Cannot change price using MR21

Hi Gurus,
Good day!
I would like to ask how come that I was not able to change the price using tcode MR21 for a certain material, the new price column is disabled. Is there any authorization / configuration issues here?
Please advice.
Regards,
Virgilio

After entering into MR21, type in /NSU53 and send it to basis to check fo limited authorization.

Similar Messages

  • Problem with changing the Standard Price using MR21

    I'm upgrading the system from 4.6C to ECC6.
    Upgrading the Standard Price works normally in 4.6C. However, in ECC6, I notice that the data saved to CDPOS table is wrongly formatted. Therefore the other programs fail to read from this table.
    Standard price is supposed to be right-justified. But it not like that in ECC6.
    Can anyone tell me we should I look into to control the process of saving the data to CDPOS?
    Thanks.
    Han

    Thanks Amuktha.
    The link doesn't seem to help resolving my problem.
    The changes is saved into CDPOS in the field Value_New (CHARACTER 254) in the way that the actual data can be retrieved by:
    value_new+238
    But any update to the standard price using MR21 now result in the value of Value_New that require:
    value_new+7
    to get the actual data.
    Further more, in the old system, the standard price value in the decimal form like: "55.66" will be save to VALUE_NEW as "5566". So to get the real value, the system need to devide the value by 100 to get the actual new price.
    In the ECC6 system, it is exactly the same as what we input: "55.66".
    My question is: Is there an user exit, BADI or any way that can interfere the process of saving the data to CDPOS so that I can ensure the new Price will be save as "5566" and can be extracted using VALUE_NEW+238?
    Thanks.
    Han

  • Change price with MR21

    HI,
    HOW TO CHANGE THE PRICE OF MATERIALS IN MR21?
    WHAT CRITERIA REQUIRED FOR PERTICULAR MATERIAL TO CHANGE PRICE WITH MR21?

    Go to MR21 and Enter
    Posting Date
    Company Code
    Plant
    Press Enter
    in the Next screen enter material, It will show you the Current valuation price in the " Current Valuation Price tab"...
    enter New price in the "New Price " Tab..
    This New Price will be applicable to the Period for the Posting Date you have maintained..
    Pls Reward Points If Useful..

  • Cannot change price unit in POs

    Hi all!
    I have a PO with an item like this:
    Price = 125
    Currency = USD
    Price unit (per) = 1
    The user would like to change the field "Price unit (per)" to 10.
    But when we change the value is reset to 1.
    We've tried to change the value in the Item Overview and in the item details, the field is not grayed so you can change the value, but is always reset to 1.
    The only way to do that is going to the tab "Prices and Conditions" and changing the value there.
    Do you know if this is the standard behaviour? Or depends on something we can change to allow the user to do it?
    Regards,
    Ricardo.

    Hello,
    i do not think this is the standard behavior.
    Do you have a contract as source of supply in your PO ?
    Maybe a problem with the IPC ?
    I advice you to put a break-point inside BBP_PDPRC_UPDATE function modul and check the process.
    Regards.
    Laurent.

  • How can I reset preferences on my desktop file arrangement? I cannot change it using the prescribed way.

    I am running OS 10.5.8. Recntly I have been unable to set the arrange preferences on my desktop icons to anyhting but by "name". I can select the other options but it always returns arranged alphabetically by name.

    If you have the B&W G3 mini-tower, it has an ATAPI interface for the optical drive on the motherboard. If someone has installed a SCSI CD-ROM drive in it, it would have to be connected to a SCSI controller PCI card. If you don't mind investing about $30-$35 in the computer, replace the CD-ROM drive with an ATAPI Pioneer DVD±RW drive in the optical drive bay. Because it isn't Mac-specific, it can be purchased anywhere - including PC stores. I recommend a Pioneer drive because it tends to be more compatible with Macs, in terms of booting to the "C" key at startup. Set the jumper on the back of the drive to Master (factory default is typically Cable Select). The B&W G3 doesn't support the Startup Manager feature, so the Option key doesn't function for that purpose. Additionally, the B&W G3s don't support FireWire booting. If you have an alternate (supported) bootable source, it's best to use the 4-key combination at startup: Command + Option + Shift + Delete to select it. The CD versions of Tiger look the same as the DVDs (black disk with silver X across it) and aren't grey restore disks. The CD versions of Tiger are more scarce, so the price for them is quite high. The same has become true for the Tiger universal installer DVD.

  • Change price in material master

    Dear Experts,
    May I know how we can change std. price that maintained in material master. I believe t/code MR21 use to change price for MOP (moving average price) but I'm not sure for std. price.
    *Please assist me how we can use MR21 & what are the important element need to take care during price change by using MR21. And please help me to understand the t/code as well.
    Thank you.
    rgds,
    nantha

    HI,
    MR21 is for valuation price change. Go to t code and enter the material number and new price and save.
    Check the accounting impact in accounting documents.
    Regards
    Ram

  • When I connect my iPod touch to my stereo, I cannot skip tracks using my iPod or the stereo controls.

    When I connect my iPod touch to my stereo, I cannot change tracks using the iPod or the stereo controls. I did not have this problem with my iPod nano. I have the software update 4.2.1 installed. Is it a problem with the software or the stereo? Please help.

    Here:
    iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

  • Price change for materiale mr21

    Hi all..
    I have the following situation.
    I want to chage the price of a material let's say today..
    Today I have in stock 10000 pcs for 10 USD so the value is 100000.
    If I change the value per material to 15 USD the total value of stock is 150000.
    In this case sap is reaevaluating the stock with the new standard price...
    For me it shouold work like this.:
    stock value is 100000 for 10 usd.
    1 pcs of material in for 15 usd....
    so the value of stock would be 100015.
    Is there a flag somewhere for this... ??
    Thanks.

    Hi Andrew,
    a standard price material always have a uniform price, therefore a price change will revalue the complete stock.
    If you changed the price control to V the behaviour would be as you desire. Only you should not use MR21. When you enter a goods receipt at a price of 15 the new stock value would reflect thr former quantities at the old price plus the new quantity valued at 15.
    best regards,
    Udo

  • Help! I have a new iPhone 5s. My husband just lost his 4s, so I want to give him mine. Want to use same Apple ID so we both have access to itunes/apps purchases. Want to separate contacts, messages, mail, etc. I cannot change iCloud address.

    Help! I have a new iPhone 5s. My husband just lost his 4s, so I want to give him my 4s. We want to use same Apple ID so we both have access to itunes/apps purchases. Want to separate contacts, messages, mail, etc. I cannot change iCloud address on 4s iPhone. Also, when I tried to change iMessage I got a message that if I deleted my id (which seemed to be the only way to get my husband's I'd there), I would not be able to receive iMessages on any device.
    Would someone kindly tell me how to set up th 4s for my husband so that we can keep our info separate? It would be most appreciated! Thanks!!

    Hey Fagen!
    You will want to see the following article for guidance on achieving the result you wish to achieve:
    What to do before selling or giving away your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/ht5661
    I would just follow the instructions from this article to give your unused 4s to your spouse. Since you have already started using your 5s, you will still be receiving iMessages on that phone and will have no need to receive them on a device that has been replaced. Thanks for coming to the Apple Support Communities!
    Cheers,
    Braden

  • I changed my apple id email address to try jumpstart my account to send me a verification email for iCloud activation.  It worked but now I cannot change back to my original email address.  It says its in use.

    Hi Guys
    I am writing this on behalf of a friend of mine.  To understand my issue let me explain how it started.  My friend has a apple ID with email address (lets call it) [email protected]  when activating iCloud on her iPhone a email was sent to verify her account.  This was not done and rendered the iCloud feature disabled due to not being activated.  [email protected] is the correct email address and works.  A form of troubleshooting I used the iForgot service to test if the email address was correct and mail flow from apple was working and it worked fine.
    I logged into apple id to manage account and resend activation email for iCloud.  this did not send the mail.  I waited 48hrs but to no avail.
    I decided to kickstart the account to force it to send to another email address by changing the primary email address from [email protected] to [email protected]  it worked and I verified the address and iCloud is now active.  However now I cannot change the primary email address back to [email protected] as it says its being used by another apple ID. 
    I then tried iForgot with the [email protected] email address, it says it sent a email to [email protected] but nothing arrived in [email protected] or [email protected]
    I have this feeling the [email protected] is stuck I'm memory on my apple ID some how but can't get it to forget [email protected] so that I can use it as my primary email address again.
    I have tried to log into iTunes with my original details [email protected] and password but says its incorrect.
    any advices in this would be greatly appreciated.

    The idea to jumpstart by change was not the smartest one, but gives you an opportunity to use that "temporary" account as permanent. You do not have a choice cause obviously despite you thinking that old account is no more -it does exist on Apple servers. And if you are unwilling to share your [email protected] with friend, just create one extra [email protected] for your friend. One suggestion - do not use gmail.

  • I cannot change song order on playlist with highlight and drag. I have turned off shuffle and highlighted the far left column( up/down arrow) of playlist. My mac pro is running 10.5.8  and am using itunes 10.4.

    I cannot change song order on playlists (old or new) with highlight and drag. I have turned off shuffle and highlighted the far left column (up/down arrow) of playlist. My mac pro is running 10.5.8  and am using itunes 10.4. I can't drag and drop "music" to "playlist" but can right click and get the option to "add to playlist." No such option for moving song within playlist, only the up and down arrow which moves song from top to bottom list, so if it is #4 from top it will move to #4 from bottom. Stupid I know. I spent over an hour with Apple support, reinstalled itunes, restarted and rebooted computer. Networked with my laptop which is running 10.6.8 and itunes 10.4 and it can drag and drop. The final Apple support solution was to reinstall my operating system. I would prefer not to. Any other ideas?

    After looking at other people's posts, I think it's official: there is a bug. Itunes support said I should not have lost the drag/drop tool and I haven't on the laptop that is running itunes 10.4 and operating system 10.6.8. I chatted with someboby who lost both his drag/drop and side scroll and what we have in common is a wacom tablet for a mouse. My laptop is a wireless mouse. I reinstalled whatever updated driver that wacom has out there, shut the system down for night, hoping for magic, but alas none to be had. So if I want to change song order, I network the laptop and desktop, share the screen on the laptop, drag and drop to my heart's content and curse Apple for making me work this hard to find the tool that was once at my fingertips. Apple also let me know that if I want to share songs in household that the hundreds on songs that were purchased for .99 need to be repurchased for another .30. Maybe Apple is holding my drag/drop tool captive til I pay up the money or Maybe the next update will fix the problem, I for one give up for now.

  • HT1933 I have old email address's I used for iTune music purchases and cannot change password on several old accounts. Now some of the music I purchased I can not download and authorize it on my device. What can I do password security does not match my bi

    I have old email address's I used for iTune music purchases and cannot change password on several old accounts. Now some of the music I purchased I can not download and authorize it on my device. What can I do password security does not match my birthdate on two of the accounts. Apple can not send me email with a password authorization on several current accounts that I have with them. How can I contact Apple with this annoying problem I can not fix.

    settings - app/iTunes store - sign out and sign back in with your new id.
    Note - if your older apps needs an update it will use your old apple id and password, as Apps are tied to the apple id that was used to purchase it.
    You can't merge apple id.

  • How to change price of item using salesorder create bapi

    hi all,
         As per requirement i have to change price of the item while i am creating sales order using sales order create bapi. kindly tell me the process or if possible any sample program.
          thanks in advance
    thanks,
    pavan
    Message was edited by: pavan kumar pisipati

    hi max ,
          i created sales order using following code. from here onwords i have to update to change the price of the item. kindly do the needful. i am working 4.7 ides
    <b>report  zmybapi1        .
    data : my_order_header_in like bapisdhd1 occurs 0 with header line,
           my_order_header_ix like bapisdhd1x.
    data : my_orderitemsin like bapisditm  occurs 0 with header line,
           my_orderitemsix like bapisditmx occurs 0 with header line.
    data : my_order_partners like bapiparnr occurs 0 with header line.
    data : my_return like bapiret2 occurs 0 with header line.
    data : w_vbeln like bapivbeln-vbeln.
    data:
         my_orderschedulesin like bapischdl occurs 0 with header line,
         my_orderschedulesinx like bapischdlx occurs 0 with header line.
    start-of-selection.
    this is to assign values to internal table my_order_header_in
      my_order_header_in-doc_type   = 'TA'.
      my_order_header_in-sales_org  = 'JNJ1'.
      my_order_header_in-distr_chan = '02'.
      my_order_header_in-division   = 'J1'.
      my_order_header_in-sales_off  = 'JNJ1'.
      my_order_header_in-purch_no_c = 'testbapipo'.
      my_order_header_in-purch_date = sy-datum.
      my_order_header_in-req_date_h = sy-datum.
      append my_order_header_in.
    this is to assign values to internal table my_orderitemsin
      my_orderitemsin-material      = '000000000000000727'.
      my_orderitemsin-plant         = 'JNJ1'.
      my_orderitemsin-target_qu     = 'EA'.
      my_orderitemsin-target_qty    = '50'.
      append my_orderitemsin.
    this is to assign values to internal table my_order_partners
      my_order_partners-partn_role = 'AG'.
      my_order_partners-partn_numb = '0000000011'.
      append my_order_partners.
      my_order_partners-partn_role = 'WE'.
      my_order_partners-partn_numb = '0000000011'.
      append my_order_partners.
    This is to assign values to internal table my_orderschedulesin
      my_orderschedulesin-itm_number = '10'.
      my_orderschedulesin-req_qty   = '10'.
      append my_orderschedulesin.
      my_orderschedulesin-itm_number = '20'.
      my_orderschedulesin-req_qty   = '20'.
      append my_orderschedulesin.
      my_order_header_ix-updateflag = 'I'.
      my_order_header_ix-doc_type   = 'X'.
      my_order_header_ix-sales_org  = 'X'.
      my_order_header_ix-distr_chan = 'X'.
      my_order_header_ix-division   = 'X'.
      my_order_header_ix-sales_off  = 'X'.
      my_order_header_ix-purch_no_c = 'X'.
      my_order_header_ix-purch_date = 'X'.
      my_order_header_ix-req_date_h = 'X'.
      my_orderitemsix-updateflag    = 'I'.
      my_orderitemsix-material      = 'X'.
      my_orderitemsix-target_qty    = 'X'.
      my_orderitemsix-plant         = 'X'.
      my_orderitemsix-division      = 'X'.
      my_orderitemsix-target_qu     = 'X'.
      append my_orderitemsix.
      my_orderschedulesinx-updateflag        = 'I'.
      my_orderschedulesinx-itm_number       = 'X'.
      my_orderschedulesinx-req_qty          = 'x'.
      append my_orderschedulesinx.
      my_orderschedulesinx-itm_number       = 'X'.
      my_orderschedulesinx-req_qty          = 'x'.
      append my_orderschedulesinx.
      call function 'BAPI_SALESORDER_CREATEFROMDAT2'
        exporting
      SALESDOCUMENTIN               =
          order_header_in               = my_order_header_in
          order_header_inx              = my_order_header_ix
      SENDER                        =
      BINARY_RELATIONSHIPTYPE       =
      INT_NUMBER_ASSIGNMENT         =
      BEHAVE_WHEN_ERROR             =
      LOGIC_SWITCH                  =
      TESTRUN                       =
      CONVERT                       = ' '
        importing
          salesdocument                 = w_vbeln
        tables
          return                        = my_return
          order_items_in                = my_orderitemsin
          order_items_inx               = my_orderitemsix
          order_partners                = my_order_partners
        ORDER_SCHEDULES_IN            =  my_orderschedulesin
          order_schedules_inx           = my_orderschedulesinx
      ORDER_CONDITIONS_IN           =
      ORDER_CONDITIONS_INX          =
      ORDER_CFGS_REF                =
    if sy-subrc ne 0.
        write: my_return-message, my_return-number, my_return-type.
      else.
         call function 'BAPI_TRANSACTION_COMMIT'
         EXPORTING
           WAIT          =
         IMPORTING
           RETURN        =
          write: my_return-message, my_return-number, my_return-type.
    endif.</b>
    thanks,
    pavan
    Message was edited by: pavan kumar pisipati

  • When I attempt to use software Update, and am then prompted for my Apple ID and password, my apple ID is not complete and it is 'grayed out' so I cannot change it.

    When I attempt to use Software Update, then go to 'Update All', I am then prompted to enter the password for my Apple ID, however my Apple ID does not come up as complete, and it is 'grayed out' and I cannot change it, therefore it is impossible for me to update my software.  How can I change the Apple ID to the correct ID?

    You need to delete the application and then download it from the desired Apple ID.
    (96010)

  • Using PSE11 on MacPro, using a commercial digital template text editing stuck in upper case, cannot change to LC in any font; tried deleting layer

    Using PSE11 on MacPro, using a commercial digital template>text editing>stuck in upper case, cannot change to LC in any font; tried deleting layer

    Can you use lower case in other files? If not, then go to the far right of the tool options and click the little four-lined square and choose Reset Tool.

Maybe you are looking for