Cannot change RD Licensing server mode to 'Per Device'

Hello
Thanks for reading my question.
I have a window server 2012 R2, I have installed the remote desk top service and the RD Licensing Server.
When I change the licensing mode in the "Edit Deployment Properties" dialog -> RD Licensing, I got an error as following on the top of the dialog:
And I search on the internet, how to change the licensing mode:
1. I have tried to change the group policy:
"Computer Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Licensing"
2. I have tried to change the registry key, and reboot my server:
"HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Terminal Server\RCM\LicensingCore"
After above 2 changes, when I open "RD Licensing Diagnoser", it stills show my licensing mode: Per User.
So, how can I change my licensing mode to "Per Device"? Any idea will be helpful
(By the way, I am a normal user in the domain, I am not a administrator of my domain control, I think Per Device CAL doesn't require me to be an domain control administrator)
Thanks very much

Hi,
How did you install the Remote Desktop Services? Standard Deployment or Quick Start?
Meanwhile, please try the following PowerShell command to set the License Mode.
Set-RDLicenseConfiguration -Mode PerUser
Hope this helps.
Jeremy Wu
TechNet Community Support

Similar Messages

Administrator cannot change printer properties on "Advanced" tab from "Devices and Printers" on Windows Server 2012 R2

Hello, dear Colleagues.
User with administrators rights cannot change printer properties on "Advanced" tab from "Devices and Printers" on Windows Server 2012 R2.
If to launch "Devices and Printers" on server, all printer properties on "Advanced" tab are inactive (see screen below).
But I can change it manually with "Print Management". Features become active.
The main purpose - to uncheck "Enable advanced printing features" with powershell
scripts.
$erroractionpreference = "continue"
$colPrinters = Get-Wmiobject -Class win32_printer -computername print_server -Filter "Name like 'printer1' or Name like 'printer2' or Name like 'printer3' or Name like 'printer4' or Name like 'printer5' or Name like 'printer6'" # get printers on server and filter with names
ForEach ($objPrinter in $colPrinters) { # get printer details from WMI
If ($objPrinter.RawOnly -ne "True") { # check that Advanced printing fetaures is turned on
Write-host $objPrinter.Name
Write-Host $objPrinter.RawOnly
$objPrinter.RawOnly = "True" # Untick and update the object in WMI
$objPrinter.Put()
It works on Windows 7 workstation, but does not on print server Windows Server 2012 R2 with error
Exception calling "Put" with "0" argument(s): "Generic failure "
At \\print_server\c$\DisableAdvancedPrintingFeatures.ps1:8 char:17
+ $objPrinter.Put()
+ ~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [], MethodInvocationException
+ FullyQualifiedErrorId : DotNetMethodException
Can you help me with that? Look like somethings with rights.
Thank you.

Hello, Alan
Morris.
Thanks for your reply.
I've tried to runs PS Script both locally and remotely, previously running Powershell ISE as Administrator.
I've noticed interesting thing - if to
check "Enable advanced printing features"
manually thru Print Management snap-in, script works fine. But, time to time after some manipulations on print server, this advanced feature returns to enabled state automatically by system, I think. In this case PS Script does not work. Next, if to disable
feature manually again (thru Print Management snap-in),
and enable manually again, PS Script will work. Very strange situation.
Thanks.

Cannot Change From 16 to 8 bits per channel

I have never had this happen before: I cannot change the image I am editing from 16 to 8 bits per channel. Also odd is when I click on an adjustment layer I have created it is not highlighted in blue.
Thanks

See if your in quick mask mode.
Icon at the bottom of the toolbox and look at the top left of the document window and see if it says quick mask.

Cannot change mail POP server

I upgraded to Yosemite and now I can't change POP server address in mail preferences because is grey.
Does anyone have the same problem?

After Two weeks our IT figured out why the iphone would not push through emails. This happened years ago when we had the Treo Smart Phone. It's an email capacity issue.
This Issue has to do with the amount of emails sitting on the web mail. Our company holds every past email on the webmail, this is thousands of emails, let's put it this way, in one day I alone receive over 200 hundred emails. When the phone tries to retrieve current emails it is also trying to push through all the emails on the webmail which some phones are incapable of doing over a certain capacity. So you will receive the message "CANNOT GET MAIL, The connection to the server failed".
I.T. resolved this issue by backing up all emails on the Exchange server for each user. Then Moved all emails off the webmail to a local PC leaving only the current emails sitting in webmail. Now our IT has to make sure old emails are moved from the webmail weekly, keeping emails in the webmail to a minimum. Now some companies might not be facing any issues because they probably automatically archive old emails on the webmail. Our IT did not archive old emails from webmail because they thought they would give employees the capability of looking at old emails from webmail not only their PC. Since this issue, IT found that employees were not accessing webmail for old emails, they were logging into their office PCs to view old emails, so not having old emails on the webmail is not an issue for our company. And resolving the issue in this manner worked for us. Not sure if it's a solution for everyone.
P.S. This also effected Calendars, notes, contacts,etc since we resolved the email exchange "Push" issue, all other features are synching too.

W32tm always on "Local CMOS clock" on virtual domain controller - cannot change to NTP server

The domain controller (Server 2012R2) is hosted on Hyper-V (Server 2012R2). It is a PDC.
- firewall disabled
- cleaned up w32tm:
net stop w32time
w32tm /unregister
w32tm /register
net start w32time
- applied ifixit from http://support.microsoft.com/kb/816042 to enable external ntp server de.pool.ntp.org
- disabled
VMICTimeProvider in registry
(HKLM\SYSTEM\CurrentControlSet\Services\W32Time\TimeProviders\VMICTimeProvider\Enabled = 0)
I can manually query the ntp server de.pool.ntp.org:
w32tm /stripchart /computer:de.pool.ntp.org /samples:5 /dataonly
de.pool.ntp.org wird verfolgt [131.188.3.221:123].
5 Proben werden gesammelt.
Es ist 24.04.2014 10:07:36.
10:07:36, +00.0115379s
10:07:38, -00.0025048s
10:07:40, -00.0008595s
10:07:42, -00.0010477s
10:07:44, -00.0014516s
But still, w32tm does NOT query the ntp server:
PS C:\Windows\system32> w32tm /query /source
Local CMOS clock
rosch

Hi rosch,
Based on your description, please check if disable the "Time synchronization" Integration service. Please refer
to the following operation.
In Hyper-V Manager, right click the DC and select “Settings…”.
In the left panel of Settings, navigate to Integration Services and click it.
Then in the right panel, please uncheck Time synchronization.
By the way, please check if can connect to the time server and UDP port was opened for NTP.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

Cannot change graphics mode/Old preference pane

Just received my new Macbook Pro 2.53. Loaded up just great was able to use all the features, but after transferring all of my old data via ethernet I cannot change the graphics card mode! I no longer have the option to. I have the OLD 'Energy Saver' preference pane! I do not even have the larger graphics card under the system profiler.
Any ideas?
Running build 10.5.5 9F2114

After a lengthy call with a rep at applecare, checking this, sending that. He had me remove the battery, unplug the wall outlet and hold the power button for 7 seconds. Popped the battery back in, plugged in the AC and it's back!
It wasn't so much I had an "old energy saver" pane, but rather the new one wasn't recognizing the 2nd video card.

Hi I am facing issue with Remote Desktop Licensing, it is not showing the original available licenses decreasing on the RD Licensing server

When i added our license servers to one of the clients for RDS, and we three log in, i am seeing issued shows three now but i am still not seeing the total license count decreasing as we have licenses on per Device basis and have 200 licenses for
our 2012 server. In review configuration, everything is green.
Why am i not seeing the decrease and why is there a built-in overuse option coming up and retail purchase count not going down?
i wanted to paste an image but it says:
Body text cannot contain images or links until we are able to verify your account.

Hi,
1. What version is your RDSH server? Is it 2012/2012 R2 or 2008 R2 or something else?
2. If your RDSH is 2012/2012 R2, have you set the licensing mode to Per Device in RDS Deployment Properties? In addition, is the RDSH server part of a collection?
3. If your RDSH is 2008 R2, did you set the licensing mode to Per Device in RD Session Host Configuration (tsconfig.msc) or via group policy?
4. If you could post a ling to the screenshot on one of the image sharing sites we could view it from there. If not it would be helpful if you could provide the precise name of the pool (you need to make the column wider in RD Licensing) that the RDS
CALs are being issued from as well as the precise name of the pool for your purchased RDS CALs. The count columns would be helpful as well.
5. In the Event Viewer\ Applications and Services Logs\ Microsoft\ Windows\ TerminalServices-Licensing log on your RD Licensing server there should be events when licenses are issued. Please provide the event id and precise text of these events.
Thanks.
-TP

RD Licensing server not issue license

Hi
I'm building Windows Server 2012 R2 VDI infrastructure using RDVH that will host Personal Collection Type. I Installed RDS Licensing server and added Windows Server 2012 -RDS Per Device CAL. When user connects to his VM it does not consume RDS Per Device CAL.
Any idea why?

Thanks for your answers
I uploaded picture with the status of my licensing server:
https://onedrive.live.com/redir?resid=F265A2FD38D6565E!122&authkey=!ADYEwwRWftTt_H4&v=3&ithint=photo%2c.jpg
I can't use RD LIcense Diagnoser because we don't use RDSH in this implementation, only RD Virtualization Host.
Other roles are implememented RD Web, RD Gateway, RD Connection Broker.
I also ran Get-RDLicenseConfiguration on RDCB and get valid output where my mode is PerDevice and fqdn addresses of my license servers

Per Device licenses question

Hi,
I have a question about per Device licenses in RDS 2012.
Let say 100 licenses are added to License Server. Issued shows 80.
When issued licenses count will reach 100. Could 20 new computers access RDS in case that 20 from initial 100 will not connected?
Are the licenses concurrent?
Thanks
--- When you hit a wrong note its the next note that makes it good or bad. --- Miles Davis

Here is the link explaining the Revocation acton (and etc):
"After you have revoked the RDS Per Device CAL, that RDS Per Device CAL is immediately available to be issued to another client computer or device."
http://technet.microsoft.com/en-ca/library/cc732416.aspx
extracted:A permanent RDS Per Device CAL issued by a license server is configured to automatically expire after a random period between 52 and 89 days, at which time the RDS Per
Device CAL returns to the pool of available RDS Per Device CALs on the license server.
In some circumstances, you might want or need to return an RDS Per Device CAL that has been issued back to the available pool on the license server before the automatic expiration period has been reached. For example, you might want to do this if the
client computer or device is no longer a part of your environment.
You can revoke an RDS Per Device CAL by using the Remote Desktop Licensing Manager tool.
Important
You can only revoke an RDS Per Device CAL. You cannot revoke an RDS Per User CAL.
After you have revoked the RDS Per Device CAL, that RDS Per Device CAL is immediately available to be issued to another client computer or device. Revocation is not a substitute for ensuring that you have enough RDS Per Device CALs to support
your environment.
You can only revoke up to twenty percent of the number of RDS Per Device CALs of a particular version installed on your license server. For example, if there are 100 Windows Server 2003 TS Per Device CALs installed on the license server, you
can only have 20 of those Windows Server 2003 TS Per Device CALs revoked at any given time. If you also have 200 Windows Server 2008 R2 RDS Per Device CALs installed on the license server, you can revoke up to 40 of those Windows
Server 2008 R2 RDS Per Device CALs in addition to the Windows Server 2003 TS Per Device CALs that you have revoked.
--- When you hit a wrong note its the next note that makes it good or bad. --- Miles Davis

Can I change the smtp server with Yahoo push account?

My yahoo email account will send and receive over EDGE using the default yahoo mail settings. On my home Cox internet WiFi network I can retrieve messages but cannot send. When sending it says it was sent and makes the "swooshing" mail sent sound, but the message disappears. It does not appear in the "sent" folder or "drafts" folder either. No error message is returned.
I suspect this is related to Cox blocking the smtp server, but the iPhone does not allow me to change the smtp settings on the default yahoo account. Does anyone know how to do this? I can set it up manually for POP access, but then I'm flooded with spam.

No, you cannot change the SMTP server on the Yahoo push account.
Yahoo push only works if you configure your account using the Yahoo! Mail shortcut on the iPhone, and that shortcut does not allow for ANY customization.

Why timesten is slow in client/server mode

i am testing Timesten client/server mode and find that
it is to slow.
when using dircet mode, timesten can precoss about 40000 query pre second
but when change to client/ server mode
it can only process 1500 query pre second.
here is my config and test sql.
[Test_tt702]
Driver=//u01/oracle/TimesTen/tt70/lib/libtten.a
DataStore=//u01/oracle/TimesTen/tt70/info/DemoDataStore/Test_tt702
DatabaseCharacterSet=US7ASCII
TempSize=64
PermSize=250
Temporary=1
TypeMode=1
CREATE TABLE TEST999
A1 number NOT NULL PRIMARY KEY ,
A2 number,
A3 number
network card is 1000m,
query code:
PreparedStatement pSel = dbConn.prepareStatement("select a1,a2 from TEST999 where a1=?");
rs = null;
int a1=0;
int a2=0;
for(int i=0;i<80000 ;i++)
     pSel.setInt(1,i );
rs=pSel.executeQuery( );
if (rs.next()) {
     a1 = rs.getInt(1);
     a2 = rs.getInt(2);
     if( i%8000==0) {
     System.out.println("select "+ i +" res="+a1 +" time " + getTime_v2());
     rs.close();
direct mode time : 80000 query is 2 second
client/server mode in the same machine : 80000 query is 12 second
client/server mode in the different machine : 80000 query is 54 second
any one have idea about this?
is it the jdbc driver 's promble?

it is to be expected that there will be a big difference in performance between direct mode and client/server due to much greater overhead in client/server, especially if the client is on a different machine. However, the differences you are seeing here are larger than I would normally expect.
You say (I think) that the network is 1 GB, correct? What is the hardware spec of the test machine(s)? Have you tuned the O/S network stack for optimal performance?
Typically, for local client/server using the fastest IPC mode (shmipc) I expect performance of around 20-30% of direct mode and for remote client/server with a GB LAN I would expect performance of around 10-20% of direct mode.
Chris

Is this offer a fake or why cannot change my abo?

Is this offer a fake or why cannot change my abo?

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

Cannot change SQL 2008 R2 Service account from local System to any account

Windows 7 64 Bit Developer Edition of SQL Server 2008 R2
Successfully changed SQL Server Agent, SQL Server Reporting Services, SQL Analysis Services, SQL Server Integeration Services and SQL Full-Text Filter Daemon Launcher from Local System Account to Domain account. Howerver, I cannot change
the SQL Server Account. The SQL Server Configuration Manager generates the below error:
WMI Provider ERROR (in window title bar)
Big red X followed by "The parameter is incorrect. [0x80070057].
I have tried many things with no luck:
Tried using a different local administrator account
Tried putting the Domain account I want to change to in the local admin group
Tried adding the Domain account I want to change to in all of the SQL created local groups
I think im going to have to reinstall to change the account. What up!@!!
-thanks for any help in advance. Its probably something dumb i did or did not do.
scott

Please try:
Open SQL Server service's property dialog in SQL Server Configuration Manager.
Select "This account", and then click "Browser".
Enter you domain account and then click "Check Names"
Back to property dialog and input the password
Please let me know if the issue persists.
Best Regards
Alex Feng | Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Cannot change graphics card/Old preference pane

Just received my new Macbook Pro 2.53. Loaded up just great was able to use all the features, but after transferring all of my old data via ethernet I cannot change the graphics card mode! I no longer have the option to. I have the OLD 'Energy Saver' preference pane! I do not even have the larger graphics card under the system profiler.
Any ideas?
Running build 10.5.5 9F2114

After a lengthy call with a rep at applecare, checking this, sending that. He had me remove the battery, unplug the wall outlet and hold the power button for 7 seconds. Popped the battery back in, plugged in the AC and it's back!
It wasn't so much I had an "old energy saver" pane, but rather the new one wasn't recognizing the 2nd video card.

What is "ges enter server mode" wait event..

I cannot find 'ges enter server mode' wait event definition.
What is it?

10g onwards, Instance recovery is done in two phases. First phase scans the blocks to be recoverd and applied from rdo log files and the second phase actually does that.
In a RAC instance the during the instance recovery, first pass scan can be delayed by 300ms-1.5s waiting on GRD (Global resource directory). During that time SMAON enters the wait event which is called "ges enter server mode" .

Cannot change RD Licensing server mode to 'Per Device'

Similar Messages

Maybe you are looking for