Cannot change paper size

I'm using CS6 on a MacBook with Yosemite (10.10.1) and an Epson R2880 a3 printer.  However, when trying to print anything from Photoshop (CS6) I do not appear to have the facility to change the paper size, meaning I'm stuck with A4 only.  Any ideas how to resolve?  I downloaded he latest driver from the Epson (UK) website but no difference.
When checking in Word the facility is there for me to print various different sizes.
Any thoughts / suggestions gratefully received

Thanks a lot. Although i find it strange that every application sets this up individually. However, I did this in all Applications that I use for printing, now it works just fine.

Similar Messages

  • HP M1522NF Twain is Unavailable in Preconfigured Scan Settings. Cannot change paper size.

    Adobe X Pro
    Windows 7 64
    Hp LaserJet M1522NF
    Only WIA driver is available in the preconfigured scan settings. I looked at the Hp LaserJet M1522 documentation, and it says:
    TWAIN compatibility
    TWAIN-compliant programs can scan documents directly from the product. Programs that follow the TWAIN standards should work because HP LaserJet products support the required core functions for TWAIN version 1.9 compliance. However, these programs have only limited support for extended TWAIN options, and software that requires full support, such as Adobe and Core, might not function as expected.
    For programs that are not TWAIN-compliant, use the following steps as a workaround:
    Use the HP LaserJet Scan software to scan the document into a folder in .TIFF format (or any other file type that the software supports). 
    Import the .TIFF file into the program.
    This is a pretty cumbersome work around. Are there any plans for Acrobat X to fully support extended TWAIN options? Is there an an easier work around?

    Adobe X Pro
    Windows 7 64
    Hp LaserJet M1522NF
    Only WIA driver is available in the preconfigured scan settings. I looked at the Hp LaserJet M1522 documentation, and it says:
    TWAIN compatibility
    TWAIN-compliant programs can scan documents directly from the product. Programs that follow the TWAIN standards should work because HP LaserJet products support the required core functions for TWAIN version 1.9 compliance. However, these programs have only limited support for extended TWAIN options, and software that requires full support, such as Adobe and Core, might not function as expected.
    For programs that are not TWAIN-compliant, use the following steps as a workaround:
    Use the HP LaserJet Scan software to scan the document into a folder in .TIFF format (or any other file type that the software supports). 
    Import the .TIFF file into the program.
    This is a pretty cumbersome work around. Are there any plans for Acrobat X to fully support extended TWAIN options? Is there an an easier work around?

  • Excel 2010 bug -- cannot place controls on chart properly after changing paper size

    I have encountered unexpected behavior in Excel 2010 when placing controls on a chart that is a separate sheet. The issue is that the controls (e.g. spinner, scroll bar, etc.) cannot be placed or moved to the right side or the bottom.
    Steps to reproduce:
    1) create a chart as a separate sheet
    2) change the paper size to, for example, A6 (4.13" x 5.83")
    3) change paper size back to Letter (8.5" x 11")
    4) controls cannot be placed on right side or bottom of chart.
    It appears that instead of using the current dimensions of the chart paper size to determine where controls may be placed, the smallest dimensions that have ever been applied to the chart are used.
    I am looking for a workaround for this issue since I would like to use a paper size large than 8.5" x 11", but I cannot place controls on such a chart properly at this time.
    Any ideas?

    I have found a workaround for this issue:
    1) change paper size in your default printer's preferences to the paper size you want in Excel.
    2) afterwards insert or create the chart. It is automatically the correct paper size, and controls can be placed or moved properly.
    3) change default printer paper size back.
    In case your chart has already been created, simply copy the existing chart in step 2 instead of inserting/creating.
    Aidan
    Edit: credit to http://webdesignerpark.blogspot.com/2013/02/paper-size-to-set-your-default-paper.htmlfor the idea on changing default paper size.

  • Can't change paper size in Print module

    When I click on Page Setting in the Print module I get a pull-down menu that has options for Printer, Presets, Layout, Pages per Sheet, Layout Direction, Border, and Two Sides but there is no option available for changing paper size. This was not a problem before I updated to 1.2. How do I get that option back? Thanks.

    Have you downloaded and installed the latest Driver for the Epson R1800.
    It has been said that it is best, even if you have a ppc to download the latest IntelMac Driver to install for that printer, for best results.
    Don
    Don Ricklin, MacBook 1.83Ghz Duo 2 Core running 10.4.10 & Win XP, Pentax *ist D
    http://donricklin.blogspot.com/

  • Change paper size before selecting print preview

    I want to change Paper Size prior to selecting Print Preview. That is not possible in Firefox. Can Paper Size options be added to Page Setup and/or Print Preview? Please fix.

    You might be able to set that thru your Printer Preferences, so look there from within Firefox first. {Ctrl + P} then hit the Properties button, on the Paper Tab you should be able to set the Paper Size.
    If not, give this a try:
    type about:config in the URL bar and hit Enter
    Pref Name = print.printer_your_printer_name.print_paper_height - 11.00
    and print.printer_your_printer_name.print_paper_width - 8.50
    Is that what you see? If you see those "Letter" measurements, try re-setting the main pref, and let Firefox reacquire the info from your OS.
    in about:config
    Preference name = print.print_printer
    Right-Click and select Reset, then restart Firefox.

  • Change paper size when printing

    How to change paper size when printing pdf? No option for paper size appear.

    That is a feature of AirPrint. If you do a Google search on "AirPrint paper size" you'll find documentation from major printer manufacturers. For example, this is copied from some HP documentation:
    What paper and media sizes are supported? 
    With AirPrint, paper and photo media sizes are automatically selected depending on the application you are using on your Apple device, your HP ePrint printer, and the region in which you are using AirPrint. You do not have the option to select different paper sizes.
    For example, from Apple’s Photo application, if the HP ePrint printer has a separate photo paper tray, AirPrint uses 4 x 6 inch photo media as the default paper size. If the printer does not have a separate photo paper tray, AirPrint uses letter-size paper. If you are printing from Apple’s Safaribrowser, letter-size paper is the default paper size in the US region, and A4 is the default paper size in Europe.
    AirPrint supports the following paper and media sizes:
    Letter
    Legal
    A4
    4 x 6 in photo paper
    A6 photo paper

  • My canon 9000 mk 2 is producing different colors when I change paper sizes.

    When I change paper sizes on my Canon 9000 mark II, I have been getting odd colors on some size paper settings.Paper type and other settings are the same.I did try to download new driver when this started to occur. However, I deleted the new driver and reinstalled the old print driver. The problem has not gone away.

    The printer only does what it is told.  Barring a malfunction, that is.  So, I would look else where.  Your photo editor?
    EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
    EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
    Photoshop CS6, ACR 9, Lightroom 6

  • Changing Paper size does not change page break?

    I am using Oracle Report R6i.
    I have created a matrix report showing months horizontally and items vertically. By default, the report displays a vertical line (Page Break Line) at 8 inches (as shown in Ruler).
    I change the paper size in Page Setup Menu but still the page break line displaying at 8 inches due to which only 03 months are displaying per page at Landscape mode. My page size is : 210x230 cm.
    How can I extend that page break line so that atleast 6 months to be displayed per page.
    Regards,
    Luqman

    Changing the size used by the printer with the page setup dialog does not affect how Reports formats the output. You need to change Reports page size for this.
    In 6i, the page size for Reports is controlled by properties against the Section objects (header, main, trailer) in the navigator.
    In 2.5 you would set the vertical and horizontal page size in the Reports property palette for all sections. With the introduction of individual sections in 6i, each section can have it's own page size.
    In your example you probably want to change the page size against the "main section" to 13" x 8.26" to get the report to format in Landscape. Also remember to set the ORIENTATION parameter or property to "Landscape" so that the printer is set to Landscape as well.

  • Cannot change page size with acrobat

    I am able to convert my manuscript in Mac word(2011) to adobe acrobat (XI); unfortunately the 6 X 9 " page size does not convert. I spent a few hours on the phone with adobe support and the final resolution was to upload the file to them and they converted it for me. however, they used distiller which reduced the file size and appears to have affected the many images. Does anyone have any advice? The best I have been able to glean online is work with inDesign to change page size.

    Thanks.
    The problem was with the paper size. In addition to change the page size I needed to change the paper size in the print option before selecting save Adobe PDF.
    From Word go to File> Print
    Open the Copies & Pages dropdown
    Select Paper Handling
    Check the Scale to fit paper size box
    Open the Destination Paper Size list
    Select your custom 6x9 Preset
    Click the PDF button
    Select either Save as PDF or Save as Adobe PDF
    The unfortunate thing is that I was able to do this initially, but when I went back to replicate it adobe is creating 2 files one with my cover page and the rest to the manuscript. Luckily my initial copy was good. Thanks again for your help.

  • Cannot change column size in iPod Classic

    I received my Classic today and transferred over all my music. After making changes to various things, I tried to adjust the size of the columns. I cannot.
    I was able to delete a column, then re-add it then change the size. In my 5th Gen Video ipod I could just but the cursor on the right side of the column and click, it would adjust to the size of the largest, Name, Artist, Album etc. I am able to change column sizes in itunes, just not the ipod.
    I've looked through threads to find something that resembles my problem but most seem to be with itunes and not the ipod. Both computers I use are updated to 7.4.1
    I was wondering if I restore the factory settings would I be able to change the column sizes without having to delete and re-add them? Or is this another new lovely and VERY annoying update to itunes/ipod?
    Thanks.

    I can confirm that it's not (specifically) your iPod and it's not your OS. I'm running the newest iTunes through Mac OS 10.3.9 with a 3G iPod and just made a playlist with the same problems. NONE OF MY OTHER PLAYLISTS are affected - the columns there adjust just fine, but any NEW playlists I generate on my iPod will not allow me to individually adjust columns. Right-clicking on a column header does not even allow me to "Auto Size Column", but only to affect ALL the columns, or choose a column to add or remove.
    Interestingly enough - new playlists I generate in iTunes (not on the iPod) work normally. However, it isn't feasible for my 10GB hard drive to automatically sync with my 15GB iPod, so I can't test and see if dragging a playlist to the iPod will generate one with alterable columns.
    My opinion is that this is in some way related to the 7.4 or 7.4.1 update. I believe I last generated a playlist before the 7.4 update, and had no problems.

  • Change paper size created by Quartz PDFContext

    I bought a new printer and now I can't print my faxes. It doesn't matter if I use pagesender or the internal fax of OSX to receive. When opening the fax in Acrobat Reader, Acrobat Pro or preview, the size is 215,2 x 290,8mm and created by Mac OS X 10.6.4. Quartz PDFContext. All paper-settings in the preferences->printers-> are set to A4. The old printer ignored the paper-size, the new one displays that I have to feed a legal format paper. How can I change the legal format to the A4 size of the PDFs created by Quartz PDFContext?

    You probably want to post this question in the Oracle Reports forum Products | Developer Suite | Reports. The folks over there may well have some ideas to help you.
    Justin
    Distributed Database Consulting, Inc.
    http://www.ddbcinc.com/askDDBC

  • I click on layouts and still cannot change book size

    I'm trying to change the size of the ibook before I buy it. I've tried several options buy cannot figure it out. Any help would be appreciated. 

    duplicate the book for safety and then click on themesand select teh same theme with a new size
    LN

  • HT201279 Cannot change font size

    Am having trouble changing my font size when printing some emails and attachments . So small i cannot read .When I do change the size it changes back when I start to print . Anyone have the same problem .

    I have stopped using Text Edit as I find it flaky. Instead I prefer Bean:
    http://www.bean-osx.com/Bean.html
    which does not have that problem!

  • Cannot change image size dimensions

    the program will NOT let me enter values  or change dimension values, can anyone help?

    Did you check the "Resize" box?
    We really don't know what application you are referencing, what platform you are on, Mac or Windows, nothing about your setup, nothing, nothing, nothing…
    Due to the current unavailability of clairvoyants and mind-readers in the forum, we respectfully request you supply sensible, complete details, wicked brent.
    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user nor a subscriber to CC etc.).
    a screen shot of your settings or of the image could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Cannot set paper size

    I want to print photos and try to set the paper size to 4 x 6 photo paper.When I set it, press OK - and then go in again - the paper size has been reset back to A4.I've tried to set the paper size to photo paper 4 x 6 in many different ways in the printer driver but it always changes the setting back to A4 - even though the printer is loaded with photo paper.What to do?

    I want to print photos and try to set the paper size to 4 x 6 photo paper.When I set it, press OK - and then go in again - the paper size has been reset back to A4.I've tried to set the paper size to photo paper 4 x 6 in many different ways in the printer driver but it always changes the setting back to A4 - even though the printer is loaded with photo paper.What to do?

Maybe you are looking for