Cannot change column size in iPod Classic

I received my Classic today and transferred over all my music. After making changes to various things, I tried to adjust the size of the columns. I cannot.
I was able to delete a column, then re-add it then change the size. In my 5th Gen Video ipod I could just but the cursor on the right side of the column and click, it would adjust to the size of the largest, Name, Artist, Album etc. I am able to change column sizes in itunes, just not the ipod.
I've looked through threads to find something that resembles my problem but most seem to be with itunes and not the ipod. Both computers I use are updated to 7.4.1
I was wondering if I restore the factory settings would I be able to change the column sizes without having to delete and re-add them? Or is this another new lovely and VERY annoying update to itunes/ipod?
Thanks.

I can confirm that it's not (specifically) your iPod and it's not your OS. I'm running the newest iTunes through Mac OS 10.3.9 with a 3G iPod and just made a playlist with the same problems. NONE OF MY OTHER PLAYLISTS are affected - the columns there adjust just fine, but any NEW playlists I generate on my iPod will not allow me to individually adjust columns. Right-clicking on a column header does not even allow me to "Auto Size Column", but only to affect ALL the columns, or choose a column to add or remove.
Interestingly enough - new playlists I generate in iTunes (not on the iPod) work normally. However, it isn't feasible for my 10GB hard drive to automatically sync with my 15GB iPod, so I can't test and see if dragging a playlist to the iPod will generate one with alterable columns.
My opinion is that this is in some way related to the 7.4 or 7.4.1 update. I believe I last generated a playlist before the 7.4 update, and had no problems.

Similar Messages

Change namne on an ipod classic?

How do you change namne on an ipod classic?

You mean when it is connected to iTunes? Double click on the name in the sidebar, the field can then be edited. If you are referring to something else, please elaborate.
HTH

I cannot turn my 80 g Ipod classic on.

I cannot turn my 80 g Ipod classic on. I tried restart with menu and play buttons. Had it charging in car battery felt hot. Also couple drops of water got on it but it did have a case on it?

the water may have damaged the board inside the ipodor the battery may be damaged

Possible to change the DAC in iPod Classic?

I have a 160GB iPod Classic filled with around 300 cds in lossless format. The size of the hard drive and ipod interface are great but the sound quality leaves a lot to be desired. I use Sure SE530 and Etymotic ER4P earphones, which sound amazing through the headphone amp in my regular Hi-Fi so I know it's not them. I have read that the Cirrus DAC is very likely the weakest link in this generation. Is there any way to change it out with a higher quality DAC Chip?

Apple could pretty much own the digital audio segment if they made a commitment to audio quality. If they were to make lossless files available on itunes, and built high quality dacs into their ipod and computers, they would put the CD player, transport and music distributors industries out of business. Until they find religion, we will have to fend for ourselves. Your question is really important, for if you are going to the trouble and expense (hard drive capacity use) of storing lossless files, you are also interested in the quality of the sound that comes out of your machine. Well, the solution is difficult. Most commercially available ipod docks are not line level and fewer still are digital out. If you can adjust the volume on your ipod after it is docked, then you are basically listening to the output that you would hear from your headphone jack. The reason the headphone jack sounds so bad is that is uses the internal dac of the ipod, and due to the limitations of headphones and earbuds, the headphone out bass is also attenuated. Therefore, it is important to find a dock that will use the digital source prior to the dac from your ipod. There are a few out there. Wadia makes a very expensive truely digital dock, and then you have to hook it up to your own dac with its digital out. Also, Red Wine Audio will mod a 3rd generation Ipod and upgrade the dac. Unfortunately, these solutions are so clumsy and expensive that you're better off using a Macbook or MacMini, with lossless files, and a USB dac to your audio system rcas. Someone needs to invent a compact digital dock with an integrated dac to make the ipod practical as an audiophile source. Their material doesn't get specific, so I can't figure out if the SRS iWow for the ipod is a dac, or an equilazer, but I suspect it does not bypass the ipod's dac. I'll have to call them in order to pin them down. If it simply acts as a preset equalizer, it is not much of a product. It will not add detail back to the music, nor will it be able to process the digital data in a refined manner, when compared to a quality external dac. In the meanwhile, any mac or pc can be converted into a digital source better than cd players selling for many thousands of dollars. I have one mac mini hooked up to a tube dac (and to tube monoblock amps), and another mini hooked up to an external dac and a tube buffer (and to a single ended tube amp). My next project is to figure out how to wirelessly stream my music files from my main mini, to the other one or my macbook, and to use mac tv to backup my main computers' files. I was told tonight that I can change the settings on my Airpot Extreme to do this, and I can add the mac tv later to back everything up. Other than that, all you can do is pray that Mac introduces an ipod for audiophiles. Then you can just put docks by each computer you use, wherever it is in the world, and have a first class digital source. I use dac and a USB chord with each of the other systems in my house and just plug the macbook into whichever system I want to listen to at a given time. Good luck.

Change column size

At the publisher's request, I need to change the book size from 7x10 to 7.5x10.5
I would like to avoid reformatting every page in every chapter. I want to keep the column size the same and just increase the margins. However, when i change the page size, the three columns automatically adjust to that new size.
I have tried selecting "adjust layout" but it doesn't help. There doesn't seem to be any option for columns except how many there are. Is there any way to adjust column size independent of page size?

Peter's last answer was pretty good.
Did you make your columns by drawing three text boxes on a page, or by drawing a single text box with three columns inside it?
Did you make your columns by making a master page? Or did you draw a whole bunch of text boxes for each page of your document?

Changing column size

Hi
I am working on oracle 8i. I have requirement to change a column size from varchar(3) to varchar2(4). I know the command to change the column size. all I need to know, their are 6 child tables. they are referencing this tables column.
what is the best way do I need to change child tables column size first and then i need to change column sixe of main table. do i need to consider to change views and triggers ans indexex.
please help me

Hello,
You would increase dramatically your chances to get an answer by posting in the Database forum.
Francois

JTable: Changing column sizes

Hi,
i have two JTables, when one table's column is resized i want to change the size of the equivalent column in the other table.
this is the code i use:
getColumnModel().addColumnModelListener(new TableColumnModelListener() {
            public void columnMarginChanged(ChangeEvent e) {
                if (e.getSource() instanceof DefaultTableColumnModel) {
                    DefaultTableColumnModel dcl = (DefaultTableColumnModel) e.getSource();
                    setTotalTableReferenceModel(dcl);
            public void columnSelectionChanged(ListSelectionEvent e) {
            public void columnAdded(TableColumnModelEvent e) {
            public void columnMoved(TableColumnModelEvent e) {
            public void columnRemoved(TableColumnModelEvent e) {
public void setTotalTableReferenceModel(DefaultTableColumnModel dcl) {
        DefaultTableColumnModel colModel = (DefaultTableColumnModel) totalTableReference.getColumnModel();
        colModel.getColumn(0).setPreferredWidth(200);
        colModel.getColumn(1).setPreferredWidth(200);
        colModel.getColumn(2).setPreferredWidth(200);
        colModel.getColumn(3).setPreferredWidth(200);
        colModel.getColumn(4).setPreferredWidth(200);
        colModel.getColumn(5).setPreferredWidth(200);
        colModel.getColumn(6).setPreferredWidth(200);
        colModel.getColumn(7).setPreferredWidth(200);
    }so basically, on column change, i set the sizes of the other columns to test does it work, but the other table's columns don't move.
any ideas?
Thanks.

Works fine for me.
Here's a simple example:
public class Test {
     public static void main(String[] args) {
          JFrame frame = new JFrame("Test");
          frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
          frame.setLayout(new BorderLayout());
          final JTable table1 = new JTable(new DefaultTableModel(new String[][]{{"1", "2"}, {"3", "4"}}, new String[]{"col1", "col2"}));
          final JTable table2 = new JTable(new DefaultTableModel(new String[][]{{"5", "6"}, {"7", "8"}}, new String[]{"col3", "col4"}));
          table1.getColumnModel().addColumnModelListener(new TableColumnModelListener() {
               public void columnAdded(TableColumnModelEvent e) {
               public void columnMarginChanged(ChangeEvent e) {
                    for (int i = 0; i < table1.getColumnCount(); i++)
                         table2.getColumnModel().getColumn(i).setPreferredWidth(table1.getColumnModel().getColumn(i).getWidth());
               public void columnMoved(TableColumnModelEvent e) {
               public void columnRemoved(TableColumnModelEvent e) {
               public void columnSelectionChanged(ListSelectionEvent e) {
          frame.add(new JScrollPane(table1), BorderLayout.NORTH);
          frame.add(new JScrollPane(table2), BorderLayout.SOUTH);
          frame.pack();
          frame.setVisible(true);
}If you want further help post a Short, Self Contained, Compilable and Executable, Example Program (SSCCE) that demonstrates the problem.

I click on layouts and still cannot change book size

I'm trying to change the size of the ibook before I buy it. I've tried several options buy cannot figure it out. Any help would be appreciated.

duplicate the book for safety and then click on themesand select teh same theme with a new size
LN

HT201279 Cannot change font size

Am having trouble changing my font size when printing some emails and attachments . So small i cannot read .When I do change the size it changes back when I start to print . Anyone have the same problem .

I have stopped using Text Edit as I find it flaky. Instead I prefer Bean:
http://www.bean-osx.com/Bean.html
which does not have that problem!

Cannot change column width

Hi, when my 3rd gen nano is connected and iTunes is open and I am in my nano library, I cannot change the column width.
When I try to change the column width in the iTunes library it's no problem, but once in the nano library I cannot.
What gives ?
Mike.

Uncheck *Manually manage music*, click Apply then again check *Manually manage music*.
I don't like auto sync.
Any reason in particular?
You can create specific playlists and autosync only those.
Add/delete form these playist to add/remove form theiPod.
Using autosync is the only way all the info (ratings, playcounts, date played, etc) will get transferred back to iunes.

Cannot change page size with acrobat

I am able to convert my manuscript in Mac word(2011) to adobe acrobat (XI); unfortunately the 6 X 9 " page size does not convert. I spent a few hours on the phone with adobe support and the final resolution was to upload the file to them and they converted it for me. however, they used distiller which reduced the file size and appears to have affected the many images. Does anyone have any advice? The best I have been able to glean online is work with inDesign to change page size.

Thanks.
The problem was with the paper size. In addition to change the page size I needed to change the paper size in the print option before selecting save Adobe PDF.
From Word go to File> Print
Open the Copies & Pages dropdown
Select Paper Handling
Check the Scale to fit paper size box
Open the Destination Paper Size list
Select your custom 6x9 Preset
Click the PDF button
Select either Save as PDF or Save as Adobe PDF
The unfortunate thing is that I was able to do this initially, but when I went back to replicate it adobe is creating 2 files one with my cover page and the rest to the manuscript. Luckily my initial copy was good. Thanks again for your help.

My eraser tool acts weirdly. Everytime i use eraser tip on my pen, I cannot change the size of it with either tablet wheel or brackets. It changes the size of a brush tool instead. This was not happening in CS6.. Any ideas?

So this problem is annoying me. Is there any setting that has been added and this got messed up or is it a bug? In CS6 I could turn around my pen and use the eraser tip and change the size of it.
Now in CC 2014 I can't do it. I have to manually click the Eraser tool, and then change the size. I must say this is annoying as hell.

Reset the tool? What do you mean?
EDIT: Never mind, i found out how to reset. I Ctrl+Right clicked and reseted both brush and eraser but it still doesn't fix the issue. I also downloaded PS CS6 version and it works fine there.. So I don't know what it is. Must be a bug in CC 2014..

Cannot change font size when highlighted. All font changes. How do I correct this?

Frustrated as to why when I highlight a single word to change font size or style every word on the page follows the adjustment. I need to be able to change words individually with font, size and color.

I have stopped using Text Edit as I find it flaky. Instead I prefer Bean:
http://www.bean-osx.com/Bean.html
which does not have that problem!

Cannot add videos to my iPod "Classic"

Hi, I just converted a video from a DVD with Handbrake 0.9.5 and couldn't then add it to my iPod. I did a search in spotlight for the file and it came up as a "protected MPEG-4 movie". Now I've followed this proceedure many times over and never had this problem before what has happened to make this occur. Is it Handbrake or QT 10 as igirl1 wrote: discussions.apple.com/thread/2633767?start=0&tstart=0. This file plays just fine in iTunes and sending it to the iPod the green plus sign comes up but nothing happens. Please can anybody help?

Sorry didn't realize the forum was incorrect as the path above reads:
Apple Support Communities > iPod > iPod classic > Discussions

Regular selection tool cannot change object size

I am using CS6. When you create a simple square or any object, you will be able to use the regular selection tool to change the size by draggin on the "control point" around the object.
However, I was able to do it before but I dun know why I can't do it suddenly. The regular selection tool just enable me to move the image even I click on the "control point" on the object. If I need to change the size, I need to use the resize tools which is a hassle.
Anyone knows what happened? Am I having some wrong setting in my AI ?

View > Show Bounding Box

Cannot change column size in iPod Classic

Similar Messages

Maybe you are looking for