Cannot change destination bin during confirmation

Dear SAP experts,
We are in SAP ECC 5.0. We read that we can change the destination bin during confirmation of TO. We have done the pre-requisite:
1. In relevant storage type (001) we input '1' for dst bin ch during confrm field
2. Untick physical inventory during placement to bin
Then we do GR to PO, which generate TR. We create TR into TO and specifying bin INTERIM in storage type 001. During confirmation in tcode LT12, I cannot change the destination bin. What else do I miss in here?
Best regards,
John

Hello John,
Even though config mentions change of destination bin, there are quite a few limitations.
Have a look at below documentation from SAP
http://help.sap.com/saphelp_47x200/helpdata/en/c6/f83e5a4afa11d182b90000e829fbfe/frameset.htm
Snapshot of some imp content.
No destination bin can be entered during confirmation for
dynamic coordinates
transfer orders with return subitems
Lean WM (if the destination bin is defined in the movement type)
posting change TOs
inventory based on putaway
additions to existing stock in storage units
stock removal from or putaway into bulk storage
two-step confirmation
transaction Confirm single item
the case where you are using a putaway strategy
all other items in a TO with storage units, if you have already confirmed the first item for the storage unit. The system changes the destination storage bin for all dependent items during confirmation of the first item.
stock removals from a bulk storage managed with storage units
Check if your putaway falls in any of the criteria.
Cheers,
Nag

Similar Messages

Cannot change transaction isolation during distributed transaction

Hi All,
When ever the IPortalComponent session expires my application is throwing Null pointer exception. So I am catching the NullPointer exception and then reloading the page again. It is working in frontend without any issues.
But in the error log monitor(nwa) I can see the below error when reloading the page after component session expires.
Cannot change transaction isolation during distributed transaction and when the connection is shared. DataSource name: "PRODB2
As per my knowledge I understood that this is happening beacuse application is trying to recreate a new connection pool while one pool instance is alive.
If this is correct can any one tell me how to destory the pool of current session when reloading the page.
Thanks in Advance,
Chinna.

What was the solution to the problem ?

Change of Bin while confirming TO (Picking strategy FIFO)

Dear WM experts,
We use FIFO strategy for picking. Now for an outbound delivery we have the requirement to generate TO automatically. During confirming of the TO we should have option to change the suggested Bin (in the source storage type).
Could you please confirm what settings in IMG should I take care of for achieving this.
Thanks a ton.
Kamal

Hi,
I'm afraid it isn't possible...
You can set destination storage bin change for your storage type in SPRO:
Logistics Execution ® Warehouse Management ® Master Data ® Define Storage Type
You can find a field called 'Dst bin ch. during confirm'...BUT SAP help says:
'No destination bin can be entered during confirmation for
- dynamic coordinates
- return items
- Lean WM (if the destination bin is defined in the movement type)
- posting change TOs
- inventory based on putaway
- additions to existing stock in storage units
- transaction Confirm single item'
I guess you are using dynamic bins for outbound deliveries...
http://help.sap.com/saphelp_46c/helpdata/en/c6/f83e5a4afa11d182b90000e829fbfe/frameset.htm
Just my opinion...
BR
Csaba
Edited by: Csaba Szommer on Jun 3, 2008 8:38 AM
Edited by: Csaba Szommer on Jun 3, 2008 8:38 AM

Change destination storage during putaway

Folks,
I would need to be able to change the destination storage bin during putaway. I;ve set the indicator in the storage type, however, I am not able to change the destination bin. Any suggestions?
Thx,
MdZ

Hi Csaba,
it was exactly what I read when I have this problem:
"No destination bin can be entered during confirmation for
dynamic coordinates
transfer orders with return subitems
Lean WM (if the destination bin is defined in the movement type)
posting change TOs
inventory based on putaway
additions to existing stock in storage units
stock removal from or putaway into bulk storage
two-step confirmation
transaction Confirm single item
the case where you are using a putaway strategy
all other items in a TO with storage units, if you have already confirmed the first item for the storage unit. The system changes the destination storage bin for all dependent items during confirmation of the first item.
stock removals from a bulk storage managed with storage units"
As I wrote Continuous inventory upon placement into stock indicator must be unchecked.
Andrzej

RF change destination bin

Experts,
I am trying to change the destination bin in RF putaway LM02 transaction.
I hit the F7 NBin go to Change destination screen where i am asked to verify the bin and enter the modified dest bin.When its says verify the bin, should i scan the new bin or scan the old bin ? If scan the new bin in the verify bin field(triggers 'enter' upon scanning) , it takes me back to the previous destination screen with no change of the bin.
If I scan the new bin in the modified dest bin directly , which again takes me back to the destination screen with no change.
What are the actaul steps to perform without having the user manually enter the new bin ?
Thanks for time in advance
Edited by: RKsap193 on Mar 23, 2010 2:51 PM

I tested this practically.Please follow below process
1.Scan the new bin in field ""Verify bin"where you want to do putaway of material .
2.After scan you have to say F7 check. It will automatically display new bin in Modified dest bin field.
3.Say F1 confirm. By this system will bring you to "Destination Information -Single item " screen where you will find the destination bin is changed in destination bin field.
By this in TO display you will see new scannned bin with the putaway & confirmation.
Regards,
Prashant

Batch: From Bridge; cannot change destination folder

I'm suddenly unable to change the destination folders for batches. When I try to change the folder, I only see the current folder I am in and unable to change to another one.
CS4
Windows 7

Try the Bridge forum:
http://forums.adobe.com/community/bridge?view=discussions

Cannot change destination for download

With PowerBook G4, MacOSX10.5.8, Treo 755p, HotSync 3.2.1
I am trying to download PocketTunes' EyeTunes from my Mac, however, I cannot get EyeTunes to move from the SecureSD side to the Handheld side. Nor will EyeTunes download from the SecureSD side. The error msg produced is
"the file eyetunes cannot be installed to the handheld". Have also tried removing the SecureSD card, but no go.
I had to replace my old Treo 755p with another Treo 755p because the speaker failed and now I am having trouble getting PocketTunes up to the version on my old Treo, because I cannot get PocketTunes downloaded.
Appreciate any help,
Thanks, -Diane

With PowerBook G4, MacOSX10.5.8, Treo 755p, HotSync 3.2.1
I am trying to download PocketTunes' EyeTunes from my Mac, however, I cannot get EyeTunes to move from the SecureSD side to the Handheld side. Nor will EyeTunes download from the SecureSD side. The error msg produced is
"the file eyetunes cannot be installed to the handheld". Have also tried removing the SecureSD card, but no go.
I had to replace my old Treo 755p with another Treo 755p because the speaker failed and now I am having trouble getting PocketTunes up to the version on my old Treo, because I cannot get PocketTunes downloaded.
Appreciate any help,
Thanks, -Diane

Change of bin not possible during TO confirmation

Hi all.
I am trying to change the destination storage bin during transfer between bins (WM movement 309).
The strategy is fix bin (maintained in material master), so the TO is created with fix destination bin and operator must change it before confirmation.
For example, in GR it is possible to change destination bin during confirmation in transaction LT12 but not for transfer. The receiving storage type is the same in both cases. Is there any customizing missing?
Apart from this, is there any way to confirm items separately inside a TO? For example, during GR I try to confirm a TO in transaction LT11 for just one item and waiting for the rest to be placed physically in order to confirm all the TO but destination bin can not be modified in LT11. Is there any way to confirm item per item but allowing changing destination bin? it is possible to do it in LT12 but not in LT11.
Many thanks in advanced and best regards.

Hi,
Generally, it is possible to change the destination bin during TO confirmation. However, this is not possible under the following conditions:
o With dynamic coordinates
o If the destination bin location is specified in the movement type
o For posting change transfer orders
o For the physical inventory using a putaway
o For the addition to existing stock for storage units
o For the transaction Confirm Single Item (transaction LT11)
o If a bulk storage type is involved in the stock movement
o In the event of an individual putaway strategy
o If the first item of a TO with storage units is already confirmed
   since all the other items of the storage unit relate to the same
   storage bin. When you save the first TO item, the system changes
   the destination storage bin for all dependent items.
o If this is a replenishment transfer requirement for a fixed
   storage bin.
Please see SAP Note number 443916 for an explanation.
Thank you.
Patrick

WM: Change source bin confirm transfer order

Hi guys,
Do you know if I can change source bin when confirming the transfer order.
I know I can customize the system if I want to change destination bin when confirming the transfer order.
Thanks,
Fatih.

Hi,
Hope you cannot change the source bin but as per the configuration in the picking strategy in the customizing you can define the picking sequence for the souce bins.
example: like check bin " A" if ......(condition)...then pick from bin " B " or pick from bin " C".
Regards,
Ravindran

Change Storage Bin Number in 309 movement type

Hi Gurus,
I have problems with creation TO for movement type 309(material to material posting), when i want to create the TO for that movement type, i can't change the destination bin.. The destination bin field in that TO is disable, how to make that field enable?
I try to add an user exit after creation of that TO, the user exit is MWMTO001.. so the user exit used for change the storage bin number after the TO created.. but that user exit never triggered after TO created.. How it could happen?
Any suggestion, how to change the storage bin number when i want to create TO from 309 movement type(material to material posting)?
Kind Regards
Ken

Hi Kris,
Ya, i already create the bin number, for example i material A fixed to bin 00001 and material B fixed to bin 00002, when i do movement 309 from material A to material B, why the bin goes to 00001? why not goes to bin 00002? Because material B is fix to bin number 00002..
For your solution, i just can change the bin during confirmation of the TO? Because, in this case, confirmation of that TO done by external system, so the external system will send idoc to SAP to confirm that TO..
Regards
Ken

Destination Bin change in Pick Module Replenishment scenario

Dear Experts,
We have a requirement to perform destination bin change during TO confirmation into the pick module for replenishment scenario. The requirements is as below:
System set up:
We have a storage type 001 (Replen Storage type) that has been configured with putaway strategy as 'F'. It is basically a pick module wherein we have defined one fixed bin for every SKU or Material in WM2 view and we have defined the minimum, maximum, control quantity & replenishment quantity.
Our requirement is to perform a two step confirmation for the stocks going into this pick module meaning although the fixed bin in determined during TO creation user needs flexibility to change the destination bin to a new interim bin during confirmation and then they will intern perform a bin to bin transfer from interim bin into the actual fixed bin location.
We do not want to activate standard 2 step procedure as it will impact other kind of picking process. Hence need a solution to perform destination bin change as below.
1. For Material A and Fixed Bin 001 in storage type 001, the stock level has gone below minimum quantity.
2. A transfer order is created automatically to replenish this bin from another storage type(This is standard SAP replen process).
3. The user will pick stock from the source storage type and deposit the stock into an replenishment interim bin which is also a part of the same pick module.
4. The user wants to confirm stock in interim by changing destination bin to say bin 002 in storage type 001. Although we have activated destination bin change for this storage type it is not allowing us to change bin during confirmation.
We are looking for help from experts to provide a solution for this scenario. Is activating destination bin change for fixed allowed by standard SAP? If not what are the other alternatives to achieve this functionality. Please refer the attached document for details.
Best Regards,
Harish

Hi Harish
How is the replenishment triggered..are you using LP21,LP22 or LP24...IF YOU use any of these standard SAP TCode, first the system creates TR and the bin gets fixed in the TR itself. Even by having destination bin changeable at the time of confirmation will have no effect and will continue to remain grey.
I had a similar requirement in one of the projects.Placement strategy was next empty bin and since fixed bin was maintained in material master , system was always defaulting fixed bin in TR. When TR was converted to TO, the same bin got carried over
to avoid this we used user exit EXIT_RLLNACH4_004 to prevent defaulting of bin in TR. TR was created without destination bin. When TR is converted to TO, system can find the bin based on the strategy maintained. This works very well and we have used it successfully
Regards
Jayaram

Change storage type during putaway

Hi,
I know it is possible to change the destination bin during putaway.
I set it in storage type and it works.
Is it possible to change also the storage type during putaway by SU (LM02) ?
Thank you
Best regards
Andrea

Hi, thank you for your reply.
The TO is just created.
I want to change the storage type during the confirmation of TO via RF using transaction LM02.
Is it possible?
Thanks

WM Putaway (LM03 + Change Bin at confirmation)

Im trying to use standard radio frequency transaction for Putaway by TO (LM03 *) to change the destination bin for a single-step confirmation TO during confirmation, but I only get Selection not possible message. Is there any functional configuration missing? Any SAP Note?
Steps:
- Enter LM03;
- Check Source Information
- Select Source Information
- Check Destination Information
- Choose F7 NBin (new bin)
- Message Selection not possible
*<a href="http://help.sap.com/saphelp_46c/helpdata/en/33/607d5c087b11d3b4ac006094b9b121/frameset.htm">Putaway: Selected by Transfer Order</a>
Thanks in advance.
Best regards,
Raphael

Please do the below settings.
In storage type master data Dst bin ch. during confirm = 1
Warehouse management-Physical Inventory---define types per storage type :in that for that particular storage type un tick all the columns.
Cancel the TO which you have created and once again create the TO, then at the time of confirmation you can edit the destination bin.
Regards
Shakir

Automatic change of Work Center during Confirmation.

Happy New Year to all!
Just want to ask if anyone of you encountered the scenario during confirmation in which the backflushed work center was changed. The user claims that they did not do any changes during confirmation nor did they change manually the order itself. The confirmation happened last December and they only noticed it this month when they were checking the reports.
I did not configure their system so that they can change the Work Center during confirmation. By default, the work center is grayed out during confirmation.
Hope to hear from some of you soon!
Thanks and regards,
jLmendoza
Edited by: John Luis Mendoza on Jan 4, 2011 3:15 AM

Dear
If your production order operations are re-scheuled and dispatched after Capacity Avalaiblity check in cm21/cm22/cm31 etc , then during the dispatch of operation , you have option to change Work Cnetre , time , date based on the selection option in Startgy profile (CM31/CM21-Enter the WORK CENTRE /Order ) and check wether work centre is changed.
One more option may be in Order Change in CO02-Operation Overview -Operation -Work centre -Here user may change the Work Centre .
If you have Order Change management active then you can trace the same .
Refer : Production order change history
Otherwise , there is not such confirguration in SPRO where work centre can be changed automatrically during confirmaiton because it will grade out based on the ste of confirmaiton default screen in OP00.
Hope it clarifies
Regards
JH

Component quantites change during confirmation

Hi ,
We are having make to stock scenario ,components are issued as per bom to production order ,but while confirmation of production order the issue quantities are changed manually ,due to this miss match in inventory quantities occur.
How can we prevent quantity changes during confirmation of production order.
Regards
abhijeet

Dear,
You can use transaction SHD0 to create transaction variantvariant for CO11N and hide Deletion button and make coponent quantity as out put only.
Check this link,
https://www.sdn.sap.com/irj/scn/wiki?path=/display/snippets/transactionVariant-AStepbyStepGuidefor+Creation
Or you can use BADI for this also WORKORDER_GOODSMVT, method GM_SCREEN_OKCODE_CHECK.
Just activate the code:
IF I_OKCODE = 'DELE'.
C_ERROR_FLG = 'X'.
ENDIF.
Regards,
R.Brahmankar

Cannot change destination bin during confirmation

Similar Messages

Maybe you are looking for