Cannot burn recovery dvd disc in toshiba recovery media creator and windows 8

I just purchased a satellite Pro L875 with blu ray writer.
When I use the recovery media creator, error message come up, asked me to check if the media was broken or scatched.
The dvd had some data written on it and it was not blank after the error message.
I tried to burn dvd disc in windows 8 alone. it did not start burning. I only added the file to be burnt on the optical drive.
I played dvd and blu ray on the drive. it had no problem.
How to get it burn recovery disc and normal data disc?
I found information about try to use the appropiate dvd disc with the speed that matches the burner speed.
How to know what blu ray rw, dvd rw speed my blue ray writer support?
it would be great if anyone answer my questions and will get the drive to burn some disc..
Solved!
Go to Solution.

If you can't solve your issue and no one in the community can help, contact support to speak with a tech support agent at (800) 457-7777.
- Peter

Similar Messages

Currently cannot burn a dvd or cd post install of snow leopard. Various errors to some times just ejecting the disk with no reason. System was fine prior to upgrading to snow leopard.

Currently cannot burn a dvd or cd post install of snow leopard. Various errors to some times just ejecting the disk with no reason. System was fine prior to upgrading to snow leopard.

MATSHITA DVD-R UJ-857E:
Firmware Revision: ZA0E
Interconnect: ATAPI
Burn Support: Yes (Apple Shipping Drive)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -R DL, -RW, +R, +R DL, +RW
Write Strategies: CD-TAO, CD-SAO, DVD-DAO
Media: To show the available burn speeds, insert a disc and choose View > Refresh

X61s Cannot burn/format DVD

I have tried with multiple blanks DVD-R and I cannot burn any DVD. It runs and then just says general failure. Any way I can troubleshoot this. I do not have another drive to test.
It says DVD MultiRecorder CD-RW
Is this in fact a DVD Burner.
Thanks for any help and/or suggestions.

sjmp wrote:
I have tried with multiple blanks DVD-R and I cannot burn any DVD. It runs and then just says general failure. Any way I can troubleshoot this. I do not have another drive to test.
It says DVD MultiRecorder CD-RW
Is this in fact a DVD Burner.
Thanks for any help and/or suggestions.
It is not a DVD burner. It is a CD-RW and could read DVD disc. So you could burn DVD-ROM by this device.

Cannot burn NTSC DVD after burning PAL DVD

Using Adobe Premiere Elements vers.10, I created a video which I need to burn onto DVDs, in PAL format for European users and NTSC for North American recipients. I successfully burned (to folder) in NTSC, and then in PAL. Produced two sample DVDs from those two folders and reviewed them. This highlighted the need for a few corrections to the project. I carried these out, burned the revised film to folder in PAL format, and then wanted to do the same in NTSC format. The computer appears to work on the task, but produces no folder and no files. I am no longer able to procude a DVD in NTSC format, either by burning to a folder or burning directly on a DVD. What is the cause of this problem ?
Thanks in advance for any help you can provide with this issue.
Paul

Paul,
I do not recall any issues, where the program gets hung up, though as a precaution, maybe clear the Media Cache in the Scratch Disks. I know that Encore (sort of the authoring "big-brother" to the authoring function in PrE) can get confused, when it has some older Media Cache files. It assumes that things have already been done, when it needs to "start over."
Also, I would create a new, empty folder, with a unique name, and direct the Burn to Disc to THAT folder. Since all that one gets is the VIDEO_TS, AUDIO_TS (empty), and then another folder, whose name I cannot recall (Encore does not write anything but the VIDEO_TS folder and IFO, BUP and VOB files), it's easy to confuse the output. Just thinking here.
Good luck,
Hunt

Do I need any additional software to burn on dvd disc in mac book pro

How do I burn images on dvd on my Mac book pro
setty prabhakara

Do I need any additional software to burn on dvd disc in mac book pro
No.
How do I burn images on dvd on my Mac book pro
Help here > Disc Burning Quick Assist

Why can't I burn a dvd disc on my macBook pro ?

I transferred some video footage to "iMovie' for editing and when I tried to burn it to a dvd disc, there was no option for that operation. All of the choices were to transfer it to You Tube, of facebook.Can I burn a dvd disc on my macBook pro laptop or not?

If you have a macbook with internal or USB external Superdrive, insert disk, and an option appears for burning files.
Otherwise drop the movie into a folder and click on the settings button of the folder and choose "burn .......to disk"

I cannot burn my dvd

Hi guys, I hope someone can help me
In the last weeks, I cannot burn any dvd or cd
When I try, appears an error message: code 0x8002006E
I cannot burn with Toast and with Disk Utility too
What can i do to solve it?
Thank you and bye
paolo

Hi
Like Paolo, Finder ejects DVD-RW when I try to burn data from Documents. Message is - This operation can't be completed, you do not have necessary permission.
I am the only user and administrator. Intel iMac mid 2010 21.5in. Is this a set up issue or familiar to anyone?
Thanks
Framcastle

Burning A DVD Disc That when inserted appears as Three seprate discs

hello everyone i am trying to Burn A DVD Disc That when inserted appears as Three separate discs such as if it had been partitioned but disk utillity.app can only partion a disc once.
I have a SuperDrive and have used it before so i know it works and that i have one.
If anyone has an idea as to how i may do this i would really appreciate any help you have.
Thanks -KKNUPP

kknupp
You dvd has been written in sessions (three in this case).
You can copy all the data from the original DVD into one folder and burn the folder onto another DVD.
Do you want to make your life harder? Do the following: start Disk Utility (inside /Applications/Utilities) and click on the new image icon on top left. Pick a name for the image and specify the size (4.7 or 8.0 GB depending on the size of the original DVD as well as the rest of parameters from the drop down menus: encryption-none, format-read/write. Save the image and expand it (open it). Coppy all the required data inside it and burn it.

Premiere Elements 10 will not burn a DVD. It stays at 99 percent and will not complete the burn.

New HP 1107c. Cannot burn a DVD with Premire Elements 10 64 bit. Works OK on a 64 bit Dell. Could this be a DVD hardware problem ? Turned off all Microsoft services via msconfig, disabled virus and spyware software, but still hangs at 99 percent burn

You will find best advice over on the video forum. Most of us here are photographers.
Click on the link below and copy and paste your question again. Good luck.
Video questions: Click here for Premiere Elements Forum

I have a video in excellent quality (1280x720 23,976 fps) I burn the dvd in encore cs6 with hd menu and I get pixelated. I've done transcoding but It downgrade to 480 I need urgent help.

I have a video in excellent quality (1280x720 23,976 fps) I burn the dvd in encore cs6 with hd menu and I get pixelated. I've done transcoding but It downgrade to 480 I need urgent help.

Hi,
first, sorry if my english sucks jajaa i speach spanish, havent practice my english for a while.
first i edited my video in premier cc
sequence 1280X720, 59,94 fps
48000hz - stereo
the i linked it with dynamik link to after, make some color correction, etc etc etc
i renderd in quicktime animation
my video looks fine in my computer, but when i send my .mov video to encore (cs6) in a HD MENU and standard menú, the image sucks.
i have done the transcoding in encore, but i doesnt work either. i dont know what else to do.

Satellite Pro L875: Cannot burn DVD in Recovery Media Creator and Win 8

I have a Satellite Pro L875 with Blu-ray Burner.
I tried to create DVD Recovery disc, the burning process stopped and had error prompt asked me to check if the disc was damaged or scratched. After the burning process, the DVD was not blank and had some data written on it.
I tried to burn data disc in windows 8. the burner did not start. I only able to add files to the drive.
I play Blu-ray movies and dvd movies, the blu ray drive was fine.
I found information about the appropriate dvd disc speed that matched the burner speed.
How do I know what speed the burner support?
How to burn DVD or Blu-Ray in windows 8? ( I have looked at Microsoft forum but the solution did not work.)
It would be great if anyone answer and make the drive burn some discs.

At first it will be interesting to see why you cannot create recovery discs.
Have you used empty DVD-R media? If not please use it and buy some high quality product like Verbatim or TDK.
Is there option to create recovery USB stick?
Burning under Win8? Have you tried to use some burning applications like NERO?

Error-29, Cannot burn a DVD or save a disc image from within FCPX using Mountain Lion

Really stumped on this one.
Running Mountain Lion, freshly downloaded version of FCPX, on a 2009 MacPro with 16 G RAM.
Trying to share a 4 minute movie I edited.
- No problem exporting as a quicktime move...worked fine
- Big problem trying to either burn a DVD, save a disc image, or export to an Apple device.
The progress bar gets about 90% complete, and then it stops and a message window comes up that says:
There was an error burning your disc. The operation couldn't be completed. (DSPPublishing error-29)
Thoughts?

From Crash Analyzer:
DSPPublishing error -29 (Final Cut Pro X)
This error can occur when burning a disc if your menu has incompatible assets.
Suggested Actions
If your menu has a background image, make sure the image is not too large. Try reducing the size of the image and saving it as a JPEG or PNG.
Report generated by Crash Analyzer in Pro Maintenance Tools

Cannot burn a working disc edited in FCP with DVD Studio Pro

I have made nice DVDs before with DVDSP
I edited a 10 minute video in FCP
Sequence-720 x480 anamorphic DV/DVCPRO –NTSC
Used compressors for encoding
Used compressor’s DVD Best quality settings. Looks fine.
After encoding assets
Put them in DVDSP. The video looks good and functions correctly in preview window.
Somehow when I go to burn it, Im missing something simple - a setting? a preference? New folder?
It will not burn a DVD I can view on PC or standard DVD player. EHHHHHH!!!!
I can get a disc to burn but it will only play my mac. No SD DVD player or computer will recognize it. I must be missing something very simple. HEEELLLLP
Below is DVDSP log results
Note: The file ‘Corona tourney-lip RipperZ fred hall DVD 03/12.ac3’ found in the ‘Lipp ripperZ Fred hall DVD’ folder is not a DVD-Video file and will not be included in the final disc or DLT.
Note: The file ‘Corona tourney-lip RipperZ fred hall DVD 03/12.m2v’ found in the ‘Lipp ripperZ Fred hall DVD’ folder is not a DVD-Video file and will not be included in the final disc or DLT.
Note: The file ‘lip RipperZ fred hall DVD 03/12.fcp’ found in the ‘Lipp ripperZ Fred hall DVD’ folder is not a DVD-Video file and will not be included in the final disc or DLT.
Thanks
Gary

Out of frustration I burned the movie in iDVD. It will work for now. So it's not media DVR-R. DVDSP has a setting or preference wrong or there is some corruption in the software that needs to be adressed.
DVDSP make much better looking and sounding DVDs than iDVD. I stilll need to solve the problem for future DVDs.
As of now DVDSP is set SD 16:9 in the preferences and SD NTSC the disc window.
Thanks
Gary

Cannot burn to DVD with iPhoto 5.0.4

Looks like I'm not the only one with this problem. I simply cannot burn my photos to DVD or CD. I was planning to make a backup copy of my summer photos and run into this problem. iPhoto starts the burning process and returns error with the DVD drive.
How much does iPhoto require free disk space on the boot volume? I currently have about 1.37 GB free. When I tried to burn I had over 2 GB free disk space.
Has anyone reported this problem to Apple yet?
By the way when I exported a couple photo albums from iPhoto it (iPhoto) flipped a couple of photos upside down. No, I didn't even touch the rotate button, the program did this on it own, none of those photos were even selected at the moment. I instally hit the revert to original button. I'm starting to get worried without current backup now. Strange things are happening...

1.37G is way too little! The system needs at least the size of the DVD as free space to burn. It's highly recommended that you have a minimum of 15% or 10G, whichever is greater, as free space to assure efficient and trouble free operation. If you get down really low and the system tries to write needed files to the HD you can trash you HD with little hope of recovery. I would do whatever it takes to get your free space up to around the recommended limit.
One way to get a little of it back is the following:
1 - run either Cache Out, OnyX or Mac Sweeper to clean out the various cache and archived log files.
2 - run Monolingual to remove the unneeded language modules. I saved 900+MB the first time I did it.
Do you have a camera that has an autorotate option? if so and it's turned on that may be the reason for the rotation issue. The 5.0.4 update corrects this but only for subsequent imports.
Hope this has been of some help. Good luck.
OT

How to use Recovery DVD to install new copy of OS and CUSTOM PARTITIONS?

Hi
I have problem with start appropriate recovery function from created Thoshiba Recovery DVD.
I burn two DVD using Toshiba Media Recovery Creator witch was preinstalled on my computer. Now I want to use it to install new copy of Windows 7 OS on my laptop. BUT I would not want to clear entire HDD. I want to format only C: partition, and leave data on my D: partition. Also I want to define C: partition size.
When I insert DVD and boot form it, some app start but display info that all partition will be removed. I can not choose another option.
How can I do it?

Hello
Check please http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm document.
I think everything must be explained there. If you have more questions please let us know.

Cannot burn recovery dvd disc in toshiba recovery media creator and windows 8

Similar Messages

Maybe you are looking for