Cannot change print settings, print on foto size

When I want to print a webpages the printer (HP6380) prints in the format 10 x 15 instaed of A4. I tried changing the settings in printermenu but it did not help...

When reading your '''More system details...''' for the HPOfficejet 6300 series printer, the paper height is set to 11.0 and the width to 8.5 - '''inch''' settings for Letter size paper - not metric settings for A4 sized paper.
Where are you checking the setting for A4 paper?
{Ctrl + P} to see what is known as the "native print dialog", then check to make sure that printer is selected in the Printer - Name box at the top, and then hit the '''Properties''' button. The preferences that appear there are what Firefox uses. Settings that appear elsewhere or the "default" printer settings aren't what Firefox uses.

Similar Messages

I started my account with a gift card. I have $0.68 credit remaining and I cannot change my settings to use a new gift card. What should I do?

I started my app store account with a gift card. I have $0.68 credit remaining and I cannot change my settings to use a new gift card. What should I do?

Done what? All you can do with an iTunes gift card is redeem it:

Cannot change from default printer in Acrobat X by code

pp.printerName = "\\\\print server\\printer"; works flawlessly in Acrobat 9 Standard but will not change from default printer in Acrobat X Standard unless run in the console. I've checked the printer names through the console and they are listed correctly. Javascript enable menu items is checked. I've even tried creating trusted functions (which still work flawlessly in Acrobat 9, but not in Acrobat X). All other printer settings in Acrobat X change as coded once the printer is changed manually.
Any suggestions?

function printFullPEng() {
var pp = this.getPrintParams();
var pSize = this.getPageBox("Crop");
if (pSize[1] > "792") {pp.printerName = "\\\\print-server\\HP Designjet 4000 HPGL2/RTL (Copy 1)";}
else {pp.printerName = "\\\\print-server\\TOSHIBA 4520C PCL6 - Engineering";};
pp.NumCopies = 1;
pp.pageHandling = pp.constants.handling.none;
fv = pp.constants.flagValues;
pp.flags = (fv.setPageSize);
this.print(pp);
This is tied to a menu button. As I say, it works flawlessly in Acrobat 9, but will not change printers in Acrobat X.

Default print settings - Print by page size

Hello,
I use Acrobat to print odd size documents (odd, meaning other than 8 1/2 x 11, and 11 x 17). I was wondering if there was a setting to default Acrobat to print to a certain page size everytime no matter what dimensions the PDF is?
Thanks!

Have the same issue. Did you get it resolved?

Changing Privacy settings to allow foto upload to iPad Facebook app

I tried to upload a foto fromi pad to Facebook app. I was asked if Facebook could access my FOTOS and I declined. Now I can't upload FOTOS. How do I change my privacy settings to allow foto upload?

If you can't remember the restrictions code then was it on the iPad when you last backed up ? If not then you can restore to that backup and it should be removed. If it was on the iPad when you last backed up then the only way to remove it is to reset the iPad back to factory defaults and you can then re-sync your content back to the iPad - you won't be able to restore to the backup as that will keep the code in place.

Cannot change account settings anymore

When I try and view/change settings of an account I get a pop up message "An account with this name already exists. Please enter a different account name."
This only seems to have happened after the recent upgrade to 31.4.0, prior to this I have always been able to view/change the account settings.

SASLR wrote:
I just started to have the same problem... Can no longer change desktop images... I've tried to do it from within iPhoto, right clicking on desktop, and going in through system preferences... My "padlock" is "open", I am the system administrator, but still cannot change the image...
HELP!
Have you done your homework?
Run DU, check/repair HD and permissions.
If that does not work, move following .plists to desktop; let system create new plists
try this one first:
com.apple.desktop.plist
reboot and see if this fixes it.
if not then move this one to desktop and repeat
com.apple.desktopscreensaver.rsspictures.plist
report back here with results.

Verify: Cannot change sequence settings

So I just want to be sure that I understand this:
I cannot change the details of the sequence presets in FCE HD. Correct?
For example, I can choose the 'AIC 720p30' sequence preset, but I cannot change 30, to say 25?
If I have an existing clip (AIC codec, 1280x720 @ 25 fps) there is no way for me to bring this into FCE without the software rendering it (thus reducing the quality of the existing clip).
I just want to be sure I understand this correctly. I am very surprised that I cannot define sequence presets myself.
Thank you for any clarification you might provide.
BT

Thank you Tom - I really appreciate your response!!
I'm a software developer and I can't tell you how surprised I was when I discovered this limitation. So I decided to try to understand how these presets were defined by FCE.
It is actually very easy (if you are technically inclined) to create your own presets in FCE.
1) Find the FCE HD application in your Finder
2) Right-click on this icon and select "Show Package Contents"
3) Naviate to Contents/Resources/English.lproj/Final Cut Express Settings/Hardware Settings
Inside this directory you will find *.fcpre files that define the presets for FCE HD.
I am not going to explain how to modify these files but those among you who understand file formats should easily be able to create your own presets (it took me about 15 minutes to create a 720p25 preset).
-BT
PS: Do *NOT* attempt this if you don't know what you are doing. At an absolute minimum, make a copy of FCE before you start mucking around - if you mess something up FCE will fail to launch.

Cannot change the settings on Iphone 6 Plus

I just picked up my Iphone 6 Plus, and have been having problems changing my settings. Simple things like ringtone, etc. Each setting allows me to make a change, but it does not save/store once I leave that page. Anything I try reverts back to the original setting.
Has anyone else experienced this? Any suggestions?
Thanks in advance!

Ttry a reboot press & hold power button & menu button until
you see Apple Logo you will not lose any data
if after reset you still have the same problems.
i Would return iphone to Apple Store.
bsydd uk

Cannot connect to wifi, cannot change network settings [SOLVED]

Asus EeePC.
lspci -k shows
Broadcom Corporation BCM4313 adapter is the hardware, and appears to be working. Kernel driver in use is bcma-pci-bridge
In Gnome, Wi-Fi status shows "not connected"
"Select Network" shows a list of available APs, I click on ours which is set up as WPA2 PSK. Click Connect. Nothing happens. At all, no dialog for password, no attempt to connect seems to be processed by the computer. This happens with open networks as well (coffee shop or whatever). Click connect but nothing further happens.
From the applet I can't even seem to be able to "Turn off" the WiFi at all.
From within Wi-Fi settings in the applet, I can see a list of available access points but clicking on them does nothing. There is no available way for any user input, although I can click the toggle to turn off Wi-Fi from within there.
I can't forget networks in my history here either: click "History" and I can see a long list of previous networks. I can check box for them all and say "forget" but then they're back when I open the history again.
So it seems like my NetworkManager is just simply not working. Can't change the current state of "not connected" to anything at all.
When I attempt to connect using Wifi-menu I get:
Successfully initialized wpa_supplicant
>WPA Authentication/Association Failed {FAIL}
When I attempt to connect to any network. It never asks for password.
Gnome-Keyring is installed.
Netctl is NOT installed.
NetworkManager is installed and running according to systemctl
I've been running this Arch install on this machine for two years. This is not a new install problem. No hardware can be changed on this machine, so it's not hardware related (unless the wireless device itself crapped out).
Possibly related, I cannot shutdown the machine from within Gnome. I have to "sudo shutdown -h now" from a terminal. Seems to hibernate/sleep properly when the lid is closed though.
All of the results of searching on this indicate usually the problem is multiple network config softwares installed at the same time, like netctl and networkmanager together. Or not having a keyring manager installed That is not the case here unless it is one of those that is broken, but they don't seem to be.
I have no access to any wired connection at the moment at all, so I can't download anything to this computer at the moment. There's gotta be a way to get wifi working again, as it was just working last week. Haven't even done a pacman upgrade between when it last worked and when it stopped working.
Last edited by hooya (2014-12-02 15:20:20)

I did mention the hardware is a Broadcom BCM4313
It may have been an issue with the Broadcom not working with iw. Not sure, as I haven't really changed things on this machine much (it's my wife's and I regularly update it but don't fuss with it much beyond "get it to work"). Like I said, the install is 2 years old, so compatibility may have even changed since I initially set it up.
I'm currently at work and without direct access to the computer in question. So I'll get those results later tonight.
Last edited by hooya (2014-11-03 19:02:03)

Printing settings - printing large document

Sorry if this is a simple question.
I have converted a word document which contains diagrams (enhanced metafiles converted from MS Visio), It is a 76 page document, which I converted to PDF using PDF995 (only have Adobe reader).
I tried to print the pdf but when it gets to the first page with a diagram on it, the printing gets stuck.
The printer setting 'Page Scaling' was 'Shrink to Printable Area', I changed that to 'Fit to Printable Area', and although very slow the printing did work.
My main point is, I need to send this pdf to senior managment, will they have the same issues when they try to print the pdf if their default setting is 'Shrink rather than Fit.
Or is there something I can do to the images in the orginal document to avoid this issue in the first place.
Sorry if this is an obvious question , but I would appreciate any help.
Regards

See *Printing 2 sided (duplexing) if your printer does not have the feature* :
http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=181&mforum=iworktips ntrick
Peter

How can I change default settings for font and size?

How can I change my default font and size in pages?

hi Ben,
I found two files called AdobeDreamweaverSettingsPrefs (.xml and.tmp)
I removed them , emptied trash and restarted dreamweaver but the font stacks are sill missing.
thank you for your suggestion,
christos

TS4002 iCloud not working in Apple Mail - cannot change server settings as they are greyed

I have been having some issues with Apple Mail for a while - constantly being asked for passwords, etc. Then some days my iCloud mail will not work at all. It then magically comes back to life after a day offline. This has been happening regularly since the move from Mobile Me to iCloud.
I have read a few threads about Keychain, etc, but so far nothing I have tried has worked.
Any suggestions?

Luke:
Sorry that I cannot give you an answer. I am having the same problem. I have the correct exchange settings. I even turn off autodiscovery and set the external and internal servers to the same settings. Mail partially works, but it will "forget" older email items when they are still in an inbox. This is NOT an issue with iOS, so I think there is a bug in the Mail program. I am still searching for an answer as well. Right now I am resorting to exchange webmail on my mac. This seems to be only a mail problem. My calendar and tasks sync fine.

Cannot change codec settings for Quicktime export?

I have Quicktime installed, and it shows up as an Export option in Premiere Pro. However the options are extremely limited. Under the Video tab, there is a button for "Codec Settings" but it is greyed out. You can't choose whether you want CBR or VBR. Under the Audio tab, there is also a "Codec Settings" tab, but it too is greyed out. I can't even change the bitrate settings for AAC audio. Actually, it doesn't even tell you what bitrate it's exporting at, let alone let you change it.
Does anyone know what the problem is?

Possibly.
Some codecs have settings and some don't. If you pick one off of the list that has settings, you will have more success at changing parameters.
First things first. Does your list of codecs look something like this? If so, select the appropriate codec for your needs and see if it has options. None of the Quicktime exports has the option of changing from CBR to VBR as far as I can tell and to be honest I don't know which is being used. You didn't say if you were on a Mac or a PC but if you are on a PC you might consider using an H.264 export instead.

Macbook locked. Cannot change security settings

I have a macbook that is password locked (we can't remember the password) and the security setup will not let me create an admin account to change users and / or settings. How can I rebuild the computer to eliminate the user and change the security settings? I can get to settings as long as I don't shut down the computer, but I can't change anything without a password. So far I have been leaving in sleep mode which does not require me to enter the password.

You can get replacement System Install & Restore CD/DVDs from Apple's Customer Support - in the US, (800) 767-2775 - for a nominal S&H fee. You'll need to have the model and/or serial number of your Mac available.
If you're not in the US, you may need to go through the regional Apple Store that serves your location to find the contact number. Here's a list of links to all of those - http://store.apple.com/Catalog/US/Images/intlstoreroutingpage.html Another resource: International Support Phone #s.
can I boot from dvd and rebuild the computer?
I don't see how, since you stated you do not have them.

I cannot connect after upgrading Firefox. I work in corporate environment and cannot change security settings. Why this feature was not tested before upgrading to current version?

I cannot connect to ANY web sites (for example, yahoo, google, etc.

[https://support.mozilla.org/en-US/kb/Cannot%20connect%20after%20upgrading%20Firefox Cannot connect after upgrading Firefox]
see also [https://support.mozilla.org/en-US/kb/Firewalls Firewalls]
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

Cannot change print settings, print on foto size

Similar Messages

Maybe you are looking for