Cannot change Tracking to Primary and Secondary when creating Item
We are on Inventory Management 11.5.10.2 but not on WMS. We notice that we cannot track an item with a Secondary UOM when creating it. The only way to track is by
Primary UOM. Is this because we are not on WMS or are we hitting a bug?
As I know seconday UOM feature is used for Process Manufacturing installed customers. If you do not have that you may not be able to use that.
Thanks
Nagamohan
Similar Messages
-
P965 Neo-f - primary and secondary ide channel stops working after changing gpu
I just changed my graphic card from 4850 to 4870x2 and then my idd devices stopped working, and when I look in device manager the primary and secondary ide channel has a yellow exclamationmark over them. And the error msg is as follow: This device cannot find enough free resources that it can use. (Code 12)
And when I look on the tab resources the two I\O range tabs have a red cross like over them probably meaning there is something wrong. And in the column Conflicting devies list: Input/Output Range 01F0 - 01F7 not available.
Input/Output Range 03F6 - 03F6 not available.
What I have tried so far:
Updating the bios, looking for I\o range crashes and irq crashes, uinstalling and reintalling severals times. And when I change back to my old 4850 card the problems disappears straight away.
Any ideas?Quote from: Crispin on 28-April-09, 20:15:49
Well reality says something different :D
And a reinstall fixed the problem. I find this post very amusing.
Ill bet your graphics doesnt even use its full potential on that board.
Me thinks it severly limited by the board and the cpu and imo a waste of a good graphicscard/money.
Its better to use only 2 slots of mem because of the strain you put on your memorycontroller when using 4 slots.
When running " double dualchannel" the memorycontroller can be overflooded when running too high mem.speeds, with errors and BSOD and crashes as a result. -
Is it possible to set primary and secondary display with 2 graphics cards?
I have an Early 2008 Mac Pro with two graphics cards and four monitors installed. Does anyone know how the computer (or more specifically Keynote) determines which is the primary display and which is the secondary?
Also is there any way to change the scheme?
What I am trying to do is switch the primary and secondary from the two monitors in my office to the monitor at the podium (would like it to become primary) and a vga projector (would like it to become secondary)
I bought the second graphics card so I wouldn't have to switch the cables back and forth three times a week. All the monitors work fine, it's just a matter of determining or changing primary/secondary
Thanks in advanceThanks Malcolm
I got that far – The keynote manual says that the display with the menu bar is the primary display – that works out fine. The problem is that the manual says that the display without the menu bar is the secondary (or alternate). But there are three displays without the menu bar.
What I would like to find out is: is there a way to choose the display without the menu bar to be the alternate?
When I try various combinations, there seems to be no rhyme or reason as to which display is the alternate.
Thanks again for your response! -
Set Primary and Secondary Interfaces
How can I set up primary and secondary network interfaces, so that it will automatically fallback to the second interface when I don't have the primary connected? I tether my phone to T-Mobile's network, but when I don't have it connected it want it to fall back to my wired connection.
Sorry, I only bump my own posts when I've added additional information to my last post and I see that no one has added anything to it in the past few days. I guess I would be better to create a new post instead of editing the old one.
I did give it a try and I have no real results to share. I created the two profiles in the /etc/netctl directory and named them as above (including Priority=1 for the tmobile connection and Priority=2 for the wired connection, as stated in the wiki entry even though man netfcfg.profile says it's only for wireless connections), then I enabled the service. There is the word "interface" after systemctl enable netctl-ifplugd@ which makes me think I should specify an interface but I have no idea which one to specify, so I just enabled it without it and it didn't complain. There's no way to start it. Both connections are enabled but it seems to default to the wired connection for some reason, when I want it to default to the tmobile connection and then fall back to the wired connection. Both are enabled and have IP addresses but nothing changes when I connect or disconnect my mobile data connection since it's using the wired connection.
edit: I just tried to enable the service using the interface name of my mobile data connection and it didn't change anything ex. sudo systemctl enable netctl-ifplugd@enp0s26f7u3
Last edited by brando56894 (2013-07-31 21:44:57) -
Magic Mouse Primary and Secondary Clicks Switched
Recently I picked up a Magic Mouse and have since found some very strange things that I don't know how to fix:
The primary and secondary clicks are switched. As in, under mouse settings when I select the secondary click to be on the right, only the primary click works on the right side and everything else is a secondary click. It is also very annoying because every time I have more than one finger touching the surface it counts as a secondary click. If anyone knows how to fix this I would really appreciate feedback.
I looked around in settings and couldn't find anything regarding this matter. I fiddled with some stuff but never got it working properly.
Feedback much appreciated!
--JustinLooking at another thread in this forum, I see some people who had older apple mice installed before the magic mouse are having this problem with the magic mouse.
I had an older wireless mouse that would take right-clicks before I set up the magic mouse. Unfortunately when I connect the older wireless mouse I can no longer access it's preferences. It only gives me the preferences a generic one button mouse. Somewhere there must be some set of files I can delete and it will forget this old mouse.
I am pretty disheartened after a week of this. One of the benefits to a mac is that I shouldn't have to dig around removing drivers and such -
ITunes U course published but I can't see my school in the Primary and Secondary Schools list
I don't know how to contact the responsable of the iTunes U administration to send an email and change the name of my school.
I want to change Villaviciosa De Odón - Colegio Pax-Casvi into "Eurocolegio Casvi". Anyway, even my organization has been approved for courses publishing, I can't find the name of my school at the list of iTunes U "Primary and Secondary" schools.
If I go to https://itunesu.itunes.apple.com/audit/633264363, the course is in the iTunes U.you might want to check on this possibility:
No music shows up in iTunes after upgrading -
Changed battery in laptop and now when trying to open dreamweaver cs3, I get "licensing for this product has stopped working"... contact customer support (thats a laugh). So what now?
it says: You cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this product or contacting your IT admin or Adobe customer support for help.
Well it seems I am only able to install this on a maximum of 3 computers so if I uninstall and reinstall I may have used up all three. What caused this in the first place?And most licenses extend to 2 machines; not 3. Your computer's clock probably reset when you changed batteries. Is your computer's clock set to the correct date and time now?
See Activation & Deactivation Help
Nancy O. -
How to bind the Zero line between a primary and secondary Y axis?
All -
We are using combination charts with:
- primary and secondary Y axis (Sales versus Volume).
- Scale: Auto (Y) Axis
- Linear
- Fixed Label Size
In instances where one axis has a negative value and the value ranges are diverse the Zero line will be different for both. This causes some confusion when trying to read. Other that putting in manual (Y) axis with min and max, is there a way to force the chart to keep the same Zero line?
Thanks!KOENIG Yvan wrote:
It's quite a basic requirement for a spreadsheet program
It's your point of view. It seems that it's not the designers's one
Obviously, true
The number of different features described once as "a basic requirement" is really amazing but a feature asked once is perhaps not one which must be added to a program like Numbers.
Other tools are available for professional numbers crunchers .
I know there are other threads asking about secondary axes, but your point is taken. I'm definitely not a number cruncher, but I am/was a pretty advanced Excel user.
_Go to "Provide Numbers Feedback" in the "Numbers" menu_, describe what you wish.
Then, cross your fingers, and wait _at least_ for iWork'09
Thanks for that, I didn't quite know where to go for the feedback - provided and fingers crossed.
Cheers! -
Can't find my DNS Primary and Secondary
Dear God, I need my DNS primary and secondary. I'm trying to set my xbox 360 up with it's own ip ect. I've gone to my airport to get this information but my DNS is the same as the IPv4 router. My xbox requires a DNS primary and secondary. The only thing I can find for my DNS is a Domain Name and Server address: 10.0.1.1 Do I put this number in my xbox for the DNS with no secondary?
I think your router is not configured properly for your internet connection. Router is not giving out a valid DNS to the computers because it cannot obtain it (dns) from the modem. Is your connection Cable or DSL?
-
Primary and secondary Email accounts
Hello,
Is there a way to specify primary and secondary email account ? In case if the primary server is down, the secondary server would be used for sending the notification.
Thanks.I am implementing something similar to what you have suggested. I was wondering if there is a way to achieve this by just changing configuration. Looks like it is not possible to configure it and coding it is the only way out.
Thanks for your inputs :) -
I changed my ipod password and now when i try to unlock my ipod it says wrong password. Is there anyway i can get into my ipod without restoring it?!?!?!?!?!?!
If You Are Locked Out Or Have Forgotten Your Passcode
iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
iOS- Understanding passcodes
A Complete Guide to Recover Your iDevice if You Forget Your Passcode
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
1. Verify that you are using the latest version of iTunes before attempting to update.
2. Connect your device to your computer.
3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
4. Select the Summary tab.
5. Select the Restore option.
6. When prompted to back up your settings before restoring, select the Back Up
option (see in the image below). If you have just backed up the device, it is not
necessary to create another.
7. Select the Restore option when iTunes prompts you (as long as you've backed up,
you should not have to worry about restoring your iOS device).
8. When the restore process has completed, the device restarts and displays the Apple
logo while starting up:
After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
iOS, keep your device connected until the "Connect to iTunes" screen goes away or
you see "iPhone is activated."
9. The final step is to restore your device from a previous backup.
If you can not restore your device then you will need to go to recovery mode.
Placing your device into recovery mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake
and Home buttons at the same time. When the device turns off, release the Sleep/Wake
and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the device.
The device should turn on. Note: If you see the screen pictured below, let the device
charge for at least ten minutes to ensure that the battery has some charge, and then
start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
When this screen appears you can release the Home button.
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information. -
Windows 8.1 screen bounces between primary and secondary monitors
I have a Lenovo T530 laptop with a docking station and a IBM monitor L200P attached to it.
Up until yesterday, this configuration was running Windows 8 Pro with no issues.
However today, after I installed the Windows 8.1 upgrade, I started having problems with the screen bouncing between the primary and secondary monitors without my intervention. The problem happens very regularly, regardless of whether I have selected the laptop as primary monitor or the IBM monitor attached to the docking station.
I verified that the problem does not happen with Windows 7 and Windows 8 installation and only starts appearing after the Windows 8.1 upgrade is applied.
Does anybody have similar problems
Thank you in advance.O''philipp [[#answer-697652|said]]''
<blockquote>
another thing you could try is this: enter '''about:config''' into the firefox address bar (confirm the info message in case it shows up) & search for the preference named '''layout.css.devPixelsPerPx'''.
double-click it and change its value to '''1.2''' (or any other zoom factor that fits your purpose: 1.0 relates to 100%, 1.2 equals 120% and so on; -1.0 is the default value and will adhere to the system settings).
</blockquote>
Okay, I tried it, set it to 1.2 and even more stuff got blurry and fuzzy. Besides everything in the FF menu bar everything in the header on youtube and a few other pages did it too. It did make the pages fill the actual page better, but the blur is worse than this prob so I set it back to -1.0.
Any other ideas? -
Need help with sorting records in primary and secondary databases
Hi,
I would like to store data into primary and secondary db in different order. For the main primary, I want it to be ordered by login_ts instead of uuid which is the key.
For the user secondary database, I want it to be ordered by sip_user. For the timestampe secondary db, I want it to be ordered by login_ts.
This is what I have right now,
this is for main
uuid=029ae227-a188-4ba8-aea4-7cbc26783d6 sip_user=200003 login_ts=1264327630 logout_ts=
uuid=22966f76-8c8a-4ab4-b832-b36e8f8e14d sip_user=200003 login_ts=1264327688 logout_ts=
uuid=e1846e4a-e1f5-406d-b903-55905a2533a sip_user=200003 login_ts=1264327618 logout_ts=
uuid=e2f9a3cb-02d1-47ff-8af8-a3a371e20b5 sip_user=200003 login_ts=1264327613 logout_ts=
this is for user search
uuid=029ae227-a188-4ba8-aea4-7cbc26783d6 sip_user=200003 login_ts=1264327630 logout_ts=
uuid=22966f76-8c8a-4ab4-b832-b36e8f8e14d sip_user=200003 login_ts=1264327688 logout_ts=
uuid=e1846e4a-e1f5-406d-b903-55905a2533a sip_user=200003 login_ts=1264327618 logout_ts=
uuid=e2f9a3cb-02d1-47ff-8af8-a3a371e20b5 sip_user=200003 login_ts=1264327613 logout_ts=
this is for timestamp
uuid=029ae227-a188-4ba8-aea4-7cbc26783d6 sip_user=200003 login_ts=1264327630 logout_ts=
uuid=22966f76-8c8a-4ab4-b832-b36e8f8e14d sip_user=200003 login_ts=1264327688 logout_ts=
uuid=e1846e4a-e1f5-406d-b903-55905a2533a sip_user=200003 login_ts=1264327618 logout_ts=
uuid=e2f9a3cb-02d1-47ff-8af8-a3a371e20b5 sip_user=200003 login_ts=1264327613 logout_ts=
but what I want is :
this is for main
uuid=e2f9a3cb-02d1-47ff-8af8-a3a371e20b5 sip_user=200003 login_ts=1264327613 logout_ts=
uuid=e1846e4a-e1f5-406d-b903-55905a2533a sip_user=200004 login_ts=1264327618 logout_ts=
uuid=029ae227-a188-4ba8-aea4-7cbc26783d6 sip_user=200003 login_ts=1264327630 logout_ts=
uuid=22966f76-8c8a-4ab4-b832-b36e8f8e14d sip_user=200005 login_ts=1264327688 logout_ts=
this is for user search
uuid=e2f9a3cb-02d1-47ff-8af8-a3a371e20b5 sip_user=200003 login_ts=1264327613 logout_ts=
uuid=029ae227-a188-4ba8-aea4-7cbc26783d6 sip_user=200003 login_ts=1264327630 logout_ts=
uuid=e1846e4a-e1f5-406d-b903-55905a2533a sip_user=200004 login_ts=1264327618 logout_ts=
uuid=22966f76-8c8a-4ab4-b832-b36e8f8e14d sip_user=200004 login_ts=1264327688 logout_ts=
this is for timestamp
uuid=e2f9a3cb-02d1-47ff-8af8-a3a371e20b5 sip_user=200003 login_ts=1264327613 logout_ts=
uuid=e1846e4a-e1f5-406d-b903-55905a2533a sip_user=200003 login_ts=1264327618 logout_ts=
uuid=029ae227-a188-4ba8-aea4-7cbc26783d6 sip_user=200004 login_ts=1264327630 logout_ts=
uuid=22966f76-8c8a-4ab4-b832-b36e8f8e14d sip_user=200004 login_ts=1264327688 logout_ts=
Right now, I have:
int compare_login_ts(dbp, a, b)
DB *dbp;
const DBT a, b;
int time_a = 0;
int time_b = 0;
time_a = atoi ( (char *)a->data);
time_b = atoi ( (char *)b->data);
return time_a - time_b ;
for the timestamp secondary, I set that compare function:
if ((ret = (*sdb)->set_bt_compare(*sdb , compare_login_ts )) != 0){
Does anyone know how can I make it sorted according?Hi,
The DB->set_bt_compare() is used to compare keys in Btree database. In the callback function, both the DBTs are key, but not data. Please refer to http://www.oracle.com/technology/documentation/berkeley-db/db/api_reference/C/dbset_bt_compare.html.
If you want any field in the data to be sorted, you might create a secondary index on it and define the compare function as you wish.
Regards,
Emily Fu, Oracle Berkeley DB -
I changed my laptops OS and now when I try to sync my music from phone to the new itunes it is saying Remove and replace. What do I do to keep the music and playlists from myphone?
Did you try to set it up again as new device?
How to back up your data and set up as a new device -
Setting up a primary and secondary Database in Oracle 10G
Hi Experts
can you please tel me the steps involved in creation of primary and secondary database? This is the first time i am going to configure this setup. Please provide your helping hands.
Thanks alot in advance,
RamAbsolutely glad to help.
Step 1: Clarify what it is you are trying to build. Are you talking about a Standby Database? Perhaps Physical or Logical Data Guard? If so what protection mode? Stand-alone or RAC? Or are you just trying to dup an existing database on another server in which case you can just use RMAN.
Step 2: Go to http://tahiti.oracle.com and read the relevant docs
Step 3: Go to http://metalink.oracle.com and look at the Knowledge Base docs
If you have any question thereafter contact us and be sure to include your version number, not a marketing label. 10g is a marketing label that refers to everything from the 10.1 Beta through 10.2.0.4.
Maybe you are looking for
-
Why can't I print a word document from my macbook pro
Since the last software upgrade, I am unable to print from word. I can print from excel and ppt, but not word. I have re-installed the printer drivers after uninstalling them but it still doesn't work.
-
I would like to be able to use Firefox on the new account/profile I have created and don't know why my system will support it on this account/profile but not the new one.
-
Inbound IDOC Mass processing - No status message
Hi Friends, I am updating a database table using inbound IDOC. But in batch job when XI passes multiple IDOCS, for some IDOCs there is no status message even though i coded for status message. If i rerun IDOC in BD87 then it work fine. please help. r
-
Change Local currency of a Co.code. say from USD to GBP
Hi friends. Is it possible to create a co.code with Local currency as USD and change it later on to GBP after the transactions have been posted. Thank you all for the needful. With Best Regards, M. Naveen Kumar.
-
CTRL-F Find text in page does not exist/work
I ran the latest Firefox mobile on my Nokia N900 with PR1.2 firmware. When viewing a web page, I wanted to find some text in the page, so I hit CTRL-F but this feature does not seem to exist.