Cannot change password in Facebook setting

Cannot change password for Facebook in settings

Even on on my iPad 4 i can not change my name and password or any other setting. You always run into a problem when Facebook has a large update that changes its User interface

Similar Messages

How to set "User cannot change password" on W2K accounts.

Hi gurus,
I need to set (from create user form) "User cannot change password" on W2K accounts.
I was expected that some value of userAccountControl attribute on AD could do the job, but I realized that it is not so (look also to http://forum.java.sun.com/thread.jspa?threadID=593193&messageID=3108889).
Thanks for any suggestion.

Yeah thats right, I have implemented the same using nTSecurityDescriptor attribute

Windows 8.1 cannot change password in Windows 2003 domain level domain

On several installations of windows 8.1 enterprise, users cannot change passwords by using <ctrl> + <al> + <del> keys and choosing change password.
The error is: "The security database on the server does not have a computer account for this workstation trust relationship"
Fresh Windows 8.1 enterprise installs with no patches to fully patched windows 8.1 enterprise workstations have the problem. Backed out patches one by one and tested password change without success. Tried various dell laptops, tablets, and workstations
but same issue. Tried VMware guest workstation with windows 8.1 enterprise. The domain functional level is 2003 with a mixture of Windows 2008 R2 DC's and Windows 2003 DC's.
The add/remove from domain did not help. What troubleshooting steps should I take from this point? Is this related to secure channel failures? Note: did not find event log entries for the failures in the DC's nor on the workstation.
Perhaps I did not search for the proper entry on the DC's.

Hi,
Please find below several possible cause of error “The security database on the server does
not have a computer account for this workstation trust relationship”
Secure channel is broken (Can fix by rejoin problematic client to domain)
AD replication issue. The computer account exists on one domain controller but not others.
Duplicated SPN (seems not possible)
So, to narrow down the issue, you need to make sure the AD replication is working fine. Please run command
repadmin /showrepl * on a DC, then post the result here.
After that, please run
set l on a problematic client, then post the result here.
Moreover, please check on system event log and check if there have any related error of the issue.
Thanks.

2012 R2 RD Session Host Domain Users Cannot Change Password

I set up a Windows 2012 R2 Session Host as per
http://support.microsoft.com/kb/2833839 and joined it to the domain. Now, users are unable to change their password. When they log in to the RDSH and "ctrl-del-end", they are given the change password dialog, but they are told that
their password "doesn't meet complexity requirements" even if it does. I suspect the issue is related to the fact that there is no "session collection" per se and that the "connection broker" role is not installed.
Is there any way around this? The end game would be to have them log into this RDSH and be able to change their password to conform with the domain password policy
PaulK

Hi Paulk,
Did you mean that all users cannot change passwords? Based on my experience, this issue was not related ro the RD connection broker role.
Please check the password policy in group policy of the domain to see if any password policy caused this issue:
Computer Configuration\Windows Settings\Security Settings\Account Policies\Password Policy
For more information, you can refer to the link below:
https://technet.microsoft.com/en-us/library/hh994572(v=ws.10).aspx
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

User cannot change password option is automatically getting unchecked while giving domain admin rights

user cannot change password option is automatically getting unchecked while giving domain admin rights

Greetings!
"Domain Admins" falls into the category of protected groups and it is included in ADminSDHolder process. It is normal and was designed in order to prevent the modification to these privileged groups. More information on the link below:
AdminSDHolder, Protected Groups and SDPROP
Regards.
Mahdi Tehrani |
|
www.mahditehrani.ir
Please click on Propose As Answer or to mark this post as
and helpful for other people.
This posting is provided AS-IS with no warranties, and confers no rights.
How to query members of 'Local Administrators' group in all computers?

HT1933 I have old email address's I used for iTune music purchases and cannot change password on several old accounts. Now some of the music I purchased I can not download and authorize it on my device. What can I do password security does not match my bi

I have old email address's I used for iTune music purchases and cannot change password on several old accounts. Now some of the music I purchased I can not download and authorize it on my device. What can I do password security does not match my birthdate on two of the accounts. Apple can not send me email with a password authorization on several current accounts that I have with them. How can I contact Apple with this annoying problem I can not fix.

settings - app/iTunes store - sign out and sign back in with your new id.
Note - if your older apps needs an update it will use your old apple id and password, as Apps are tied to the apple id that was used to purchase it.
You can't merge apple id.

After joining computer to the windows doamin i cannot change password for Mac for the domain user

After joining computer to the windows doamin i cannot change password for Mac for the domain user

Hi,
Did this problem occures after installed Windows 8.1 Update 1? Here is another thread that had similar problem. Also I don't think this problem relate with Domain. Please refer to the solution of the thread below for reference, If there is any
progress, please let us know.
http://social.technet.microsoft.com/Forums/en-US/08993680-b6f5-4e80-b031-d32fec97d682/not-able-to-right-click-on-tiles-after-81-update?forum=w8itproge
Roger Lu
TechNet Community Support

Migrating from server 2003R2 to 2008R2 User cannot change password box unchecks after being checked.

After Migrating the domain controller from server 2003 R2 to 2008 R2 the check box for users cannot change password wont stay checked. This is happening to ALL users and no they are not a member of any Protected Groups. I have searched for a solution
for months but cant not find.
And now after migrating the exchange 2003 to 2010 I have to keep applying the inherited permissions every hour until a user finally makes an active sync.
Now having more AD issues, cant remove users from Exchange 2010...And again have to go to the DC and applying the inherited permissions, then I can remove the user.
I really need help with this...
John

Hi,
Did you use the migration tools to do the user migration?
Permissions on a user that is migrated from an Active Directory domain are reset to default values during migration.
I think this is by design:
http://technet.microsoft.com/en-us/library/cc974359(v=ws.10).aspx
Regards.
Vivian Wang

TMG 2010 publishing Exchange 2010 OWA cannot change password if user must change password at first logon is set

Hi,
I have an odd issue whereby if I set "user must change password" on an AD account, the end user cannot logon, they're simply taken back to the OWA login page as if their password is incorrect.
My setup is as follows:
outer TMG -- uses a listener for email.contoso.com and is configured for no authentication.This uses a publishing rule to publish the inner TMG server. This server is not a domain member.
inner TMG - uses a listener for email.contoso.com and is configured for NLTM\kerberos negotiation with forms authentication (Windows Active Directory). This server is a domain member and use a publishing rule to publish the internal CAS. Allow users to change
password is selected in the publishing rules.
Exchange 2010 SP1 - uses integrated windows and basic authentication. Has the appropriate registry key configured to allow users to change their AD password on first logon.
I've registered an snp for "http/email.contoso.com mailserver-dc1", all SSL certificates being used are valid and my configuration used to allow users to login and change their password with "user must change password on first login"
set in AD.
If I launch a web browser on an internal server and point it to email.contoso.com I'm immediately presented with a generic Windows authentication request (similar to what's seen in ADFS) rather than the standard OWA page. No matter what I do, I cannot login
and change my password using the correct URL. However if I point my browser at
http://192.168.4.10/owa I'm prompted to login and I can change my password using the sam credentials.
The only recent changes made are:
- Disabling SSL 3.0 and enabling TLS (http://www.isaserver.org/articles-tutorials/configuration-security/improving-ssl-security-forefront-threat-management-gateway-tmg-2010-published-web-sites.html)
- Replacing the TMG listener certificates so that they now use SHA2 rather than SHA2 (certificates are trusted on each TMG server)
Looking on the outer TMG and the DC logs I can see schannel errors which I believe are related to the problem. TMG monitoring also shows "Failed connection attempt: 1907 The user'spassword must be changed before logging on for the first time"
I've checked that my inner TMG and DC are using the same certificate for server authentication and gone through this guide:
http://blogs.technet.com/b/keithab/archive/2012/02/29/setting-up-and-troubleshooting-ldaps-authentication-in-forefront-tmg-2010.aspx
If I try to use ldp.exe on the inner TMG, I get the error in the pic below
Thanks
IT Support/Everything

Hi,
You could try to analyze the TMG tracing and try the troubleshoot steps in the blog below.
TMG 2010 – FBA, troubleshooting the change password feature
http://blogs.technet.com/b/isablog/archive/2012/05/07/tmg-2010-fba-troubleshooting-the-change-password-feature.aspx
Best Regards,
Joyce

TS3899 Help! I cannot access my settings and facebook settings within 'Settings'. This means I cannot change passwords, delete or add email accounts. I've tried updating and restoring my phone but to no avail. Can anyone help me please?

Can anyone help please? I cannot access my email account settings within 'Settings', so I cannot change my details for existing email accounts, nor can I delete them or add others.
I can't access my Facebook settings within 'Settings' either but when I try to use the app it asks me to enter my password into my Facebook account in settings, but I can't do that either.
I've updated my software, restored and backed up my phone but it still doesn't work. Troubleshooting doesn't cover this.

Go to Settings>General>Restrictions. Do you have restrictions on? If so, that would prevent you from making changes in some areas of the iPhone.

Cannot change password expired password

Hi there,
I am not able to change expired password on Windows server 2012. I am getting the error message that "You must change your password before logging on the first time. Please update your password or contact your system administrator or technical support"
I had similar issue in Windows 2008 servers and was resolved when I changed the the RDP security layer to negociate. But I couldn't find Session host configuration snap-in since RDS is not enabled.
Any one faced same issue?
Thanks,
Ranjith

Hi Ranjith,
How are things going?
You could try to change the Security Layer to
RDP Security Layer in the Security section of
Session Collection properties.
In addition, if you are using remote desktop over RD Gateway, there is no support for being able to use the “User must change password at next logon”.
Please refer to these two threads which is similar with your issues.
https://social.technet.microsoft.com/Forums/windowsserver/en-US/320ef31a-1160-4c33-9912-79a3838fc24d/forcefuly-user-should-change-his-password-when-loggin-for-the-first-time?forum=winserverTS
https://social.technet.microsoft.com/Forums/windowsserver/en-US/8761e29a-72a0-4f9c-b31b-ff81633020dd/user-must-change-password-setting-using-rdp-to-server-2012?forum=winserverTS
Hope this helps.
Best Regards,
Tina

Cannot change password or admin login

i have done everything i was advised to do but it just cant work bcus has tied the password and admin login
some were in the computer.some people advised that i should take it to an apple store in my country
but we dont have an apple store or a representative in cameroun, what next do i do?pls help

Hello:
Ok here we go:
1- You have to restart your MBA holding down the Command+S keys, and this will take you into Single User Mode and it’s Terminal interface.
2- Then you have to check the filesystem. to do this you have to type the following command in the terminal interface:
fsck -fy
3- Then you have to mount the root drive with write option enabled so you can apply and save any changes. Type this in the temrinal interface:
mount -uw /
4- And then type this command exactly as you see it here:
rm /var/db/.AppleSetupDone
5- Reboot your MBA by typing this in the terminal interface:
reboot
6- After you reboot, you will be see the “Welcome Wizard” startup screen. Follow the wizard and create a new user account. This new account name must be different from the one you already have
7- Continue and boot into your Mac OS X with the new account you have just created, this new user account is an Administrator and has administrative access
8- Now that you're logged in, go to System Preferences
9- Click on Users & Groups
10- Click on the Lock icon and use your newly created user name and password if asked. This will allow you to make changes to other user accounts
11- On the user panel select the user account whose password you cannot change and then click on the Change Password... button and enter your new password.
12- Delete, or grant administrative privileges to that old account
13- Reboot/restart your MBA and now you can log back in with your old account. If you want you can delete the user account you created following this steps.
Hope this helps.
Good luck

Cannot change Hide Sent Messages setting

I have a user that had his Curve 8530 replaced. With his previous unit, he had the Hide Sent Messages setting (in Messages - General Options) set to Yes. With his new unit, everytime he changes that setting to Yes and saves the change the sent messages are not hidden. He goes back into the options and the setting is back to No. No matter how many times he's changed and saved the setting it doesn't work. He can change other settings on this screen (like Hide Read Filed Messages) and those settings remain saved. He cannot change the Hide Sent Messages for some reason. He's removed the battery and still doesn't work. We are on the Enterprise Server and I can't find anything in there that would have changed that would be preventing this. Any ideas? Thanks.

Hello,
Nope...there is no such setting. My hope is that as they continue to develop the product, that they will even further enhance the replication of the on-device experience into Blend. But, for now, it is what it is.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

TS3988 cannot change password

I cannot change my iCloud password - anywhere. In the iCloud View Account panel, there is absolutely no option available to change password. Are there any online options??

Welcome to the Apple Community.
In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
Providing you are simply updating your existing details and not changing to another account, when you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again.

User cannot change password

Users can log on fine to the 10.4 server (new install) from 9.2 clients with their current passwords, but if they try to change their password they get the following error:
"unknown user, incorrect password or log on is disabled"
BTW, logins are not disabled obviously
ideas? Thanks, Tom

Hi,
just for your information: Re: Change password on the first use - does not work

Cannot change password in Facebook setting

Similar Messages

Maybe you are looking for