CANNOT CHANGE QUALITY PRESETS

Captured video is 1920x1080p, AVCHD format, using Adobe Premiere pro CS5 and Encore CS5, win 7 computer. Used Adobe dynamic link to get edited source into Encore. It uses quality presets 720x480, 29.97fps. I edit and build in Encore which results in a 4x3 DVD. Encore will not let me change the presets to a widescreen setting. When I select edit quality presets, MPEG2-DVD. & widescreen, OK... Encore just hangs. This is my first experience with Encore in a new turnkey computer. Could it possibly be a faulty software installation?
Thanks..... Gordon

You might want to check the interprete footage.
Best is not use DL as it reverses the fields for DVD. Export directly from Premiere then import these files into Encore. Make menu and burn to disk.

Similar Messages

How do I get CS4 Change Quality Presets to be used and remove black bars?

In Encore CS4 I CAN change the quality preset to what I want, but then when I go back to the project it does not stick. I tried to get to transcode settings, but they are greyed out. There does not seem to be a way to "USE" the quality preset I have saved!
This is a single video clip that I sent to Encore from Premier Pro CS4 so I could make DVD and BD's. However it seems I am unable to make a DVD at 4 Mbps (so I can combine this Premier Pro Project with another on a single DVD) no matter what I try. Also I notice the BD I made was not m2v like I am used to in CS3, and therefore are not sure I can combine it with a menu and another clip on a single BD as I have done numerous times in CS3 Encore.
I also notice as I look at preview, and then also when a made a default setting DVD that there are black bars on either side of the picture. This was a 1440X1080 60i project in Premier Pro CS3 and I am desireing to make ait a 1920 X 1080 DVD.
Neither of these were problems in Premier Pro CS3 and I am thinking the way around this is to spend the day or two and redo the project in CS3. I have done many projects successfully in CS3 and mistakenly thought I could just pick up the project in CS4 and be successful again. If anyone knows how to resolve these in CS4, it would save this extra work, if not, I will join the crowd with CS4 "issues" and go back to CS3.

First, on the black bars. I do not want them at all. I cannnot post a screenshot now as
file attachments are turned off temporarily, but they are about 5% on either side. Totally unacceptable especially when in CS3 when exported to Encore there are NO black bars either visible in Encore or in the resulting DVD's
On the options and is the preset saved. I can close Encore and open it afresh and find the preset that I saved listed in the dropdown of presets with the name I saved it as and all the settings the way I want them.
On the issue of Transcode settings when selecting the resource... When I select the resource in the Project panel, or in the Timeline tab, the Transcode settings is greyed out. I have consulted the help screens and forums for various ways to change the transcode settings and none of the suggested ways work.
It looks like my CS4 install does not work the way yours does. I am about to completely unistall CS4 and CS3 and all other Adobe products and try a fresh reinstall to see if that works. Most likely I will simply reinstall CS#, since that works, and abandon CS4 for now as I am getting way behind on my work, and know I can finish with CS3. I have also heard form others that Sony Vegas is really solid and does not have all these weird bugs such as seen in CS4 and CS5, and is a much less bloated product and does the encodings faster. Since it is also less expensive, this seems too good to be true, but work a trial. So first rip every Adobe product off my PC and format the HD and start fress with JUST CS3 and get my work done. Then try Vegas to see if it is as good as my buddies say, if so bye bye Adobe!

Cannot change "capture presets"

I try to duplicate in "audio/video settings" preferences the "capture presets" and FCP will not let me. they are locked. I can change all the other presets like sequence.
is there a way to unlock that so I can duplicate it and make changes.
i am using FCP 6.0.5
thanks
Love
Denny

Duplicate the preset (make a copy) then it is editable.
x

Cannot change Print Presets in iPhoto 08

Although I have saved multiple printing presets for other applications, in iPhoto 08 only "Standard" is available. This holds for all user accounts. Any way to correct this?
The problem is that "standard" prints on standard paper for my ink jet. Photos are therefore printed in low res.

Try the simple fix: delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your User/Library/Preferences folder, launch iPhoto and try again.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier versions) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. There are versions that are compatible with iPhoto 5, 6, 7 and 8 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
NOTE: The new rebuild option in iPhoto 09 (v. 8.0.2), Rebuild the iPhoto Library Database from automatic backup" makes this tip obsolete.

Is changing Edit Quality Presets nescessary?

Hi,
It was such a long time that I used Encore, and that was some versions ago. Hopefully you can help me answer this simple (?) question:
What are the quality presets for?
The thing is, I forgot to choose a preset before I burnt out two copies, thus the default setting was set to blueray instead of dvd (CBR, high quality) that I wanted. The dvd plays fine on both computers and on the dvd-player for the TV, and of course it is impossible for it to be anything else but a dvd. So, do I even need to change the quality presets for it to work?
I use Encore CS4 and the movie is PAL Widescreen. I imported an avi and let Encore do the encoding. I also set it to "one copy allowed" option, later I heard this can also cause compatibilty problems.
Should I burn out two new copies or can I send the ones I have got to the customer?
Many thanks!
/Helena

This is really just to let you know that someone is reading... 'cause I can't answer
I do hobbyist home video work, and I always just export an AVI from PPro3 and let Encore do all the transcoding work with the authoring
As far as I know, the quality presets "mostly" have to do with how the encoder (I use the default 2 pass) handles scenes with lots of motion... which are the hardest to do well so they view without "motion artifacts"
Hopefully, someone with more knowledge will come along with a better answer
If your current DVD plays well, on more than one brand/model player, I wouldn't do it over

Impossible to keep the changes in "Edit Quality Preset"

Hi,
My Movie is a typical HD movie from a Panasonic Camera --> 1920x1080i (H264)
However in my Encore Blu-Ray project, default settings are strangely set to Mpeg2 Blu-Ray at 1280x720
The Video lasts 30 minutes and I also have a slideshow.
-->the Blu-Ray generated with this has a very low quality (only 7GB when it could size 25GB...)...even if when played it seems to be in 1920x1080 and at a variable rate around 20 Mbits/s
I tried to "Edit Quality Preset" : Blu-Ray H264, 1920x1080... and I save the preset. Then I click on the "OK" button and...nothing has changed.
If I go again on "Edit Quality Preset", it is back to the same absurds settings.
1)Why the settings are not really saved
2)How can I improve quality to size 25GB
Thank you.

1) After you edit the quality presets (Modify, name, save), you must apply that modified preset to your asset. It is a two step process. You describe only one "ok," so I think you have not applied the preset to the asset.
You select the preset (including your modified one) in the "Transcode Settings" panel, not the "Edit Quality Presets" Panel.
That should help you get the quality you are looking for.
Note that slideshow quality is determined by the default transcode for the project when set to bluray.

Preview - Print system dialog extension - not loading and I cannot change the quality and media of printing

So whenever I try to print using Preview, I get the following error -
"Print system dialog extension could not be loaded because it has not been updated to run in this application's secure environment"
I cannot select quality and media.
Pls see inserted image for more clarity.

Unfortunately there is no later version of driver for your iP1700. The 10.51.1 version you have, which was released to support Mac OS X 10.7, was the last version that Canon released.
Checking the supported printers list for the Gutenprint driver package, which is an alternate suite of drivers supporting many different vendors, the iP1700 is also missing from the list. But it is listed as a supported model with the PrintFab driver package, however there is a cost involved in obtaining PrintFab.
Note that your issue is caused by sandboxing and there are some who have relaxed the security on their Mac by changing the sandboxing function, which is not really recommended. Given the iP1700 was released in 2006 and inks for this printer will soon become harder to obtain then I would suggest you look at getting a new printer.

Verify: Cannot change sequence settings

So I just want to be sure that I understand this:
I cannot change the details of the sequence presets in FCE HD. Correct?
For example, I can choose the 'AIC 720p30' sequence preset, but I cannot change 30, to say 25?
If I have an existing clip (AIC codec, 1280x720 @ 25 fps) there is no way for me to bring this into FCE without the software rendering it (thus reducing the quality of the existing clip).
I just want to be sure I understand this correctly. I am very surprised that I cannot define sequence presets myself.
Thank you for any clarification you might provide.
BT

Thank you Tom - I really appreciate your response!!
I'm a software developer and I can't tell you how surprised I was when I discovered this limitation. So I decided to try to understand how these presets were defined by FCE.
It is actually very easy (if you are technically inclined) to create your own presets in FCE.
1) Find the FCE HD application in your Finder
2) Right-click on this icon and select "Show Package Contents"
3) Naviate to Contents/Resources/English.lproj/Final Cut Express Settings/Hardware Settings
Inside this directory you will find *.fcpre files that define the presets for FCE HD.
I am not going to explain how to modify these files but those among you who understand file formats should easily be able to create your own presets (it took me about 15 minutes to create a 720p25 preset).
-BT
PS: Do *NOT* attempt this if you don't know what you are doing. At an absolute minimum, make a copy of FCE before you start mucking around - if you mess something up FCE will fail to launch.

Cannot change size of picture (in Ko) when saving with Preview

Hello all,
I need your help please.
When I modify a picture with Preview, like resize it for example, then I want to save the picture, I cannot change the size in Ko like I used to be able to with Snow Leopard.
Before, in the "Save as" menu, there was an arrow to decrease or increase the "weight" in Ko of the picture. This arrow is still there, but it does not show the number of the actual weight of the picture anymore (is it 400 ko, or 500 ko, or 600 ko, etc...).
Anyone has the same problem ?

I tried the steps you mentioned and found that this issue is also present in Previous versions as in PSE 10 also.
I will suggest you to check "Convert Files to" check box and then select "JPEG Max Quality" from corresponding drop down in order to maintain the quality of your JPEG image.
You can do it specially in case you are processing JPEG files and your image quality will remain same.
Hope this will help you.

Lync Response Group Manager - cannot change opening hours

Hi all
I've run into an odd problem with Lync Response Groups with Lync 2013 Server. Just wondering if anyone has seen this before or knows of a solution. I've searched around but can't find any reference to this particular problem.
Response supervisors who are defined in the workflow and are a member of the AD group CSResponseGroupManager cannot change working hours for their response group from a custom schedule to a preset in the web interface.
If the workflow is already set to preset they can switch between existing presets, and they can switch from preset to custom. But once it has been set to custom they cannot change it back to preset.
They can select to do so but when they click Save they receive an error on the page saying "The term 'Remove-CsRgsHoursOfBusiness' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the name,
or if a path was included, verify that the path is correct and try again."
I don't believe this is by design, why would you want a workflow manager to be able to switch between presets or to custom but not back again?
If they are a member of CSResponseGroupAdministrator this works, however this is not really a solution as members of this group can edit all workflows and we don't want the managers of a workflow for one department able to access the workflows of another.
Any information greatly appreciated.

Hi
I had to abondon working on this for a while as we only had 1 Response Group in place, it wasn't too much hassle for me to do these changes myself.
However we now have about 6 Response Groups. All are managed and have a user listed as manager in the workflow, that user is also in the CSResponseGroupManager AD user group.
As previously described they can change the opening hours from between existing presets, and from preset to custom, but attempting to change back to preset from custom causes the error given previously.
This does not occur if the user is a member of CSResponseGroupAdministrator, however putting our Response Group managers in this group is not appropriate as it gives them access to all Response Groups not just their own.
Is it possible the error is due to the fact that the CSResponseGroupManager group is not giving them permission to the Remove-CSRGSHoursofBusiness cmdlet, I think PowerShell tells you a cmdlet doesn't exist if you don't have permissions to use it?

Help! I have a new iPhone 5s. My husband just lost his 4s, so I want to give him mine. Want to use same Apple ID so we both have access to itunes/apps purchases. Want to separate contacts, messages, mail, etc. I cannot change iCloud address.

Help! I have a new iPhone 5s. My husband just lost his 4s, so I want to give him my 4s. We want to use same Apple ID so we both have access to itunes/apps purchases. Want to separate contacts, messages, mail, etc. I cannot change iCloud address on 4s iPhone. Also, when I tried to change iMessage I got a message that if I deleted my id (which seemed to be the only way to get my husband's I'd there), I would not be able to receive iMessages on any device.
Would someone kindly tell me how to set up th 4s for my husband so that we can keep our info separate? It would be most appreciated! Thanks!!

Hey Fagen!
You will want to see the following article for guidance on achieving the result you wish to achieve:
What to do before selling or giving away your iPhone, iPad, or iPod touch
http://support.apple.com/kb/ht5661
I would just follow the instructions from this article to give your unused 4s to your spouse. Since you have already started using your 5s, you will still be receiving iMessages on that phone and will have no need to receive them on a device that has been replaced. Thanks for coming to the Apple Support Communities!
Cheers,
Braden

For some reason, I cannot change my desktop background no matter how many times I delete the "active" folder. It's as if it's locked. Any ideas how I can fix it?

For some reason, I cannot change my desktop background no matter how many times I delete the "active" folder. It's as if it's locked. Any ideas how I can fix it?

Yes it sounds like you have a corrupted preference file.
The setting you make in individual programs get saved to a Preference file in your Users/Library/Preferences folder.
All you have to do is drag out the old file to the desktop, reboot and load the program and the preference file gets rebuilt without your preferences which you reset.
For your case I beleive the preference file is
com.apple.desktop.plist

Hi i cannot change the brightness on my late 2011 macbook pro.

Hi i cannot change the brightness on my late 2011 macbook pro. It is stuck on the lowest level in which i can't view the screen without a flash light. Please i need help how to solve this. I was on my computer when i checked the back which it was really dusty, i tried unscrewing the bottom however some screws were too tight so i took it upon myself and got a rod and startedremoving the dust off the vents and i may have clicked something as i closed the lid on the macbook i could hear the sounds still from the film but the lid was closed as i opened it back up the brightness was on low but sounds were still playing. All the buttons work , all of the F keys, apart from the brightnes keys. I can shine a tourch on the screen and see the display but the brightness will not change but i can see when i click the brightness it says it changes. I have connected it to a spare tv i have via hdmi and i really need help as this is my primary computer and i need it for work when going away. Thank you

Try SMC and PRAM resets:
http://support.apple.com/kb/ht3964
http://support.apple.com/kb/ht1379
Ciao.

Cannot change my printer preferences

Dear Hp technicians:
Hi I'm from Mexico and I just loged in to my hp e-print center and it took me here. My problem is I find it really difficult to log in from my country coz' hp connected doesn't work, it simply just don't let my Log in. I found that visiting hp connected-uk is the only way to log in. But then, I'm loged in, but I cannot change my printer preference coz' the button doesn't exist, the one that used to say "Change setting" is now just simple text. How can I go back to e-print center instead of HP connected..... Please this is driving me crazy!
I need your help

Hi there, if you've updated your ePrintCenter account to HP Connected you can't revert back. Check out this thread for more information on the change from ePC to HP Connected http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile-Printing-and-ePrintCenter/HP-Connected-Support...
Can you reply with a screenshot showing exactly what it is you're trying to change? Is it a setting of a printer in the Device tab or is it something in the "Settings" dropdown menu at the top right of the screen below?
If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
I am an HP employee.

I cannot change the value in about:newtab from "newtab" to "blank." The dialog is displayed but when I click Ok, the value is not changed.

I cannot change the value in about:newtab from "newtab" to "blank." The dialog is displayed but when I click Ok, the value is not changed.
===Answer===
Comment on usual method and solution, by a forum Moderator.
As long as there are no confounding factors, such as certain extensions, or a user.jsfile the procedure is as follows
# Open a new tab and type "about:config" in the address bar.
# In the Search bar type: "newtab"
# Locate and double click "browser.newtab.url"
# In the "Enter String Value" box change "'''about:newtab'''" to "'''about:blank'''" and click OK.
# Verify that the value has changed and now all new tabs will be blank.
See post under by ''pirate048'' [/questions/976589?page=2#answer-509482] ~J99

Have to say that I rather agree with Mark..all we want is a simple, unadorned clean page that doe not track and show usage!! WHY NOT!! Is it too simple for developers..we aren't all (nor do we want to be!) software experts! Come on Mozilla..tidy up and clean up..it might be a quicker programme too!!

CANNOT CHANGE QUALITY PRESETS

Similar Messages

Maybe you are looking for