Cannot Call Groups or Message?

There is no calling sounds and my group messages are unable to be read. This is a big issue because I cannot communicate with my contacts :/

What version of Skype are you using? Goto help >about Skype.
I'f you are using version 2.21 or below, uppgrade to the newest, if you are using 6.22 or above, downgrade to 6.21 found here:
http://download.skype.com/msi/SkypeSetup_6.21.0.104.msi
This is an attempt on a short answer, based on that Skype changed group chats in v 6.22 to cloudbased chats (eg type /get name in the groupchat, if it starts with 19: it's a new cloud chat, if it starts with #skypename it's an old p2p. (And new versions may have issues.)

Similar Messages

I dropped my iphone 5,1 week later suddenly my phone was restarted. After that I cannot call or receive messages. What should I do?

I dropped my iphone 5,1 week later suddenly my phone was restarted. After that I cannot call or receive any messages. I followed all the steps that was sudgested but it is still not working. It cannot recognize my Sim card and when Sim card is in it, IMEI number doesn't shown in settings. I don't understand how it is not possible to repair it when I dropped from 1 meters and even I didn't broke the screen. So, what should I do dear Apple family?

Hello dilara8,
Welcome to the Apple Support Communities!
I understand that you are seeing multiple issues with your iPhone after a drop. It sounds as though your device may need to be evaluated for service. For more information on this process, please refer to the attached link.
iPhone Repair and Service - Apple Support
Best,
Joe

I dropped my iphone 5. After that I cannot call or receive messages. What should I do?

I dropped my iphone 5,1 week later suddenly my phone was restarted. After that I cannot call or receive any messages. I followed all the steps that was sudgested but it is still not working. It cannot recognize my Sim card and when Sim card is in it, IMEI number doesn't shown in settings. I don't understand how it is not possible to repair it when I dropped from 1 meters and even I didn't broke the screen. So, what should I do dear Apple family?

The phone is obviously damaged. Take it in to an Apple Store or authorized service provider for evaluation and possible replacement.

Cannot send group texts/messages or voice texts.

I just bought my iPhone 6 Plus on December 27. Starting today for some reason, I cannot send group texts (iMessages or SMS texts) or voice texts. Please advise.

This doesn't really help me as much; I know how to send texts, and I am able to do so to individuals. It's just that I can't get group texts to go through. I have service and am sending to both iPhone users and non-iPhone users. Interestingly enough, a moment ago a particularly long text I tried to send to an individual non-iPhone user was not delivered. Does anyone know if there is some lingering issue with messaging on the iPhone 6 Plus? I have the latest iOS software update.

Have android, cannot receive group mms message from one specific iphone

I have a galaxy s4. My mom, dad, and sister, all have iphones. Whenever my family sends me a group message, I cannot receive any messages from my dad's phone. For example, if my mom sends a group message to my sister and me, I receive both of their messages. When she sends a group message to my dad and me, I only receive her messages, not my dad's.
Looking at the message history, group messages on my dad's iphone stay in imessage format (blue) even with my number as a recipient. On my mom's, the messages sent from her are green.
I can receive individual messages from my dad which are green.
I've checked the messaging settings on my dad's iphone and it completely matches my mom's messaging settings.
Is there any reason why his phone is staying in imessage format for group messages as compared to my mom's or my sisters?

I went through this after switching from iPhone to Android. I spent a couple of hours over a period of three days talking to Apple and Verizon support, trying everything they suggested. I finally got this info from a second-level Apple support rep: This is a known problem that will be fixed in some future release. Meanwhile, ask friends with iPhones to send you one-to-one messages, not group messages.

Out of the blue my iPhone 5 gave me this message, "No SIM detected." I cannot call or text non iPhone users.

OOut of the blue my iPhone 5 gave me this message, "No SIM detected." I cannot call or text non iPhone users.

Start here: If you see 'No SIM' alert on iPhone - Apple Support

I cannot send or receive group text messages as well as pictures messages / MMS. What should I do? The settings on Messages was set to receive group texts but it does not solve the problem.

I cannot send or receive group text messages and picture messages / MMS. The settings on Messages are already set to receive group texts but it does not help. What should I do?

Wow, 1yerdua. That's far too long to be having this messaging trouble. We want to find the resolution fast! If you turn off your Lumia's WiFi (Menu > Settings > WiFi), are you still able to access data-oriented applications like Internet Explorer? Have you been to other areas of the state/country and experienced the same trouble?
JenniferH_VZW
Follow us on Twitter www.twitter.com/vzwsupport

IOS 7 downloaded fine but I can't back up restored. Tried 3 times. Tried turning off iCloud. Now I can only receive texts and phone messages. I cannot make calls, retrieve phone messages or send any texts. When I try I just get a blank screen. HELP

I initially tried to do this at 11:39pm last night. I cleaned up my apps, backed up to my computer and then took the plunge. It downloaded fine, everything went ok until I tried to restore backup. I received a message that there was an error in iTunes and iPhone could not be restored. I tried this three times giving up at 2:00 am. I tried again at 7:30am. No fix. Now I can open up phone and browse in safari. I can get notifications that a text was received or a phone message left but I can't receive or make phone calls, retrieve phone messages, or access any text features. Also I have NO purchased apps. I use my phone got work and this has ruined my day - please help!!

I would start with going to O2 with the phone and making sure it's set up properly - maybe the SIM they gave you isn't quite right or their network isn't acknowleding it like it should.
Seeing as you've tried restoring to factory settings and resetting network settings, I'm assuming you've tried restoring the phone as new, just to see if that helped at all. If that didn't help, you definitely need to get in touch with O2 and work things out with them.
~Lyssa

Cannot delete groups in buddy list in messages

After deleting a group in Messages Buddy List, the group comes back into the buddy list next time Messages is launched. How do you delete permanently?

Hi,
In Messages > Preferences > General Section untick the items that says about gathering all lists into one.
Now use the Window Menu to display all the separate Buddy lists.
Which List is this Group in ? (I have never added a Group to a Buddy list but it is also a long time since I did a group chat outside of iMessages)
Exactly how are you trying to delete it ?
To Delete a Buddy means highlighting them and then using the Backspace key and confirming the same in a dialogue.
Sometimes a Buddy will stay if an account is logged in twice.
Make sure all accounts possibilities are logged out.
This will include Web Logins which can be logged in for up to 2 weeks if you don't specifically Log out..
The second use of the Budd List will keep putting the Buddy back.
I have this issues with one Buddy in a Google List
If I log in to the Web Mail page and look at the chat list he does not appear.
However in Messages he keeps coming back.
I have launched all three Macs I have in iChat and Messages and made sure he is deleted across all of them - that they are logged out and I delete him in the final Login - nothing seems to work.
As far as I can tell from the web login this person has only emailed me.
Both Google and AIM have a 2 week default Login period if your don't log out before quitting the web page.
Don't forget Phones and work computers.
9:09 pm Saturday; April 18, 2015
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

When bluetooth headset is connected to iphone,I can't hear iphone ringing aloud when I have a call or a text. Do i really have to wear the bluetooth headset all the time in my ear to know when I have a call or a message? Why it doesnt ring through iphone?

when bluetooth headset is connected to iphone,I can't hear iphone ringing aloud when I have a call or a text. Do i really have to wear the bluetooth headset all the time in my ear to know when I have a call or a message? Why it doesnt ring through iphone but it rings through the bluetooth headsets?
In other phones, you can hear the phone ringing and if it was connected to bluetooth, you could pick up the call from the bluetooth headset.
Here with iphone, if its connected to bluetooth headset, it only rings through the headset, which means that if you dont have the headset in the ear all the time, you cannot know that you have an incoming call or message.
Any ideas - solutions - comments please?

I'm having the same problem. I had a plantronics 975 (which I lost, sadly). When connected, the ringer would always be routed through the bluetooth and the iPhone's external speaker. When in silent mode, the iPhone would only vibrate, but I could still hear the ringer in the bluetooth.
I just bought a new Plantronics Voyager+. Now when it's connected, all sounds are routed to the earpiece - including the taps, etc. The iPhone's speaker doesn't ring at all, unless the bluetooth is disconnected or powered off. I'd really like to be able to hear both, like I was before. This is an iPhone 3G running iOS 4 (latest version, not sure what it is exactly). Haven't updated software/firmware in between bluetooths, just changed the earpiece.

Facetime cannot call my contacts after upgrading to iOS 8

My Son
Is getting frustrated that he cannot call any of his friends on Facetime after upgrading to iOS 8.
We have reset all his settings, gone through the 11 troubleshooting steps here:
http://www.macworld.co.uk/how-to/iphone/11-fixes-for-when-facetime-is-not-workin g-3527872/
Also we have restarted the device several times and updated to 8.0.2.
Any suggestions on how we can fix this?
Thanks,

Can you receive FT calls?
What exactly happens when you try to call someone with FT? Error message?
Have you tried when connected to another network?

TS3367 I have two IPhones and one IPad all with the same Apple ID. I can call facetime between the two IPhones, but I cannot call the IPAD from either of the IPhones and when I call my IPhone from the IPad it rings my wife's IPhone after briefly calling m

I have two IPhones and one IPad all with the same Apple ID. I can call facetime between the two IPhones, but I cannot call the IPAD from either of the IPhones and when I call my IPhone from the IPad it rings my wife's IPhone after briefly calling mine.

Each device needs a separate address. Use an email address (gmail.com) on the iPad.
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
 Cheers, Tom

Is there a way to send a group text message to more than 10 recepients?

Is it possible to send a group text message to more than 10 recipients? I called AT&T tech support and they said the phone's software limits group messages to no more than 10.

Apple does not explain why it makes the choices it does, nor will you get a response
from Apple on this forum. You can make Apple aware of your thoughts at
www.apple.com/feedback Your message will be read, but not answered.
AFAIK, there is no way to increase the limit of the native app. Use a 3rd party app if that
function is important to you. Others have expressed similar frustration in the past and
have chosen another app to fill their needs.

Sony BRAVIA Call failed error message

I'm trying to use Skype on a Sony BRAVIA TV and with the CMU-BR100 camera installed. I cannot make a video or telephone call to another skype user. I get call failed error message for both video and telephone. Do I need to buy Skype credits to be able to use Skype ??

Shorty wrote:
Can anyone experiencing the 'call failed' issue comment on whether the problem occurs 100% of the time, or is it always within the first 10 minutes after powering on the TV?
Sorry.... Maybe I'm a bit thick, but do you mean 1/ switch the TV on and try Skype after 10 minutes? Or 2/ Try Skype within the 10 minutes? I'm happy to help with research if I can, even though I don't even switch this TV on anymore!
My issue is constant. I.E. I turn the power off at the socket, wait at least 10 seconds, turn on, start the TV and make a Skype call. That works..... ONCE. If I try to call a second contact, it gives the "call failed" message, without even waiting for any type of connection, or pausing for any timeout. If anyone tries to contact me, they get a "busy" message.
To be honest, I've not tried leaving the TV on for a while before trying. If I've nothing better to do over the next few days, I'll try that. I'm not that interested in it anymore. In fact... I don't like to see that TV in my living room and don't even use it!
Skype on my phone works better, with better video and sound quality. That's where I'm at.....
Maybe I'm on a downer tonight...

BINDING.JCA-12510 JCA Resource Adapter - Cannot call rollback when using di

Hi,
i'm facing a simillar issue with dbadapter while trying to insert a record.
The issue that I'm facing is: (BINDING.JCA-12563)
Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'insert' failed due to: DBWriteInteractionSpec Execute Failed Exception. insert failed. Descriptor name: http://InsertEmployee.TestEmp. Caused by java.sql.SQLException: Cannot call rollback when using distributed transactions. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution.
I faced the same issues that have been posted in this thread before but this is a new one I'm seeing.
Following are the configurations that I'm using.
WEBLOGIC ADMIN CONSOLE
JDBC datasources
General tab:
JNDI Name: jdbc/SOADataSource
Connection Pool tab:
URL - jdbc:oracle:thin:@localhost:1522/XE
Driver Class Name - oracle.jdbc.xa.client.OracleXADataSource
Properties - user=SATRA_SOAINFRA
oracle.net.CONNECT_TIMEOUT=10000
Deployments
Inside DbAdapter - Configuration
The general tab shows blank values for 'Native lib dir' and 'JNDI name' fields. Is this normal or I need to populate values into these.
Inside Outbound Connection Pools the javax.resource.cci.ConnectionFactory created an entry 'eis/DB/10gXE_DBCon'
following is the settings for dataSourceName property
dataSourceName java.lang.String jdbc/SOADataSource
I have kept the value for xADataSourceName as blank as giving the same value of 'jdbc/SOADataSource' throws error.
The JNDI value that I'm using while creating the database adapter from Jdev is eis/DB/10gXE_DBCon where 10gXE_DBCon is the database connection name.
Can you please tell me what is the issue and where I'm going wrong.
Thanks in advance,
Satrajit

Hi Sunil,
I followed your advice and did the changes, that error has gone but a new error is popping up.
BINDING.JCA-12563 Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'insert' failed due to: DBWriteInteractionSpec Execute Failed Exception. insert failed. Descriptor name: [InsertEmployee.TestEmp]. Caused by java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist . ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution.
The name of the table i'm inserting to is test_emp and it exists in the database.
the .jca file for dbadsapter is like
<adapter-config name="FileToDB_DBAdp" adapter="Database Adapter" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/DB/10gXE_DBCon" UIConnectionName="10gXE_DBCon" adapterRef=""/>
<endpoint-interaction portType="FileToDB_DBAdp_ptt" operation="insert">
<interaction-spec className="oracle.tip.adapter.db.DBWriteInteractionSpec">
<property name="DescriptorName" value="FileToDB_DBAdp.TestEmp"/>
<property name="DmlType" value="insert"/>
<property name="MappingsMetaDataURL" value="FileToDB_DBAdp-or-mappings.xml"/>
<property name="DetectOmissions" value="true"/>
<property name="GetActiveUnitOfWork" value="false"/>
</interaction-spec>
</endpoint-interaction>
</adapter-config>
and the .xsd file for dbadapter is
<?xml version = '1.0' encoding = 'UTF-8'?>
<xs:schema targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/db/top/FileToDB_DBAdp" xmlns="http://xmlns.oracle.com/pcbpel/adapter/db/top/FileToDB_DBAdp" elementFormDefault="qualified" attributeFormDefault="qualified" xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:element name="TestEmpCollection" type="TestEmpCollection"/>
<xs:complexType name="TestEmpCollection">
<xs:sequence>
<xs:element name="TestEmp" type="TestEmp" minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="TestEmp">
<xs:sequence>
<xs:element name="empid" type="xs:decimal" nillable="true"/>
<xs:element name="name" type="xs:string" minOccurs="0" nillable="true"/>
<xs:element name="designation" minOccurs="0" nillable="true">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="50"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="salary" type="xs:decimal" minOccurs="0" nillable="true"/>
<xs:element name="deptno" type="xs:decimal" minOccurs="0" nillable="true"/>
</xs:sequence>
</xs:complexType>
</xs:schema>
If I change element name from 'TestEmp' to 'Test_Emp' in the .xsd file,
I'm getting the following issue ...
Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'insert' failed due to: Could not create/access the TopLink Session. This session is used to connect to the datastore. Caused by java.lang.NullPointerException. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution.
I'm confused why does it take the table name as TestEmp and not as Test_Emp.
Regards,
Satrajit

Cannot Call Groups or Message?

Similar Messages

Maybe you are looking for