Cannot change From when replying

[Originally part of a discussion in the Admin Forum but moved here as looks like a Client specific issue]
Users have full proxy rights to a Workgroup mailbox. When logged in as themselves they can write a NEW mail and change the From field to the Workgroup address. Mail then goes out as if sent from the Workgroup mailbox and has the Workgroup address in the Reply-To field. But when REPLYING to mail that originally came in to the workgroup address it is not possible to change the From field (It doesn't matter whether the incoming is in a shared folder or forwarded to the individual).
I think this was reported in GW2008 as a possible bug, has it still not been resolved or is there a workaround?
Thanks,
Joe

Joe,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Similar Messages

  • Cannot Change From 16 to 8 bits per channel

    I have never had this happen before:  I cannot change the image I am editing from 16 to 8 bits per channel.  Also odd is when I click on an adjustment layer I have created it is not highlighted in blue. 
    Thanks

    See if your in quick mask mode.
    Icon at the bottom of the toolbox and look at the top left of the document window and see if it says quick mask.

  • Cannot change from server core 2012 to gui

    I have tried EVERYTHING (and I mean everything), but I cannot update from a server core 2012 to gui. I get the source error everytime. I have manually downloaded patches, and updated the source, but did not work.  The server is connected to the internet. 
    Really wishing I could just switch to RedHat for this server, but unfortunately the acronis management server doesn't run on redhat (at least with redhat you pay for support, not just the privilege to use their shitty software, so when you have problems you
    can contact them).  Every article or blogs says the samething, but it does not work.

    And the first thing to check for is to ensure that you installed Windows Server 2012 and not Hyper-V Server 2012.  Windows Server you can update.  Hyper-V Server you cannot.
    What are the first few lines of output from systeminfo?
    . : | : . : | : . tim

  • Cannot change from member name to alias description in Smartview

    I am connected to an Essbase datasource using version 11.1.1.3 of Smartview and Excel 2007. I click on the Hyperion tab, the Options button on the ribbon, go to then the Display tab and all of the Member Name Display options window is greyed out. Member name only is selected by default but I cannot change it (because all options are greyed out). I haven't seen this before.
    Note that I am NOT trying to display Member Name AND Alias, I am just trying to change my select from member name TO Alias and cannot (I only have one alias table: Default). I have added the Essbase datasource to my favorites as suggested on another post where numerous users are having the same issue and doesn't make any difference. There is another post regarding this issue that is listed as having a solution but that solution is not the solution to the problem described by everyone in that message thread.

    Member Name Display Options will only be enabled if you connect to a database that has an outline containing duplicate members.
    If your Essbase system permits the use of duplicate member names, you can choose whether to display member names with or without their descriptions or aliases.
    To check if your Outline does allow duplicate members, follow these steps:
    1. Open the outline in edit mode.
    2. Go to the Properties tab.
    3. Go to the"Duplicate member names allowed" node you will see a value of either true or false.
    To see the descriptions in SmartView if you are using duplicate members, follow these steps:
    1. Open Connection Manager.
    2. Connect to your application.
    3. Right click on the link of your application.
    4. Choose "Change Alias table".
    5. Choose the table e.g. "Default".
    6. Click OK.
    HTH-
    Jasmine.

  • Cannot Change Store(When Chaging store, Always Timeout)

    When I change from US to HK, it always timed out(I tried for 4 days!)help please.

    This article seems to help a lot of people with your issue connecting to the Canadian store:
    http://www.info.apple.com/kbnum/n300870
    You also may want to consider disabling any security software that may be running (including firewalls, anti-virus, web acceleration, etc). While rare, it's possible that security software could conflict with access to the Canadian Store and not the USA Store. I would also, if you are connecting to the internet via a router, disconnect it and connect directly via your broadband modem.
    Let me know if any of this helps

  • Cannot change from default printer in Acrobat X by code

    pp.printerName = "\\\\print server\\printer"; works flawlessly in Acrobat 9 Standard but will not change from default printer in Acrobat X Standard unless run in the console. I've checked the printer names through the console and they are listed correctly. Javascript enable menu items is checked. I've even tried creating trusted functions (which still work flawlessly in Acrobat 9, but not in Acrobat X). All other printer settings in Acrobat X change as coded once the printer is changed manually.
    Any suggestions?

    function printFullPEng() {
    var pp = this.getPrintParams();
    var pSize = this.getPageBox("Crop");
    if (pSize[1] > "792") {pp.printerName = "\\\\print-server\\HP Designjet 4000 HPGL2/RTL (Copy 1)";}
    else {pp.printerName = "\\\\print-server\\TOSHIBA 4520C PCL6 - Engineering";};
    pp.NumCopies = 1;
    pp.pageHandling = pp.constants.handling.none;
    fv = pp.constants.flagValues;
    pp.flags = (fv.setPageSize);
    this.print(pp);
    This is tied to a menu button. As I say, it works flawlessly in Acrobat 9, but will not change printers in Acrobat X.

  • I cannot change from grid view to list view when i contol click on the downloads folder on the dock am i doing something wrong? if so how do i change the ?view in the dock

    when i contol click on the downloads icon in the dock i get the gris view . I thought if you control click, you are able to change the view to fan or list. am I doing something wrong.? Icheck to make sure the contol key is working by doing a screenshot and it works there. What am I doing wrong?

    Needs to be a Stack ?

  • ERMS - what controls the default "email from" when replying to an email

    We have multiple emails that go to the same agents that respond to these emails.
    I thought in img t-code CRMC_IC_EMAIL the reply to adddress would be the default but that does not appear to work.
    when the agent does the reply-to email the From is a different email than CRMC_IC_EMAIL.  There is a drop down arrow on the right hand side and the user can change the email from address, but trying to get this to deafult in.
    The emails the agents can choose from are from IMG t-code CRMC_IC_FROMGRP which includes the one from CRMC_IC_EMAIL
    crm 5.0 sp11.

    Don't know if you resolved your email problems but after much playing around I finally got someone at my ISP that knew what he was doing.  If you cannot send, under the smtp server your user name and password must be entered even though the prompt tells you it is optional.  As a mobile device the port used is different from the one I would normally use if at home and therefore validation is required by use of the password.  The normal port for the smtp server is 110 but to use on a mobile unit like the iPad port 587 is used.
    Hope this helps.  It works fine for me now.

  • Change font when replying a HTML messages

    I want to change the font when I reply an e-mail in HTML. The current font is big. A colleague of mine is able to reply using the same font the message was composed with his Android

    The only way to get an answer to this is if you post the URL to page in question.
    Or, you may be able to ascertain which selector you need to style using your browser's Inspect Elements tools.  To bring it up, right Click in Chrome or Firefox.
    Nancy O.

  • Cannot change from System Default Printer

    Using Windows XP (still, I know) and Adobe Reader XI, I am unable to switch from the default printer to another printer in Adobe Reader. I am able to do this in all other applications except Reader.
    I can change the default printer in Windows, open Reader and print to another printer, but the print dialog box doesn't allow me to change the default printer.
    I can select another printer from the drop down box. Then, I'm unable to open the printer settings dialog. If I click print, it sends the job to the default printer instead of the one I've chosen.
    The issue persists for multiple users on this pc even after creating new user profiles in Windows. I have about 10 printers installed on this machine and this happens with all of them. Different makes and models (Brother & Konica Minolta mostly) and also the default Microsoft XPS printer all do the same thing.
    TD;LR: I can only print to the Windows default printer.

    function printFullPEng() {
    var pp = this.getPrintParams();
    var pSize = this.getPageBox("Crop");
    if (pSize[1] > "792") {pp.printerName = "\\\\print-server\\HP Designjet 4000 HPGL2/RTL (Copy 1)";}
    else {pp.printerName = "\\\\print-server\\TOSHIBA 4520C PCL6 - Engineering";};
    pp.NumCopies = 1;
    pp.pageHandling = pp.constants.handling.none;
    fv = pp.constants.flagValues;
    pp.flags = (fv.setPageSize);
    this.print(pp);
    This is tied to a menu button. As I say, it works flawlessly in Acrobat 9, but will not change printers in Acrobat X.

  • Cannot change DPI when exporting a PDF page into a raster image format

    Since I installed the Mac OS X 10.5.6 update, I can no longer change the resolution of the images I'm trying to export (for example, PNG or TIFF files) from PDF documents.
    The resolution is always set to "150 pixels / inch," and even if I change the amount to lower or higher, or change the unit to "pixels / cm," the document is exported in 150 pixels/inch, while the settings set previously in the "Save As" dialogue to export the file have been reverted.
    Is there any workaround?

    Let me guess, the DPI is just some data in the metadata of the file, right? I thought I would get more pixels in the image instead. Let's say, an image at 200x300 pixels at 150 ppi would be 400x600 pixels at 300 ppi, which is what I thought it would do.
    Am I wrong?

  • I'm living in Switzerland, but there is a problem with my adress!!! I cannot change from USA to Switzerland! the indicated phonenumber ist not valid from Switzerland. I would like to book a creative cloub abo!!!!!

    Wie kann ich die Adobe Hotline anrufen??????
    (800)585 0774 ist ungültig für die Schweiz
    Hilfe

    Chat support - For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
    Creative Cloud support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html ( http://adobe.ly/19llvMN )

  • Cannot change to video in iphoto.

    I cannot change from photo to video in my camera programme.
    I use iphone 4S version 7.1
    Maybe it has somethon to with the mystery when I import photos to my computer iphoto.
    The pictures turn around to upside down position.

    Thank you so much!    It works!

  • I cannot change the value in about:newtab from "newtab" to "blank." The dialog is displayed but when I click Ok, the value is not changed.

    I cannot change the value in about:newtab from "newtab" to "blank." The dialog is displayed but when I click Ok, the value is not changed.
    ===Answer===
    Comment on usual method and solution, by a forum Moderator.
    As long as there are no confounding factors, such as certain extensions, or a user.jsfile the procedure is as follows
    # Open a new tab and type "about:config" in the address bar.
    # In the Search bar type: "newtab"
    # Locate and double click "browser.newtab.url"
    # In the "Enter String Value" box change "'''about:newtab'''" to "'''about:blank'''" and click OK.
    # Verify that the value has changed and now all new tabs will be blank.
    See post under by ''pirate048'' [/questions/976589?page=2#answer-509482] ~J99

    Have to say that I rather agree with Mark..all we want is a simple, unadorned clean page that doe not track and show usage!! WHY NOT!! Is it too simple for developers..we aren't all (nor do we want to be!) software experts! Come on Mozilla..tidy up and clean up..it might be a quicker programme too!!

  • I cannot get subtitles on my new smart tv. I've read all the solutions online and none of them work. When I try to airplay the BBC i player by mirroring my iphone 4 the subtitles disappear when I change from iphone to appletv.

    I cannot get subtitles on my new smart tv. I've read all the solutions online and none of them work. When I try to airplay the BBC i player by mirroring my iphone 4 the subtitles disappear when I change from iphone to apple tv.

    That's because the BBC iPlayer app uses basic AirPlay to show the content, this means the original content is sent to the Apple TV for it to decode rather than mirroring the screen of the iPad where the subtitles are added.

Maybe you are looking for