Cannot capture Hi8 run through digitizer
Bought FCE2 installed with Mac g5 a few years ago only to capture and copy to DVD old video - Hi8 and DV. It virtually never worked. Dozens of hours trying every conceivable combo of settings. When I hit NOW, it either 1] gave "General Error," froze, wouldn't close or force quit without restarting, or 2] appear to be capturing for 5 minutes 13 seconds (consistently), then freeze, yielding a file of 21.27 GB (when "Limit capture" was set to 100 minutes) that was labelled Quicktime Movie, but would not play.
But about once a year, it successfully captured an hour or so of DV tape or Hi8 tape run through a Sony TRV950 with "A/V>DV OUT" set to "ON." That is, I play the Hi8 tape in an analog camcorder running its output into the TRV950 set to digitize it. Output from 950 goes to computer. I got playable Quicktime movies from both Hi8 and DV tapes.
With resentment, because I paid for FCE2 to work, I bought the upgrade to FCE4. It is working reliably to capture DV tape (but not export it), but it will not capture the Hi8 run through the Sony digitizing feature. When I hit NOW, I get the large black rectangle and "Waiting for timecode." But never get past that. I am using the identical setup as with FCE2 during the very rare occasions on which it functioned normally. The Hi8 tapes have a timecode, the same type that occasionally worked with FCE2.
Any helpful insights from the experienced?
For capture scratch, I use a second internal HD - 750 GB with 32 MB cache. I have also tried a large external HD and the Mac's primary HD. Same result.
Thanks for your time.
TT
Great news TT.
1. With the new Setup setting, I have successfully captured a long Hi8.
An Easy Setup change only effects NEW Projects. DV Converter is the correct Easy Setup for use where a NON-Controllable device is being used.
2. On my newly installed second internal drive, I formatted as Extended (journalled). I do not know >the formatting of the main Mac internal drive.
Right/Option Click on your system drive icon on the Desktop and select Get Info from the menu.
What is the significance of these two items?
Anti-virus apps can think your incoming footage is nasty and tries to block it. iSight if active is competing for a chunk of incoming video.
Al
Similar Messages
-
I have an apple iphone 4 that I want to download audio books from my library onto. I cannot figure out how to do that. The iphone does not show up on my mac laptop as a connected device. Does this kind of download have to run through itunes? Thanks
Yes it is done through iTunes. The iPhone will never show up in Finder as a device. The following is general information on iTunes sync: http://support.apple.com/kb/HT1386 and the following is a previous discussion where the post by Andreas Junge helped others that had a problem syncing audiobooks: https://discussions.apple.com/message/20052732#20052732
-
I have a 2008 black MacBook and acess UK tv through a puchased proxy. I want to purchase a Sony Bravia internet connected tv and stream the site through a tv - Sony tell me this won't work - that a latest model tv cannot capture content and sites from a MacBook - is this true???? Surely there is a solution? Any help or advice welcome.
They are correct. The only stream you can wireless connect the TV to a Mac is through an AppleTV, and that's purchased content on iTunes, and your own homemade content that is H.264 MPEG-4 that is 1800kbps. Conversion of commercial video to that format is illegal, and hence how can not be stated on the forum. Alternatively, as long as the TV is HDMI, you can wired connect it to your MacBook using the same advice here:
https://discussions.apple.com/message/16531141#16531141 -
When you load Windows via Boot Camp Assistant program and run Windows does not recognize the "usb" outlets cannot identify the device through the Dvd or flash
Did you install BC drivers on the Windows side?
-
There is a black line running through the delete, reply, forward button at the top of the at&t email page. It does not allow me to select any option. The email works fine in Internet Explorer. Please help get my email options back.
It seems the same problem occurred once with Gmail. The suggested solution can be seen here although it didn't get any replies: [http://www.google.com/support/forum/p/gmail/thread?tid=2ac16aff0e50641a&hl=en System colors override]
-
A lot of problem for an error: Cannot start Managed Server through NM
Hi, all. Thank for coming here.
My main problem is cannot start Manager server through Node Manager. I've configured with the same way on my friend's network and It's works but It's wrong with mine.
my weblogic domain:
Machine 1: Administration Server + 1 Managed server
Machine 2: 1 Managed server
all of these servers communicate through SSL protocol. When I try to start Managed Server on remote machine:
output from console which was invoked startWebLogic.sh
+<Sep 9, 2010 12:09:53 PM> <INFO> <devdomain> <MS01> <Server failed during startup so will not be restarted>+
Sep 9, 2010 12:09:53 PM weblogic.nodemanager.server.ServerManager log
INFO: Server failed during startup so will not be restarted
+<Sep 9, 2010 12:09:53 PM> <WARNING> <Exception while starting server 'MS01'>+
java.io.IOException: Server failed to start up. See server output log for more details.
at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:331)
at weblogic.nodemanager.server.Handler.handleStart(Handler.java:541)
at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:118)
at weblogic.nodemanager.server.Handler.run(Handler.java:70)
at java.lang.Thread.run(Thread.java:619)
Sep 9, 2010 12:09:53 PM weblogic.nodemanager.server.Handler handleStart
WARNING: Exception while starting server 'MS01'
java.io.IOException: Server failed to start up. See server output log for more details.
at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:331)
at weblogic.nodemanager.server.Handler.handleStart(Handler.java:541)
at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:118)
at weblogic.nodemanager.server.Handler.run(Handler.java:70)
at java.lang.Thread.run(Thread.java:619)
And this is MS01 log:
starting weblogic with Java version:
ERROR: transport error 202: bind failed: Address already in use
ERROR: JDWP Transport dt_socket failed to initialize, TRANSPORT_INIT(510)
+JDWP exit error AGENT_ERROR_TRANSPORT_INIT(197): No transports initialized [../../../src/share/back/debugInit.c:690]+
The application has requested the JVM to exit with an fatal error from JNI. Error message:
JDWP No transports initialized, jvmtiError=AGENT_ERROR_TRANSPORT_INIT(197)
Starting WLS with line:
+/opt/Oracle/Middleware/jrockit_160_14_R27.6.5-32/bin/java -jrockit -Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket,address=8453,server=y,suspend=n -Djava.compiler=NONE -Xms512m -Xmx512m -Dweblogic.Name=MS01 -Djava.security.policy=/opt/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.policy -Dweblogic.system.BootIdentityFile=/opt/Oracle/Middleware/user_projects/domains/devdomain/servers/MS01/data/nodemanager/boot.properties -Dweblogic.nodemanager.ServiceEnabled=true -Dweblogic.security.SSL.ignoreHostnameVerification=true -Dweblogic.ReverseDNSAllowed=false -Xrs -Xverify:none -ea -da:com.bea... -da:javelin... -da:weblogic... -ea:com.bea.wli... -ea:com.bea.broker... -ea:com.bea.sbconsole... -Dplatform.home=/opt/Oracle/Middleware/wlserver_10.3 -Dwls.home=/opt/Oracle/Middleware/wlserver_10.3/server -Dweblogic.home=/opt/Oracle/Middleware/wlserver_10.3/server -Dweblogic.wsee.bind.suppressDeployErrorMessage=true -Dweblogic.wsee.skip.async.response=true -Dweblogic.management.discover=false -Dweblogic.management.server=http://192.168.1.35:7001 -Dwlw.iterativeDev=true -Dwlw.testConsole=true -Dwlw.logErrorsToConsole=true -Dweblogic.ext.dirs=/opt/Oracle/Middleware/patch_wls1032/profiles/default/sysext_manifest_classpath:/opt/Oracle/Middleware/patch_wlp1032/profiles/default/sysext_manifest_classpath:/opt/Oracle/Middleware/wlportal_10.3/p13n/lib/system:/opt/Oracle/Middleware/wlportal_10.3/light-portal/lib/system:/opt/Oracle/Middleware/wlportal_10.3/portal/lib/system:/opt/Oracle/Middleware/wlportal_10.3/info-mgmt/lib/system:/opt/Oracle/Middleware/wlportal_10.3/analytics/lib/system:/opt/Oracle/Middleware/wlportal_10.3/apps/lib/system:/opt/Oracle/Middleware/wlportal_10.3/info-mgmt/deprecated/lib/system:/opt/Oracle/Middleware/wlportal_10.3/content-mgmt/lib/system -Dweblogic.alternateTypesDirectory=/opt/Oracle/Middleware/wlportal_10.3/portal/lib/security weblogic.Server+
ERROR: transport error 202: bind failed: Address already in use
ERROR: JDWP Transport dt_socket failed to initialize, TRANSPORT_INIT(510)
+JDWP exit error AGENT_ERROR_TRANSPORT_INIT(197): No transports initialized [../../../src/share/back/debugInit.c:690]+
The application has requested the JVM to exit with an fatal error from JNI. Error message:
JDWP No transports initialized, jvmtiError=AGENT_ERROR_TRANSPORT_INIT(197)
Stopping PointBase server...
PointBase server stopped.
And this is output from console which node manager runs on:
+<Sep 9, 2010 12:09:53 PM> <INFO> <devdomain> <MS01> <Server failed during startup so will not be restarted>+
Sep 9, 2010 12:09:53 PM weblogic.nodemanager.server.ServerManager log
INFO: Server failed during startup so will not be restarted
+<Sep 9, 2010 12:09:53 PM> <WARNING> <Exception while starting server 'MS01'>+
java.io.IOException: Server failed to start up. See server output log for more details.
at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:331)
at weblogic.nodemanager.server.Handler.handleStart(Handler.java:541)
at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:118)
at weblogic.nodemanager.server.Handler.run(Handler.java:70)
at java.lang.Thread.run(Thread.java:619)
Sep 9, 2010 12:09:53 PM weblogic.nodemanager.server.Handler handleStart
WARNING: Exception while starting server 'MS01'
java.io.IOException: Server failed to start up. See server output log for more details.
at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:331)
at weblogic.nodemanager.server.Handler.handleStart(Handler.java:541)
at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:118)
at weblogic.nodemanager.server.Handler.run(Handler.java:70)
at java.lang.Thread.run(Thread.java:619)
I tried to start Managed server some times again, but I face up to strange issue, this is output from console which Admin Server runs on (these exception messages throws continuously):
+<Sep 9, 2010 12:42:53 PM EDT> <Warning> <JDBC> <BEA-001129> <Received exception while creating connection for pool "portalDataSourceNeverXA": SQL-server rejected establishment of SQL-connection. Pointbase Server may not be running on localhost at port 9093.>+
+<Sep 9, 2010 12:42:57 PM EDT> <Warning> <JDBC> <BEA-001129> <Received exception while creating connection for pool "cgDataSource": SQL-server rejected establishment of SQL-connection. Pointbase Server may not be running on localhost at port 9093.>+
+<Sep 9, 2010 12:42:58 PM EDT> <Warning> <JDBC> <BEA-001129> <Received exception while creating connection for pool "cgDataSource-nonXA": SQL-server rejected establishment of SQL-connection. Pointbase Server may not be running on localhost at port 9093.>+
+<Sep 9, 2010 12:42:58 PM EDT> <Warning> <JDBC> <BEA-001129> <Received exception while creating connection for pool "p13nDataSource": SQL-server rejected establishment of SQL-connection. Pointbase Server may not be running on localhost at port 9093.>+
+<Sep 9, 2010 12:42:58 PM EDT> <Warning> <JDBC> <BEA-001129> <Received exception while creating connection for pool "portalDataSource": SQL-server rejected establishment of SQL-connection. Pointbase Server may not be running on localhost at port 9093.>+
+<Sep 9, 2010 12:42:58 PM EDT> <Warning> <JDBC> <BEA-001129> <Received exception while creating connection for pool "portalDataSourceAlwaysXA": SQL-server rejected establishment of SQL-connection. Pointbase Server may not be running on localhost at port 9093.>+
I can ensure that all of these connection pool has configured to run on 9093 port already. Then I view the DOMAIN_NAME/pointbase.log, it said:
Unable to start the server. start server error: java.net.BindException: Address already in use
I cannot understand what's run on pointbase address ?
All of these error make me angry, because I've configured with the same way on other system and It's work. I've spent all of week to fix these bug, but I'm having nothing :((
Please help me.Thank Jay SenSharma.
I've looked for these JAVA_OPTION values you said, but I cant found them. That value is content of JAVA_DEBUG option, not JAVA_OPTION. In my situation, JAVA_DEBUG=" " (it's not set by default).
Please re-view my error log:
Node Manager output:
+<Sep 9, 2010 11:32:44 PM> <WARNING> <Exception while starting server 'MS01'>+
java.io.IOException: Server failed to start up. See server output log for more details.
at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:331)
at weblogic.nodemanager.server.Handler.handleStart(Handler.java:541)
at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:118)
at weblogic.nodemanager.server.Handler.run(Handler.java:70)
at java.lang.Thread.run(Thread.java:619)
Sep 9, 2010 11:32:44 PM weblogic.nodemanager.server.Handler handleStart
WARNING: Exception while starting server 'MS01'
java.io.IOException: Server failed to start up. See server output log for more details.
at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:331)
at weblogic.nodemanager.server.Handler.handleStart(Handler.java:541)
at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:118)
at weblogic.nodemanager.server.Handler.run(Handler.java:70)
at java.lang.Thread.run(Thread.java:619)
Managed server MS01's log:
+<Sep 9, 2010 11:45:05 PM> <INFO> <NodeManager> <Server output log file is '/opt/Oracle/Middleware/user_projects/domains/devdomain/servers/MS01/logs/MS01.out'>+
+<Sep 9, 2010 11:45:07 PM EDT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with BEA JRockit(R) Version R27.6.5-32_o-121899-1.6.0_14-20091001-2113-linux-ia32 from BEA Systems, Inc.>+
+<Sep 9, 2010 11:45:09 PM EDT> <Info> <Management> <BEA-141107> <Version: WebLogic Server Temporary Patch for 9216172 Tue Jan 12 02:07:27 PST 2010+
WebLogic Server 10.3.2.0 Tue Oct 20 12:16:15 PDT 2009 1267925 >
+<Sep 9, 2010 11:45:13 PM EDT> <Error> <Management> <BEA-141244> <Schema validation errors while parsing /opt/Oracle/Middleware/user_projects/domains/devdomain/config/config.xml - Invalid xsi:type qname: 'wsrp:wsrp-identity-asserterType' in element realm@http://xmlns.oracle.com/weblogic/domain>+
+<Sep 9, 2010 11:45:13 PM EDT> <Error> <Management> <BEA-141244> <Schema validation errors while parsing /opt/Oracle/Middleware/user_projects/domains/devdomain/config/config.xml - /opt/Oracle/Middleware/user_projects/domains/devdomain/<unknown>:11:9: error: failed to load java type corresponding to t=wsrp-identity-asserterType@http://www.bea.com/ns/wlp/90/security/wsrp>+
+<Sep 9, 2010 11:45:14 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>+
+<Sep 9, 2010 11:45:14 PM EDT> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>+
+<Sep 9, 2010 11:45:14 PM EDT> <Notice> <LoggingService> <BEA-320400> <The log file /opt/Oracle/Middleware/user_projects/domains/devdomain/servers/MS01/logs/MS01.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>+
+<Sep 9, 2010 11:45:14 PM EDT> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to /opt/Oracle/Middleware/user_projects/domains/devdomain/servers/MS01/logs/MS01.log00002. Log messages will continue to be logged in /opt/Oracle/Middleware/user_projects/domains/devdomain/servers/MS01/logs/MS01.log.>+
+<Sep 9, 2010 11:45:14 PM EDT> <Notice> <Log Management> <BEA-170019> <The server log file /opt/Oracle/Middleware/user_projects/domains/devdomain/servers/MS01/logs/MS01.log is opened. All server side log events will be written to this file.>+
+<Sep 9, 2010 11:45:17 PM EDT> <Error> <Security> <BEA-090870> <The realm "myrealm" failed to be loaded: weblogic.security.service.SecurityServiceException: com.bea.common.engine.ServiceInitializationException: <openjpa-1.1.1-SNAPSHOT-r422266:807362 fatal internal error> org.apache.openjpa.util.InternalException: There was an error when invoking the static getInstance method on the named factory class "kodo.jdbc.kernel.KodoJDBCBrokerFactory". See the nested exception for details..+
weblogic.security.service.SecurityServiceException: com.bea.common.engine.ServiceInitializationException: <openjpa-1.1.1-SNAPSHOT-r422266:807362 fatal internal error> org.apache.openjpa.util.InternalException: There was an error when invoking the static getInstance method on the named factory class "kodo.jdbc.kernel.KodoJDBCBrokerFactory". See the nested exception for details.
+ at weblogic.security.service.CSSWLSDelegateImpl.initializeServiceEngine(CSSWLSDelegateImpl.java:342)+
+ at weblogic.security.service.CSSWLSDelegateImpl.initialize(CSSWLSDelegateImpl.java:221)+
+ at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.InitializeServiceEngine(CommonSecurityServiceManagerDelegateImpl.java:1783)+
+ at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealm(CommonSecurityServiceManagerDelegateImpl.java:442)+
+ at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadRealm(CommonSecurityServiceManagerDelegateImpl.java:840)+
+ Truncated. see log file for complete stacktrace+
Caused By: com.bea.common.engine.ServiceInitializationException: <openjpa-1.1.1-SNAPSHOT-r422266:807362 fatal internal error> org.apache.openjpa.util.InternalException: There was an error when invoking the static getInstance method on the named factory class "kodo.jdbc.kernel.KodoJDBCBrokerFactory". See the nested exception for details.
+ at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:365)+
+ at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:315)+
+ at com.bea.common.engine.internal.ServiceEngineImpl.lookupService(ServiceEngineImpl.java:257)+
+ at com.bea.common.engine.internal.ServicesImpl.getService(ServicesImpl.java:72)+
+ at weblogic.security.service.internal.WLSIdentityServiceImpl.initialize(WLSIdentityServiceImpl.java:47)+
+ Truncated. see log file for complete stacktrace+
Caused By: <openjpa-1.1.1-SNAPSHOT-r422266:807362 fatal internal error> org.apache.openjpa.util.InternalException: There was an error when invoking the static getInstance method on the named factory class "kodo.jdbc.kernel.KodoJDBCBrokerFactory". See the nested exception for details.
+ at org.apache.openjpa.kernel.Bootstrap.getBrokerFactory(Bootstrap.java:95)+
+ at com.bea.common.security.storeservice.util.StoreServiceDelegate$StoreSerivceHelper.getPersistenceManagerFactory(StoreServiceDelegate.java:347)+
+ at com.bea.common.security.storeservice.util.StoreServiceDelegate.initJDO(StoreServiceDelegate.java:145)+
+ at com.bea.common.security.storeservice.util.StoreServiceDelegate.<init>(StoreServiceDelegate.java:98)+
+ at com.bea.common.security.internal.service.StoreServiceImpl.init(StoreServiceImpl.java:76)+
+ Truncated. see log file for complete stacktrace+
Caused By: java.lang.RuntimeException: There were errors initializing your configuration: <openjpa-1.1.1-SNAPSHOT-r422266:807362 fatal store error> org.apache.openjpa.util.StoreException: com.pointbase.jdbc.jdbcUniversalDriver
+ at org.apache.openjpa.jdbc.schema.DataSourceFactory.newDataSource(DataSourceFactory.java:123)+
+ at org.apache.openjpa.jdbc.conf.JDBCConfigurationImpl.createConnectionFactory(JDBCConfigurationImpl.java:776)+
+ at org.apache.openjpa.jdbc.conf.JDBCConfigurationImpl.getConnectionFactory(JDBCConfigurationImpl.java:683)+
+ at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)+
+ at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)+
+ at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)+
+ at java.lang.reflect.Method.invoke(Method.java:597)+
+ at org.apache.openjpa.lib.conf.ConfigurationImpl.instantiateAll(ConfigurationImpl.java:288)+
+ at org.apache.openjpa.conf.OpenJPAConfigurationImpl.instantiateAll(OpenJPAConfigurationImpl.java:1409)+
+ at org.apache.openjpa.kernel.AbstractBrokerFactory.makeReadOnly(AbstractBrokerFactory.java:646)+
+ at org.apache.openjpa.kernel.AbstractBrokerFactory.pool(AbstractBrokerFactory.java:131)+
+ at kodo.jdbc.kernel.KodoJDBCBrokerFactory.getInstance(KodoJDBCBrokerFactory.java:43)+
+ at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)+
+ at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)+
+ at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)+
+ at java.lang.reflect.Method.invoke(Method.java:597)+
+ at org.apache.openjpa.kernel.Bootstrap.invokeFactory(Bootstrap.java:124)+
+ at org.apache.openjpa.kernel.Bootstrap.getBrokerFactory(Bootstrap.java:90)+
+ at com.bea.common.security.storeservice.util.StoreServiceDelegate$StoreSerivceHelper.getPersistenceManagerFactory(StoreServiceDelegate.java:347)+
+ at com.bea.common.security.storeservice.util.StoreServiceDelegate.initJDO(StoreServiceDelegate.java:145)+
+ at com.bea.common.security.storeservice.util.StoreServiceDelegate.<init>(StoreServiceDelegate.java:98)+
+ at com.bea.common.security.internal.service.StoreServiceImpl.init(StoreServiceImpl.java:76)+
+ at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:363)+
+ at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:315)+
+ at com.bea.common.engine.internal.ServiceEngineImpl.lookupService(ServiceEngineImpl.java:257)+
+ at com.bea.common.engine.internal.ServicesImpl.getService(ServicesImpl.java:72)+
+ at weblogic.security.service.internal.WLSIdentityServiceImpl.initialize(WLSIdentityServiceImpl.java:47)+
+ at weblogic.security.service.CSSWLSDelegateImpl.initializeServiceEngine(CSSWLSDelegateImpl.java:300)+
+ at weblogic.security.service.CSSWLSDelegateImpl.initialize(CSSWLSDelegateImpl.java:221)+
+ at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.InitializeServiceEngine(CommonSecurityServiceManagerDelegateImpl.java:1783)+
+ at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealm(CommonSecurityServiceManagerDelegateImpl.java:442)+
+ at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadRealm(CommonSecurityServiceManagerDelegateImpl.java:840)+
+ at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealms(CommonSecurityServiceManagerDelegateImpl.java:869)+
+ at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1028)+
+ at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)+
+ at weblogic.security.SecurityService.start(SecurityService.java:141)+
+ at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)+
+ at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)+
+ at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)+
Caused by: java.lang.ClassNotFoundException: com.pointbase.jdbc.jdbcUniversalDriver
+ at java.lang.Class.forName0(Native Method)+
+ at java.lang.Class.forName(Class.java:169)+
+ at org.apache.openjpa.jdbc.schema.DataSourceFactory.newDataSource(DataSourceFactory.java:85)+
+ ... 38 more+
+ at org.apache.openjpa.lib.conf.ConfigurationImpl.instantiateAll(ConfigurationImpl.java:302)+
+ at org.apache.openjpa.conf.OpenJPAConfigurationImpl.instantiateAll(OpenJPAConfigurationImpl.java:1409)+
+ at org.apache.openjpa.kernel.AbstractBrokerFactory.makeReadOnly(AbstractBrokerFactory.java:646)+
+ at org.apache.openjpa.kernel.AbstractBrokerFactory.pool(AbstractBrokerFactory.java:131)+
+ at kodo.jdbc.kernel.KodoJDBCBrokerFactory.getInstance(KodoJDBCBrokerFactory.java:43)+
+ Truncated. see log file for complete stacktrace+
+>+
+<Sep 9, 2010 11:45:17 PM EDT> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>+
+<Sep 9, 2010 11:45:17 PM EDT> <Critical> <WebLogicServer> <BEA-000362> <Server failed. Reason:+
There are 1 nested errors:
+weblogic.security.service.SecurityServiceRuntimeException: [Security:090399]Security Services Unavailable+
+ at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:916)+
+ at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1050)+
+ at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)+
+ at weblogic.security.SecurityService.start(SecurityService.java:141)+
+ at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)+
+ at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)+
+ at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)+
+>+
+<Sep 9, 2010 11:45:17 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>+
+<Sep 9, 2010 11:45:17 PM EDT> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>+
+<Sep 9, 2010 11:45:17 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>+
+<Sep 9, 2010 11:45:17 PM> <FINEST> <NodeManager> <Waiting for the process to die: 16443>+
+<Sep 9, 2010 11:45:17 PM> <INFO> <NodeManager> <Server failed during startup so will not be restarted>+
+<Sep 9, 2010 11:45:18 PM> <FINEST> <NodeManager> <runMonitor returned, setting finished=true and notifying waiters>+
ps:
I've come your weblog and found alot of tips for debugging WebLogic Server exceptions. It's really helpful. Thanks.
Edited by: Doubt_Man on Sep 10, 2010 10:49 AM
Edited by: Doubt_Man on Sep 10, 2010 3:54 PM -
Data Collection - values remained filled in from previous run through route
Hello,
We have an SFC that is running through a route the second time that requires specific Data Collection to be captured, but when Data Collection is attempted the values are all pre-filled in (and grayed out) from the previous run through the route.
The Data Collection needs to be entered in each time it is run through this route, especially if it is an RMA no matter how many times.
Am I missing a setting somewhere?
Thanks for your help,
MikeHello Sergiy,
The product goes through a normal route and is completed, SFC status = DONE.
The Product comes back and goes through an RMA route. First Operation data needs to be collected so it is entered by the Operator. The Product continues on and is completed, SFC status = DONE.
The Product comes back a second time and goes through the same RMA route. First Operation data needs to be collected, but it is already filled in with the data from the first time it went through the RMA route.
I was just wondering if I missed a configuration part or if this is a bug?
As always thanks,
Mike -
Cannot capture in Adobe Premiere CS5 via Canopus 110
I captured some video from an old tape deck with an RCA cable to the Canopus 110 yesterday, but today I cannot capture video from the DVD player. I disconnected the RCA connection from from the Canopus, connected the S-Video cable from the DVD player and now the record button on the capture window stays dimmed.
I've updated drivers on IEEE 1394 connection.
I've connected the Canopus to other IEEE connections ports.
I've checked and swapped ALL cables three times each.
Connected a Canopus 55 to each port.
Tried changing user to administator and went through the other 14 or so list of things to try.
And, I think I've restarted my computer 14 times thoughout all of this.
Now
at
wits
end...DVD players often add a copy protection flag to the video output - even if it's your very own DVD-R that you made. Not fair, I know, but that could be the issue. To test, simply connect the VHS deck again. Does it work? Yes? Then connect DVD, quits working, there's the issue.
Actually, you don't need to "capture" from DVD. One option is to simply copy the ".vob" files from the disc to your hard drive, then you can import them right into Premiere and edit them! Not sure when that feature was added, definitely works in my CS6. Try it.
Another option is to use software to convert the DVD into video clips which can also then be edited in Premiere. For instance, MPEG Streamclip which is free, can convert DVD to QuickTime .mov for editing. Might need to experiment with the settings, haven't used it in a few years myself. There are many other softwares, paid and free, to do similar.
Thanks
Jeff Pulera
Safe Harbor Computers -
Ugh tI have gray thumbnails of my photos. I cannot find my photos through the finder. what do I do?
I have gray thumbnails of my photos. I cannot find my photos through the finder. what do I do?
I have gray thumbnails of my photos. I cannot find my photos through the finder.
Gray thumbnils:
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the options to rebuild the thumbnails. It may take three or four goes to work.
Finding the Photos through the Finder.
It's not supported. Accessing the files via the Finder can lead to a corrupted Library.
There are many, many ways to access your files in iPhoto: You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Command-Click for selecting multiple pics.
(Note the above illustration is not a Finder Window. It's the dialogue you get when you go File -> Open)
You can access the Library from the New Message Window in Mail:
There's a similar option in Outlook and many, many other apps. If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
If you want to access the files with iPhoto not running:
For users of 10.6 and later: You can download a free Services component from MacOSXAutomation which will give you access to the iPhoto Library from your Services Menu.
Using the Services Preference Pane you can even create a keyboard shortcut for it.
For Users of 10.4 and 10.5 Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
Other options include:
Drag and Drop: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
File -> Export: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
Show File: a. On iPhoto 09 and earlier: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected. 3.b.
b: On iPhoto 11 and later: Select one of the affected photos in the iPhoto Window and go File -> Reveal in Finder -> Original. A Finder window will pop open with the file already selected. -
How can I get ipconfig /setclassid running through a logon script on Vista.
I have written a number of logon scripts to execute variations of this command at logon but it seems that it will not run for some users and they see a message
"The requested operation requires elevation"
Is there a way I can call this command at logon through this script?
Obviously I cannot use the runas command as I would then need to give the users the password to enter midway through the script.In case you are reading this, std users need rights to change network settings. If the script is being run as the user, as in this case, you need to add the user to the network configuration group, locally to where they will log on. If this is a change on all pcs then create a group and if this is a domain change consider a group policy.Vince
-
CS4 I cannot capture in HDV only DV works
I am really new in this field so excuse my incompetence, but I really need help. I have recorded footage in HDV 1080I but i cannot capture it. I can run my device (my camera) from the capture window (play, <<, pause, etc.) but not capture. Only when I change settings into dv format, I can capture the material in DV. I use an ilink, windows Vista and premiere pro CS4. Anyone can help me analyze the problem. The camera is a new Sony z1
You are not using a trial version of Premiere are you? If you are, the trial does not have any HDV or HD features, as Adobe buy these from a third party.
-
Cannot Capture Audio via AJA IoHD
I suddenly cannot capture audio via my AJA IoHD. I am using a JVC ProHD deck which connects through SDI to the IoHD and then into the Mac via FW800.
The system audio is routed to the IoHD. FCP AJA IoHD 720p 59.94 Apple ProRes 422 (HQ) easy setup is selected. Capture Clip Settings are set to capture 8 channels of audio, 48Khz 24 Bit.
I've got to be missing something. Previously captured clips have audio and playback no problem. I can see it in the meters.
Now when capturing I can hear the audio but nothing registers on the meters and once captured there is no audio on the clip.
I cannot think of what I am missing. I've been racking my brain and pounding my fists for hours. (That hasn't worked either)
Any ideas?Yes... forgot to mention that the audio box is checked in the log clip settings pane. It behaves as if it isn't though.
I just called Apple support and they were decidedly unhelpful. -
Anyone ever use a Canon XH A1 with FCP 5.1.4? I cannot capture at present.
I tried to start a new project with different setting for SD, and all the settings I originally had for my HD project changed, now I cannot capture anymore. It took me a while to configure all the settings for HD with the 2:3:3:3 pulldown, but now I'm just plain confused. Anyone know a solution?
I shot in HD in the 24F mode on a Canon XH A1. I've been capturing fine, but now the camera is not recognized ever since I created a new project with different settings.I created those project settings thinking they would only apply to that project (an SD one), and now I cannot figure out the steps to get back to where I was. This is what I wrote down to for my "In System Settings" that worked:
Video Quality: Dynamic
Frame Rate: Full
Pulldown Pattern: 2:3:3:2
Frame Offset: 4
Record (Full Quality).
Easy Setup - HDV-1080i60
Then I set my compressor for HDV 1080p24.
Now this simply doesn't work and I cannot capture.
Is there a way to revert back to my old settings before I created a different project?
Very confused why I cannot recognize my camera. -
When MRP run through background process in MDBT open PR and PO not comming?
Hi,
When MRP run through backgroung process in MDBT open PR and PO not coming in MDBT result.
Pls advise accordingaly.
Regards
rkRam,
Either I am totally misunderstanding your statements, or your business people are misinformed.
The output of MD01 (MRP total run in foreground) and the output of MDBT (MRP total Run in Background) ARE IDENTICAL, provided you have selected the same parameters.
Neither output contains a discrete listing of open Purchase orders and Purchase requisitions.
Standard output of both MD01 and MDBT are:
1. List of materials processed, with exception messages
2. Statistics
In addition, both of these programs also write MRP records to the MRP databases, provided that the "Display Material List" parameter is set. In this case, both of these programs will produce data that can be further reviewed and managed in MD05 and MD06. MD06 is the tool that most planners use to process the MRP database info.
If you wish to see a listing of the entire MRP results (either MD01 or MDBT), then execute transaction MDLD. This will produce either a spoolfile or a printed document.
For the PO or PR listings, review my earlier suggestions.
Rgds,
DB49 -
Insert statement not working when Interface is run through PI ..
Hi Every one,
There is an interface(Server proxy) which updates a ztable in the program. Updates are happening when we are running this interface manually(putting Payload manually) but in case there are already entries in ztable and we are trying to update these records, even after handling exception z table is not getting updated when run through PI and happening manually.
Please suggest me for the same.
VivekTobias from this forum had the answer!
http://powershell.com/cs/forums/p/5438/8786.aspx#8786
His fix:
Whenyou putput text from powershell, the console width is assumed. Since task scheduler runs its own hidden console, the width of that console is used to truncate the text.
You can work by this issue by setting the width yourself. Try using a combination of Format-Table -auto / Format-List -auto and Out-File -width like this:
get-process | Format-Table -Auto | Out-File c:\test.txt -Width 10000
The format-cmdlet with -Auto makes sure the file uses only as much width as is truly needed. The -Width parameter sets the maximum width available.
If you must redirect the output to something else, replace Out-File with Out-String -Stream -Width 10000 and then redirect the result to whereever you want.
Note that multiline strings will still be truncated after the first line.
My code looks like this:
#Export Dataset Table to a text file
$DataSet.Tables[0] | Format-Table -Auto | Out-File $rcvrFileName -Width 10000
This worked like a charm.
Thanks!
Maybe you are looking for
-
When i try to download a app it says invailid address
can not download apps
-
I ask this question a few hours ago, but being new to these forums, I put it in an improper location, unaware of this topic's existence. I apologize. Here is my issue: I have a Mac Pro, and I just recently acquire a Mac Book. I have two separate emai
-
Hello everybody, when we scroll down in the internet explorer so that parts of an applett are out of the screen and scroll up again, some parts of an applet is black. This is the part which was outside of the screen. You can see this here: [http://im
-
How can we close the TCP connection in Extend Clients (C#)
I tried to use a C# client to connect to server side Coherence Nodes. The problem is that, Coherence creates two new TCP connections every time I create a new cache, and it never closes the connection. In the end, Coherence keeps opening hundreds con
-
How do i change hard drive access from read only to read and write.
I bought a used Macbook late 2008, core 2 duo, 2,4 ghz. The start up hard drive will let me install programs but I can not move data on to the hard drive. Permissions are set to "Read Only". How can I change it to "Read and Write"?