Cannot call Voicemail?

For some reason today, when I dial *86, it says "Your call cannot be completed as dialed, please hang up...etc". I am manually dialling *86 OR using my phone's automatic shortcut.
Is there something wrong with Verizon's VM service, or is it just me?

I work for an indirect Verizon agent and I've run across this quite a few times. What happens is that call forwarding accidentally gets put on. Most likely it is from a glitch on Verizon's end, but it's easy to undo. All you have to do is reset it. Take the phone that is having the problems and from it dial *73 You will hear a couple of beeps in your ear and that will tell you it has been reset. If you or someone tries to leave a voice mail now, it should go through fine. If this doesn't help then there is something more going on and you will have to call customer service at *611 or 800-922-0204.

Similar Messages

Cannot receive voicemails unless I call my number

Cannot receive voicemail after I deleted old messages I have to call my phone number to get voicemail

voicemail is a carrier feature, give them a call to resolve.

New iPhone cannot get voicemail to set up?

I have a new iPhone 4s and I cannot get voicemail to set up?

Go the the Phone app and select keypad. Press and hold the 1 key to initiate a call to Voicemail. Then Administrative Options > Passwords > Turn Password on or off > Voicemail password OFF.

Jabber for Windows Call Voicemail Option Pulls Outlook Contact with Matching digits of VM Pilot

Running J4W 9.2.2 and when we use the "Call Voicemail" option (we use a 4-digit pilot number), if the end user has an outlook contact that the last 4 of the phone number matches it pulls the outlook contacts name up and displays it in the connected call. Anyone else seen this behaviour and f so is this a known issue and is there a workaround for this?
Thanks,
Ethan

I Ethan,
I have this problem too. There was a Bug (CSCud57201) identified for release 9.1 with this problem. The bug notes say it should be solved on 9.2 but I'm running the same version as you and having exactly the same last digits match problem
Rui

Facetime cannot call my contacts after upgrading to iOS 8

My Son
Is getting frustrated that he cannot call any of his friends on Facetime after upgrading to iOS 8.
We have reset all his settings, gone through the 11 troubleshooting steps here:
http://www.macworld.co.uk/how-to/iphone/11-fixes-for-when-facetime-is-not-workin g-3527872/
Also we have restarted the device several times and updated to 8.0.2.
Any suggestions on how we can fix this?
Thanks,

Can you receive FT calls?
What exactly happens when you try to call someone with FT? Error message?
Have you tried when connected to another network?

TS3367 I have two IPhones and one IPad all with the same Apple ID. I can call facetime between the two IPhones, but I cannot call the IPAD from either of the IPhones and when I call my IPhone from the IPad it rings my wife's IPhone after briefly calling m

I have two IPhones and one IPad all with the same Apple ID. I can call facetime between the two IPhones, but I cannot call the IPAD from either of the IPhones and when I call my IPhone from the IPad it rings my wife's IPhone after briefly calling mine.

Each device needs a separate address. Use an email address (gmail.com) on the iPad.
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
 Cheers, Tom

Payment delivered but still cannot call

payment delivered but still cannot call. Why?

Here are some things you can do -
https://support.skype.com/en/faq/FA50/i-just-purchased-skype-credit-but-i-cannot-make-any-calls
Yet, if still needed, you can also contact customer support for further assistance or instructions. Just open the link pasted below to see the instructions on how to get in touch with customer service -
https://support.skype.com/en/faq/FA1170/how-can-i-contact-skype-customer-service
IF YOU FOUND OUR POST USEFUL THEN PLEASE GIVE "KUDOS". IF IT HELPED TO FIX YOUR ISSUE PLEASE MARK IT AS A "SOLUTION" TO HELP OTHERS. THANKS!
ALTERNATIVE SKYPE DOWNLOAD LINKS | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUSPICIOS CALLS AND MESSAGES

Payment gone through but cannot call

payment for this month has gone through but I cannot call. Please can someone help? Thanks
Solved!
Go to Solution.

Hi,
I checked your account and found that the minutes have now been replenished.
For future reference, although the recurring payment is taken three days in advance to avoid possible delays, your subscription minutes are reset based on the initial purchase date and time.
For example, if you purchase a Germany 400 minutes subscription on the 15th at 15.00 GMT, then your recurring payment will be taken on the 12th and the minutes reset on the 15th of the following month at 15.00 GMT.
You can check when your minutes will be reset from your order details:
1. Go to https://secure.skype.com/account/purchase/history/orders
2. Find the first order for your subscription (not the recurring payment)
3. Click the order ID. The transaction date shows when your subscription was purchased.
You may also want to refer to this link to know more about how subscriptions work: https://support.skype.com/en/faq/FA10414/
Hope this helps.
Julian

Java.sql.SQLException: Cannot call rollback when using distributed transac

Hi all,
I am getting the below exception trace when I tried to rollback the data in WLI.I am getting the db connection Object from DBControl.
java.sql.SQLException: Cannot call rollback when using distributed transactions
at weblogic.jdbc.wrapper.JTAConnection.rollback(JTAConnection.java:313)
at controls.DailyFeedFileJavaImpl.excuteBatch(DailyFeedFileJavaImpl.jcs:
904)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.bea.wlw.runtime.core.dispatcher.DispMethod.invoke(DispMethod.java
:371)
at com.bea.wlw.runtime.core.container.Invocable.invoke(Invocable.java:42
3)
at com.bea.wlw.runtime.core.container.Invocable.invoke(Invocable.java:39
6)
at com.bea.wlw.runtime.jcs.container.JcsProxy.invoke(JcsProxy.java:381)
at $Proxy59.excuteBatch(Unknown Source)
at QnbDailyFeedProcess.feedFileJavaObjExcuteBatch(QnbDailyFeedProcess.jp
d:274)
at QnbDailyFeedProcess_wf$ImplControlSend15.invoke(QnbDailyFeedProcess_w
f.java:146)
at com.bea.wli.bpm.runtime.Perform.execute(Perform.java:32)
at com.bea.wli.bpm.runtime.ProcessState.executeInternalCallback(ProcessS
tate.java:726)
at QnbDailyFeedProcess_wf$_ProcessState.executeInternalCallback(QnbDaily
FeedProcess_wf.java:311)
at com.bea.wli.bpm.runtime.ProcessState.executeInternalCallback(ProcessS
tate.java:685)
at com.bea.wli.bpm.runtime.ProcessState.processNodeOrchestration(Process
State.java:681)
at sun.reflect.GeneratedMethodAccessor193.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.bea.wlw.runtime.core.dispatcher.DispMethod.invoke(DispMethod.java
:371)
at com.bea.wli.bpm.runtime.JpdInternalDispMethod.invoke(JpdInternalDispM
ethod.java:87)
at com.bea.wlw.runtime.core.container.Invocable.invoke(Invocable.java:42
3)
at com.bea.wlw.runtime.core.container.Invocable.invoke(Invocable.java:39
6)
at com.bea.wlw.runtime.core.container.Invocable.invoke(Invocable.java:24

shanmuga gomathi nayagam wrote:
Hi all,
I am getting the below exception trace when I tried to rollback the data in WLI.I am getting the db connection Object from DBControl.
java.sql.SQLException: Cannot call rollback when using distributed transactions
at weblogic.jdbc.wrapper.JTAConnection.rollback(JTAConnection.java:313)Hi, Ideally, you should obtain the Transaction object and roll it back/ set it
to rollback only.
Joe
at controls.DailyFeedFileJavaImpl.excuteBatch(DailyFeedFileJavaImpl.jcs:
904)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.bea.wlw.runtime.core.dispatcher.DispMethod.invoke(DispMethod.java
:371)
at com.bea.wlw.runtime.core.container.Invocable.invoke(Invocable.java:42
3)
at com.bea.wlw.runtime.core.container.Invocable.invoke(Invocable.java:39
6)
at com.bea.wlw.runtime.jcs.container.JcsProxy.invoke(JcsProxy.java:381)
at $Proxy59.excuteBatch(Unknown Source)
at QnbDailyFeedProcess.feedFileJavaObjExcuteBatch(QnbDailyFeedProcess.jp
d:274)
at QnbDailyFeedProcess_wf$ImplControlSend15.invoke(QnbDailyFeedProcess_w
f.java:146)
at com.bea.wli.bpm.runtime.Perform.execute(Perform.java:32)
at com.bea.wli.bpm.runtime.ProcessState.executeInternalCallback(ProcessS
tate.java:726)
at QnbDailyFeedProcess_wf$_ProcessState.executeInternalCallback(QnbDaily
FeedProcess_wf.java:311)
at com.bea.wli.bpm.runtime.ProcessState.executeInternalCallback(ProcessS
tate.java:685)
at com.bea.wli.bpm.runtime.ProcessState.processNodeOrchestration(Process
State.java:681)
at sun.reflect.GeneratedMethodAccessor193.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.bea.wlw.runtime.core.dispatcher.DispMethod.invoke(DispMethod.java
:371)
at com.bea.wli.bpm.runtime.JpdInternalDispMethod.invoke(JpdInternalDispM
ethod.java:87)
at com.bea.wlw.runtime.core.container.Invocable.invoke(Invocable.java:42
3)
at com.bea.wlw.runtime.core.container.Invocable.invoke(Invocable.java:39
6)
at com.bea.wlw.runtime.core.container.Invocable.invoke(Invocable.java:24

Cannot call ANY stored functions from my Java program

My problem is that I cannot call ANY stored procedure from my Java
program. Here is the code for one of my stored procedures which runs
very well in PL/SQL:
PL/SQL code:
CREATE OR REPLACE PACKAGE types AS
TYPE cursorType IS REF CURSOR;
END;
CREATE OR REPLACE FUNCTION list_recs (id IN NUMBER)
RETURN types.cursorType IS tracks_cursor types.cursorType;
BEGIN
OPEN tracks_cursor FOR
SELECT * FROM accounts1
WHERE id = row_number;
RETURN tracks_cursor;
END;
variable c refcursor
exec :c := list_recs(11)
SQL> print c
COLUMN1 A1 ROW_NUMBER
rec_11 jacob 11
rec_12 jacob 11
rec_13 jacob 11
rec_14 jacob 11
rec_15 jacob 11
Here is my Java code:
import java.sql.*;
import java.io.*;
import oracle.jdbc.driver.*;
class list_recs
public static void main(String args[]) throws SQLException,
IOException
String query;
CallableStatement cstmt = null;
ResultSet cursor;
// input parameters for the stored function
String user_name = "jacob";
// user name and password
String user = "jnikom";
String pass = "jnikom";
DriverManager.registerDriver(new oracle.jdbc.OracleDriver());
try { Class.forName ("oracle.jdbc.driver.OracleDriver"); }
catch (ClassNotFoundException e)
{ System.out.println("Could not load driver"); }
Connection conn =
DriverManager.getConnection (
"jdbc:oracle:thin:@10.52.0.25:1521:bosdev",user,pass);
try
String sql = "{ ? = call list_recs(?) }";
cstmt = conn.prepareCall(sql);
// Use OracleTypes.CURSOR as the OUT parameter type
cstmt.registerOutParameter(1, OracleTypes.CURSOR);
String id = "11";
cstmt.setInt(2, Integer.parseInt(id));
// Execute the function and get the return object from the call
cstmt.executeQuery();
ResultSet rset = (ResultSet) cstmt.getObject(1);
while (rset.next())
System.out.print(rset.getString(1) + " ");
System.out.print(rset.getString(2) + " ");
System.out.println(rset.getString(3) + " ");
catch (SQLException e)
System.out.println("Could not call stored function");
e.printStackTrace();
return;
finally
cstmt.close();
conn.close();
System.out.println("Stored function was called");
Here is how I run it, using Win2K and Oracle9 on Solaris:
C:\Jacob\Work\Java\Test\Vaultus\Oracle9i\FunctionReturnsResultset>java
list_recs
Could not call stored function
java.sql.SQLException: ORA-00600: internal error code, arguments:
[ttcgcshnd-1], [0], [], [], [], [], [], []
at
oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:168)
at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:208)
at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:543)
at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1405)
at oracle.jdbc.ttc7.TTC7Protocol.fetch(TTC7Protocol.java:889)
at
oracle.jdbc.driver.OracleStatement.<init>(OracleStatement.java:490)
at
oracle.jdbc.driver.OracleStatement.getCursorValue(OracleStatement.java:2661)
at
oracle.jdbc.driver.OracleStatement.getObjectValue(OracleStatement.java:4189)
at
oracle.jdbc.driver.OracleStatement.getObjectValue(OracleStatement.java:4123)
at
oracle.jdbc.driver.OracleCallableStatement.getObject(OracleCallableStatement.java:541)
at list_recs.main(list_recs.java:42)
C:\Jacob\Work\Java\Test\Vaultus\Oracle9i\FunctionReturnsResultset>
Any help is greatly appreciated,
Jacob Nikom

Thank you for your suggestion.
I tried it, but got the same result. I think the difference in the syntax is due to the Oracle versus SQL92 standard
conformance. Your statament is the Oracle version and mine is the SQL92. I think both statements are acceptable
by the Oracle.
Regards,
Jacob Nikom

I can call from Branch through Gatekeeper to CUCM. But cannot call from CUCM through Gatekeeper to any Branche.

Hello All,
I can Call from any Branch office to CUCM through Gatekeeper. But I cannot call from CUCM through Gatekeeper to any Branch.
My CUCM version is 9.1.2
Regards
Bahlul

Do you see anything shw up on the debugs on the branch router?
Check debug h225 asn1 to see if there is a setup coming from the CUCM. If not, that means the CUCM is not receiving the IP address of the branch gateway from the GK. This could mean a config issue on the GK with respect to the branch gateways, or on the UCM.
Take debug gatekeeper main 10 from the gatekeeper. These debugs will show what's happening on the GK while processing the incoming ARQ from CUCM.
Also please upload the config of the GK, branch gateway here.
Hantale
Sree

BINDING.JCA-12510 JCA Resource Adapter - Cannot call rollback when using di

Hi,
i'm facing a simillar issue with dbadapter while trying to insert a record.
The issue that I'm facing is: (BINDING.JCA-12563)
Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'insert' failed due to: DBWriteInteractionSpec Execute Failed Exception. insert failed. Descriptor name: http://InsertEmployee.TestEmp. Caused by java.sql.SQLException: Cannot call rollback when using distributed transactions. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution.
I faced the same issues that have been posted in this thread before but this is a new one I'm seeing.
Following are the configurations that I'm using.
WEBLOGIC ADMIN CONSOLE
JDBC datasources
General tab:
JNDI Name: jdbc/SOADataSource
Connection Pool tab:
URL - jdbc:oracle:thin:@localhost:1522/XE
Driver Class Name - oracle.jdbc.xa.client.OracleXADataSource
Properties - user=SATRA_SOAINFRA
oracle.net.CONNECT_TIMEOUT=10000
Deployments
Inside DbAdapter - Configuration
The general tab shows blank values for 'Native lib dir' and 'JNDI name' fields. Is this normal or I need to populate values into these.
Inside Outbound Connection Pools the javax.resource.cci.ConnectionFactory created an entry 'eis/DB/10gXE_DBCon'
following is the settings for dataSourceName property
dataSourceName java.lang.String jdbc/SOADataSource
I have kept the value for xADataSourceName as blank as giving the same value of 'jdbc/SOADataSource' throws error.
The JNDI value that I'm using while creating the database adapter from Jdev is eis/DB/10gXE_DBCon where 10gXE_DBCon is the database connection name.
Can you please tell me what is the issue and where I'm going wrong.
Thanks in advance,
Satrajit

Hi Sunil,
I followed your advice and did the changes, that error has gone but a new error is popping up.
BINDING.JCA-12563 Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'insert' failed due to: DBWriteInteractionSpec Execute Failed Exception. insert failed. Descriptor name: [InsertEmployee.TestEmp]. Caused by java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist . ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution.
The name of the table i'm inserting to is test_emp and it exists in the database.
the .jca file for dbadsapter is like
<adapter-config name="FileToDB_DBAdp" adapter="Database Adapter" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/DB/10gXE_DBCon" UIConnectionName="10gXE_DBCon" adapterRef=""/>
<endpoint-interaction portType="FileToDB_DBAdp_ptt" operation="insert">
<interaction-spec className="oracle.tip.adapter.db.DBWriteInteractionSpec">
<property name="DescriptorName" value="FileToDB_DBAdp.TestEmp"/>
<property name="DmlType" value="insert"/>
<property name="MappingsMetaDataURL" value="FileToDB_DBAdp-or-mappings.xml"/>
<property name="DetectOmissions" value="true"/>
<property name="GetActiveUnitOfWork" value="false"/>
</interaction-spec>
</endpoint-interaction>
</adapter-config>
and the .xsd file for dbadapter is
<?xml version = '1.0' encoding = 'UTF-8'?>
<xs:schema targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/db/top/FileToDB_DBAdp" xmlns="http://xmlns.oracle.com/pcbpel/adapter/db/top/FileToDB_DBAdp" elementFormDefault="qualified" attributeFormDefault="qualified" xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:element name="TestEmpCollection" type="TestEmpCollection"/>
<xs:complexType name="TestEmpCollection">
<xs:sequence>
<xs:element name="TestEmp" type="TestEmp" minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="TestEmp">
<xs:sequence>
<xs:element name="empid" type="xs:decimal" nillable="true"/>
<xs:element name="name" type="xs:string" minOccurs="0" nillable="true"/>
<xs:element name="designation" minOccurs="0" nillable="true">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="50"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="salary" type="xs:decimal" minOccurs="0" nillable="true"/>
<xs:element name="deptno" type="xs:decimal" minOccurs="0" nillable="true"/>
</xs:sequence>
</xs:complexType>
</xs:schema>
If I change element name from 'TestEmp' to 'Test_Emp' in the .xsd file,
I'm getting the following issue ...
Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'insert' failed due to: Could not create/access the TopLink Session. This session is used to connect to the datastore. Caused by java.lang.NullPointerException. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution.
I'm confused why does it take the table name as TestEmp and not as Test_Emp.
Regards,
Satrajit

Cannot call member function on object type

On 8.1.6 I cannot call a member function from SQL in the way described in the manual.
The following example is almost copied from the manual:
create or replace TYPE foo AS OBJECT (a1 NUMBER,
MEMBER FUNCTION getbar RETURN NUMBER);
create or replace type body foo is
MEMBER FUNCTION getbar RETURN NUMBER is
begin
return 45;
end;
end;
CREATE TABLE footab(col foo);
SELECT col,foo.getbar(col) FROM footab; -- OK
select col,col.getbar() from footab; -- ERROR
The second select is the way it should be, but I get an error "invalid column name".
Using the first select, I get the result. This is strange because this is more or less the 'static member' notation (filling in the implicit self parameter myself).
Is this a known bug in 8.1.6, maybe fixed in later versions?

Konstantin,
Did you use loadjava to load the compiled class into the Oracle Database?
Regards,
Geoff
Hello!
I need to write a member function for object type with java.
for example:
create type test as object(
id number,
name varchar2(20),
member function hallo return number);
create type body test as
member function hallo return number
as language java
name 'test.hallo() return int;
create table test of test;
My java-file is:
public class test {
public int hallo() {
return 5;
select t.hallo() from test t;
It's does not run. Why?
I get always an error back. Wrong types or numbers of parameters!!
please help me.
thanks in advance
Konstantin

IllegalStateException: strict servlet API: cannot call getWriter()

I am getting an exception in Weblogic when I am trying to display a pdf file in a web page.
java.lang.IllegalStateException: strict servlet API: cannot call getWriter() after getOutputStream()
I am using the following code code
ByteArrayOutputStream baos;
ServletOutputStream out = response.getOutputStream();
baos.writeTo(out);
I have seen this error in so many discussion forum and there is no proper solution for this error.
I am able to see the pdf page even with this exception. But I want to get rid of this exception also from Weblogic.

I just did a quick (and dirty!) test with the following to display a jpg image and it worked for me without any trace of an exception:
    @Override
    protected void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {
        response.setContentType("image/jpg");
        File f = new File("/Users/me/Desktop/IMG_0032.JPG");
        byte[] bits = new byte[(int) f.length()];
        FileInputStream fos = new FileInputStream(f);
        fos.read(bits);
        ByteArrayOutputStream baos = new ByteArrayOutputStream();
        baos.write(bits, 0, bits.length);
        baos.writeTo(response.getOutputStream());
        baos.close();
        fos.close();
    }Note that there is no call anywhere to response.getWriter() in that.
I'd guess the exception is directing you at what the problem is, at least as the server is seeing it -- somewhere in the execution of the request path there would appear to be call to response.getWriter() occurring after a call to response.getOutputStream() has been called, which is not permitted on WLS according to the error message.
Do you use filters on this app? If response.getWriter() has been called on the same response object in a post request filter phase, that would be on the same call path with the same response object and would result in the exception.
-steve-

Parsing failed: TypeError: Cannot call method "replace"

Hi,
when i troubleshooting my collector, sentinel GUI message prompt
following:
Parsing failed: TypeError: Cannot call method "replace" of undefined;
input:
my release.js is following:
Collector.prototype.initialize = function() {
this.PARSER.getOffsetData = function(input) {
if (typeof input.RXMap != "undefined") {
return input.RXMap.REQUEST_TM;
conn.addParser(this.PARSER.getOffsetData);
return true;
Collector.prototype.cleanup = function() {
return true;
Connector.prototype.sendQuery = function() {
return true;
Record.prototype.preParse = function(e) {
if (this.CONNECTION_ERROR != null || typeof this.RXMap == "undefined")
{ return false; }
if (this.CONNECTION_METHOD == "DATABASE") {
for (var field in this.RXMap) {
this[field] = this.RXMap[field];
return true;
Record.prototype.parse = function(e) {
var detstring =
this.RXMap.REQUEST_TM.replace(/(\d+)\/(\d+)\/(\d{4})\s(\S+)/g, '$1/$2/$3
$4 GMT');
var dt = new Date(detstring);
e.ObserverEventTime(dt);
return true;
Record.prototype.normalize = function(e) {
instance.SEND_EVENT =true;
return true;
Record.prototype.postParse = function(e) {
return true;
Record.prototype.reply = function(e) {
return true;
my sqlquery.base is following:
SELECT TOP 100 * FROM TS_QUERYBILLSIGNED_LOG WHERE REQUEST_TM > %s
My table sample is following:
CUSTCODE,BEGIN_TM,END_TM,PAGEINDEX,QUERYTYPE,SYSTE MNAME,SIGNEDTYPE,CLIENTIP,CLIENTMAC,CLIENTNAME,MET HODNAME,REQUEST_TM,ANSWER_TM,ANSWER_TOTAL,ANSWER_C URRENTCOUNT,LOG_ID,WAYBILL_NOS
8710294837,12/30/2013,1/2/2014
23:59,0,0,CSS-CLIENT,0,221.213.26.241,6C-F0-49-CD-2C-CD,a0af75ce888346e,waybillSingedTotal,1/3/2014
14:50,1/3/2014 14:50,28,4,433676211,
My table Schema is following:
USE [sfere]
GO
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[ts_querybillsigned_log](
[CUSTCODE] [varchar](20) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[BEGIN_TM] [datetime] NULL,
[END_TM] [datetime] NULL,
[PAGEINDEX] [varchar](20) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[QUERYTYPE] [varchar](20) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[SYSTEMNAME] [varchar](20) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[SIGNEDTYPE] [varchar](20) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[CLIENTIP] [varchar](200) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[CLIENTMAC] [varchar](200) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[CLIENTNAME] [varchar](500) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[METHODNAME] [varchar](20) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[REQUEST_TM] [datetime] NULL,
[ANSWER_TM] [datetime] NULL,
[ANSWER_TOTAL] [numeric](20, 0) NULL,
[ANSWER_CURRENTCOUNT] [numeric](20, 0) NULL,
[LOG_ID] [numeric](30, 0) NOT NULL,
[WAYBILL_NOS] [varchar](400) COLLATE SQL_Latin1_General_CP1_CI_AS NULL
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
Thanks
Best Regards!
Steve zeng
steve_zeng
steve_zeng's Profile: https://forums.netiq.com/member.php?userid=3875
View this thread: https://forums.netiq.com/showthread.php?t=50290

steve_zeng;242145 Wrote:
> Hi,
>
> when i troubleshooting my collector, sentinel GUI message prompt
> following:
>
>
> Parsing failed: TypeError: Cannot call method "replace" of undefined;
> input:
>
> my release.js is following:
> ----------------------------------------------------------------------
> Collector.prototype.initialize = function() {
> this.PARSER.getOffsetData = function(input) {
> if (typeof input.RXMap != "undefined") {
> return input.RXMap.REQUEST_TM;
> }
> };
> conn.addParser(this.PARSER.getOffsetData);
> return true;
> };
>
> Collector.prototype.cleanup = function() {
> return true;
> };
>
>
> Connector.prototype.sendQuery = function() {
> return true;
> };
>
>
> Record.prototype.preParse = function(e) {
> if (this.CONNECTION_ERROR != null || typeof this.RXMap == "undefined")
> { return false; }
>
> if (this.CONNECTION_METHOD == "DATABASE") {
>
> for (var field in this.RXMap) {
> this[field] = this.RXMap[field];
> }
> }
>
> return true;
> };
>
> Record.prototype.parse = function(e) {
>
> var detstring =
> this.RXMap.REQUEST_TM.replace(/(\d+)\/(\d+)\/(\d{4})\s(\S+)/g, '$1/$2/$3
> $4 GMT');
> var dt = new Date(detstring);
> e.ObserverEventTime(dt);
> return true;
> };
>
>
> Record.prototype.normalize = function(e) {
> instance.SEND_EVENT =true;
> return true;
> };
>
> Record.prototype.postParse = function(e) {
> return true;
> };
>
>
> Record.prototype.reply = function(e) {
> return true;
>
> ----------------------------------------------------------------------------
> my sqlquery.base is following:
>
> SELECT TOP 100 * FROM TS_QUERYBILLSIGNED_LOG WHERE REQUEST_TM > %s
>
>
> My table sample is following:
> ----------------------------------------------------------------------------------
>
> CUSTCODE,BEGIN_TM,END_TM,PAGEINDEX,QUERYTYPE,SYSTE MNAME,SIGNEDTYPE,CLIENTIP,CLIENTMAC,CLIENTNAME,MET HODNAME,REQUEST_TM,ANSWER_TM,ANSWER_TOTAL,ANSWER_C URRENTCOUNT,LOG_ID,WAYBILL_NOS
> 8710294837,12/30/2013,1/2/2014
> 23:59,0,0,CSS-CLIENT,0,221.213.26.241,6C-F0-49-CD-2C-CD,a0af75ce888346e,waybillSingedTotal,1/3/2014
> 14:50,1/3/2014 14:50,28,4,433676211,
>
> -----------------------------------------------------------------------------------------
> My table Schema is following:
>
> USE [sfere]
> GO
>
> SET ANSI_NULLS ON
> GO
> SET QUOTED_IDENTIFIER ON
> GO
> SET ANSI_PADDING ON
> GO
> CREATE TABLE [dbo].[ts_querybillsigned_log](
> [CUSTCODE] [varchar](20) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
> [BEGIN_TM] [datetime] NULL,
> [END_TM] [datetime] NULL,
> [PAGEINDEX] [varchar](20) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
> [QUERYTYPE] [varchar](20) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
> [SYSTEMNAME] [varchar](20) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
> [SIGNEDTYPE] [varchar](20) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
> [CLIENTIP] [varchar](200) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
> [CLIENTMAC] [varchar](200) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
> [CLIENTNAME] [varchar](500) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
> [METHODNAME] [varchar](20) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
> [REQUEST_TM] [datetime] NULL,
> [ANSWER_TM] [datetime] NULL,
> [ANSWER_TOTAL] [numeric](20, 0) NULL,
> [ANSWER_CURRENTCOUNT] [numeric](20, 0) NULL,
> [LOG_ID] [numeric](30, 0) NOT NULL,
> [WAYBILL_NOS] [varchar](400) COLLATE SQL_Latin1_General_CP1_CI_AS NULL
> ) ON [PRIMARY]
>
> GO
> SET ANSI_PADDING OFF
>
> Thanks
> Best Regards!
> Steve zeng
It's throwing an exception because at some point, you are not checking
your string for nulls before calling replace. My guess is that
this.RXMap.REQUEST_TM is sometimes empty/null and when you call replace,
it then excepts. Always ensure that your string value is
non-null/defined before calling a function against it.
brandon.langley
brandon.langley's Profile: https://forums.netiq.com/member.php?userid=350
View this thread: https://forums.netiq.com/showthread.php?t=50290

Cannot call Voicemail?

Similar Messages

Maybe you are looking for