Cannot change Transaction Type (COBL-RMVCT) for posted documents. (FB02)

Hi guys,
I'm encountering some problems with Document Change Rules. I already configured in SPRO the line item change rules for Transaction Type (COBL-RMVCT).  I already set it to "Field can be changed" but the system still does not allow changes. I also set it for all account types and company code, but still no luck. I hope somebody can assist me since we require that the transaction type be editable for posted documents. Thanks!

Hi
I am not sure about the reason for why the "changing" is not working.
However, thought I should give my experience and opinion on this.
I have not seen a system that allows "Transaction type" to be changed. If allowed, in my opinon it is similar to allowing the cost assignment field such as cost centre, profit centre or an order being allowed to changed. Thus should not be changed once posted. Further is these are allowed to be changed the imact to the prevous reported data will have to be estimated. E.g. if the transaction types are used for consolidation what is the impact of changing previous month data.

Similar Messages

  • Transaction type ZGC not possible (posting to affiliated company) in ABSO

    Hi all,
    We have depreciation areas 01, 30, 31, 32 .
    dep area 30, 31, 32  inherits the values from 01.
    We want to post credit value to dep area 01 after doing the aqusition .
    Hence we created a seperate transaction type ZGC ( in aqusitions- Tcode AO73) and limited it to dep areas 01, 30, 31, 32.
    Transaction type ZGC is having credit and " do not post to affliated company " radio button is selected.
    Now the issue is when we run ABSO to do a credit post in dep area 01 we are getting the below error .
    Transaction type ZGC not possible (posting to affiliated company)
    Message no. AA390
    Diagnosis
    For the current document, you specified either implicitly (via the customer/vendor), or explicitly (with a manual entry), that this posting is to an affiliated company. In this case, Asset Accounting requires you to use special transaction types.  This enables the system to separately identify such transactions.
    Procedure
    Check the line items that you have already entered, and the transaction type you entered.
    Not sure why it is asking for affliated company .
    It will be great if any one help on this why we are getting this issue.

    Hi Daya,
    Please try to choose Trans.Type 100 in AO73 transaction code and select the radio button  Post to affiliated company under Posting type.
    Thanks,
    Kumar

  • Transaction type 100 not posible (posting to affiliated company)

    Hil
    While asset acquistion posting in f-90 ia geting error message "Transaction type 100 not posible (posting to affiliated company)"
    can you please give solution for this one

    Hi
    pl check following settings in spro Img->Financial Accounting-Asset Accouning----Transctions--Acquisitions-Define Transaction Types for Acquisitions-in choose activity window -dbl clk on "Define Transaction Types for Acquisitions"
    select transaction type 100--click on details--check posting type.  if  " Do not post to affiliated company." is selected then choose another transaction type which allows acquisition with option "Post to affiliated company"
    regards
    Vishwas
    Edited by: Vishwas_bapat on Mar 24, 2011 1:24 PM

  • "No transaction type is available for creating a transaction" service order

    Hi all,
    I am new in IC .
    I try to create service order or service ticket for incoming calls
    We are using CRM 7.0
    After I confirm the account I try to create service order
    But no screen displayed and error "No transaction type is available for creating a transaction" occurs
    in customizing there is a transaction type SRVO, also I copied it to ZRVO
    But here how can I define that this transaction type is assigned to this application??
    Please reply in detail steps.
    Thank you.

    Hi Rupesh,
    Thanks for your reply..
    I made a lot of controls but I can't find where I am wrong..
    My senario is, taking phones, create interaction record and create order for further investigation.
    I copied IC_AGENT role.
    I copied transaction type 0010 to Z010
    I create business transaction named ZBTP for transaction type Z010
    I made Define Transaction Types for Navigation for Z010
    Then Define Business Role -> Assign Function Profiles
    Here I assign my business transaction ZBTP to IC_BT function profile
    But when I connect tot the system with user having this business role
    I can create interaction record with type Z010, it is ok.
    When I press Service Order it gives this error.
    Work center id for Service order is : IC_UIU_SVO
    I copied my business role from IC_AGENT, and here this work center id was not active
    In my business role I made it active.  Is this work center can't used in IC senario
    Also how can I understand which transaction type is needed for it??
    If I know which transaction type is needed to create service order or service ticket under IC, then I will control it of course..
    I also copied transaction type TSVO(service IC) to ZSVO and do the above things for this type too..
    But nothing changed..
    Please help !!

  • Please helpme "Cannot change transaction isolation level in the middle of "

    sorry my english helpme!!
    i am trying to insert a registry n a table in postgresql throght JAVA STUDIO CREATOR and i got the next error
    Cannot change transaction isolation level in the middle of a transaction
    helpme thanks you

    Duplicate post. Answered in the other thread.
    http://forum.java.sun.com/thread.jspa?threadID=5115855

  • No transaction type is available for creating a transaction (IC WebUI )

    Hello,
    I'm tying to link WebUI business transactions (create transactions of
    business activity, service order, service confirmation)to the IC WebUI.
    I linked logical ID to the workcenter and assigned generic OP to the
    nav.bar profile and activated workcenter screen in the business role.
    I think that WebUI business transaction screen itself is well attached.
    But When I click the workcenter(logical ID is directely linked the
    workcenter). There are message:"No transaction type is available for
    creating a transaction". So, I cannot select any transaction type and
    go to the biz.tran.create sceen. there are lot's of transaction type of
    business activity.(Appointment). I got the same problem to the WebUI
    service order create transaction.
    But, Linking WebUI service confirmation creation screen to the IC WebUI  is sucessful: I can
    select transaction type of service confirmation.
    I don't know any difference between them.
    If you guys have any idea, please let me know.
    Thanks
    Mickey.

    Dear Kunstelj ,
    I found the solution with your suggestion.
    But What I did is a little bit different.
    I assigned two channel IAC interaction center, IAW Interaction center WebClient to the transaction type not GUI CRM Webclient UI. So It does work!!.
    Thank you for your help. I really appreciate it.
    Best regards,
    Mikyoug Kim.

  • In iPhoto '11 I cannot change the book settings. For example, adding page numbers. There is no "option" button as is suggested by the help item.

    In iPhoto '11 I cannot change the book settings. For example, adding page numbers. There is no "option" button as is suggested by the help item. How can I change to book settings?

    The "options" button should appear at the bottom of the iPhoto window, when you view your book, then the Book Settings Button should be available and you can activate page numbers.
    But remember, that the settings available will depend on the Book Theme you selected. The above shows the settings for one of the "Travel" themes. In a Picture Book Theme, e.g. you cannot add page numbers.
    What theme and book size are you using?
    Regards
    Léonie

  • Cannot change transaction isolation level in the middle of a transaction

    por favor pido ayuda a quien sepa de la solucion de este problema, es q estoy trabajando con postgre, e intento realizar actualizaciones a la base de datos y me sale este error
    Cannot change transaction isolation level in the middle of a transaction
    gracias

    sorry my english helpme!!
    i am trying to insert a registry n a table in postgresql throght JAVA STUDIO CREATOR and i got the next error
    Cannot change transaction isolation level in the middle of a transaction
    helpme thanks you

  • Cannot change transaction isolation during distributed transaction

    Hi All,
    When ever the IPortalComponent session expires my application is throwing Null pointer exception. So I am catching the NullPointer exception and then reloading the page again. It is working in frontend without any issues.
    But in the error log monitor(nwa) I can see the below error when reloading the page after component session expires.
    Cannot change transaction isolation during distributed transaction and when the connection is shared. DataSource name: "PRODB2
    As per my knowledge I understood that this is happening beacuse application is trying to recreate a new connection pool while one pool instance is alive.
    If this is correct can any one tell me how to destory the pool of current session when reloading the page.
    Thanks in Advance,
    Chinna.

    What was the solution to the problem ?

  • In transaction Fv60 can we change transaction type(invoice/ credit memo)

    Hi Experts,
    Can you help?
    In transaction Fv60 , while editing a park documentcan can we change transaction type(invoice/ credit memo) . I mean can we change the status of document from credit memo to invoice?
    Thanks

    Hi Sumit,
                  Certainly, we can change the transaction type in fv60. Yes we can change the status of the document.
    Regards,
    Srinivas Muthyala

  • Cannot change media type

    I imported an audiobook from CD to my library and wanted to change afterwards the media type from "music" to "audiobook" to shift to the audiobook section. Did not work. In "information"-> "options", the media type "music" shows in grey, cannot be changed. I am using the newest itunes version on a MAC.

    That's correct, you cannot change media type whilst match is turned on.
    Suggest that you delete audiobook from the cloud and library but do not move file to trash.
    Turn off match, readd track and change media type from music to audiobook.
    You can now turn match back on.
    Jim

  • No transaction type is available for creating a transaction

    Hi All,
    I have referred the following link
    http://wiki.sdn.sap.com/wiki/display/CRM/ActivityTransactionDisplayinNew+UI
    However, I am not able to create activity transaction.
    It gives message as No transaction type is available for creating a transaction.
    I have checked the component BT111M_OPPT and window inbound plug IP_CREATE.
    The settings in SPRO are maintained
    but still I get the value of   CASE lr_context_node->collection_wrapper->size( ) as zero.
      lr_context_node = lr_proctype_popup->get_context_node( iv_cnode_name = 'PROCTYPE' ).
      CHECK lr_context_node IS BOUND.
      CASE lr_context_node->collection_wrapper->size( ).
        WHEN 0.
          MESSAGE s005(crm_btil) INTO lv_title.
          CALL METHOD lr_msg_srv->add_message
            EXPORTING
              iv_msg_type       = if_genil_message_container=>mt_info
              iv_msg_id         = sy-msgid
              iv_msg_number     = sy-msgno
              iv_msg_v1         = sy-msgv1
              iv_msg_v2         = sy-msgv2
              iv_msg_v3         = sy-msgv3
              iv_msg_v4         = sy-msgv4
              iv_msg_level      = '1'
              iv_important_info = abap_true.
    Is there any FM which will fetch the custom transaction types?
    Thanks and Regards,
    Gauri.

    Hi Gauri.
    Try to replicate or create the same using the same transaction type from SAP GUI if it is working fine there , issue will be in the web ui other wise the issue will be with IMG configuration.
    To get the custom transaction types use the function module
    CRM_ORDER_PROC_TYPE_SELECT_CB
    if you want to know all process types then use the below function module
    CRM_ORDER_PROC_TYPE_T_SEL_CB ( for this FM dont pass any import peramters except language as EN)
    Thanks & regards
    Raj
    Edited by: bmsraj on Aug 25, 2011 9:27 AM

  • Natures of classes of accounts for posted document are not balanced

    Hi
    Can anyone help me with this error:
    "Natures of classes of accounts for posted document are not balanced"
    I am getting this error while doing GR(posting goods) using 561 movement type for a material.
    While I am able to post Goods with another material having same valuation class and Profit Center.
    Thanks
    Neha

    better post this question in procurement or (pure) finance forum!

  • Update of business place and section code for posted documents

    Hi,
    We have few posted documents without business code and section place.
    Now we want to update the business code and section place for posted documents.
    guide me
    sateesh

    Hi,
    The issue got resolved. We need to give in MM invoice number not the accounting document invoice number.
    Fi invoice number and MM invoice number are availiable in bkpf and MM invoice number will availible in BKPF-AWKEY field.
    Sateesh

  • When Printing Form16, Error "Device types are unsuitable for ADS Documents"

    When Priniting Form16 it displays a message in the taskbar "Device types are unsuitable for ADS Documents"
    Regards,
    Ranga

    You need a special device/printer for ADS. Try doing some research on that error.

Maybe you are looking for

  • How to skip non-PDF files in Action on folder?

    Hello, I have an Action in Acrobat Pro XI that takes a default folder and (using JS) batch converts the PDFs to text.  However, it also tries to convert *.txt files.  I don't care that it imports the *.txt to *.pdf as temp file but it then stops the

  • Pay for Delete "PFD" While Making Payments?

    I have a private student loan that went into default when it wasn't supposed to (that's a whole different story). But long story short, I am communicating with the loan holder (SunTrust) regarding a PFD for the defaulted loan. My goal is to pay the l

  • [nQSError: 46044 error in obiee

    Hi Team When i am opening a developed report in in Compound layout i am getting [nQSError: 46044 error in obiee] ,whereas when the same report is placed in the dashboard it is giving the desired output. So basically i am trying to say that , the repo

  • Work repository not bound to Master Repository

    Hi All, I have created a schema with username ODIW and password ODIW and created a work repository named WORKREP1 in the ODI topology. Now when i am logging in to the client through the newly created WORK repository no error is shown and i am able to

  • Solution for Sale of Property in REFX

    Hi Team How would you map the process of  construction and sale of real estate - Apartments ( for eg,).In the process provide for visuals on Apartments blocked and available..... Thanks Kartik