Cannot change numerous History settings in Privacy tab (is Norton 360 and/or Avast causing this problem?)

I have Norton 360 and Avast Internet Security 2014.
I AM able to change most Firefox settings.
I am NOT able to change numerous Privacy settings (mainly History and Use custom settings for history, including all subsettings). When I change certain Privacy/History settings, the browser tells me it must close and restart to disable this existing setting. When I open the Privacy tab after browser restart, I see that the change(s) I made did NOT take effect.
I have two enabled firewalls, managed by Norton and Avast, respectively (the Windows 7 OS firewall is disabled, probably because of the third-party management by Norton and Avast).
***What, specifically, is causing this problem (being unable to change some important Privacy/History settings), and what can I do to regain the ability to make any and all Privacy setting changes whenever I want to?
Thanks.

Speaking of avast!, you may want to disable the avast! Online Security extension. A variety of odd problems have been reported with it. You can do that on the Add-ons page. Either:
* Ctrl+Shift+a
* orange Firefox button (or Tools menu) > Add-ons
In the left column, click Extensions.

Similar Messages

In iPhoto '11 I cannot change the book settings. For example, adding page numbers. There is no "option" button as is suggested by the help item.

In iPhoto '11 I cannot change the book settings. For example, adding page numbers. There is no "option" button as is suggested by the help item. How can I change to book settings?

The "options" button should appear at the bottom of the iPhoto window, when you view your book, then the Book Settings Button should be available and you can activate page numbers.
But remember, that the settings available will depend on the Book Theme you selected. The above shows the settings for one of the "Travel" themes. In a Picture Book Theme, e.g. you cannot add page numbers.
What theme and book size are you using?
Regards
Léonie

Dynamic Calc processor cannot lock more than [100] ESM blocks during the calculation, please increase CalcLockBlock setting and then retry(a small data cache setting could also cause this problem, please check the data cache size setting).

Hi,
Our Environment is Essbase 11.1.2.2 and working on Essbase EAS and Shared Services components.One of our user tried to run the Cal Script of one Application and faced this error.
Dynamic Calc processor cannot lock more than [100] ESM blocks during the calculation, please increase CalcLockBlock setting and then retry(a small data cache setting could also cause this problem, please check the data cache size setting).
I have done some Google and found that we need to add something in Essbase.cfg file like below.
1012704 Dynamic Calc processor cannot lock more than number ESM blocks during the calculation, please increase CalcLockBlock setting and then retry (a small data cache setting could also cause this problem, please check the data cache size setting).
Possible Problems
Analytic Services could not lock enough blocks to perform the calculation.
Possible Solutions
Increase the number of blocks that Analytic Services can allocate for a calculation:
Set the maximum number of blocks that Analytic Services can allocate to at least 500.
If you do not have an $ARBORPATH/bin/essbase.cfg file on the server computer, create one using a text editor.
In the essbase.cfg file on the server computer, set CALCLOCKBLOCKHIGH to 500.
Stop and restart Analytic Server.
Add the SET LOCKBLOCK HIGH command to the beginning of the calculation script.
Set the data cache large enough to hold all the blocks specified in the CALCLOCKBLOCKHIGH setting.
Determine the block size.
Set the data catche size.
Actually in our Server Config file(essbase.cfg) we dont have below data added.
CalcLockBlockHigh 2000
CalcLockBlockDefault 200
CalcLockBlocklow 50
So my doubt is if we edit the Essbase.cfg file and add the above settings and restart the services will it work? and if so why should we change the Server config file if the problem is with one application Cal Script. Please guide me how to proceed.
Regards,
Naveen

Your calculation needs to hold more blocks in memory than your current set up allows.
From the docs (quoting so I don't have to write it, not to be a smarta***:
CALCLOCKBLOCK specifies the number of blocks that can be fixed at each level of the SET LOCKBLOCK HIGH | DEFAULT | LOW calculation script command.
When a block is calculated, Essbase fixes (gets addressability to) the block along with the blocks containing its children. Essbase calculates the block and then releases it along with the blocks containing its children. By default, Essbase allows up to 100 blocks to be fixed concurrently when calculating a block. This is sufficient for most database calculations. However, you may want to set a number higher than 100 if you are consolidating very large numbers of children in a formula calculation. This ensures that Essbase can fix all the required blocks when calculating a data block and that performance will not be impaired.
Example
If the essbase.cfg file contains the following settings:
CALCLOCKBLOCKHIGH 500 CALCLOCKBLOCKDEFAULT 200 CALCLOCKBLOCKLOW 50
then you can use the following SET LOCKBLOCK setting commands in a calculation script:
SET LOCKBLOCK HIGH;
means that Essbase can fix up to 500 data blocks when calculating one block.
Support doc is saying to change your config file so those settings can be made available for any calc script to use.
On a side note, if this was working previously and now isn't then it is worth investigating if this is simply due to standard growth or a recent change that has made an unexpected significant impact.

TS3276 I have no sound on my MacBook Air for sending and receiving messages. All sound settings have been checked and are OK. This problem has arisen many times and is intermittent in the sense that the sound returns and disappears for no apparent reason.

I have no sound on my MacBook Air for sending and receiving messages. All sound settings have been checked and are OK. This problem has arisen many times and is intermittent in the sense that the sound returns and disappears for no apparent reason.

Open System Preferences > Sound > Sound Effects
Select: Play user interface sound effects
And make sure the Mute box is not selected.
Now open Mail. From the Mail menu bar clik Mail > Preferences then select the General tab.
Make a selection from the: New messages sound pop up menu.

I can't view multiple images in tabbed panels in photoshop CC (do not have this problem in PS5 or 6)

I can't set up multiple images in tabbed panels in photoshop CC (do not have this problem in PS5 or 6). Has anyone had this problem with CC and if so do they know the fix?

I just discovered something really weird. If I open the images in
photoshop (and the tabs are not showing) and then open another window on
top of photoshop (for example word or safari) , then the images and tabs
show in the photoshop window. But if I move Pshop to the front screen then
the tabs disappear!

I cannot connect my ipad with the program of yamaha stagemix, is urgent that they solve this problem to me, buys ipad esfecificamente to use that application

I cannot connect my ipad with the program of yamaha stagemix, is urgent that they solve this problem to me, buys ipad esfecificamente to use that application, has somebody been able it to solve?

I cannot connect my ipad with the program of yamaha stagemix, is urgent that they solve this problem to me, buys ipad esfecificamente to use that application, has somebody been able it to solve?

I send out emails with proper grammar. People would reply returning my email and I would notice the grammar has changed and doesn't make sense. What's causing this problem?

I send out emails with proper grammar. People would reply returning my email and I would notice the grammar has changed and doesn't make sense. What's causing this problem?

Have you actually compared what you sent (in your Sent Mail Folder) with what is in the reply?
Note that Auto Correction can often change what you think that you are typing.
Are you sure that the return message has your original message intact and not edited by the recipient?
Bottom line: if the recipient does a simple reply to your message with the original message attached the system is not going to edit your message.

I cannot control the sensor on my Mac, it moves by itself, and opens different pages. What can cause this problem? please help me.

I cannot control the sensor on my Mac, it moves by itself, and opens different pages. What can cause this problem? please help me.

There are several possible causes for this issue. Take each of the following steps until it's resolved.
1. Follow the instructions in this support article.
2. Reset the System Management Controller.
3. If you're using a Bluetooth trackpad, investigate potential sources of interference, including USB 3 devices.
4. A swollen battery in a MacBook Pro or Air can impinge on the trackpad from below and cause erratic behavior. If you have trouble clicking the trackpad, this is likely the reason. The battery must be replaced.
5. There's a report that a (possibly defective) Thunderbolt Ethernet adapter can cause the built in trackpad of a MacBook to behave erratically. If you're using such an adapter, disconnect it and test.
6. There's also a report of erratic cursor movements caused by an external display that was connected but not turned on.
7. If none of the above applies, or if you have good reason to think your computer is being controlled remotely, remove it from the network by turning off Wi-Fi, disconnecting from a Bluetooth network link, and unplugging the Ethernet cable or USB modem, whichever is applicable. If the cursor movements stop immediately, you should suspect an intrusion.

Firefox keeps randomly changing Clear History settings to also clear Saved Passwords.

I have "Clear history when Firefox closes" selected but the "Saved Passwords" option is unchecked.
After a couple of days the "Saved Passwords" option becomes automatically selected. I am certain that nobody is manually changing these settings but the change happens nevertheless.
This breaks my Sync and it drives me crazy. Any ideas how to fix this problem?

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
If you do not keep changes after a restart or otherwise have problems with preferences, see:
*http://kb.mozillazine.org/Preferences_not_saved

Cannot change numeric min max property

Hello everybody,
By right clicking on a numeric control I cannot change the minimum and maximum range. (it is always returning to 0 after typing 25 for example at the maximum value, the numeric is UINT16).
This is happening on every vi in my project, even if I create a new empty one.
BUT, it is not happening when I close labview, re open labview and open an empty vi (not in the project). This way, I can change the maximim property of a numeric, as usual.
Is there a project property that forbid to change numeric property, in all vi in the project ?
I am missing something ?
Thanks for your help.
ps : I use labview 8.6.
Solved!
Go to Solution.

I made additionnal tests.
If I put a new numeric1 DBL on the FP on a vi in my project, I can change the max property to 5.1 for example.
If I put a new numeric2 DBL on the FP, and I change the max property to 6.1, the max property 6.1 is automatically set also on numeric1.
If I put a new numeric3 UINT on the FP, the default value to max property is also 6.1, that is strange for a UINT.
It seems that what is happening is dependant of what is the first numeric I put in the FP.
The beahaviour I was previously describing what because I first put a command in the FP that was a typedef of a cluster containing different numerics.
I really don't understand what is happening, because I rthink it is not the first time I use min max property, and I never had such a problem as far as I remember.
Thanks for your help.

Cannot Change Custom Import Settings For AAC's

Last night I changed the custom import settings from 192 kbps to 160 kbps for a particular mp3 album I wanted to convert with that bitrate. I tried to change the custom settings back to 192 kbps (the bitrate most of my mp3's & wma's are in). For some reason, the window that came up many times before refuses to pop up now. I tried the custom settings for mp3's and that window still pops up. Anyway, I tried a repair and nothing happened. I uninstalled iTunes, Quicktime, Bonjour, and Apple Software Updates, deleted there corresponding folders in C:/Program Files and then restarted the computer. I downloaded the iTunes 9 installer through the iTunes website and proceeded to reinstall iTunes. Still, the problem exists. I'm not sure what else to do? The only other thing I can think of is to do the same except install iTunes 8 instead and then search for updates and reinstall iTunes 9 that way. Would anyone know of any other method on solving my problem? Any help would be greatly appreciated, thanks!

glenn,
I have the same problem and it is driving me crazy. If you find a solution please email me at [email protected]
thanks and good luck

Im using Windows 7 Ultimate, Cannot Change Windows Update Settings

Im using Windows 7 Ultimate, and I've been encountering difficulties in Windows Updates Settings. I want to change my settings on Windows Updates so I can install important software from the Internet. But the problem is it prompts this message "SOME SETTINGS
ARE MANAGED BY YOUR SYSTEM ADMINISTRATOR" as well as "NEVER CHECK FOR UPDATES(NOT RECOMMENDED). Please help me to fix this problem... It is really important to me... I hope you can resolve this technical issue.. Thanks!!!

Hi,
Before going any further, I would like to verify if your pc is in a domain.
If your computer is part of a domain, this feature may be disable via GPO by your system administrator. You may need to contact it with your IT department.
If it is not in a domain but the issue appears, please make sure you are logging on with system administrator account. In addition, if any security program
is installed, please temporarily disable it.
Meanwhile, please check the GPO settings on your PC:
1. Click Start, type “gpedit.msc” and press enter.
2. Navigate to Computer Configuration-> Administrative Templates ->
Windows Component -> Windows Update. Make sure the states of all setting are Not Configured.
3. Navigate to Computer Configuration-> Administrative Templates->
System-> Internet Communication Management-> Internet Communication settings. Make sure the state of “Turn off access to all Windows Update features” is Not Configured.
Hope it helps.
Regards,
Leo Huang
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
This was really helpful. Thanks a lot.
Hello:
I have win7 Professional, have same problem as in this link. I have made those change as mentioned. But, still my computer's windows update setting is not allowing me to change. It is grayed out, and set at "Check for updates but let me choose whether
to download and install them".
I am its administrator, it is in a workgroup, but it was put in by 'Best Buy Geeks'. I am able to use gpedit.msc, regedit, and also can run cmd as administrator.
I want to change it. Any suggestion, please!

Hi, i have a problem with my credit card so want to use a card from another country but cannot change my country settings

hi, i have a problem with my credit card so want to use a card froma different country but cannot change my country settings

Hi balalbas,
If you are having issues changing the country associated with your iTunes Store account, you may find the following article helpful:
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/ht1311
Regards,
- Brenden

Cannot change compound clip settings from 1080P 60fps to 1080i 25fps

Hi. I created a compound clip, which for some reason ended up with settings of 1080P 60fps (probably because I added a music track first before any video and just used the automatic settings). After editing a whole sequence and exporting a master file, I realized the settings had been wrong. All my footage is 1080i 25fps.
Only thing is when I tried to change the compound clip settings, I only had other progressive options available. I could not change it to 1080i.
I had to create a brand new Compound Clip with 1080i 25 and paste the clips from the original CC into the new CC. Only thing was a music track was now out of sync with the video (presumably because the fps value in the original CC did not match the footage). I had to retime the audio track to around 99% speed to fit to the video clips again!
Why could I not change the CC settings directly?
Thanks

The compound clip is acting like a project. You can never change the timebase of project once there's media in it. You should copy and paste into a new compound clip if you can.

I have recently given away my old mac air to a friend. I want to change the mail settings so he can access his emails and not access mine

I recently gave my old mac air (purchased new 2011) to my friend. I want to change the mail settings so that he can access his mail from the application and not mine. So far we have gone to mail then preferences then general and changed the email address to his but upon relaunching the mail application, it didn't seem to have worked. The mailbox was empty of either his or my emails. Ali

Follow these instructions: What to do before selling or giving away your Mac.
Your friend will need to install his own OS X system as weill as purchase his own App Store software. He/She cannot use yours. Since the machine has been wiped your friend can configure his/her own Mail account.

Cannot change numerous History settings in Privacy tab (is Norton 360 and/or Avast causing this problem?)

Similar Messages

Maybe you are looking for