc after writing was uniform. On the write failures you can see big gaps in the write band. Sometimes it fails in the first few minutes (before the capacity consumed would switch to the second layer).
    For others even when successful the reflectivity of the disc almost makes it look like the write portion didn't finish the write pad out to finish the disc, and I think some of the read errors are occurring in layer 1 past the transition region. The Roxio software has the option to finish the disc but the Corel burn.now and the included windows DVD ISO burner do not.
    Writing dual layer has never worked on my W510 but my T60p didn't have troubles. What I don't know is whether the difference is T60 to W5x0 or Windows XP to Windows 7.
    Again, any suggestions welcome.

  • Dual Layer DVD's not burning with Disk Utility

    I successfully created two dual layer DVD's with a disk image that I created in iDVD. Checked both of those disks in a DVD player and both work fine. Now trying to burn more copies with the same procedure, same disk image file, same media manufacturer and all are failing. Any ideas? I can still successfully burn short videos on regular DVD's from iDVD so my burner has not completely failed. I had created a disk image out of the material that I need on the dual layer DVD because it's about 2 hours of video and iDVD was ejecting the disk too early without burning.

    Sounds like the burner may have failed. It can fail in a way that only larger items cannot burn. Take it to your nearest Apple Store or Apple Authorized Service Provider to have them check it out

  • Recommendations on Dual Layer DVD Burner Purchase

    Anyone have any recommendations on a Dual Layer DVD burner to purchase to replace the old superdrive?

    Nope - both formats are for both platforms, but there was a spate of +R players and discs made available on PCs when Apple were only using -R. However, I have two or three PC burners that were -R only (and are now sitting on a shelf somewhere) from those days. The capacity of both is so close as to not be an issue, although +R does hold slightly more data. The gross capacity of a DVD-R is 4.7GB, which is in fact 4.372GB when used in a computer. For DVD+R the gross is 4.73GB which converts to 4.377GB on your computer. I guess for some folk that additional capacity might be necessary, but it isn't really worth worrying too much about, IMO.
    Using dual format drives is a good idea, as you can then use either type of disc... however if you read into the background of the formats you'll see that -R is slightly ahead of +R in the compatibility stakes, although more and more players are able to deal with both equally well.
    When it comes to burning a DVD in your superdrive, the slower you burn the better the compatibility is likely to be, however some folk report 100% success with fast burns every time (I've had my share of problems with faster burners). As long as you get an Apple compatible drive you should be OK, if faster burning is what you want to do.
    Layer break points - on a dual layer disc there comes a point when the laser in the player has to switch from the first to the second layer in order to access the data written there. The point at which this happens is controllable by the DVD author and is called the layer break point. However, on some media (specifically dual layer DVD-R) there is no point in setting this up as the first layer will get written until full, no matter what. There will then be an automatically set break point. When this occurs the change over is flagged as 'seamless' which is intended to make a smooth switch over but there are some players which cannot handle this kind of switch and it needs to be flagged as non-seamless. Other types of media (DVD+R DL) will allow you to set the break point where you want it and will allow you to set it as non-seamless. This helps increase the compatibility of your disc when playing back in set top players.
    In DVDSP this means it is probably better to use DVD+R DL media when creating a DL sized project.

  • Unable to burn Dual Layer DVD's with Toast

    Hi all,
    I'm having issues trying to burn dual layer dvd's with either Toast 10.0.8 or 11.0.1. I keep getting the Interface -50 error and sense key 0x02 error saying media is incompatible.
    I have tried dvd's by DataWrite and Elite M and they both show error. It's strange though as I have been using previously purchased Elite M dual layer dvd's of the same spec as these newly purchased ones, and they worked fine!
    My dvd drive is a standard OPTIARC AD-7170 that came with the Mac Pro as spec'd.
    I am able to burn single layer fine, and dual layers are read. I'm just unable to write dual layer at the moment.
    Any ideas? I'm stuck on what to do and what manufacturer's dual layer dvd's will work with this drive. It can just do +R DL.
    Could it be I've been unlucky to have had 4 bad batches? I brought 2 x 2 (25 disc) tubs of DataWrite and same by 50 disc tubs Elite M.
    Please help.
    Thanks,
    Ash
    P.s. I have tried creating a new admin user account to see if I am able to burn under that. I get the same errors.
    P.p.s. "Hopefully" this is just a media issue and I can find some that works again. If not and it is a drive fault what can I do? What writers spec'd same are available internal for my Mac Pro?
    Message was edited by: AshleySmith06

    Grant Bennet-Alder wrote:
    If think you may be using the wrong speed-range media for that drive's capabilities. As I mentioned, there are two ranges, and 8X media cannot be written in a 2.4x (sometimes referred to as 4x) drive.
    When you get an error message that actually tells you something concrete, you should listen to it:
    CANNOT WRITE MEDIUM - INCOMPATIBLE FORMAT
    ... is pretty unambiguous. It's a problem with the Media.
    Off-Brand media is the next weak link in the chain. One of their many problems is that they vary wildly from batch to batch. Verbatim media are thought to be the "gold standard". Get a small number of Verbatim Media and see if you can make ONE master on the best in the market. If you can, the problem is in the Media. If you can NOT, the problem is in the process.
    Like I mentioned I have never had issue with Elite M before, and I always set Toast to burn "Best" under the recorder settings.
    Here's what system profiler says for the disc and drive...
    OPTIARC DVD RW AD-7170A:
    Firmware Revision: 1.N8
    Interconnect: ATAPI
    Burn Support: Yes (Apple Shipping Drive)
    Cache: 2048 KB
    Reads DVD: Yes
    CD-Write: -R, -RW
    DVD-Write: -R, -RW, +R, +R DL, +RW
    Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
    Media:
    Type: DVD+R DL
    ID: UMEDISC DL1
    Blank: Yes
    Erasable: No
    Overwritable: Yes
    Appendable: Yes
    Write Speeds: 1x

  • Can't burn dual layer DVD's

    Now that full retail copies of Leopard seem to be rarer than hens teeth I thought it about time I made a back up copy of mine to see my G5 imac through.
    I've created a new disk image, popped in a dual layer DVD and on clicking burn get the message "The disc inserted does not have enough free space" despite it being only about 6.5 gb, and using a dual 2.4ghz iMac.
    I've tried several types of DL disk, confirmed that system profiler gives DVD dl write status, and have no problem burning cds or single layer dvds.
    Anyone come across this, and if so, did you cure it. Thanks

    This is a genuine problem. I bet that if you tried to read a burned (that is, not manufactured) Dual Layer disc (either +R DL or -R DL) you would not be able to do that either; my iMac simply refuses to read the disc, which has to be force-ejected at startup.
    I work in the CD/DVD manufacturing industry (and have for nearly 10 years) and we are getting complaints from customers that they cannot read our DL burned media, either +R DL or -R DL. However, only people with Macs have this problem. I have confirmed the DVDs play on every PC in our office, and also several set-top units, but none of our three Macs work. To dispel the whole "your media is junk" theory, I have tried several brands, including verbatim, ritek, and CMC magnetics (Hotan). I have also also tested the burned media in our $5,500 CD/DVD analyzer and it conforms to respective book standards and does not have any POFs and very low if any PIFs.
    As a last resort, I hooked up an external IDE Pioneer 118 via a FireWire bridgeboard (a drive actually removed from a PC that played the DVDs just fine) to an office iMac. Unlike the internal Matsushita drive, this drive will read the Discs, but MacOS refuses to mount them!
    This has to be some kind of problem with MacOS or the hardware. Either Apple has engineered it to not work with non-manufactured Dual Layer discs, or there is some big mistake here. Searching google and these forums reveals all sorts of similar issues.
    Come on Apple respond to this post!!!!

  • Burn Dual layer DVD+R 8.5 GB on OSx 10.5.8----Possible?

    I have 5.6GB of photos I want to burn to a DVD.  I bought memorex dual layer DVD+R 8.5 GB today. Burning failed. I have OSx 10.5.8. Can my computer burn a dual layer DVD?  How do I do it? 

    Would it be possible to buy and external dvd drive that would have the capability to burn dual layer?
    Yes.
    I know they have cd/dvd drives for the macbook air. But I'm wondering if I could buy it, hook it up, and it work with idvd.
    That model of drive will only work on a MacBook Air. You need a third-party model; iDVD 6 and newer can burn to external drives.
    (45871)

  • DVD RW DW-U10A won't read burned Dual Layer DVD

    My friend created a dual layer dvd for me on his PC. I put it in my G5 and after about 15 seconds of the drive trying to read the dist it just gets spit out. It won't mount or anything.
    Why is this happening? I've never had problems reading discs created on a PC. Is my drive incompatible with DVD DL+R media?

    Hi,
    I've been having a similar issues since not long ago. I think it coincides with Apple,s last security update (although I can't swear the 2 are connected).
    I have a dual core 2GHz PowerMac G5 with a Pioneer DVD-R 110D Dual Layer.
    I'm burning Dual Layers medias with Toast 7 (DATA, DVD-VIDEOS ETC). They all mount fine after and I can read the files etc. However if I insert the discs a few day slater, about 50% of them won't mount and are rejected without any error message!
    Anyone else has this problem?

  • Sense Error Message when trying to burn Dual-Layer DVDs?

    Hey all,
    I am trying to burn a dual-layer DVD disc with the internal drive in my MacBook Pro.
    I am getting the same error message from Toast each time I try to burn a disc. I get no response from Disk Utility (it just says "waiting for the disc drive") and Finder doesn't recognize the dual-layer disc when I try to burn in Finder.
    I've heard that it may be a media issue, so I've tried with every single brand of DVDs that I can get my hands on. So far, I've tried Verbatim, Sony, and Memorex. I can't find any other brands of media, even at Best Buy?
    I've heard that it may be a security update that might have caused this issue. System Profiler says that my machine can burn both DVD+R DL and DVD-R DL.
    What is going on?!??

    Welcome to Apple Support Communities
    The two most common suggestions are (a) try other media, which you've done (and Verbatim normally work) and (b) run a DVD Lens Cleaner disc through it to see if some dirt or dust on the lens it causing the problem. If this doesn't fix it then it sounds like a hardware fault and best to let Apple check it out.

  • IDVD refuses to burn lengthy video even though it's set to dual-layer DVD.

    *"Your project exceeds the maximum content duration. To burn this project, remove some content."*
    Project:
    *- total project duration: 164:10 minutes*
    *- total project capacity: 5.208 GB (max. available: 4.172 GB)*
    Menus:
    *- number of menus in project: 2 menus*
    *- total menu duration: 1:10 minutes*
    *- total menu capacity: 54.240 MB*
    Movies:
    *- total movies duration: 163:00 minutes*
    *- total movies capacity: 5.155 GB*
    This should fit quite snug on a dual-layer DVD, which I've gone to the preferences and changed to do so. It won't even let me make a disc image.

    What encoding mode / bit rate is it set at?
    I strongly suggest not exceeding 120 mins. (2 hours) max unless you opt to use a 3rd party app like Roxio Toast's Fit to DVD option.

Maybe you are looking for