Cannot change dates in new upgrade

Since the upgrade of iphoto this week i have been unable to change the date of my events, When i bring the event up and check info the date is correct but not on the event page, This becomes a problem when i would like all my evens in chronological order,,,,,Can anyone help. PLEASE

This has been reported a few times - I have not seen it
Report to Apple - iPhoto menu ==> provide iPhoto feedback
If things are working correctly the event dates are simply a reporting of the dates of the photos within the event - be sure that there is not a photo in there with a wrong date - try welecting all of them and adjusting the time by one seond and marking to change the original and see if that has any effect
LN

Similar Messages

HT3140 put a date 1970 june 27 . and now the whole system is out of control i cant get to internet cannot change date and time always when i opened system preferences stays in a waiting mode but doesnt show any opcion don t know what to do and i just bou

put a date 1970 june 27 . and now the whole system is out of control i cant get to internet cannot change date and time always when i opened system preferences stays in a waiting mode but doesnt show any opcion don t know what to do and i just bought this computer

It may well be a driver issue but considering the loading: Xorg trying to load different drivers is somewhat normal. @cafe you can see that these are autoconfigured by X above the loading in the log:
Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched intel as autoconfigured driver 0
Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched intel as autoconfigured driver 1
Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched modesetting as autoconfigured driver 2
Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched fbdev as autoconfigured driver 3
Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched vesa as autoconfigured driver 4
As long as one of the drivers gets loaded, which it apparently does the failing of the others is fine.
Was there an update maybe ?

OSX 10.5.8- cannot change date and time. Have changed pram battery, still have spinning rainbow dot.

I have an older Powermac G5 dual PPC processor with OSX 5.8 (Leopard) on it. I cannot change the date and time, all I get is the spinning rainbow disc and the prefs have to be shut down. Does anyone know how to get this back on track? Thanks in advance!

Let''s try a new admin account...
Reset OS X Password Without an OS X CD...
http://theappleblog.com/2008/06/22/reset-os-x-password-without-an-os-x-cd/
Admin Hack...
http://www.hackmac.org/?q=node/4
Starts up like the first time you buy a new Mac, but after filling in all that info again, you should have access to the computer and the other Users & files will still be there... give the new User a different name than an existing one.

Cannot change account picture after upgrading to Mountain Lion.

After upgrading to Mountain Lion from Snow Leopard I cannot change account picture anymore.
The box which is supposed to contain picture previews just says "No items".
Screenshot attached:
This is not limited to a particular account, trying to change the picture within any account leads to this problem.
Is there any solution for the issue?
Thank you in advance.

Thank you for the answer.
Sure I can drag a photo to the users profile and it works but those Default ones were quite useful for having no mess with setting custom picture.
MacBook Pro with same Snow Leopard -> Mountain Lion upgrade did not have such issue.

Cannot change date and time settings, popup "These files can't be opened: Your internet security settings prevented..."

When I try to change my date and time settings I get a Windows Security popup that reads: "These files can't be opened. Your Internet security settings prevented one or more files from being opened. C:\Windows\system32\rundll32.exe"
I have Windows 7 64 bit. I also have McAfee SecurityCenter installed. I have tried turning off my firewall temporarily, but the problem persists. I am not sure if it is some type of virus. If anyone could give me some information
as to what could be causing this I would appreciate it. Thanks in advance.

Hi,
Perhaps, this issue is caused by a sign of corruption.
Please try to use sfc/scannow to check the System Files.
Also, You may refer to the following link.
http://www.sevenforums.com/general-discussion/71526-cant-change-date-time-2.html
Important Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Cannot edit data model after upgrading to 10.1.3.4.1

Hi,
I've recently upgraded from 10.1.3.4 to 10.1.3.4.1 running under Tomcat 6.
But now I cannot work with data models anymore. When I click on 'New' while Report > Data Model is selected, a new model is created but I cannot work with it.
While editing an existing report, clicking on a data model does nothing. In IE8, I can see the following error message:
Webpage error details
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 2.0.50727; FDM; .NET CLR 3.0.04506.648; .NET CLR 3.5.21022)
Timestamp: Sun, 13 Sep 2009 10:12:06 UTC
Message: 'ds_fixed_schema' is null or not an object
Line: 746
Char: 5
Code: 0
URI: http://...:8080/xmlpserver/js/xdoeditor/datasetpanel.js
Any help would be greatly appreciated.

I dont think BIP is certified on IE8 yet. would recommend either dropping back a version or using FF
Tim

Cannot Change Data Source - Error The memory could not be "read"

We have some reports that were created under Crystal Reports version 10 using a Sybase 12.5 database as the datasource. We have since upgraded to Sybase 15 ASE and we are also attempting to upgrade these reports to Crystal Reports version 11.5. The reports will convert to version 11.5 but will not work because of the following error:
"Failed to load database information. Details: The database connector 'crdb_p2ssyb10.dll' could not be loaded"
From previous experience we know that Sybase 15 is only supported via ODBC with Crystal Report 11.5, so we tried to change the datasource to ODBC, but when we do that we get the following error:
The instruction at "0x0e864b11" referenced memory at "0x00000004". The memory could not be "read".
Do we have any options at this point besides competely re-creating the reports?

We are using CR 11.5 and trying to change the data source to ODBC. I can create a new report and use the same stored procedures as a datasource via ODBC with no issues. I only have an issue when trying to change the data source on these existing reports.

I cannot change date or batch change

I have run all updates to iPhoto 11. I've moved all the pictures out of my library and made a new library. Apple re-installed the iPhoto application for me which did fix the dates from being 0032 to 2011 etc.
Yet when I go to change the date to match the date the image was actually taken it will not update.
Any ideas?

Hi. Thanks for responding. Before we go further I must explain that I am computer illiterate and a dinosaur.
I bought my computer a few months ago and using current photos on my digital camera started to build a library. If I had taken photos over a period of dates I split them into the correct dates using the program. I then added other photos from family members via memory sticks and again had no problems. These probably only arose when I began to scan in old photos with dates I put in from about 1920 onwards although I put in a family tree dated 1760. After a couple of weeks I noted that the batch date or the individual date of a photo was being corrupted to a year of 0023 and photos were being date filed accordingly.Some dates appeared to change without any input from me.
Yesterday I spent 2 hour on the "Genius Desk" to no avail despite two guys trying to work on the problem full time.They have set up a new Iphoto library which has brought back original dates of either when photos were taken or scanned into the computer. However they were unable to transfer the descriptions I had given to the 350 odd events. It also brought back all original photos I had put in trash and all photos were in their unedited form. Also, all but the most recent photos were now dated 0023 in the original library. I have tried to change this date and obtained another odd result. I tried to change 0023 to 1990 but it then became 0091 rather than 1990 when you checked from the top bar but retained 0023 in the library.
It appeared to the guys at Apple that given other postings on the web this was an uncommon but reoccurring program problem and probably an update was to be expected. I am back next week when they are to try reloading a certain program (don't know what) but they thought the success rate was likely to be 20% or less.
I have tried to think of anything I could have done to corrupt the program and have 1 possible explanation as I believe it happened roughly at the same time as the problem manifested itself. On a scanned photo I was changing a date - I think it was the batch date- and instead of using the "up/down arrows" to change it, typed in the year.I did not realise that this defaults to 0000 very quickly and hit the save button probably with this as the batch date. It did alter again after I realised my mistake but problems I am sure began after this.
Thanks again for your interest and hope you can help.
Regards.
Derek Key

EA1 - Cannot Change Date Format in SQL Results

In version 1.2, I used to go to Tools > Preferences > Database > NLS Paramters and change the date format there. The change would then be reflected in the SQL results for date columns.
When I try to do the same thing in 1.5 EA1, the date format is always the same, DD-MON-RR, no matter what I put in the date format setting under NLS Paramters.
Am I missing something?
Thanks.

Just a quick post to make sure that the bug you logged takes into account all NLS parameters :), as this does not concern only dates but also timestamp formats, decimal and group separators as well, and probably all of the NLS parameters I assume.

Cannot change date format in delimited output

Hi,
I am launching a series of Reports from a Forms environment in pdf format without any problem.
However, we're finding trouble when setting the format to excel (desformat=delimiteddata in set_report_object_property). Date fields which include hour and minute are being truncated ('18/05/2007 12:10:00' to '18/05/2007'). This is a highly undesirable behavior and we would like to fix it.
We have been following online help and found out that dateformatmask parameter is the key to achieve this. We have included it in the report launch string that is used inside the web.show_document built. This is the way it looks:
/rwservlet/getjobid2574?server=rep_cspas&mimetype=application/vnd.ms-excel&dateformatmask='DD/MM/RRRR HH24:MI:SS'
However, report date fields format keeps being wrong. Any clue about this?
Thanks and regards,
Fernando Gorostiza.

Thanks, but that's a kind of solution I had already thought of but which I wanted to avoid. We have over 60 reports, and although I can make one developer change every date field inside each of them, I believe it's quite a big waste of time considering the existence of dateformatmask parameter.
Any other idea?

How can I change dates to new sequence with jumbled slides?

I've been scanning thousands of old slides and negatives. Some of the slides have several boxes mixed together, and they have got scanned in the wrong order. I have used albums to try to sort them into the right order. I've been trying to use the Aperture 3 Metadata data adjustment to force the dates to follow the sequence in the albums. However, as far as I can tell if I select all the images and then make the adjustment, it applies the same data/time offset to each image (or possibly a slightly smaller adjustment to each, I'm not sure)! This does not have the effect I want; the images in the original project still end up jumbled, and the dates in the album slides don't show a simple monotonic increase.
Do I have to adjust each one separately, or is there a better way? Thanks,

Hello Chris,
here is a little Apple Script, that does adjust the dates.
Select a set of images in Aperture and run the script from the Script Editor.
The scrip will read the EXIF tag "Date" of the first image of the selection, that set the dates of the subsequent images with a fixed increment, currently set to one hour. If you want smaller steps, just change the the first variable.
set timeIncrement to (1 * hours)
(* select at least 2 images in Aperture *)
tell application "Aperture"
activate
          set imageSel to (get selection)
          if imageSel is {} then
                    error "Please select an image."
          else
                    tell (item 1 of imageSel)
                              set imageDate to value of EXIF tag "ImageDate"
                    end tell
                    repeat with i from 2 to count of imageSel
                              set imageDate to imageDate + timeIncrement
                             adjust image date imageDate of images {item i of imageSel}
                    end repeat
          end if
          return imageSel
end tell
I put an Automator Workflow wrapping that script onto my webpage:
http://leon64.kabelhosting.net/dreschler-fischer.de/scripts/AdjustTimeInIncremen ts.workflow.zip
To run it from inside Aperture, uncompress it and install it in your User library in the "Services" folder, then you can run it from the Aperture Services menu. Edit and adjust the timeIncrement variable just as you like it.
Select two or more images, and go to Aperture -> Services, select the service, and it will increment the dates, just like iPhoto used to do.
Enjoy
Léonie
P.S: That is just a prototype without much testing, so please test it carefully before you try it on important data!!

I cannot change time in NEW EVENT scheduler box

The time has a letter in the hour place. It can be highlighted but will not change to a number

gueroboi,
Glad to hear your problem is resolved.
Resolving Disk, Permission, and Cache Corruption, by Dr. Smoke would have been my next recommendation. You might want to be aware of what you can do on your own.
;~)

Cannot change APN for new SIM card

Dear all,
I had a Telekom contract in Germany. Now I changed to Congstar and inserted the SIM card. But there is no netweork access. I researched and I need to change the APN settings. However, these are not accessable in the settings menu. It is somehow hidden. What shall I do?
Kind regards
Topas21

OK. The solution was that Apple needs to unlock the handy, meaning to open the simlock.
I thought simlock is only applicable if you buy a handy that is right from the beginning locked to a specific carrier. But apparently Apple also adds a simlock if you buy a handy without simlock and adds this after you chose your first carrier. Then they have to release it afterwards. Makes no sense to me. But it adds restrictions, so Apple likes it...

Garage Band '11, version 6.0.5 will not change key after new project is started

Garage Band '11 version 6.0.5: Cannot change key after new project is started.
It has always worked ok prior to this. And I have had other issues. How do I reinstall Garage Band '11?
I have looked in downloads, but can'ty find any download file. I had upgraded to Mac OSX 10.6.8 couple years back, which included
Garage Band '11, a new ITunes & new IPhoto.

Before reinstalling I'd try HangTime's fix for "oddball" problems and delete the User preferences and repair permissions, see the FAQ:
http://www.bulletsandbones.com/GB/FAQPages/OddBallProbs.html
The GarageBand 6.0.5 update is here:
GarageBand 6.0.5
If you want to reinstall, install again the GaragaBand application from your installation disk and then upgrade again to 6.05 using the link above or Software update from the Apple Menu.
Regards
Léonie

Have Macbook Pro & 4th gen iPod Touch. Downloaded & installed iOS 4.3.2 yesterday. Upgrade went without a hitch, but now iTunes on My Macbook Pro will not open. I get an error that says "iTunes" Data too new to be used with this version of iTunes.

Have a Macbook Pro and a 4th gen iPod Touch. Downloaded and install iOS 4.3.2 yesterday. Upgrade went without a hitch, but now iTunes on My Macbook Pro will not open. I get an error that says --The file "iTunes Library" cannot be read because it was created by a newer version of iTunes--. I am running iTunes 10.1. I searched for Updates to my MacBook Pro (running 10.6.7), but comes back saying no updates available. WHAT IS GOING ON??

Is your computer still authorized in the Store menu in iTunes?
iTunes Store: About authorization and deauthorization
When I changed to my new MacBookPro I had to authorize it although I used TimeMachine to transfer my settings and data.
Did you try to deselect Wi-Fi syncing and enable it again after that?
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi syncing
Did you already transfer your purchases and manually started a backup?

Cannot change dates in new upgrade

Similar Messages

Maybe you are looking for