Cannot change clip timecode to source timecode in viewer

I recently captured 5 clips using log & capture in FCP5, for all the clips with the exception of 1, I can see the TC in the viewer as well as in the browser's media start/end, but for this one clip, in the browser, the media start is 00:00:00:00 and the media end is the same as the duration. I am positive that I captured all 5 clips exactly the same. Can anyone help? Thanks.

Is the timecode on the bad clips counting up from 00.00.00.00 or does it really stay at 00.00.00.00? We have had a similar thing happen on a current project. Capturing DVCam via firewire to networked fiber channel storage. Random clips would have 00.00.00.00 code. you could capture the same clips from the same place on the tape and it would happen every time to those clips. The problem was traced to the network storage device in combination with one certain edit system as the problem couldn't be replicated on any other systems. The support person was contacted and stumped! We think it's an OS issue as this machine behaves strangely with the storage. This isn't really an answer but if you are on network storage I would try to replicate on other machines and/or try to capture the same media to an internal drive and see if it happens then.
Troubleshoot and narrow down what it could be.

Similar Messages

  • Why I cannot change the generated data source?

    Hello all,
    I have a generated data source from ODS, now I need to change something on it but the system only allow me to display it even I clicked the pen-glasses icon. Could anybody tell me how?
    Thanks
    Ryan

    Hi Ryan,
    You can't the generated data source from an ODS object, this is becasue ODS supplies delta from change log tables and the export data source / info-source structure should be same as of the change log table.
    However you can change the generated data source-info source assignment of info-cube.
    Hope it helps
    Thanks,
    Soumya
    Message was edited by:
            Soumya Mishra

  • I cannot change clip speed

    I am trying to change the speed on clips in a project where the same operation just the other day was possible. Now, even after restarting the computer, and final cut express several times, I keep getting a message where:
    "A conflict occured during a trim operation"
    and the speed of the clips, no matter when i imported them, cannot be changed due to this error. Can anyone explain to me how this can be fixed and what it exactly means? Im working on an important project and need to figure this out soon before its too late
    Thank you!

    Hi(Bonjour)
    It seems that you want to change the speed of a clip surounded by other clips.
    Try to put your clip at the end of your sequence, change the speed and put it back (with required trimming as you changed the duration...) at his place in the sequence.
    Michel Boissonneault

  • Can no longer access iPhoto from the iMovie camera browser..not working. Also the Inspector tool not working properly. Cannot change clip duration.

    How can I fix the INSPECTOR Tool?   Clip duration is not working properly, it is very erratic.  You type a number and a different one comes up on the clip.
    Suddenly the iPhoto Camera browser in iMovie is not working properly either.  Can not access my iPhotos to include them in iMovie project.

    Have you tried this?
    From the "HOME" screen, go to "SETTINGS > PRIVACY > PHOTOS" and see if iMovie is listed in the "PHOTOS" page. If it is, then tap the iMovie switch to "ON"
    Now your Videos & Photos should be accessible in the iMovie App.

  • Can't change clip duration Motion 5

    I have tried all of the work arounds I have been able to find in the Support Commnity and still I can't change the duration of source clips in Motion 5.  I have trashed plist, rebooted, repaired permisions, changed timing of project, changed name of clip, used the Timeline clock instead of the Instpector window.  Cleared all In / Out points and reset them to slightly different values. I have changed Timing to Variable and back again.  I can open clips in a new project and change duration.  I have opened new project and copied some layers from working project, the problem persists.  Is reinstall the option left available to me?

    BenB,
    The specifics: Motion 5.0.4 Timeline is set to 6 minutes, the Media is 5:59;21 (QT,mp4, H264,1280x720, 24fps). Imported via File Browser into Layer Group (Group In / Out points are 0 and 6 mins, as is Play Range).  At one time the clip was in it's full duration.  Afterr a crash / restart it is only 01:52;27.  I can not Drag the clip to its full length. I cannot change it's duration thru the Inspector, not the Timeline Clock. 
    In an effort to isolate the issue I opened a new Project (same time setttings as original Project, imported the clip, which plays to it's full duration, and then, one at a time, copied and pasted all Filters and Parameters and Objects from the original Project; all play fine.  Then I copied the original Layer Group in it's entirety to the Test Project, and the clip is still limited to 01:52;27.  I then used Replace Media to select a random clips (same format) with varying Duration (all longer than 01:52;27) and got the same result every time; Duraton 01:52;27. Not one element of the Test Project has an In / Out set to anything other than the full Duration of the Project.

  • Changing clip name behavior for duplicate clips

    Suppose I have one duplicate clip that I have copied into two bins, like so:
    -- Sunday's clips bin
              - clip_name_one
    and
    -- Flowers bin
              - clip_name_one
    If I change the name of one, I expect it to change the name of the other also, since it is the same clip, just placed in two different places (not two separate files).  Instead it only changes in one place, like so:
    -- Sunday's clips bin
              - clip_name_one
    and
    -- Flowers bin
              - clip_name_one_tulip
    Is this intentional behavior? I can't imagine how confusing this will be for logging when I make duplicates in multiple places for organizational purposes. I may even end up with the same clip with multiple names. The same is true for the metadata associated with the clip - if I add a comment in the comment field, it does not propogate. Markers, however, DO propogate to both, which is exactly as I would expect. Why not the metadata?
    Is there a way around this (short of never duplicating clips)?

    I agree, Premiere Pro is a bit weird in what it does and doesn't carry across duplicate clips. For instance, you can interpret the frame rate for a duplicate different than the other version of it. But if you go to timecode and enter a changed start timecode it effects both instances. I get why you would want to sync both name and metadata, but I also see benefits to not syncing it. Either way, I agree the option should be there. There also should be an option like fcp7 has, to rename a clip based on file name, or rename a file name based on clip name (but there isn't).
    That said, instead of creating duplicates of the clip in different organizational bins, you could create custom metadata columns. Therefore creating sort of a virtual bin.
    You could do that by going to the top right of the project panel and clicking on the little down arrow. Then go to metadata display (while in list view). Then you can click on Add Property in the Premiere Pro Project Metadata area. Then you could do a custom property, decide whether you want integer, real, text or boolean. You'd probably want text. So you could choose text and name it Flower. Then you could hit ok. Go back to list view, and type in flower
    Then in your project panel search box, type in flower and find all clips using it. A work around for sure, but may achieve what you want.
    P.S. It would be much better if you could create a boolean field and just search by the word flower and everything checked would come up in the search. Unfortunately the search is a bit stupid when it comes to this. So if you search flower with a bloolean field, nothing will come up! You have to search true or false, and then ANY checked box will show. Quite dumb! Definite feature request!

  • Lync monitoring Details reports are not getting opened, Getting SQL error like "Cannot impersonate user for data source 'CDRDB"

    Hi,
         Two month before, We have deployed Lync 13 set up with lync monitoring and archiving service enabled. After configuring we have the Lync monitoring and archiving services are working fine... few weeks back I have changed the Admin Password
    of the Lync Setup. After that Lync Monitoring and Archiving services are not working.
    when I try open Lync monitoring service from web UI, 
    http://localhost/ReportServer_LyncMonitoring/
    Web UI is opening but Reports home page is not Accessible , Getting error Like
    "An error has occurred during report processing. (rsProcessingAborted)
    Cannot impersonate user for data source 'CDRDB'. (rsErrorImpersonatingUser)
    Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
    The user name or password is incorrect"
    Please help me to trouble shoot this problem.
    Thanks,
    Rajarajan.D

    Hi Rajarajan.D
    You probably need to update the password against the CDRDB datasource in SSRS Report manager, take a look at this article: http://lyncme.co.uk/microsoft-lync-server-2013/cannot-impersonate-user-for-data-source-cdrdb-rserrorimpersonatinguser-error/
    If this helped you please click "Vote As Helpful" if it answered your question please click "Mark As Answer"
    Georg Thomas | Lync MVP
    Blog www.lynced.com.au | Twitter
    @georgathomas
    Lync Edge Port Check (Beta)
    This forum post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Change of UME data source from ABAP to LDAP

    Hi all
    we are running a NW04s installation with separate ABAP and JAVA stacks. As we thought our LDAP would be available soon, we configured the JAVA stack as UME data source and of course the ABAP stack for the ABAP-users.
    Now it looks like the LDAP will take some time to come. So we would like to change the JAVA data source to the ABAP, so that we can reduce the double work needed for the user administration (JAVA + ABAP).
    Now the questions. Once the LDAP will be available we would like to configure the user administration to use the LDAP.
    Is this possible, with or without SAP support? Can we get SAP support for this?
    Thanks for your answers.
    Edmund

    I know if you install the portal with an ABAP UME it cannot be changed to something else but assuming you install as database originally then I dont see why you could change from db --> abap --> ldap if you so choose?
    There doesnt appear to be any "technical" reason why you shouldnt be able to do this but almost all SAP documentation says you cannot.  I assume it has something to do with data inconsistency once the link is broken - probably leaving you with lots of users you cannot delete.  I get the distinct impression reading between the lines that you cannot revert back to ABAP when it doesnt work either, which is presumably why SAP do not recommend you even try .....
    Haydn
    PS.  Ive never actually tried it myself - ive been frightened by SAP telling me it doesnt work!!!!

  • Cannot set up Source for a view

    Hi,
    I am trying to set up a source for a view which I have created in the database. But when I try to do that I get this error.
    database link of same name has an open connection
    PL/SQL: unhandled user-defined exception
    PL/SQL: unhandled user-defined exception
    cannot select ROWID from, or sample, a join view without a key-preserved table
    preceding line from EQ$DBLINK65
    cannot select ROWID from, or sample, a join view without a key-preserved table
    preceding line from EQ$DBLINK65
    Can someone please let me know the issue
    Thanks

    Hi,
    your requirement is discussed here
    https://social.technet.microsoft.com/Forums/sharepoint/en-US/4589c31b-8473-4aae-b34a-79c9937bb6b1/alert-on-view-which-filters-to-items-not-changed-by-me-still-sends-alerts-for-items-changed-by-me?forum=sharepointadminlegacy
    Please remember to click 'Mark as Answer' on the answer if it helps you

  • Verizon Webmail Editing fails in IE9 - Cannot change Font or Character Size

    I recently switched from IE8 to IE9, and now in Rich Text I cannot highlight and change Font family of Font Size.
    The highlight disappears when I click one of the Font dropdowns, and the cursor jumps to the head of the message.
    I can select a Font size and/or family, then position the cursor, then enter text, and it is the correct size and family,
    but I cannot after that change it.  If I paste something into the message, I cannot change that.
    This fails on two computers running WIN8-64bit and IE9.
    It does not fail in Firefox.
    Verizon says it is Microsoft's problem.  I think Verizon's webmail client provider needs to talk to MIcrosoft.
    Does anyone have this configuration with this problem?
    Does anyone have this configuration without this problem, and if so, any idea what to change?
    Has anyone a solution to offer (except returning to IE8 where it worked)?

    Thanks for the quick reply, I tried disabling hardware acceleration but the moment I unchecked it everything started appearing a bit fuzzy. Not as crisp as it normally should. (unless the real effect happens after restarting FF)
    Regardless I still don't see how my graphics driver would be the issue, because isn't IE9 technically using it as well? And it showed those special characters just fine other than making em appear a bit smaller.
    Also I forgot to mention this, but atm its only happening when I'm viewing that particular page with FF. If I view another different site (like a forum) that has the same or at least similar sets of those special characters, they are showing up fine. If I copy/paste those texts from IE9 onto FF then again they would show up fine.
    There's also some forum posts I did which involved me copy/pasting those special characters from that page (before updating to FF12), now when I look at those posts they haven't changed at all as that page has.
    So the problem here is not being able to view those characters completely but rather why they would appear different especially on that page unlike when viewed from different sources/browsers.

  • Cannot Change Identities / Email where Submit button emails responses to

    I have created, entiriely, in LiveCycle a form. When it is distributed it AUTOMATICALLY inserts my own email to where the repsonses go to. Cannot - REPEAT CANNOT- Alter it.
    THIS IS NOT THE SUBMIT BUTTON THAT YOU PUT INTO A FORM.
    This is the "Submit" that is automatically generated and put into the PDF TAB when a form is distributed.
    I've gone into Acrobat / LiveCycle and changed "identies" but the response STILL goes to my Email. It NEVER picks up my changed Identity - and shows my own email and not the one I want responses sent to.
    Rebooted after chainging Identities  - STILL goes to my email.
    Edited in the Acrobat - STILL - goes to my email - SUBMIT button (automatically created when you distribute the form) ALWAYS says to send to my email.
    Edit the options/properties to change - MY EMAIL IS GREYED OUT AND CANNOT ALTER IT IN THE DISTIBUTON panel where you can select options as how the form is distrubited - selecting EMAIL response to form submission.
    It ALWAYS SHOWS my Active Directoy LOGON ID as the form OWNER - CANNOT CHANGE IT.
    We are IN an Active Directory environemnt and my logon account has NO RIGHTS to change MASTER registry Win7 entries at all - only (like normal) my own preferences - BUT LIVE CYCLE / ADOBE DOES NOT CHANGE ANYTHING with email at all concerning the auto email sent to portion. I can change "sent by" but NOT who I want responses sent to.
    Cannot FIND at all any XML preferences file in registry / file system to hack and manually change it.
    You look at the XML data in the form and it shows my email address - AND ALL XML data is BLOCKED from being edit at all in the form - and NO idea where it is pulling this information from.
    Is there ANY WAY at all to change --- WITHOUT WRITING ANY CODE - to alter where a distributed form is to send email repsonses to.
    CANNOT, REPEAT CANNOT - use any cloud, online or any external source at all. Cannot use Acrobat.com.
    Thanks,
    Tom

    The email address is coded into the server script file that processes the form data.
    Look for the below file on the server and see if you can open it and locate the email address. It's a Cold Fusion file
    act_email.cfm

  • Cannot change the print margins when printing out my spreadsheet.  Tried clicking on format and then Document but when I enter a number I always get " invalid number".

         I cannot change the margins when printing out my spreadsheet.  I clicked on the format then on document and got a entry box.  But everytime I try entering a number to change the left margin ( tried .5 ) I get an " invalid number " response.  I can print out the spreadsheet but always get a message telling me the margins may be too small and data may be clipped.  Data doesn't get clipped but left part of the spreadsheet is right at the left side of the paper.  Want to change the margin so I don't get that message.

    Naming the spreadsheet app would do wonders for getting an answer.

  • How do I change clip speed?

    I am putting together some clips in iMovie and would like change the speed of some of the clips.
    When I select a clip in the timeline, the Speed Control button is not highlighted so I cannot alter clip speed.
    How can I get the speed control to work?

    The speed control only works if you have not selected wrapped timeline.  Select View and uncheck "Wrappong Timeline".  I have requested Apple document this in the help files.
    Geoff.

  • Verify: Cannot change sequence settings

    So I just want to be sure that I understand this:
    I cannot change the details of the sequence presets in FCE HD. Correct?
    For example, I can choose the 'AIC 720p30' sequence preset, but I cannot change 30, to say 25?
    If I have an existing clip (AIC codec, 1280x720 @ 25 fps) there is no way for me to bring this into FCE without the software rendering it (thus reducing the quality of the existing clip).
    I just want to be sure I understand this correctly. I am very surprised that I cannot define sequence presets myself.
    Thank you for any clarification you might provide.
    BT

    Thank you Tom - I really appreciate your response!!
    I'm a software developer and I can't tell you how surprised I was when I discovered this limitation. So I decided to try to understand how these presets were defined by FCE.
    It is actually very easy (if you are technically inclined) to create your own presets in FCE.
    1) Find the FCE HD application in your Finder
    2) Right-click on this icon and select "Show Package Contents"
    3) Naviate to Contents/Resources/English.lproj/Final Cut Express Settings/Hardware Settings
    Inside this directory you will find *.fcpre files that define the presets for FCE HD.
    I am not going to explain how to modify these files but those among you who understand file formats should easily be able to create your own presets (it took me about 15 minutes to create a 720p25 preset).
    -BT
    PS: Do *NOT* attempt this if you don't know what you are doing. At an absolute minimum, make a copy of FCE before you start mucking around - if you mess something up FCE will fail to launch.

  • Help! I have a new iPhone 5s. My husband just lost his 4s, so I want to give him mine. Want to use same Apple ID so we both have access to itunes/apps purchases. Want to separate contacts, messages, mail, etc. I cannot change iCloud address.

    Help! I have a new iPhone 5s. My husband just lost his 4s, so I want to give him my 4s. We want to use same Apple ID so we both have access to itunes/apps purchases. Want to separate contacts, messages, mail, etc. I cannot change iCloud address on 4s iPhone. Also, when I tried to change iMessage I got a message that if I deleted my id (which seemed to be the only way to get my husband's I'd there), I would not be able to receive iMessages on any device.
    Would someone kindly tell me how to set up th 4s for my husband so that we can keep our info separate? It would be most appreciated! Thanks!!

    Hey Fagen!
    You will want to see the following article for guidance on achieving the result you wish to achieve:
    What to do before selling or giving away your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/ht5661
    I would just follow the instructions from this article to give your unused 4s to your spouse. Since you have already started using your 5s, you will still be receiving iMessages on that phone and will have no need to receive them on a device that has been replaced. Thanks for coming to the Apple Support Communities!
    Cheers,
    Braden

Maybe you are looking for