Cannot calibrate displays

Hi,
this has happened recently, perhaps since updating to 10.4.9:
The MBP display is super-flat and washed out (no contrast - black is grey...) and I can no longer calibrate either the MBP or external display. When I hit the calibrate button I get the message:
"Can not calibrate the display.
The factory profile for the display could not be found."
I seached help and got a hit on an identical problem with iBooks running 10.3.1 but the solution was to upgrade to 10.3.2... (Obviously, not really much help to me.)
I have checked and all of the profiles seem to be there, and the calibration assistant is telling me that it can find no problems either.
Any ideas?
thanks in advance
peter
MacBook Pro 15" Mac OS X (10.4.9) Samsung 213T External display

Try repairing yur disk permissions and ensure that your profiles are actually in…
/Library/Colorsync/Profiles

Similar Messages

Windows XP + iTunes: (sync) photos not copied...cannot be displayed on ipod

Hello all,
I'm sorry if this is a known and solved issue but I'm really frustrated about it.
I have bought a brand new ipod Classic 80GB. My system is running Windows XP SP2 (up to date) and iTunes 7.5.0.20. I have an NTFS Hard Drive (2 Partitions, C and D) and a FAT32 Hard Drive (1 Partition, E).
Every time I try to sync my ipod through iTunes with a video or photo I get the following error message: "Some of your photos, including the photo PHOTO_NAME, were not copied to the iPod IPOD_NAME because they cannot be displayed on your iPod."
What is this? I have followed the photo (and video) sync procedure to the letter. On my laptop (also Win XP SP2), iTunes works just fine! So there's nothing wrong with my photos/videos.
I looked around the Internet and found there's a similar issue in Windows Vista with RAID and/or NTFS. I do NOT have RAID or Vista.
It there a known bug also in Windows XP? Is there a fix expected?
I tried moving my photos on a USB FAT32 Stick but still I was unable to sync them with my ipod.
Any help or information will be much appreciated.

Near as I can tell, iTunes DOES NOT like a JPEG with an embedded color profile. I too have been seeing a simliar issue and did some troubleshooting last night to arrive at this conclusion.
Pictures exported from Adobe Lightroom would sync to my iPod Touch via iTunes without any issue. However, Pictures saved from Adobe Photoshop would fail with the error "Some of your photos, including the photo PHOTO_NAME, were not copied to the iPod because they cannot be displayed on your iPod."
This set me to looking at the differences in the JPEGS that Lightroom was creating vs. the ones that Photoshop was creating. I finally arrived on the inclusion of the color profile.
Pictures exported from Lightroom, while converted to the sRGB color space, did not include the profile in the image and sync via iTunes just fine. Photoshop, on the other hand, automatically includes the profile when saving as a JPEG and these pictures WILL NOT sync via iTunes. Even if you tell Photoshop to not include a color profile, it includes a piece of metadata that says the profile is not specified (which is distinctly different from Lightroom which omits the metadata entirely.)
Choosing File|Save for Web... (as opposed to File|Save As...) in Photoshop does not include any color profile (just like exporting from Lightroom) and syncs via iTunes just fine.
I'm very curious to know if the images that you (and others) are having problems sync have, for some reason, a color profile embedded in them. In Windows Explorer, you can right-click on a picture, choose Properties, select the Details tab and look for the Color representation property. My assumption is if it is blank, the picture will sync fine, but if it is anything else it will not sync.
It'd be great to get confirmation from Apple if this is indeed an issue - that JPEGs with embedded color profiles are not sync'd with iTunes. I'm going to do a few more tests today and see, if by chance, including a Mac color space on the image enables it to sync or not.

Outlook 2010 "Your automatic reply settings cannot be displayed because the server is unavailable" error

Hi,
We recently introduced a Exchange 2010 server into our Exchange 2003 enviroment but had to stop migrating users over to it after it became appartent that users using Outlook 2010 could not switch on their Out Of Office, getting an "Your automatic reply settings
cannot be displayed because the server is currently unavailable" error. However users on the new 2010 can set OOF if they use OWA or Outlook 2003!
Running the Test E-mail AutoConfiguration shows no errors with the Log tab showing Autodiscover succeeded and the Results tab showing all the correct values, including a OOF URL of
/Autodiscover/Autodiscover.xml">https://<servername>/Autodiscover/Autodiscover.xml into IE gives a XML file with a 600 error code.
I have looked at loads of 'solutions' on the Internet but cannot get this working, anyone have any suggestions?
Thank you,
Craig

Please verify IIS
settings:
======================
On Exchange CAS
server, open IIS console,
Go to default web site, double click “SSL
Settings”, make sure Client Certificates is set to “Ignore”
Click Autodiscover, double click “SSL
Settings”, make sure Client Certificates is set to “Ignore”
Click EWS, double click “SSL
Settings”, make sure Client Certificates is set to “Ignore”
Click OAB, double click “SSL
Settings”, make sure Client Certificates is set to “Ignore”
Please run IISRESET command to load the changes.
Thanks.
Tony Chen
TechNet Community Support

Out of Office error: 'Your automatic reply settings cannot be displayed because the server is currently unavailable. Try again later.'

Hi,
This is my first post in the forums. Please forgive me if it's in the wrong category or if it's not posted correctly in any way.
I'll try and give you below as much information about the problem we have here as I can.
What we have:
- an on-premises Windows 2012 Standard server that is the PDC, DNS and DHCP server;
- a second Windows 2012 Standard server with the sole purpose of hosting our Exchange 2013 CU7 server;
- Windows 7 PCs with Office Home and Business 2010 v.14.0.7143.5000 (32-bit);
- Outlook 2010 connects through Outlook Anywhere (mail.ourdomain.com).
The problem:
If trying to set up Out of Office through Outlook on the client PCs, we'd get an error message: 'Your automatic reply settings cannot be displayed because the server is currently unavailable. Try again later.' Interestingly, it does work normally for some users.
It works fine for all users if done through OWA.
Tests performed:
User 1 on PC1 has the problem. User 2 on PC2 doesn't have the problem. Both users are members of the same security groups.
- setting up User 2 on PC 1: the problem exists;
- setting up User 1 on PC 2: the problem exists;
- setting up a second Outlook profile on PC2 within User 2's domain account (the one that works), for the same User 2: the problem still exists!
I haven't been able to set up an Outlook account that works since this issue was discovered, although there are existing Outlook accounts that do not have the issue.
Let me also point out we have another issue we are working on and which may or may not be related: the Autodiscover function in Outlook doesn't work. Test E-mail AutoConfiguration results in 'Autoconfiguration was unable to determine your settings!'.
I can see postings in the Internet of other people having the same problem with OoO, but couldn't see a solution that fits my case: some existing accounts in Outlook are fine, other are not and newly created profiles of aforementioned working accounts do not
work. The majority of the articles/threads I read suggest recreating the Virtual Directories in Exchange, but we did that just a month ago (when troubleshooting the Autodiscover problem) and besides if the problem is in the Virtual Directories, I would expect
it to affect all accounts.
Any help in resolving this problem would be greatly appreciated. Please let me know if you need other details.
Apologies if the posting is not in the right place or not done properly - I'm still learning.

The IIS log files on the CAS might tell you something. Depending on how your proxy server handles NAT the IP address of your connection might be from the proxy server instead of your client.
In any case, a tool like Fiddler (http://www.telerik.com/fiddler) can be extremely helpful in working on problems like this because it can decode the SSL traffic on the client and you can see what's being sent
and what's being received.
Another thing to check (although it's unlikely to be your case) is whether or not your browser (when you try connecting to the autodiscover URL) thinks it's in the "Internet" zone. the "Local intranet", or at a "Trusted" site.
The domain names you use on machines on your LAN should be excluded from being proxyed. Anything with "." in the name will be set, unless excluded, to the proxy server.
Is the time correct on the client machine? Is it more than 5 minutes different to the Exchange machines and domain controllers? That'd be something that would cause Kerberos to fail.
A certificate can be a problem if its expired or if it doesn't have the correct names. But I wouldn't worry about the uglog.com domain just yet. Until you get the Autodiscover working with the SCP you have bigger problems.
If you've never used a WPAD file then don't worry about it. It's very useful if you have a complex network and you want to manage how browsers connect to servers. For example, if you have multiple proxy servers the each manage a different set of names, an/or
if some names should bypass proxy servers entirely and just connect directly. If run a strictly Microsoft network with only Microsoft product that you can manage with GPOs (and you can enforce those GPOs on every machine -- even the BYOD ones) you probably
don't need a WPAD.
--- Rich Matheisen MCSE&I, Exchange MVP

When i open my SQL reporting URL it says this page cannot be displayed

Hi All,
I am using SQL Server 2008 with SP3. When i open my open my reporting manager URL. i get the error as "This page cannot be displayed" HTTP Error 500 internal server error. I read few blogs posted below. Tried both but could not help me out
http://social.technet.microsoft.com/Forums/en-US/1a03196f-f8ee-4a66-b08b-b2e02447a25e/can-not-open-page-for-report-manager-url-httplocalhost8080reports-for-sql-server-2008?forum=sqlreportingservices
and
http://ashwaniashwin.wordpress.com/2014/02/28/the-url-has-already-been-reserved-error-while-configuring-the-report-server-url-in-reporting-services-configuration-manager/
But none of them helped.
I tried deleting the reserved URL and re reserved but still did not help.
Tried changing the port number but still no luck.
I analysed the sql reporting error log and found the below.
===============================================
library!ReportServer_0-1!ad4!06/07/2014-03:30:52:: Call to GetSystemPropertiesAction().
ui!ReportManager_0-2!fbc!06/07/2014-03:30:54:: e ERROR: Unable to validate data.
ui!ReportManager_0-2!fbc!06/07/2014-03:30:54:: e ERROR: HTTP status code --> 500
===============================================
at ReportingServicesHttpRuntime.BaseWorkerRequest.FilterAndThrowException(Exception e, String message)
at ReportingServicesHttpRuntime.RsWorkerRequest.GetUserToken()
at System.Web.HttpContext.get_ImpersonationToken()
at System.Web.ClientImpersonationContext.Start(HttpContext context, Boolean throwOnError)
at System.Web.HttpApplication.ThreadContext.SetImpersonationContext()
at System.Web.HttpApplication.ThreadContext.Enter(Boolean setImpersonationContext)
at System.Web.HttpApplication.OnThreadEnterPrivate(Boolean setImpersonationContext)
at System.Web.HttpApplication.ApplicationStepManager.ResumeSteps(Exception error)
library!ReportServer_0-1!e0c!06/07/2014-03:30:49:: Call to GetItemTypeAction(/).
library!ReportServer_0-1!f10!06/07/2014-03:30:49:: i INFO: Catalog SQL Server Edition = Enterprise
library!ReportServer_0-1!e0c!06/07/2014-03:30:49:: i INFO: Catalog SQL Server Edition = Enterprise
crypto!ReportServer_0-1!e0c!06/07/2014-03:30:49:: i INFO: Initializing crypto as user: E2K\Lg161489
crypto!ReportServer_0-1!e0c!06/07/2014-03:30:49:: i INFO: Exporting public key
crypto!ReportServer_0-1!e0c!06/07/2014-03:30:49:: i INFO: Performing sku validation
crypto!ReportServer_0-1!e0c!06/07/2014-03:30:50:: i INFO: Importing existing encryption key
library!ReportServer_0-1!e0c!06/07/2014-03:30:50:: Call to ListParentsAction(/).
library!ReportServer_0-1!e0c!06/07/2014-03:30:50:: Call to ListChildrenAction(/, False).
webserver!ReportServer_0-1!e0c!06/07/2014-03:30:50:: i INFO: Processed folder '/'
library!ReportServer_0-1!ad4!06/07/2014-03:30:51:: Call to GetPermissionsAction(/).
library!ReportServer_0-1!f10!06/07/2014-03:30:51:: Call to GetPropertiesAction(/, PathBased).
library!ReportServer_0-1!ad4!06/07/2014-03:30:52:: Call to GetSystemPermissionsAction().
library!ReportServer_0-1!f10!06/07/2014-03:30:52:: Call to ListChildrenAction(/, False).
library!ReportServer_0-1!ad4!06/07/2014-03:30:52:: Call to GetSystemPropertiesAction().
library!ReportServer_0-1!f10!06/07/2014-03:30:52:: Call to GetSystemPropertiesAction().
library!ReportServer_0-1!ad4!06/07/2014-03:30:52:: Call to GetSystemPropertiesAction().
ui!ReportManager_0-2!fbc!06/07/2014-03:30:54:: e ERROR: Unable to validate data.
ui!ReportManager_0-2!fbc!06/07/2014-03:30:54:: e ERROR: HTTP status code --> 500
I have also attached all the logs in a FTP for further analysis. Please download it from the below link.
https://depositfiles.com/files/cfe6af33b
Can any one please help me. Seems to be a never ending issue to me.

Take a look on link
http://pcsupport.about.com/od/findbyerrormessage/a/500servererror.htm
In case If you rebuilt the server then then linking will break , go in encryption keys option if only delete button is enabled, and backup button is disabled the delete the keys .close the report configuration manager and reopen the manager .Now try
to open report manager url.
Please click "Propose
As Answer" if a post solves your problem, or "Vote
As Helpful" if a post has been useful to you

"XML page cannot be displayed" error

Using XML output on a table with more than a few rows falls over with a "XML page cannot be displayed" error. Sometimes only the error is displayed, sometimes some rows are displayed with this error at the end of the page (eg the DEMO_STATES table)
Can anyone advise if there is some sort of limiter at work here?
Thanks,
Barry

i'm pretty sure that error comes up when your browser (ie, specifically, i believe) can't render the xml data it's received. i'm also pretty sure, as the full message implies, it's because it doesn't know what style sheet to use when you go to that page. in short, it's a browser config issue. one way to bypass it (to at least prove that it's a browser issue) would be to create a link to your page, right click the link, and do a "Save Target As...". the resulting file will be your valid XML one. fwiw, i've had better luck controlling the manner in which my xml data is received when i use mozilla or netscape (but i'd imagine there's just some setting you'd toggle in IE to avoid your issue).
hope this helps,
raj

XML Page cannot be displayed An invlaid character

While testing a report, I have noticed two issues and I believe this is the correct forum for the subject.
A report is completing successfully with a completion status of Normal in the concurrent manager. The report has data. However upon inspection of the XML of the request (Diagnostics -- View XML) the following error message appears
The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
An invalid character was found in text content. Error processing resource 'http://sinudy07.devtst.go2uti.com:4110/OA_CGI/FN...
<ITEM_DESCRIPTION>Office supplies
Upon inspection of the data, it appears that the offending character is an ACSII 150.
Can you provide a solution by which alphanumeric data is properly handled in XML? Is this an encoding issue?
Why does XML Publisher exit successfully when it has an error? When this error is detected, I am assuming that the report is incomplete, but to the end user it looks complete.
Many thanks for your suggestions and advice.
Tom

Is the error message displayed in Firefox or in IE, or in a customized window that doesn't identify the browser?
''If it displays in Firefox:''
It's possible that the Troubleshooter doesn't work correctly unless IE is your default browser. You could test that possibility by having IE make itself the default and testing the Troubleshooter again.
''If it displays in IE or embedded in another Microsoft application:''
In a web search I found these suggestions:
(1) Reset your Internet Explorer settings, according to http://answers.microsoft.com/en-us/ie/forum/ie8-windows_7/cannot-view-xml-using-xsl-style-sheet/ccfe80c6-c0db-4594-a7e3-475f9eac0e85
(2) Try the System File Checker, according to http://ask-leo.com/why_do_i_get_the_xml_page_cannot_be_displayed_after_running_a_microsoft_troubleshooter.html
Any luck?

XML Page cannot be displayed error on interactive reports

Hi, I am having trouble with a user downloading an interactive report as a CSV output. When a user tries to download the interactive report (as it is displayed when the web page loads, no alterations), they are getting this error:
The XML Page cannot be displayed.
Cannot view XML input using XSL style sheet. Please correct the error and then click the refresh button, or try again later.
A name was started with an invalid character. Error processing resource 'http.............'.
This is only happening with a small group of users which doesn't include me, so it has been very hard to troubleshoot. I can download the report and open in Excel without any problems.
I am using Apex version 3.2 and IE 8. The user did not have multiple windows or tabs open logged into ApEx at the same time.
Has anyone ever had this problem before? I could not find a thread with the same issue.
Thanks!

i'm pretty sure that error comes up when your browser (ie, specifically, i believe) can't render the xml data it's received. i'm also pretty sure, as the full message implies, it's because it doesn't know what style sheet to use when you go to that page. in short, it's a browser config issue. one way to bypass it (to at least prove that it's a browser issue) would be to create a link to your page, right click the link, and do a "Save Target As...". the resulting file will be your valid XML one. fwiw, i've had better luck controlling the manner in which my xml data is received when i use mozilla or netscape (but i'd imagine there's just some setting you'd toggle in IE to avoid your issue).
hope this helps,
raj

XML page cannot be displayed?

Hi,
I'm getting this error message when trying to view the XML for a data template:
The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
A name was started with an invalid character. Error processing resource
<system name>
This is my Data Template:
<dataTemplate >
     <dataQuery>
          <sqlStatement name="Q1">
               <![CDATA[SELECT r.short_desc arec_type,
             NVL (t.short_desc, 'No Group') aprospect_group,
             p.prospect_id,
             t.hierarchy_order asort_order,
             DECODE (r.record_type_priority_value,
                     0, 99,
                     r.record_type_priority_value
                    ) asort_rec
        FROM prospect p,
             prospect_entity pe,
             entity e,
             tms_prospect_group t,
             tms_record_type r
       WHERE p.prospect_id = pe.prospect_id
         AND pe.id_number = e.id_number
         AND e.record_type_code = r.record_type_code
         AND p.prospect_group_code = t.prospect_group_code(+)
         AND p.active_ind = 'Y']]>
          </sqlStatement>
</dataQuery>
</dataTemplate>
Sorry if this is answered somewhere else. Couldn't find anything on it.
Thanks!

Hi..
Your data template should look something like below...
<dataTemplate name="dataTemplateName" description="Template description">
     <dataQuery>
          <sqlStatement name="Q_1">
               <![CDATA[SELECT r.short_desc arec_type,
NVL (t.short_desc, 'No Group') aprospect_group,
p.prospect_id,
t.hierarchy_order asort_order,
DECODE (r.record_type_priority_value,
0, 99,
r.record_type_priority_value
) asort_rec
FROM prospect p,
prospect_entity pe,
entity e,
tms_prospect_group t,
tms_record_type r
WHERE p.prospect_id = pe.prospect_id
AND pe.id_number = e.id_number
AND e.record_type_code = r.record_type_code
AND p.prospect_group_code = t.prospect_group_code(+)
AND p.active_ind = 'Y'
]]>
          </sqlStatement>
</dataQuery>
     <dataStructure>
          <group name="G_1" source="Q_1">
               <element name="short_desc arec_type" value="short_desc arec_type"/>
               <element name="aprospect_group" value="aprospect_group"/>
               <element name="prospect_id" value="prospect_id"/>
               <element name="asort_order" value="asort_order"/>
               <element name="asort_rec" value="asort_rec"/>
          </group>
     </dataStructure>
</dataTemplate>

XML page cannot be displayed - Servlet error

Hi,
I am trying to extract XML data from a source using a servlet.But i am getting this error when i run my servlet in IE :
The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
The download of the specified resource has failed. Error processing resource 'http://serverA.h.c.com:9300/p2pd/cog...
</dataset>
Can someone please guide me why i am getting this error? Here is the servlet code that i am using :
package com.cognos.demo;
import javax.servlet.http.*;
import java.io.*;
import com.cognos.developer.schemas.bibus._3.*;
import java.io.IOException;
import java.io.PrintWriter;
import javax.servlet.ServletException;
import javax.servlet.http.HttpServlet;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
* To change this generated comment edit the template variable "typecomment":
* Window>Preferences>Java>Templates.
* To enable and disable the creation of type comments go to
* Window>Preferences>Java>Code Generation.
public class XMLGenerator extends HttpServlet
     //Logging information goes here
      public void doGet(HttpServletRequest request, HttpServletResponse response) throws IOException
          response.setContentType ("text/html;charset=utf-8");
          response.setCharacterEncoding("utf-8");
          String xml = null;
          RunReport reportRunner= new RunReport();
          CRNConnect connect=new CRNConnect();
          String url="http://serverA.h.c.com:9300/p2pd/servlet/dispatch";
          String nameSpace="ADS_NS";
          String uid="cognos";
          String pwd="abcd45";
          Logon sessionLogon = null;
          int REP_XML=1;
          try {
          connect.connectToCognosServer(url);
          catch (Exception e)
               e.printStackTrace();
               //System.out.println("Not able to connect to Cognos Server");
               response.getWriter().print("Cannot connect to Cognos server");
          sessionLogon=new Logon();
          String logonOutputSource = "";
          String reportOutput=null;
          //Till the user gets logged in or he exits
          while (!Logon.loggedIn(connect)) {
               try
                    logonOutputSource = sessionLogon.quickLogon(connect,uid,pwd);
                    //System.out.println("Connected to the Cognos server..");
                    System.out.println(logonOutputSource);
               catch(Exception ex)
                    System.out.println("Error : Unknown host ");
               if (!Logon.loggedIn(connect)) {
                    response.getWriter().print("Unable to logon");
                    System.exit(0);
          //Report Processing here
          //String reportName=args[0].trim();
          //locate the selected report
          BaseClassWrapper selectedReport=null;
          selectedReport=reportRunner.findReport(connect);
          reportOutput=reportRunner.runReport(connect,selectedReport,REP_XML,false);
          xml=reportOutput;
          //System.out.println("Main:" + reportOutput);
          System.exit(0);
          try
               response.getWriter().print(xml);
               response.getWriter().flush();
          catch (IOException e)
               response.getWriter().print("Unable to publish xml");
               System.out.println(e);
}I am using some classes to extract xml data from a data source and retrieve that as a string and then i am displaying it using response object.
Any help in this regard would be highly appreciated.
Thanks,
Shishir.
Edited by: Invinc4u on Dec 15, 2008 6:56 AM

i'm pretty sure that error comes up when your browser (ie, specifically, i believe) can't render the xml data it's received. i'm also pretty sure, as the full message implies, it's because it doesn't know what style sheet to use when you go to that page. in short, it's a browser config issue. one way to bypass it (to at least prove that it's a browser issue) would be to create a link to your page, right click the link, and do a "Save Target As...". the resulting file will be your valid XML one. fwiw, i've had better luck controlling the manner in which my xml data is received when i use mozilla or netscape (but i'd imagine there's just some setting you'd toggle in IE to avoid your issue).
hope this helps,
raj

XML page cannot be displayed cannot view XML input using XSL style sheet Please correct the error and then click the REfresh

XML page cannot be displayed cannot view XML input using XSL style sheet Please correct the error and then click the REfresh

Is the error message displayed in Firefox or in IE, or in a customized window that doesn't identify the browser?
''If it displays in Firefox:''
It's possible that the Troubleshooter doesn't work correctly unless IE is your default browser. You could test that possibility by having IE make itself the default and testing the Troubleshooter again.
''If it displays in IE or embedded in another Microsoft application:''
In a web search I found these suggestions:
(1) Reset your Internet Explorer settings, according to http://answers.microsoft.com/en-us/ie/forum/ie8-windows_7/cannot-view-xml-using-xsl-style-sheet/ccfe80c6-c0db-4594-a7e3-475f9eac0e85
(2) Try the System File Checker, according to http://ask-leo.com/why_do_i_get_the_xml_page_cannot_be_displayed_after_running_a_microsoft_troubleshooter.html
Any luck?

Page cannot be displayed while running report in OAS (10.1.2.3)form/report

Hi All,
I have a report which take 4 hrs time to execute the report
If i run this 4 hrs report,the report runs sucessfully when we see in particular
report server in application server.
But, we wont get any pop up to open report after executing sucessfully
at user end, A error message is displayed in only report param page like,
"The page cannot be displayed"
I Think only param page is expired but not form session.
We have also set the parameters like in report/conf/repsername.conf
engineResponseTimeout=30 and <connection maxConnect="200" idleTimeOut="300">
Also,In httpd.conf timeout is 3600 and MaxBlockTimeout in web.xml file
we have set "maxBlockTime" for long running report (4h)
<init-param>
<param-name>maxBlockTime</param-name>
<param-value>12600000</param-value>
</init-param>
Please help me out to solve this issue.
Regards
Kirana

I am facing a similar problem. Did you find a solution to this problem?
Thanks
Karnail

Database home page cannot be displayed

Installed XE on Windows XP platform and getting page cannot be displayed.
http://127.0.0.1:8080/apex/
This is the oradim.log ..............
C:\oraclexe\app\oracle\product\10.2.0\server\bin\oradim.exe -startup -sid xe -usrpwd * -log oradim.log -nocheck 0
Fri Dec 07 22:35:59 2007
ORA-01078: failure in processing system parameters
ORA-01565: error in identifying file 'C:\oraclexe\app\oracle\product\10.2.0\server\dbs/spfileXE.ora'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
This is the cloneDBCreation.log ..............
SQL> startup nomount pfile="C:\oraclexe\app\oracle\product\10.2.0\server\config\scripts\init.ora";
ORA-12638: Credential retrieval failed
SQL> @C:\oraclexe\app\oracle\product\10.2.0\server\config\scripts\rmanRestoreDatafiles.sql;
SQL> set echo off;
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
ERROR:
ORA-12638: Credential retrieval failed
lsnrctl status displays the following ....
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
Start Date 08-DEC-2007 23:01:53
Uptime 0 days 0 hr. 7 min. 26 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File C:\oraclexe\app\oracle\product\10.2.0\server\network\admin\listener.ora
Listener Log File C:\oraclexe\app\oracle\product\10.2.0\server\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=xyz.company)(PORT=1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
tnsping xe displays the following .....
TNS Ping Utility for 32-bit Windows: Version 10.2.0.1.0 - Production on 09-DEC-2
007 00:35:30
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
C:\oraclexe\app\oracle\product\10.2.0\server\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = xyz.company)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME= XE)))
OK (30 msec)
Any suggestions? Thanks!

Several common issues
1) attempting to install without being administrator on the machine
2) attempting to install while being Domain administrator instead of local administrator
3) machine has DHCP address and Micorosft Loopback Adapter is not installed
4) Insufficient memory
5) Other Oracle stuff installed already
6) Other stuff installed that uses port 1521 and/or port 8080
7) XP Home
8) Not following the install instructions at http://www.oracle.com/pls/xe102/homepage
The list goes on, and on.

Outlook 2013: Your Automatic Reply Settings Cannot Be Displayed Because The Server Is Unavailable

When I configure the Outlook profile manually then receive warning "Your Automatic Reply Settings Cannot Be Displayed Because The Server Is Unavailable" when clicking "Automatic Replies (Out of Office)".
However if I use Autodiscover to configure the Outlook profile the above does not occur and "Automatic Replies (Out of Office)" works fine.
Client: Outlook 2013 Click-to-Run version 15.0.4551.1011 on Windows 7 Pro SP1.
Server: Exchange 2007 SP3 on Windows SBS 2008 SP2.

Hi,
First of all, please make sure you have installed this Outlook 2013 hotfix package (December 10, 2013):
http://support.microsoft.com/kb/2825652/en-us
It may fix the issue.
If the hotfix doesn't help, please note, this problem can occur after your primary SMTP address changes. The problem occurs because your previous primary SMTP address is cached in the Windows registry under your Outlook profile and this information does
not get refreshed for 24-48 hours after the SMTP address change.
So please make sure you have configured smtp address correctly, or, we can find some workarounds from the link below:
http://support.microsoft.com/kb/2693800/en-us
Regards,
Melon Chen
TechNet Community Support

Exchange 2007 / Outlook 2013 "Your Automatic Reply Settings Cannot Be Displayed Because The Server Is Unavailable"

One of our users is having problems setting replies from Outlook on his local PC. This is an SBS 2008 Server with Exchange 2007. The client PC is running Windows 8 with Outlook 2013. This issue doesn't seem to affect other users but this
is the only client with Outlook 2013.
When trying to set an automatic reply from within Outlook 2013 we get the "Your automatic reply settings cannot be displayed because the server is unavailable". Outlook seems to be connecting and working fine so connection to the server does
exist.
Trying this same operation from owa works without issue. Please let me know what we need to do to find a solution.
Thanks so much!

Problem:
IMAP downloads inbox don't work after November patches.
If you install a fresh OS and O2K13 unpatched ,the IMAP works fine.
Fully patched O2K10 works fine too.
It worked for my customer until November patch Tuesday broke the IMAP sync.
Consultant opened case.
Response from Microsoft:
        This is with regards to the issue faced by you due to regression         caused by November security update. This is further to inform         you
that fix is out and below is the download links for 32 bit         and 64 bit of the office suites. You need to apply all 3 hotfix.         The crash issue and IMAP issue would get resolved
immediately         while the issue related to Free / Busy and OOF not getting set         would take 24-36 hours to start working once the patch is
applied.
Below
        are the KB articles:
Description
        of the Outlook 2013 hotfix package (Outlook-x-none.msp):         December 10, 2013:
http://support.microsoft.com/kb/2825652
Description
        of the Word 2013 hotfix package (Word-x-none.msp): December 10,         2013:
http://support.microsoft.com/kb/2837674
Description
        of the Office 2013 hotfix package (       2013:
http://support.microsoft.com/kb/2849994
    Description of the Office 2013 hotfix package (   December 10, 2013:
    http://support.microsoft.com/kb/2849994
Issues that this hotfix package fixes
Consider the following scenario:
You have a SharePoint Server environment that has complex             workflows.
You implement the ReceiveTimeOut registry entry to             increase the global timeout to 90 seconds.
You click Open this task             button to open a workflow task in Outlook 2013.
        In this scenario, when you click any approval option from the         popup dialog box, you receive the following error message:
This task could not be updated at this               time.
When you reply or forward an email message by using inline         replies, you cannot use the Close and Delete method of Outlook         Visual Basic for Application. Additionally, you
receive the         following error message:
Run-time error '-2147467259               (80004005)': This method can't be used with an inline               response mail
item.
Consider the following scenario:
Assume that User A is located on an on-premises Exchange             Server, and User B is located on Cloud.
Both the on-premises Exchange Server and the Cloud enables             the Federation Trust.
User A share his own calendar to User B with Full Details             permission, and send the sharing invitation to User B.
User B opens the sharing invitation from User A, click             Open this Calendar, Outlook browses to the Calendar module             and opens
the shared calendar.
        In this scenario, the shared calendar does not show any content.
Consider the following scenario:
You install Outlook 2013 on Windows Server 2008 R2 or             Windows Server 2012 with Terminal Server Role installed.
You implement the Use Cached Exchange Mode for new and             Existing Outlook Profiles Group Policy settings and enable             it.
        In this scenario, when you open the           Outlook Account Settings window, and double-click the         Exchange
account, the Use Cached           Exchange Mode check box is not checked in the popup         dialog box.
Consider the following scenario:
You have an Exchange Server that has Public Folders.
You create the Outlook Security               Settings folder under
All               Public Folders.
You publish the AdminSecurityMode registry entry and set             to a value of 1.
You configure Outlook 2013 to use cached mode.
        In this scenario, when Outlook 2013 connects to Exchange Server,         Outlook crashes.
    Description of the Word 2013 hotfix package (Word-x-none.msp):     December 10, 2013:
    http://support.microsoft.com/kb/2837674
    Assume that you open a meeting request in a separate window in     Outlook 2013. When you click
Accept and     then click
Send Reply Now,     Outlook crashes.
    Description of the Outlook 2013 hotfix package (Outlook-x-none.msp):     December 10, 2013:
    http://support.microsoft.com/kb/2825652
Issues that this hotfix package fixes
Assume that you have a recurring appointment that does not         have a subject. You make some changes to one instance of the         appointment and then save the instance. When you
try to open or         delete the instance, Outlook may crash. Additionally, when you         drag-and-drop one instance of the appointment to a different
time in the calendar, Outlook may crash.
When you reply or forward an email message by using inline         replies, you cannot use the Close and Delete method of Outlook         Visual Basic for Application. Additionally, you
receive the         following error message:
Run-time error '-2147467259               (80004005)': This method can't be used with an inline               response mail
item.
Consider the following scenario:
Assume that User A has a mailbox that is located on an             on-premises Exchange Server, and User B has a mailbox that             is located
on Cloud.
Both the on-premises Exchange Server and the Cloud enable             the federation trust.
User A share his own calendar to User B with Full Details             permission, and send the sharing invitation to User B.
User B opens the sharing invitation from User A, click             Open this Calendar, Outlook browses to the Calendar module             and opens
the shared calendar.
        In this scenario, the shared calendar does not show any content.
Consider the following scenario:
You install Outlook 2013 on Windows Server 2008 R2 or             Windows Server 2012 with Terminal Server Role installed.
You implement the Use Cached               Exchange Mode for new and Existing Outlook Profiles             Group Policy
settings and enable it.
        In this scenario, when you open the           Outlook Account Settings window, and double-click the         Exchange
account, the Use Cached           Exchange Mode check box is not checked in the popup         dialog box.
Consider the following scenario:
You have an Exchange Server that has Public Folders.
You create the Outlook Security               Settings folder under
All               Public Folders.
You publish the AdminSecurityMode
registry entry and set to a value of 1.
You configure Outlook 2013 to use cached mode.
        In this scenario, when Outlook 2013 connects to Exchange Server,         Outlook crashes.
Consider the following scenario:
You have two Active Directory forests (Forest A and Forest             B).
User A and User B have their mailboxes that are located on             Forest A.
User A share his own calendar with User B with Full             Details permission.
User B add the shared calendar and let it sync.
You move User B’s mailbox to Forest B.
        In this scenario, the shared data in the shared calendar is         removed every second time that User A restarts Outlook. And it         is re-synced
when User A browses to the Calendar module.
Unfortunately TechNet isn't coming back, sorry folks :-(
The 3 patches above immediately fixed the issue for me!
Thanks so much!

Cannot calibrate displays

Similar Messages

Maybe you are looking for