Cannot cancel the release of a z segemt

Hi All,
I am getting the following error message while setting the status of IDOC segment as CANCEL RELEASE in WE31
Error while resetting release of segment Z1YV_CRRB_AUDIT
I need to add one more fields in the existing segment, but as there is error in CANCEL RELEASE of the segment i am unblae to do so.
Any help will be highly appreciated
Rgds
Kaushal

Hi,
generally first we create zsegments and then release them ten only we copy the basic type to zbasictype and then add the zsegment to it and then finally we release the basictype...This is what we do..as such in ur case it should allow u to modify the zsegment straight away when we cancel the release,but it was throwing error,so i thought to have a check at it if we relase basic type then release the segment ,may be it allows..thats why i suggested..
is it working or still u r facing some problem in it???let me know..
<REMOVED BY MODERATOR>
Regards,
Nagaraj
Message was edited by:
Alvaro Tejada Galindo

Similar Messages

Cancel the Release to Accounting but not the Billing Document

Hi Gurus,
Is there a way to Cancel the release to accounting billing document but it will not cancel the billing document. I can't cancel the billing documen because it is already used as a reference to one of our orders.
I hope you can help me...
Thanks a lot!
Mon Magallanes

Hi,
As per my understanding the accounting document in itself cannot be canceled. Because once the posting is done it will be reflected in the PL. If you cancel the billing document itself then the Accounting entries would be reversed.
Thanks,
Mukund

How to cancel the release of the current segment definition-WE31-IDOC?

Hi Experts,
Am trying to add a new field to a existing custom segment type/defination. This segment type is already using in the system.
So, went to WE31 and pressed the PENCIL button for changing/adding my new field, but am geting the below message,
(1)pls let me know that does it mean CANCEL the release (Menu>Edit>Cancel Release)? if so, Can I go ahead and use this CANCEL the release? do I need to take any pre-requisites as this segment is already relased?
(2)But, you know there is another option saying 'ADD VERSION-Shift+F5', if I choose this option, its also taking me to a screen where in I can add new fields so which is correct option for me is it either (1) or (2)?
Current segment definition Z_segment_defination can no longer be changed
Message no. EA666
Diagnosis
The current segment definition Z_segment_defination of segment type Zsegment_type is already released.
System Response
The segment definition cannot be changed.
Procedure
You can either add a new segment definition or cancel the release of the current segment definition.
Thank you

so i tried to CANCEL the release by goiong menu pathEdit-->Cancel the release, but am getting the below error, How to fix it to add my new field?
Error while resetting release of segment
Thank you

Cancel the Release for PO & PR

Hi
Once PR or PO released and follow on documents are processed then release can not be cancelled .
If PR is released and Po has created , the PR release can not be reversed .
Similarly If PO released and GR has taken for that PO then release can not be cancelled .
How can I achieve this ?
Actually system allows to cancell the release even after follow on documents are processed . I obseved it in our system . Our head of Dept Released one PO and GR was taken , but afterwards he cancelled that release
Similarly If there is two step release ( R1 and R2 ) and PO was release by both . After R2 released the PO then person R1 should not able to change the PO or Cancel his release
Is there any solution to restrict such situation ? Please provide complete solution
Please help
Edited by: Bhushan Bivalkar on Dec 15, 2009 4:25 PM
Edited by: Bhushan Bivalkar on Dec 15, 2009 4:26 PM

Hi,
you can set the release status as not changeble for release indicator " Changeability of Purchasing Document During/After Release " and set the release indicator in release strategies,
rgds

I cannot cancel the goods issue because the delivery has been archived

Dear Gurus,
I have cancelled the MB1C goods receipt but I cannot cancel the goods issue because the delivery has been archived. Is it possible for you to fix this batch record any other way ?
Early resposne would be appreciated !
Thanks,
Rafiq

Dear Friends,
Can u please help me out of this issue
Thanks,
Rafiq

Cancel the release and change the z segment in new version.

Hi,
I have a Z segment created in 4.6c.
Now we have upgraded to ECC and i want to change one of the field ( i.e data element of the field ) and I am not able to change it.
It gives me the hard error. I am unable to cancel the relase and do the modication.
If I try to add a version it doesnt accept it with out any additonal fields.
I have tried deleting the segemnt in Basic type and tried deleting the whole segemnt, but it doesn accept this way too.
Any ideas how to go about it?
Thanks,
Krishna.

Hello,
I had a similar problem when I tried to delete fields from a segment. I also wasn't able to cancel the release of the segment and the release of the extended idoc type.
The reason seems to be that the idoc extension and the segment have been set to "released" in a lower release version of the sap-system.
I was able to edit the segment when I changed the corresponding table entry in EDISDEF and set the release to the current one. However that is no solution I would like to propose.
Anyway the problem could have something to do with the release of the the sap-system. In this case I would be glad if someone could offer a solution which is more close to the standard than editing the system tables directly.

Error When canceling the released idoc ?

Hi All,
I am getting the following error when i try to cancel the releaseed idoc.
" There are already views referring to extension ZG_ORDERS05. The release can only be reset if no assignments between views and extensions exist. "
Can anyone tel me how to solve this error and add a new segment to the released idoc ?
Thanks.

hi,
i think you are using a view for this idoc.
1. Check: WE20 and open your receiverdetermination.
2. Open your Outbound parameter settings
3. check the view settings at the bottom of the first tab. Are you using a view ?
if yes... check transaction WE32 and remove the view.
maybe it´s useful!
Gordon

Cancel The Release startegy

Dear SAP Experts!
When I can going to the Me29n Release the PO
The System Says the PO cannot be released ,
How can I release the PO.
regards,
A S

plz check ur configuration of rel of po
if this is happening only with some pos then chedck the release parameters u have given in strategy and one u have given in po ,like pur grp ,plant , doc type etc
for configuration check following
http://www.sapstudymaterials.com/
here at right u will get release strategy config
http://www.sap123.com/showthread.php?t=59
regards
kunal

Cannot found the released extension in EEWB

Dear SAP Expert,
     I have problem with EEWB, I want to enhance extension for OPPORTUNITY HEADER. But I can not found the released extension. --> I think it have been DELETED.
I develop EEWB at client 039 (DEV) to add 4 fields in customer tab.
Client 039
     Project Name = ZEXTENSION_FIELD_FOR_OPP
     Project Description = create extension fields for opportunity
     Extension Name = ZEXTENSION_FIELD_FOR_OPP
     Extension Description = CREATE CUSTOMIZING FOR OPP
     Business Object = OPPORTUNITY
     Extension Type = CUSTOMER_H
After I develop , I transport to client QD and Production
Now. I want to add more new 2 fields , But I can not found old extension to modify..
What should I do?
How can I retrived the DELETED extension.
Best regards,
Siriporn T.

D,
Check this out:
EEWB Deleting a project and extension
Undo eewb enhancement (deleting the whole enhancement)
thanks,
ashish.

HT1766 A message popup tells me that my ipad has not backed up in two weeks. Now my ipad is locked and I cannot cancel the message, turn it off or slide to unlock. What do i do?

I have a pop up message on my IPad that says it has not backed up in two weeks and now my ipad is locked and I cannot use it. I connected it to electricity, it is already on Wifi, and locked it with the button on top. But the message has not gone away. I cannot turn it off or remove the message or or slide to unlock. What can I do?

Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

CANCEL PR release as per the sequence

Hi
We have two levels of release for PR, the first level is release and then the release goes to second level and the second level release takes place. This is working fine
But when the user cancels the release. The cancel release for both the levels taking place when the first level user is cancelling the release.
My user want the cancel release should also take in sequence that is the second level has to cancel the release and the first level.
Iam not finding any authorisation object for release cancel. i also trie dwith release indicator not changeable but not happening.
Kinldy let me know if any one have a solution for the same.
chris
Edited by: CHRIS MM on Jun 30, 2009 6:35 PM
Edited by: CHRIS MM on Jun 30, 2009 6:35 PM

Dear,
have you checked your assignment in release group-Release code -plant-Agent ID are assigned properly or not..
Check this in:
Spro-Materials Management-Purchasing-Purchase Requisition-Release Procedure-Procedure with Classification-Set Up Procedure with Classification-Workflow..
Here check , i think your all users are assigned for all tracking numbers here.
Also check your tracking number assignment in the release strategies, whether it is assigned properly or not.
reagrds
Utsav

Reverse the release the PO

HI GURUS,
PO has been released completely and Document has been outputted, but now I want to cancel the release of PO as few changes are to be made. But the system is not allowing to cancel release. And is displaying message that DOCUMENT HAS BEEN ALREADY BEEN OUTPUTTED(function not possible).

Hi,
Please refer SAP Note 493900
12. Question :
Is it possible to cancel a release strategy when the purchase order has been printed out?
Answer :
With ME29N you cannot cancel a release strategy once the document has been
printed out. This behaviour constitutes a new design.
Regarding ME28 it has been decided to keep the old behaviour and you can
cancel the release if there is no message (no NAST record) or at least one
message which has not been printed out.
Do let me know if it helped.
Thanks
Shailesh

Cancellation of Release of a purchase requisition

Hi,
Currently the system allow to cancel the Release of a purchase requisition eventhought the Purchase Order already created for it.
I could not locate the any system message that actually control this.
How to disallow the cancellation of Release of a purchase requisition if the processing status is 'PO Created'.
Best regards,

Dear Eric,
We cant do cancel of PR onece PO created.not only that onece release of PR we cant cancel the PR we can do only flag the release PR.
Hope this will helps you
Prem.

Cancel PO release

Hi
I have set the release procedure for PO. IN ME29N after releasing the PO i am unable to cancel the release Pls let me know how to cancel the release

Hi,
Check this link will help you.
http://help.sap.com/saphelp_erp60_sp/helpdata/en/4e/2be03b8b2a2b08e10000000a114084/content.htm
Regards,
PK

Cancel the booking for ILT courses

Hi All,
Currently if an employee is booked into the course/training thru ESS, which is scheduled on the same day of booking and then we are not able to cancel the booking thru ESS on the same day.
In portal there is message that says" You are booked for this course. You cannot cancel the booking since the course has already started or finished. " even though i have 2 schedules on the same day one in the morning and the other in noon so employees book for morning session and then they realise that they can't make it so when they try to cancel they get the above error message.
Pls let me know how can the ee cancel the course before the training starts and book the non session.
thanks in advance.

We just identified this issue as well. If you create a curriculum that consists of a WBT and then an ILT as sequenced, all dates appear. This is the sequence my client always uses and what we tested, so we were able to go live with the issue you described. However, we are logging an OSS message. I would recommend you log one too - the more the merrier
Good luck,
Sharon

Cannot cancel the release of a z segemt

Similar Messages

Maybe you are looking for