Cannot change planning profile group from Marketing Plan

I try to change the Planning Profile Group of a marketing plan from 'Business Marketing' to blank and get the error message
Transfer of char. val. combination only allowed with a time specification
Does anyone know what it means?
Philip

Hi Philip,
Are you specifying Time details in the Planning sheet.
Please check the same as it is one of the primary dimensions.
Best Regards,
Pratik Patel

Similar Messages

Handling Planned order created from Demand planning and Sales order in MTO

Hi all
In MTO\ Repetitive we genrate Dependent requirement from demand planning (PIR) after running MRP which finally planned order created but on the other hand in short term we have Sales order which generate planned order after running MRP(In MTO), How we should handle planned order generated from Demand planning and the ones generated from sales order.(both after MRP Running).
Regards
Babak Bolourchi

Dear,
You can combine the planning strategy also main as 56 and second as 65 and in demand managment MD61 you have the option select requirement type.
Then while creating sales order use MTO strategy and take MRP run through MD50 and then MD02.
and if you want to assign the stock to sales order then you and do it through MB1b with 412 E movement type.
As per my knowledge, generally 56 strategy only takes Sales Order Stock into consideration.
Consider setting the Individual/Collective indicator to 2.
Mark those characteristics that should have a usage probability in demand management as Relevant for planning.
Hope clear to you.
Regards,
R.Brahmankar

Cannot send messages to groups from OVI

Hi, unless anyone has found a way, I cannot send messages to groups from OVI. So, nice one can define a group - but pretty useless....
Solved!
Go to Solution.

Hi,
You can send with the coming version of Nokia Ovi Suite 3.1
You can get this now from http://betalabs.nokia.com/
Br
Mahayv

ICloud: cannot change account profile

Hi,
I recently changed my icloud account/mailaddress id on Itunes. Now when I want to login on ICloud, it tells me the login is wrong but I don't have the option to change it.
I added the old mailaddress I used via id.apple.com and verified/confirmed it via mail but still no luck logging in with old id. If I try to delete the account it asks for my password (with old id) and again it says the password is not ok. So I cannot change my appleid for icloud, I cannot delete it.
Also via Itunes no way to change. Please advise.
Please advise.
Steven

Hi
I have same problem,
but when I try to delete the id (as you wrote) is required to enter the password from the old id to turn off "find the iPhone" funtion

Cannot change file permission / privilege from custom to anything else

After I successfully set up file sharing on my MacBook Pro, my colleague dropped off some files for me in the Drop Box. The problem is, I cannot change the permissions for myself on these files.
When I "Get Info", I have no problems changing the permissions for all other users.
But when I try to change for "myname (Me): custom" to anything else, it remains unchanged.
Btw, even after I click on the lock icon, and enter my password, the "Locked" and "Stationery Pad" checkboxes remain greyed out.
How do I change the permission for (Me) to Read & Write? I am already the Admin on this comp. Is anyone else having this problem?

Solved, at least for me! Check it out.
I also had a bunch (3) of 'users' on both my startup drive (Tiger) and my second internal drive (no system). This happened after I did an 'archive/install' of Leopard on an external FW drive and using Migration Assistant to move the rest of my root-drive files onto the same FW disk.
At some point, probably after restarting from the FW Leopard disk, the 2nd internal drive /Disk_Two, had privileges set to custom for all 3 users and the disk was locked. Disk Utility was grayed out for permission check/repair.
I tried the terminal command...
chris$ sudo fsaclctl -p /Volumes/Disk_Two -d
...but no luck.
But tonight I am happy! I am using my laptop (Leopard) to make these repairs with the two internal hard drives and the external FW drive of my Dual G5 available through Target Mode.
Thanks to Niel at
http://discussions.apple.com/message.jspa?messageID=8823809
I typed into terminal
chris$ sudo chflags nouchg /Volumes/Disk_Two
and all is fine. ONE set of proper permissions (was three!).
chris$ ls -le
drwxrw-rwx 122 chris chris 4216 Feb 24 22:45 Disk_Two
The startup disk, Macintosh HD, had similar problems, but was not locked. I used the same command...
BUT, as Niel suggests, type up to...
chris$ sudo chflags nouchg <- space
and drag the drive onto terminal. This was important since the Target-Mode drive is called "Macintosh HD 1" since my laptop already has a Macintosh HD.
Finally, ls -le didn't look good after the above maneuver, but when I "get info" and unlock the little keypad at the bottom, all the weird users with 'custom' permissions disappear and I'm left with usual (and wonderful to see again) users which I can once again modify for permissions!

BizTak SSO - why I cannot change the Windows Group

For some wired reason I an unable to add / change the "Windows Group" for "SSO Administrators" "SSO Affiliate Administrators(s)".
SSO worked, but stopped working after one of the reboots. I'm sure "Windows Group" was there but now those fields are empty and unable to be edited.

That you don't see anything filled can be caused be the fact that your account hasn't the necessary privelleges.
Are you a local admin on that computer?
You can check in de SSO database what is filled in by the query:
SELECT [gi_SSOAdminGroup]
,[gi_AffiliateAppMgrGroup]
FROM [SSODB].[dbo].[SSOX_GlobalInfo]

Cannot change setting in privacy from remember history to use custom settings for history. I can set in to change but on closing with the ok button thus closing the privacy tab, it then reverts back to remember history.

I have been by a web sit that the cookies are disabled in the browser. on looking at the help on firefox help the instuction as i understand was to change the setting under the privacy tab ref history fromthe default setting of rember hhistory to use custom settings for history. I change the setting click ok but it reverts back to rember history. I just cannot change the setting.This also happend in the prevous version.

To see History and Cookie settings in Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
You need to make at least one change to make "Use Custom settings" stay selected.
If all history settings are the default then the History and Cookie setting revert to "Remember history" the next time you open Tools > Options > Privacy.
So it looks that your cookie setting are already correct.
* http://kb.mozillazine.org/Cookies
* http://kb.mozillazine.org/Websites_report_cookies_are_disabled

I cannot sync my contact groups from Outlook 2010 (Win 7) onto my iPad. Can anyone help please ?

I cannor sync my contact groups from Outlook 2010 (Win 7) onto my iPad. Can anyone help please ?

in Itunes, once you connect the iPad, do you see the 'info' tab? Tap that and scroll down and see if outlook is chosen as the place to sync contacts from. If not, check it and sync and see if your contacts move over.

View db alerts generated in planning book A from within planning book B?

Hi,
I have a db alert macro implemented as a default macro in one of our SNP planning books/data view. This is correctly generating db alerts per the criteria coded into the macro. In Alert Monitor, the database alerts show the planning book (book A) and data view (view 1) from which the alerts were generated.
The planners monitoring this specific alert do not have/should not have access to planning book A and data view 1, but will have access to a different planning book (B)/data view (2) within the same planning area.
Is it possible to generate a db alert from a default macro residing in planning book A, data view 1 but have the db alert as viewed in Alert Monitor display a different planning book (B), data view (2) so that when the user launches Supply Network Planning by right clicking on the db alert, the user is taken to planning book B, data view 2 with the alert selection loaded?
In short, I need to generate db alerts via a default macro in one planning book/data view but must enable planners who monitor these alerts to do so in a different planning book, data view -- all within the same planning area.
I saw an earlier thread (id 4517019) that seemed to indicate this was possible to assign db alerts generated in one planning book to another planning book, but it was not clear how to implement this. We are on APO version 4.0. In the macro's Alert/status element properties I do see a section called 'Different Source' which allows me to specify a different planning book and macro. However, I do not understand how this is meant to be used and whether this will be useful to me.
I would appreciate any help you can offer.
Thanks!
- Heidi

Saradha,
Thank you for your reply! I checked the various versions of SAP help and found that only as of Release SCM 4.1 can you assign the alerts that are generated in a planning book/ data view to another planning book/data view via the mechanism you explained. That tells me that perhaps in SCM 4.0 there is no straightforward way of doing this.
In 4.0, when I double click the macro alert element I see different attributes - one of them is in a section titled 'Different Source' and contains to fields - one that allows you to specify a planning book and the other to specify a macro in that planning book. I'm experimenting with that now to better understand what it's purpose is. If you have any idea, please let me know. Otherwise, thanks very much for your response!
Thanks,
- Heidi

Lumia 800 Cannot Download a single App from Market...

Hello,
I've just bought a Lumia 800 on July 20, 2012 from a retailer in the Philippines and am using it in the same.
I downloaded Zune for Windows 7 on my dual boot mac. I downloaded all updates till Zune said there was no more available on the Windows 7 partition. It succesfully installed. I am up to date according to the latest firmware as noted on Nokia firmware and MS OS as of today.
I have not been able to download a single app since I got the phone. I use the marketplace app on the phone and have also tried "pushing" the app from the marketplace on Firefox/Chrome on my Mac and PC.
The phone goes to marketplace downloads, says "Pending" starts to says "Downloading 0%" till it says "Tap here" then I have to retry download. Been trying this all night, and have been reseting the phone by holding the button below the volume control till the phone says "Goodbye" then I boot it up and the same still happens.
I've also tried a hard reset, formatting to factory settings. That did not let me download a single app either. Since I needed the phone, I restored my data. I have been using a wifi connection with broadband at home. I can surf IE on the phone, check mail, but the marketplace has always been off for the few days I've owned the darn thing. I can open the marketplace app, I can see apps, I can browse them, and I can click install, reinstall (for some reason Windows Live thinks its already installed).
Am I missing something? I tried cancelling all other downloads except Whatsapp and still no dice. I've cancelled all downloads, restarted and tried again and to this day, I have an app phone that can't get apps from it's own marketplace.
I tried setting my windows live ID to jive with my region and language, all the same, US or Philippine english, nothing.
I've tried writing emails to Nokia Philippines support and after typing all this they just told me to 1. open marketplace app, 2. Click Download (Arrgghhhh talk about canned STUPID RESPONSES, the guy obviously did not read my email that I did the same.)
Please help me.

Hi kosh, Yes I have done a hard reset even at the risk of losing all my contacts. I've also tried creating a new live ID to sign in after the hard reset was made. Sadly such did not work so I eventually just restored my contacts. I find it disappointing that groups does not sync so if ever I do need to change live IDs I'll have to remake all the groups again. Such is the loss of a loyal Nokia customer who has to pay for Symbian going and ms entering. I find it odd that I would even have to create a new live account as the one already designated as the primary account attached to the phone was created upon first boot of the phone. But I guess there's no loss trying one more time since accounts are free. I'll have to do it some other time as I am currently mobile and had to leave the phone cause the total lack of apps has rendered it insufficient for my needs. I will update the forum once Nokia and/or Microsoft contacts me. Really hoping they just replace the darn thing since I bought the phone open line out of carrier making this feel more of a waste, and I wouldn't want a phone like this sent for repair this fresh or given a refurb.

Cannot process on shared group from FCPX/Motion

I am using Compressor 4.1 with FCPX 10.1 on Mavericks 10.9.1. When I share a video project to Compressor, I am unable to select the shared computer group I set up (Mac Pro Group) for processing. The "Process on:" drop down shows my group, but it is grayed out. I can see "Mac Pro Group" as an option, but can only select is "This Computer". The same thing happens when sharing to Compressor with Motion 5.1. BTW, the computer I am sharing to is 2012 iMac running the same, up to date versions of Mavericks, Compressor, and FCPX.
However, when I drag and drop a .mov file from elsewhere on my computer directly into Compressor, I can use the group I set up for processing.
**Why can't I share processing from FCPX 10.1 and Motion 5.1 using Compressor 4.1?!**
Thanks!

Hi, In addition to the helpful posts in this thread on this commonly asked issue, a recent post here (https://discussions.apple.com/thread/5936529?tstart=0) shows where this restriction is documented by Apple  for others to also review. This post is the contains as the subsequent post by Akasian.
Perhaps you might CLOSE this post as resolved.
Warwick
Hong Kong

I cannot change my input language from multitap to suretype.

I've tried going to language under device options and switching the input language, but under input language options there is English (United Kingdom) and English (United States), no "ensure multitap" or "ensure suretype." I tried going to the body of a text message and email and opening the menu and clicking on "change input language" but once again my options are English (United Kingdom) and English (United States), no "ensure multitap" or "ensure suretype." I also tried going to the body of a text message or email and holding the * key for 2 to 3 seconds and still nothing happened.
I just got this new phone two days ago and when I inserted the battery and turned it on it was on suretype. This is what I wanted. Last night I locked the phone when I went out to dinner and when I unlocked it after dinner I went to reply to a text and it was in multitap mode although I never changed it. Now I can't change it back. Please help!
[email protected]

To switch from multitap to suretype and vice versa you need to be in a field where you can type text. Then hit the menu key and select "Enable SureType" or "Enable MultiTap."
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Cannot change compound clip settings from 1080P 60fps to 1080i 25fps

Hi. I created a compound clip, which for some reason ended up with settings of 1080P 60fps (probably because I added a music track first before any video and just used the automatic settings). After editing a whole sequence and exporting a master file, I realized the settings had been wrong. All my footage is 1080i 25fps.
Only thing is when I tried to change the compound clip settings, I only had other progressive options available. I could not change it to 1080i.
I had to create a brand new Compound Clip with 1080i 25 and paste the clips from the original CC into the new CC. Only thing was a music track was now out of sync with the video (presumably because the fps value in the original CC did not match the footage). I had to retime the audio track to around 99% speed to fit to the video clips again!
Why could I not change the CC settings directly?
Thanks

The compound clip is acting like a project. You can never change the timebase of project once there's media in it. You should copy and paste into a new compound clip if you can.

Planning profile creation in budgeting in marketing plan

Dear all,
Please explain me how to create the planning profile and assign it to planning profile group in budgeting in marketing plan.I am unable to create the planning profile while creating the planning profile group.Please brief me.

Hi Ramesh,
Below link will help you a lot..
Settings for Key Figure Planning (SAP CRM) - SAP for Consumer Products: Documentation for Solution Manager Co - SAP Libr…
Rgds
Hari

Not clear with the Authorization concept for Marketing Plan

Hi All,
I am new to CRM and was going through some of the prescribed document for CRM marketing
when i encounter with the authorization concept in marketing plan,for example how
can i restrict a user with a campaign manager role from changing marketing plan.please
provide the step by step procedure.
Regards,
Sanju

Hi Sanju
User with a campaign manager role can be restricted for changing marketing plan using authorization group.
We define authorization groups for use in the Marketing Planner. Authorization groups can be maintained at both marketing plan level and campaign or trade promotion level. Authorization groups enable us to control which users are authorized to change which of these two types of marketing project. We could, for example, define one authorization group to be assigned to a marketing plan, then define further authorization groups to be assigned to the different campaigns within the marketing plan. In the Marketing Planne.
Follow below steps
1. Define authorization group using following IMG Path
Customer Relationship Management / Marketing / General Settings / Define Authorization Group.
2. In authorization object CRM_CPGAGR of the role Campaign manager maiantian activity 01, 02, 03 ,06 (this will allow user to create, change, display and delete)
3. IMG defined authorization group ex: ABC can be seen under the tabstrip Basic Data of marketing plan.
4. Now user have to choose the Authorization group ABC from the drop down in Basic tab to create a marketing plan. User will get the change access for all the marketing plan which have the authorization object ABC.
Hope this will help...
Rgds
Mallikarjun

Cannot change planning profile group from Marketing Plan

Similar Messages

Maybe you are looking for