Cannot change Locator Control when defining new Subinventory

Hi,
I'm trying to create a new subinventory, in R12.1.3, and can't change the Locator Control field which is set to Preprecified. The option is grayed out/locked.
In the Inventory organization parameters the Locator Control is set to "determined on subinventory level", but any chage doesn't affect the option in the subinentory.
Can anyone pls explain why?
Thanks.

Hi,
once check the attributes in inv tab of master-item form.
Regards

Similar Messages

I cannot change apple id when the app store asks me to update anything

i cannot change apple id when the app store asks me to update anything

App Store products can only be updated by signing in to the store with the same Apple ID that was originally used to download them. You can't update anything, including your own purchases, as long as there are pending updates linked to the other ID.
If you can't sign in with the other ID, you have to delete all the apps that are linked to it. If you don't know which apps those are, see below.
1. Triple-click anywhere in the line of text below on this page to select it:
kMDItemAppStoreHasReceipt=1
Copy the selected text to the Clipboard by pressing the key combination command-C.
2. In the Finder, press command-F to open a search window, or select
          File ▹ Find
from the menu bar. In the search window, select
          Search: This Mac
from the row of tokens below the toolbar. Below that is a popup menu of search criteria, initially showing Kind. From that menu, select
          Other...
A sheet will drop down. In that sheet, select
          Raw Query
as the criterion, then click OK or press return.
Now there will be a text box to the right of the menu of search criteria. That's where you enter the raw search query. Click in that box and paste the text you copied earlier by pressing command-V.
3. The search window will now show all the App Store products that are installed. Compare those search results with the list of your purchases from the App Store. To see the complete list, you may need to unhide hidden purchases. If any apps were download from the App Store using other Apple ID accounts that you control, sign in to the store under each of those ID's and check the purchases.
4. At least one of the apps in the Spotlight search results is not among your purchases in the App Store. Delete each such item by following the instructions in the Apple Support article linked above.
5. Quit and relaunch the App Store.
If you find these instructions confusing, ask for an alternative method.

Special settings or config needed in controlling when a new plant is create

hi,
what setting we need to do in controlling when a new plant is created.
regards.
shivaji.

Hi
That is dependent of your CO set-up.
Have a look to derivations rulesin CO-PA , PCA and OKB9
perhaps some product costing
regards
Paul

Reg Storage location control when pulled materials via fixed bin replenishm

We are Using Storagelocation Control Functionality in WM
We have below Storage locations
RW01 - Raw Material Storing
PD01 - Materials staged for Production Lines
I have setup RW01 as Standard Storage location and PD01 as 'not copied to TR'
When i try to do bin to bin tranfer raw material to production lines From Bin in RW01 to Bin in PD01, TO has RW01 as expected, i Run posting change background job and this functionality is working fine
We would be using Fixed bin replenishment strategy to stage materials for productions from raw materials storage
I run LP21 for PD01, it has created TR but has storage location PD01 instead of RW01.
PD01 shouldnt have copied as i have set 'Not to be copied to TR' for PD01
Fixed bin replenishment doesnt support storage location control? does we need to go for customization ?
Please help

Please help
Bin to Bin is working fine as per storage location control functionality set-up
We have issue with fixed bin replenishment combined with storage location control
Please share your inputs, Thank you
While debugging we relaixed SAP doesnt check storage location control config at all while doing fixed bin replenishment, only custom solution to force system to check storage location control config and assign storage location is TR?
Edited by: Sasi nagireddy on Jul 18, 2011 8:34 AM

Cannot change default email when using MDM

I use an MDM (AirWatch) to setup Exchange ActivSync email for all my users. It sets up a profile with the user's email. If they have other personal email addresses on the phone, they cannot change the default email to Exchange email that I setup through the MDM. It is not an option in the Settings-Mail/Contacts/Calendars-Default Account field.
The option to change the default account for the default Calendar is there, but not for email.
When I email by clicking on an email address in a website it opens Mail, but the Exchange email is not option.
If I manually setup the Exchange email I can select it as default.
If there are no other personal emails setup the Exchange that is setup from the MDM it will mail from that account.
Any thoughts?

I figured out the issue. The MDM (AirWatch) has a feature of the ActivSync setup called "Prevent use from third party apps"
This stops the Exchange ActivSync email account from being able to be set as the default account Settings-Mail/Contacts/Calendars-Default Account field.
I do not know why they think that the Safari browser built into the phone as a "third party app" but atleast we are working.

Cannot change printer properties when printing PDF files in IE8

Whenever I try to print a PDF file displayed within IE8, I cannot change the printer properties from the print dialogue box. the properties button appears as if it as if it is active because it visually confirma a click; however no properties dialogue box appears. printing html from IE8 works fine.
If I save the PDF to desktop and print from there, I can change properties fine.
Running Win7/64; IE8 (32 bit version). Another PC in the household, also running Win7/64 and IE8/32 does not exhibit this problem.
Printer is Officejet 6500 E709a connected to local workgroup via ethernet cable; I have uninstalled via add remove programs and reinstalled the printer software from the HP CD. It did not help.

I cannot access 'properties' for my hp1536dnf mfp.

I cannot change or control where download files go

When I click a web link to download a file I get an option to run or save the file. So far so good. I do not get an option to tell Firefox whre to save the file even though the option to ask every time is set. I also cannot specify a location to save by clicking save to ..the browse button does nothing.

I have the same problem. I guess these are bugs on Control Center app, and hope Apple sees to this and release updates to fix them soon.

Cant change Picture Position when setting new wallpaper.

I change my background recently and noticed I cantchange the picture position. Meaning I cant make the picture stretch to fit, fill the screen, tile, center, etc. I can change the option in the control panel, but nothing happens.  Its not a huge issue, but Id like to be able to make my wallpaper fit right.

I can offer the following: You might be dealing with a "bug" unless there is something weird about that theme / background image you are trying to install. OR there might be a fix and you need to run Windows Updates... OR your registry might be hosed, in which case you are up a creek without means of locomotion... One of many examples of Posts dealing with similar issues:PROBLEM WITH WINDOWS 7 THEMES, WONT REMEMBER SLIDESHOW, CREATES NEW THEMES BY ITSELF People have been complaining for a long time that -- for whatever reason -- the Operating System will sometimes not cooperate when trying to save / display / deal with Themes. I have not seen this happen - ever - and I have been using Windows since - well, a long time ago. So, what? It means it did not happen to me and yet it did happen to lots of other people.  You might try the following: Windows 7 does come with a few standard built-in themes of its own; you might try one of the standard Windows 7 themes and see if at least one of the Standard Themes work as they should. Right-Click on your Desktop > Personalize > Select from Windows Default themes  Why do this? It is a good "first test" because Windows 7 Themes Work with Windows 7 Operating System. Next, go out to a trusted source on the Internet, download and install a wall paper that is made for your monitor's Display type. For example, you can go to Hubble Space Images Wallpaper Install one of these images -- see if that works. Why do this? It is a good "second test" because these images are made to work -- and should work, assuming the system is going to accept "wallpaper" at all and is not tied up in some weird "bug state".  What if the tests succeed? Your Image may be a poor choice for wall paper. What if the tests fail? Might be bug / registry error / File System error. What to do? Whatever you like -- Back up the entire system and reinstall Windows comes to mind.  The problem with this kind of problem that doesn't happen to everyone is that there is not a good fix unless you can find a "fix" for it at Microsoft (Windows Updates usually provides patches for most people). Another Expert might have more to offer.  When you see a Post that helps you,Inspires you, provides fresh insight,Or teaches you something new,Click the "Thumbs Up" on that Post. Click my Answer Accept as Solution to help others find Solutions and Answers!

Cannot change location with my iPod Touch - always Brussels!

I live in Belgium and set my iPod Touch for Brussels time zone. Great, but yesterday I arrived in JAPAN and even though I try to set the general "Date and Time" for Tokyo, the clocks all show the time for Bruxelles-- that is when I look at international time clocks, it shows the time I've set for TOKYO as the time for Bruxelles (Brussels) -- so when I set the time for 3pm in Tokyo then look at the international clock it says TOKYO is 8 hours later, 11:00 pm -- i.e. iPod Touch thinks I'm still in Brussels--
---when I go back to General settings time and date, yup, it is back to Brussels--
I even did a reset (not total, just basic settings) and NO CHANGE I can't get the iTouch to set the current date and time for TOKYO.
Why not? Is the January program download causing a problem? I wouldn't think so, but...
(I have been using the new programs since the day they were offered)
Any comments appreciated-- I travel lots and love the international clocks-- but I need them to be correct! Can't be a Brussels only iTouch!
Thanks, Steve Tuesday 12 February 2008 (Tokyo)!

I live in Belgium and set my iPod Touch for Brussels time zone. Great, but yesterday I arrived in JAPAN and even though I try to set the general "Date and Time" for Tokyo, the clocks all show the time for Bruxelles-- that is when I look at international time clocks, it shows the time I've set for TOKYO as the time for Bruxelles (Brussels) -- so when I set the time for 3pm in Tokyo then look at the international clock it says TOKYO is 8 hours later, 11:00 pm -- i.e. iPod Touch thinks I'm still in Brussels--
when I go back to General settings time and date, yup, *it is back to Brussels*
I even did a reset (not total, just basic settings) and NO CHANGE I can't get the iTouch to set the current date and time for TOKYO.
Why not? Is the January program download causing a problem? I wouldn't think so, but...
(I have been using the new programs since the day they were offered)
Any comments appreciated-- I travel lots and love the international clocks-- but I need them to be correct! Can't be a Brussels only iTouch!
OK I solved this by using iTunes with my Mac to update the iTouch-- but what if I don't have my MAC on a trip? How to update the iPod and get the new destination to STICK?
Regards,
Steve
Tuesday 12 February 2008

FF 33.0 - I cannot remove avg isearch when open new tab.

I have FF 33.0 installed and have a persistent problem with AVG isearch. I have tried all the help/forums but none have worked.
I have removed Google (via Manage Search Engines) and then click on Restore Defaults, close FF and restart, but AVG isearch re-appears when I open a new tab.
I do not have AVG installed (Windows 8) and isearch or AVG is not listed within Control Panel.
I am my wits end.
I have read that registry settings might be involved and/or also there is a "ghost" FF environment (kept when upgrading FF) that might be the source of the problem.

As requested, my troubleshooting information:
Application Basics
Name: Firefox
Version: 33.0
User Agent: Mozilla/5.0 (Windows NT 6.2; WOW64; rv:33.0) Gecko/20100101 Firefox/33.0
Multiprocess Windows: 0/1
Crash Reports for the Last 3 Days
All Crash Reports
Extensions
Name: Copernic Desktop Search - Search Firefox content
Version: 3.7.0.8
Enabled: true
ID: {57319509-7821-41B0-9FDF-3B58F146AE33}
Name: McAfee Security Scan Plus
Version: 1.0
Enabled: false
ID: {e4f94d1e-2f53-401e-8885-681602c0ddd8}
Name: Skype Click to Call
Version: 7.3.16540.9015
Enabled: false
ID: {82AF8DCA-6DE9-405D-BD5E-43525BDAD38A}
Graphics
Adapter Description: AMD Radeon HD 7700 Series
Adapter Drivers: aticfx64 aticfx64 aticfx64 aticfx32 aticfx32 aticfx32 atiumd64 atidxx64 atidxx64 atiumdag atidxx32 atidxx32 atiumdva atiumd6a atitmm64
Adapter RAM: 1024
ClearType Parameters: Gamma: 2200 Pixel Structure: R ClearType Level: 100 Enhanced Contrast: 400
Device ID: 0x683d
Direct2D Enabled: true
DirectWrite Enabled: true (6.2.9200.16581)
Driver Date: 3-28-2013
Driver Version: 12.104.0.0
GPU #2 Active: false
GPU Accelerated Windows: 1/1 Direct3D 11 (OMTC)
Vendor ID: 0x1002
WebGL Renderer: Google Inc. -- ANGLE (AMD Radeon HD 7700 Series Direct3D9Ex vs_3_0 ps_3_0)
windowLayerManagerRemote: true
AzureCanvasBackend: direct2d
AzureContentBackend: direct2d
AzureFallbackCanvasBackend: cairo
AzureSkiaAccelerated: 0
Important Modified Preferences
accessibility.typeaheadfind.flashBar: 0
browser.cache.disk.capacity: 358400
browser.cache.disk.smart_size.first_run: false
browser.cache.disk.smart_size.use_old_max: false
browser.cache.frecency_experiment: 3
browser.places.smartBookmarksVersion: 7
browser.sessionstore.upgradeBackup.latestBuildID: 20141011015303
browser.startup.homepage_override.buildID: 20141011015303
browser.startup.homepage_override.mstone: 33.0
dom.mozApps.used: true
extensions.lastAppVersion: 33.0
gfx.direct3d.last_used_feature_level_idx: 0
media.gmp-gmpopenh264.lastUpdate: 1413757004
media.gmp-gmpopenh264.version: 1.1
media.gmp-manager.lastCheck: 1413969766
network.cookie.prefsMigrated: true
places.database.lastMaintenance: 1414056584
places.history.expiration.transient_current_max_pages: 104858
plugin.disable_full_page_plugin_for_types: application/pdf
plugin.importedState: true
privacy.sanitize.migrateFx3Prefs: true
storage.vacuum.last.index: 1
storage.vacuum.last.places.sqlite: 1413757479
Important Locked Preferences
JavaScript
Incremental GC: true
Accessibility
Activated: false
Prevent Accessibility: 0
Library Versions
NSPR
Expected minimum version: 4.10.7
Version in use: 4.10.7
NSS
Expected minimum version: 3.17.1 Basic ECC
Version in use: 3.17.1 Basic ECC
NSSSMIME
Expected minimum version: 3.17.1 Basic ECC
Version in use: 3.17.1 Basic ECC
NSSSSL
Expected minimum version: 3.17.1 Basic ECC
Version in use: 3.17.1 Basic ECC
NSSUTIL
Expected minimum version: 3.17.1
Version in use: 3.17.1
Experimental Features
---------------------

Change Blank Page when opening New Tab

Is there anyway in Safari 3 to change the blank page that opens when starting a new tab? Anyway to change it to Google or any page you like?

I don't believe this is possible, but even if it were, setting it to Google would be pointless, since you can already do a Google search from the browser search bar.
You can suggest this as a feature to Apple if you like here: Mac OS X Feedback
Mulder

Change default name when adding new e-mail account

When I try to add a new e-mail account in MacMail, the populated default name for the user is incorrect. I have to change it to my name and was wondering where this is coming from and how to remove it.

Did this ever get answered somewhere? I would like to change mine also.

Cannot change year to 2010 for new events

The calendar shows the current year 2010, but when I enter a new event the year is 2009 and it is not editable. Also when I enter a birthday in my address book the birth year shows up as 2000 and cannot edit it.

Pratrap, could you gently tell us which PS 2010 version are you using? This is going to help us on solving you issue.
Cheers.

HT6338 8.0.2 Cannot change location services

Just did 8.0.2 for iPhone 5. Chose not to allow location services during initial setup. Now it is greyed out under privacy settings. Reset did not work either. How can I fix this? Or is it 8.0.2 bug?
i have already tried installing a new app to prompt phone to ask me to change settings this did not work.
Under restrictions, I have it set to allow changes to location services

There is No Risk to Reset All Settings ...You just have to remember how you want your Settings on each App for things like Location Services and other Choices. Again, No Risk.

Cannot change font size when highlighted. All font changes. How do I correct this?

Frustrated as to why when I highlight a single word to change font size or style every word on the page follows the adjustment. I need to be able to change words individually with font, size and color.

I have stopped using Text Edit as I find it flaky. Instead I prefer Bean:
http://www.bean-osx.com/Bean.html
which does not have that problem!

Cannot change Locator Control when defining new Subinventory

Similar Messages

Maybe you are looking for