Cannot change the print margins when printing out my spreadsheet. Tried clicking on format and then Document but when I enter a number I always get " invalid number".

I cannot change the margins when printing out my spreadsheet. I clicked on the format then on document and got a entry box. But everytime I try entering a number to change the left margin ( tried .5 ) I get an " invalid number " response. I can print out the spreadsheet but always get a message telling me the margins may be too small and data may be clipped. Data doesn't get clipped but left part of the spreadsheet is right at the left side of the paper. Want to change the margin so I don't get that message.

Naming the spreadsheet app would do wonders for getting an answer.

Similar Messages

Hello, I have updated my iphone4s to iOS7 and now I cannot close any of my apps - I double click on button and they show but when I press hand hold the icons do not shake so i can delete them

Hello, I have updated my iphone4s to iOS7 and now I cannot close any of my apps - I double click on button and they show but when I press hand hold the icons do not shake so i can not delete them

You don't press and hold them. Just swipe up.

I changed the password to my itunes account. My apps start to updated and then stop I cannot figure out why

I changed my password for itunes and it won't update my apps. It starts to update and then stops. Can anyone help?

I changed the password using my phone.
I have not logged into my computer yet, but I will try that next. Thanks so much for the input and help.

I have a new Imac with OS Lion. When i use the apple migration tool to transfer from my PC to the Mac, it runs for two hours or so exchanging my pictures and address book, but when completed, I cannot locate anything on the Mac! Any suggestions?

I have a new IMAC with lion. When I use the migration tool from my PC to the new Mac, it takes about 2 hours to transfer my photos and address book, etc. However, when completed, I cannot locate any of the transfered material on the Mac! Any suggestions?

You have posted to the older PPC iMac forum. You need to poster to a newer iMac forum.
I suggest posting here:
https://discussions.apple.com/community/mac_os/mac_os_x_v10.7_lion?tagSet=1382
Complete list:
https://discussions.apple.com/docs/DOC-2463
Try double clicking on the harddrive icon on your desktop
You should get something like this.
On the left pane is a list of common places.
All the user data is in the /Users folder.
See the magnifying glass on the upper left of the screen. This is spotlight. Type in a file name.
Robert

I cannot change the persona on my laptop! I've tried, but the new persona only stays on while I'm online. It's not being saved or something. What's going on?

About a month or so ago, I did get a nasty piece of malware called SystemCheck on this laptop, but I believe I've gotten rid of it. God knows I've scanned the laptop a million times over and it's come up clean (using both Spybot and Malwarebytes).
Prior to this malware, I had no problem changing the persona and being able to keep the new one. Now I can't. Is this SystemCheck still haunting me?
Here are the specs for my Laptop:
XP-SP3; Compaq Evo N610c; 1.00 GB of RAM
I can't find any troubleshooting guide for this issue.

Hi DawnStorm,
You should look at the article [[Preferences are not saved]]. It could be the Firefox is just unable to write to the prefs file.
Hopefully this helps!

I suddenly have problems syncing my itouch. when i connect it to the computer, it shows that i still have all of my songs and playlists. But when i look on my itouch, it says i have no content in the music section. and when i try to sync it, there's error

I wanted to listen to some new music i added to my itouch, but when i looked, it said no content in the music section. So i connected to the computer and opened itunes. My device showed up and everything, my playlists and songs where still there, but my itouch still showed No Content. Then i tried to sync it, and there's always an error popping up, so now i have no idea what to do! I have too many songs to start over again! And the iTunes i am using now was not my original one because my old computer broke so i got a new computer and new iTunes, so this iTunes doesn't have all of my songs. i'm sick and tired of being afraid to update my itouch because it says it won't save my songs so when it updates my songs could be deleted. Could someone please help or tell me how to contact the Apple people?

iPod touches or any iDevices from Apple sync only to one computer. If you sync to a different computer, all your music will be replace with the music from the new computer's iTunes. If the music were purchased from iTunes, you can re-download them again otherwise the music on iPod touch will be deleted. Do you have iTunes backup?

Where is my text box in final cut pro? I cannot change the default text at all?

Hi, as the title says, I use a default final cut pro title or ending for a video and I cannot change the text, all youtube tutorials just show that you click on the text box, the boxes appear, and then to the right in the text window you literally just type and change it, which ive done several times before, but I just got a new mac, and now that is impossible to do, what can I do? I dont want to upload videos that say, TEXT GOES HERE

hey andy,
i think what you're gonna have to do is just hit command 4!
That should bring up the inspector where you can change the font!
From Kelly

HT1476 My phone was fully charged and while talkng, it went to a blank screen. It will not come back on. I have tried turning it off and back on, but it doesn't do anything, just keeps the blank screen.

While talking on the phone this morning, it was fully charged, the screen went blank and I could no longer use the phone. I tried turing it off and then on, but it still ghad a blank screen. I even tried charging the phone, but it still has a blank screen.

I am sorry to hear about your phone.
You could try connecting it to your laptop and see if itune recognises the phone.
If it does then make a backup of your phone.
You could then restore it and see if it helps.
It shouldn't be much of a problem if its a software issue but if something went wrong with the hardware then you might have to go to an Apple store.
Hope this helps

I cannot change the Printing Preferences on PSC2175. When I click preferences nothing happens.

I cannot change the Printing Preferences on my HP PSC2175. When I click it, a window appears and then disappers instantly. It cannot print Word documents properly (using Microsoft Office 2010) or PDF documents properly. It can print text perfectly well, but diagrams, text boxes, and grids do not print at all, and other times it prints only part of it. I am using Windows 7 32 bit. This started after upgrading from Vista.
This question was solved.
View Solution.

Hi,
Have you tried uninstalling and reinstalling your driver located within the Windows 7 operating system? As you probably are aware that HP didn't create a downloadable Windows 7 drivers. I would try uninstalling and reinstalling the driver.
Say Thanks by clicking the Kudos Star in the post that helped you. Please mark the post that solves your problem as Accepted Solution.
I am employed by HP

PageComposer Error - Cannot find the module necessary for printing C5051

Hi
Having some problems trying to setup a Windows 2008 R2 print server with shared Canon iR C5051 printer
I've created the printer, installed the 64 bit driver Canon iR-ADV C5045/5051 PCL6 v 20.90 and works fine for 64 bit Windows 7 clients, installed the 32 bit driver by selecting printer properties, sharing tab, additional drivers and selecting x86 and pointing to the 32 bit PCL driver. Driver installs fine on the print server without any errors.
Goto 32 bit client, add printer, select the shared printer from the printserver, printer installs Ok. When the user however tries to print, get the error:-
Canon PageComposer
Cannot find the module necessary for printing
Re-install the printer driver
I've done this countless times, any idea's on how to fix ?
Thanks

Where is the code you posted? Running in a separate project, I assume? Does that project have a dependency on the project containing the app module specified?
And just to check (although by default, JDev should do this for you)--the app module project has been compiled since adding the configuration, right? You need to check to make sure the config exists not only under Project/src, but under Project/classes.
Edited by: Avrom Roy-Faderman on Oct 6, 2008 2:02 PM
Oh, and BTW--I assume this is not a typical ADF application, right? In a standard ADF application, you would very rarely need to instantiate an application module in code like this; you could just let the data binding facility do it for you. The technique like the one you're using is most appropriate for purely programmatic, no-UI cases. (e.g., once I tried to implement an SMTP server backed by business components. That was an appropriate case for ditching databindings and doing the sort of thing you're doing, because it had no view layer (because it had no UI to render).

I'm trying to make a time sheet and include a grid, but I'm having a hard time figuring out how to print a full grid on my spreadsheet. There are options for shaded grids but I want a defined grid, and I have spent the last 2 hours looking for the answer

I'm trying to make a time sheet and include a grid, but I'm having a hard time figuring out how to print a full grid on my spreadsheet. There are options for shaded grids but I want a defined grid, and I have spent the last 2 hours looking for the answer. Any ideas?

Hi Cynthia,
Are you planning to have this table do any of the calculation, or is is to be used as the electronic equivalent of a sheet of paper with a grid printed on it—a place to record the data.
For your seven column table:
Are you using one or more rows at the top of the table to label the data below? If so, you might want this row (or these rows) to be set as Header Rows.
Are you using the leftmost column to label the rows? If so, you may want this column to be a Header column.
The default table supplied on the "Blank" templates contains one header row and one header column. If you need more (or fewer) Header rows or columns, select the table, then go Table (menu) > Header Rows > (choose the number you need). Repeat to set the number of Header Columns.
To make a seven column table from the table supplied by default, click on any cell in column H (The eighth column), and drag right to add more cells to the selection, until you get to the last column of the table. With these cells selected, Go Table > Delete Columns.
To make the remaining seven columns fit across a single page:
Go View > Show Print View to show the table as it would appear when printed to paper.
Select the table by clicking its icon in the Sheets List to the left (easy method), OR by carefully clicking on the outside boundary of the table itself (fiddley method).
With the table selected, you will see square white handles at each corner and at the middle of each side (including the top and bottom).
With the mouse, grab the handle in the middle of the right side of the table and drag right (or left) until the table just fits onto the width of the defined page.
With the table still selected, set the thickness and colour of the cell boundaries using the Gaphics Inspector (as described by Jerry), or using the Stroke, Thickness and Color Well controls in the Format bar above the working portion of the Window.
Regards,
Barry

I want to change the SSID of my printer

HP Officejet 6600
Win XP
I have been using this printer wirelessly for some time with no issue. I have recently expanded the wireless printing capabilities so we can print from our iPads and iPhones. We have two wifi spots; one for the printer called HP-Print-CC-OFFICEJET 6600 and the one for the house called NX-01. The issue is when I leave the house and come back, they (our iDevices) default to the printers network, the 'HP' one. I think it does it because it goes alphabetically. Since H comes before N, it always goes to it. The next thing I know is all of our devices are running off of cellular. This is not good, as we forget this happens and it goes unattended for some time.
So, what I want to do is change the SSID of the printer to something that starts after N alphabetically. The thing is, I can't find anywhere to do it! Well, I can, but when I follow it's directions it tells me to hook up the printer to the USB to establish a wireless connection. Hello, I've already done that!
Any help would be appreciated.

Hello Digital_Goonie,
That's a default thing. If you can't change it in the EWS, it can't be changed.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Will the penfailure be solved after changing the cartridges? Installing printer again did not help.

Hp Print Diagnnostic Utility detected 'Pen Failure' I tried reinstalling printer driver again, checked cartridges installation for correctness, cleaned contact points but they did not help. Will the penfailure be solved after changing the cartridges? Installing printer again did not help.
Rajein

Yes, I did try it.
I completely uninstalled Firefox (including personal settings, bookmarks, add-ons etc.) and then I installed Firefox 24 from scratch. The outcome is unchanged. Namely, it installs it and then right when it is about to start for the very first time, it hangs. If I run the task manager I can see the process firefox32. It shows as if it is running. But in fact it is hanging doing nothing. It is almost as if the process is waiting for something to happen and that never occurs. Note that this should not have anything to do with, say, an incompatible add-on/plug in because I had them all removed. I also removed adobe flash prior to the installation and run the malware removal program too.

I cannot change the value in about:newtab from "newtab" to "blank." The dialog is displayed but when I click Ok, the value is not changed.

I cannot change the value in about:newtab from "newtab" to "blank." The dialog is displayed but when I click Ok, the value is not changed.
===Answer===
Comment on usual method and solution, by a forum Moderator.
As long as there are no confounding factors, such as certain extensions, or a user.jsfile the procedure is as follows
# Open a new tab and type "about:config" in the address bar.
# In the Search bar type: "newtab"
# Locate and double click "browser.newtab.url"
# In the "Enter String Value" box change "'''about:newtab'''" to "'''about:blank'''" and click OK.
# Verify that the value has changed and now all new tabs will be blank.
See post under by ''pirate048'' [/questions/976589?page=2#answer-509482] ~J99

Have to say that I rather agree with Mark..all we want is a simple, unadorned clean page that doe not track and show usage!! WHY NOT!! Is it too simple for developers..we aren't all (nor do we want to be!) software experts! Come on Mozilla..tidy up and clean up..it might be a quicker programme too!!

After upgrading to Maverick, when I double click on the attchment I get this message "...could not be saved, because you cannot change the contents of that fold

After upgrading to Maverick, when I double click on the attachment I get this message "...could not be saved, because you cannot change the contents of that folder. Change the folder properties and try again, or try saving in a different location." It happens for all types of files.
Any suggestions as how to fix this?
I'm on a Mac OS X 10.9.3 with Thunderbird 24.5.0

Thunderbird > preferences (I think on a mac) and under attachments set the folder

Cannot change the print margins when printing out my spreadsheet. Tried clicking on format and then Document but when I enter a number I always get " invalid number".

Similar Messages

Maybe you are looking for