Cannot change static IP address on MacBook pro
hi, I've got quite the dilemma. I used a 2WIRE134 modem and DSL with AT&T w/o problems a few years ago. Then changed to cable but kept the 2WIRE134. Moved to a different residence and AT&T came out to set up DSL with that same modem.
The technician had some "easy-to-fix" wiring issue in the closet where the phone wiring for the entire complex resides. When we got into my apartment, my 2008 MacBook Pro could not connect to the web via Wi-Fi. He had me enter a static IP address of 169.something.....but we had to then use an Ethernet cable to connect to the web.
My iPad2 connects just fine, but my Mac always hits the same static IP address on Wi-Fi and I have to use the Ethernet cable.....None of the Support Forum remedies have worked. I read that this is a somewhat common problem with the MacBook....
Help please ?
thankya
Then the thing to do is use
System prefereneces > Network > WiFi > (assist me) > Assistant...
... and set it up again from scratch, including a new "Location". This will give you a "clean slate" with no pre-conceived notions.
A "Location" is a basket of settings from all over the place that could be apllicable to using your Internet Connection when you are in a particular place. Apple intended you to have one for Home, one for Work, one for StarBux, etc. Just select the appropriate "Location" and bam, all your corrects settings take effect.
Similar Messages
-
After the latest update, all my apple products reverted to an old icloud account. As it no longer exists, I cannot get into it to delete it and add the correct id. How can I change this, especially on my Macbook pro? There is no p/w related to it and even though I tried to reset "password" it won't allow as the id does not exist, neither does the email associated with the old id. How do I switch it to a newer id?
It's all rather odd because the old account cannot 'no longer exist' - if you don't have the correct password you won't be able to get into it, but you can't actually delete an iCloud account from the server.
I'm afraid you will need the services of iCloud Support. If you currently happen to have AppleCare, either because you recently bought Apple hardware or have paid to extend the inititial period, you can contact them here:
http://www.apple.com/support/icloud/contact/
You will need the serial number of the covered hardware.
If you are not covered by AppleCare, then - in common with other free email services - there is no free support and you may be asked to pay a fee. -
How do I reset setting to default or change static IP address on HP Officejet Pro 8600 Premium printer?
Hi,Tap the right arrow and then tap the Setup icon.Tap the Network option and select Restore Network Defaults.Confirm any prompt to restore the default network settings, it will remove any manual IP configuration. If you are wirelessly connected to the network, select Wireless Setup Wizard and select your network to reconnect the printer wirelessly. Regards,Shlomi
-
I cannot print in color from my MacBook Pro
I cannot print in color from my MacBook Pro to my hpdeskjet 6122
hi FalconMom,
EWS stands for Embedded Web Server. You will be able to access the printer EWS if it is connected to the same network as your PC or notebook. Here are the instructions to connect to EWS.
Open the embedded Web server
You can access the embedded Web server via either the network or Wi-Fi Direct.
To open the embedded Web server via network
NOTE: The printer must be on a network and must have an IP address. The IP address for the
printer can be found by pressing the Wireless icon or by printing a network configuration page.
In a supported Web browser on your computer, type the IP address or hostname that has been assigned to the printer. For example, if the IP address is 192.168.0.12, type the following address into a Web browser:
http://192.168.0.12.
To open the embedded Web server using Wi-Fi Direct
From the Home screen, touch (Wireless) and then touch (Settings).
If the display shows that Wi-Fi Direct is Off, touch Wi-Fi Direct and then switch it on.
From your wireless computer, turn wireless on, search for and connect to the Wi-Fi Direct name,
for example: DIRECT-**- HP Officejet-5740 (where ** are the unique characters to identify your
printer). Enter the Wi-Fi Direct password when prompted.
In a supported Web browser on your computer, type the following address: http://192.168.223.1.
I am an HP employee, but I am speaking for myself. -
Someone changed the password to my macbook pro
Someone changed the password for my MacBook Pro---and as the administrator I cannot go in and change it back...or least cannot figure out how to do it. Is there some secret way to do it when blocked from the typical password change options?
Resetting or changing an account password:
http://support.apple.com/kb/HT1274 -
i cannot found iLife app on my macbook pro and when i want to buying it i cannot and i have this massage (These apps cannot be accepted by your Apple ID.These apps were already assigned to another Apple ID, and they will be available in that Apple ID's purchases list. If you don't have access to that AppleID and want to receive future updates, you will needto purchase the applications ) what i want to do now ? please tell me
Either use the Apple ID you used when you originally purchased the applications or you will have to purchase them using your Apple ID. If you did not have the other Apple ID, then you have the applications illegally or they were improperly included with a computer you purchased from someone else.
-
So in the last few days I’ve noticed that pressing my volume change keys actually isn’t changing the volume on my macbook pro at all. When I press the volume up or down keys, it makes the recognisable pop sound but stays at the same volume while the squares go up or down. I mute it but my computer still makes sound. It’s the same with the volume control up the top of the screen, too. I slide it up and down and it doesn’t change the volume at all. The only way I can change the volume is with my speakers or the program I’m in (iTunes, VLC etc). I restarted and it seems to be okay then I go to change it a couple minutes later and it’s back to not working again.
I’ve checked my settings- the “use all F1, F2, etc. keys as standard fuction keys” is not switched on, and I have tried a suggestion of moving the com.apple.systempreferences.plist file out of the library and onto the desktop and restarting and neither of those seem to make any difference whatsoever. I’ve tried to find online forums but the only suggestions I found were those two and they didn’t work.
I’m just annoyed because I usually have the worst luck with technology but my macbook had been going strong and I got it because of the apparent lack of things that could go wrong, but of course even if there is one thing that could go wrong it will happen to me.
Please help!You migh give resetting your NVRAM a try:
http://support.apple.com/kb/ht1379 -
i can't change the brightness on my macbook pro. i tried the buttons on the keyboard, went to settings and tried to do it from there, didn't work. i have restarted my computer as well and that didn't make a difference. please help.
Reset the PRAM and SMC.
Barry -
How do I change the name of my macbook pro?
How do I change the name of my macbook pro. My full name is listed on it and I want to change that. In the upper right hand corner it is correct but all that lists is my login name.
Mr. Pat, there are some people who still try to do that, but you are risking losing all your music, photos, email, etc. It is not for the faint of heart. This page, albeit published in 2003 by Dr. Smoke, is still pretty valid, IMHO:
http://thexlab.com/faqs/renamehomerecovery.html
Here's the opening copy:
Recover from renaming your Home folder
It is a grave mistake to rename your Home folder -- changing its file name from johnsmith toJohn, for example -- in an attempt to change the short name for your account when using Mac® OS X.
Here's a newer, last scary article from the Apple Knowledge Base:
http://support.apple.com/kb/HT1428viewlocale=en_US&locale=en_US -
I cannot eject a CD from my MacBook Pro. I tried restarting the computer and holding down the mouse and restarting it to no avail. On Finder, nothing is showing up on the CD Drive. Any ideas on how I can eject it?
How force eject disc: Apple Support Communities
Mac Mini: Eject DVD Apple Support Communities
https://www.macupdate.com/app/mac/49129/forceject-too
Get help with the slot-loading SuperDrive on your Mac computer - Apple Support -
i have change my hd in my macbook pro. I have no security copies and i know i´m going to lost all my information i have in iphone if i upgrade to 5, what to do? its possible to send first all the information i have in the iphone to the computer than upgrade him?
Hey barnsieno10,
Thanks for using Apple Support Communities.
Looks like sign in issue, This article is a great resource for the message you are receiving.
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/ts3970
Have a nice day,
Mario -
I had to change to a new Apple MacBook Pro. I deauthorized my old computer, authorized the new one and the only media that shows up are items with a cloud. Everything that was downloaded from a cd, including personal movie files, are missing. It's as if my former library is gone. How can I find it again? Or is this just Apples way of screwing with me?
No. Firewire and Ethernet are not the same. Ethernet would be used to connect the computers to your network. A Firewire cable is used to connect the computers directly. They are different ports.
The above shows what an Ethernet port and a Firewire 400 port look like.
These are the plugs used for FW800 on the left and FW400 on the right. -
Top right hand of task bar icons keep disappearing and coming back. I cannot click on any of them as they just go. Also I cannot take screenshots any more. Macbook pro 2007 OSX Snow Leopard. Anybody any idea what is occurring?
These Steps should resolve your issue
Step by Step to fix your Mac
If you don't have a backup of your data off the machine
Most commonly used backup methods
If you can't boot the machine and need to get data off it
Create a data recovery/undelete external boot drive
Your options for data recovery
My computer is dead, is my personal data lost?
Secure data removal
How do I securely delete data from the machine?
More:
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents#/ -
What is the cost of changing the case of my macbook pro?
What is the cost of changing the case of my macbook pro?
Replace both upper case and lower case? Do it yourself or pay someone to do it?
You can price it out yourself:
https://www.techrestore.com/mac/
http://www.dttservice.com
http://www.myservice.com/macbookpro.html
http://www.ifixit.com/Device/MacBook_Pro
http://www.PowerbookMedic.com -
Can i change the name of my macbook pro?
hi there i want to know if there is a way to change the name of my macbook pro.
my name is mohammed alqufidi and may mac is (shsh) so if u could help i will be thankfull.Open the Sharing pane of System Preferences and change it.
(73828)
Maybe you are looking for
-
Latest version of Itunes won't download latest version of ipod touch softwa
I have a macbook from April of 2008 which has the latest version of itunes 10.10.01. I have apps that i've purchased from the itunes store (including a $20 german-english translator that i DESPERATELY need for class). I recently restored my ipod to f
-
When I attempt to set up facetime it asks me to log in with my account. After doing this it takes me to a screen telling me to pick an email address to use. I only have one so it is set by default. After hitting next it takes me back to the login scr
-
User ID and password Popup in Client proxy
Hi Experts, I created a client proxy to consume a webservice.When i execute the proxy, it pops up for user id and password, i created one logiccal port also using tcode SOAMANAGER. during creation of the logical port, i entered teh user id adn passwo
-
Dynamic (session) language setting not working in external ITS v6.20
Hi everybody, We have upgraded from ITS 2.0 to 6.20 patchlevel 35. In the service (srvc) file following parameters have been set; ~languages tr, en ~language tr So we want our users to log on in Turkish (tr) language, but they have to be a
-
Firefox will not load and I cannot get it to restart even when reinstalling it. osx 10.8.3. i tried to install a new theme to toolbar and it crashed. I can't figure out what went wrong. please help. -ari