Cannot charge the mac book pro after updated with Lion mountain patch.

Yesterday , i updated to Lion mountain patch, I am not sure what the version is. But after that i dont see the laptop is getting charged.My battery completely drained off. I dont know how to resolve this issue.But i am not sure because of the "update" only it happened.Is there any way to charge up the lap ?
any help is much appreciated. Thanks..

I just plugged in the charger after 10 hours. Now , eveything looks good.
Mysteryyy!!! Woohoo!

Similar Messages

  • Hey guys on my mac book pro after updating three apps wont leave my dock, when i close them they just re-appear they are "LoginServer", "USBServer" and "NetServer" any ideas to what is the issue?????? PLEASE HELP.

    Hey guys on my mac book pro after updating three apps wont leave my dock, when i close them they just re-appear they are "LoginServer", "USBServer" and "NetServer" any ideas to what is the issue?????? PLEASE HELP.

    Hi I have just got back from the apple store and the guy at the Genius bar looked at it and said it was a manufacturing fault, and because it has been like it since new, and seemed to be getting worse he replaced the computer  and I have a new warranty from today.
    We got the feeling as soon as he looked at it that he has seen this before, I did say to him I was concerned it would be a replacement screen and I was not really happy about that as it was so new, and he said that was the normal procedure, but as the fault was already there at new and it was getting worse they would replace. I could not have asked for a better service.
    Not unpacked this one yet but am hoping all is good, its a great little machine.
    Thank you for your responses, and I hope this might help someone else.  One thing it did not seem to be missing pixels but something to do with the screen production?

  • Can you operate the mac book pro 15 inch with out the battery?  I read somewhere in a post that it lowers the power to about 1 gig.  I asked apple and they said it is not true because you can use it with or without both together without affecting op pw

    can you operate the mac book pro 15 inch with out the battery?  I read somewhere in a post that it lowers the power to about 1 gig with out the battery.  I asked apple and they said it is not true because you can use the comp with the power adapter and battery together or either by itself and it will not effect the 2.16 gig.  Thank you.

    If you remove the battery the CPU power will be cut by 50% (whatever they told you) so that there's no lack of power or overheating issues. It's best to always keep the battery in.

  • Im not able to use facetime at all. Do some countries have restrictions. Can anyone help me out ? I use a Mac Book pro retina display with OSx Mountain lion

    Im not able to use facetime at all. Do some countries have restrictions. Can anyone help me out ? I use a Mac Book pro retina display with OSx Mountain lion.

    FaceTime for Mac: Troubleshooting FaceTime

  • Internal camera no longer working on multiple Mac Book Pros after updating to 10.8.5. with third party software. (Smart Board, Bridgit ) Camera does work with Skype.

    I have several Mac Book Pros that I am responsible for.  They will no longer recognize the camera in SmartBoard and in Smart Bridgit since updating to 10.8.5. One of the machines is even running 10.9 and it still won't work.  I have teachers who are very frustrated because they wish to use the Bridgit Software in their classrooms. Skype appears to be working fine.  It is just the Smart Board Software.

    Hey there MelAllen,
    It sounds like you need help troubleshooting the built in camera on some of the computers there. I want to recommend the troubleshooting steps outlined in this article named:
    How to Troubleshoot iSight
    http://support.apple.com/kb/ht2090
    Built-in iSight cameras
    These steps are for iSight cameras that are built into a computer, such as the iMac G5 (iSight) or later, the MacBook, or MacBook Pro.
    See if the issue is application-specific.
    Try another application (iSight works with applications like iChat, PhotoBooth, and iMovie HD 6) to see if the iSight camera exhibits the same behavior in all applications. If it only happens in one application, try reinstalling that application.
    See if the issue is user-specific.
    Test your iSight camera in another user account. If the issue only occurs in one user, the issue would be isolated to user settings.
    Find out if the computer recognizes the iSight
    Check System Profiler (in the Utilities folder, inside the Applications folder). Under the USB header, check to see if the iSight camera is detected.
    Reset SMC or PMU
    Reset your computer's SMC or PMU, and then check System Profiler again. (SMC reset instructions for iMac G5 (iSight), Intel-based iMacs; PMU reset instructions for MacBook and MacBook Pro.)
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • HT3964 BRAND NEW MAGSAFE POWER ADAPTER WON'T CHARGE THE MAC BOOK PRO

    I'VE RESET MY MAC BOOK PRO BECAUSE THE POWER ADAPTER STOPPED LIGHTING UP & WORKING AND ITY'S STILL NOT CHARGING THIS IS A BRAND NEW MACBOOKPRO I JUST PURCHASED IN BEST BUY & I DON'T KNOW WHAT TO DO IT'S NOT CHARGING THE BOOK! DOES ANYONE KNOW WHAT I SHOULD DO?

    Do a SMC Reset,
    https://support.apple.com/kb/HT3964
    https://discussions.apple.com/docs/DOC-3046
    A new machine shouldn't need one, but it's it's not charging that's the solution.
    All I can figure it sat on a shelf at Best Buy too long, they are closing 50 stores so I hear, so apparantly they haven't been busy like a Apple Store is and product flies off the shelves in pristine charged up like condiiton.

  • Impossible to download Mavericks on a mac book pro 15'' 2008 with lion

    I cannot download Mavericks on my mac book pro. I cleaned it with Onyx, repared the permissions, gave my id in App store, which was recognized, deactivated my Intego Antivirus, no way.
    It works on a mac mini with snow leopard, but it does'nt put the file under the downloads so that I can copy it.
    My Mac is given as compatible with Mavericks.
    I found much messages on Internet about analogous problems, but no fix.
    Is Apple aware of this? Is anybody knowing a remedy?
    Regards
    Bruno

    Yes, I have 10.7.5.
    I don't get any error message. It just does not download. But it does on a mac mini on the same network, and with an older version (snow leopard). Very strange.
    It would be helpful if I could download a full version of Maverics on any computer (inclusive Windows PC
    Regards
    Bruno

  • Mac book pro running slow with lion

    My Mac book pro is running real slow since upgrading from leopard to lion. Takes up to a minute or more to boot up and open some programs like I Photo.

    Perhaps you need more RAM or you do not have enough Free Space on your Hard Drive...
    See this User Tip by ds store  >  Why is my computer slow?

  • I cannot open my mail on my mac book pro after downloading OS X Mountain Lion Help

    I cannot open my mail after downloading OS X Mountain Lion update please help

    I cannot open my mail after downloading OS X Mountain Lion update please help

  • Video Latency Issue On The Mac Book Pro 2.4 With Leopard 10.5.5

    Gear: Macbook Pro (early 2008 model) - 2.4gigs cpu 2gigs ram - all the latest updates... no other applications running during the test
    Hi folks. Currently I am having a latency issue when trying to record directly into iMovie using the built-in microphone and iSight camera. Basically, the video seems 5 - 7 frames late to the audio. I found that a good way to demonstrate this issue was simply doing a few handclaps as a test.
    This is a quick handclap test displaying some video latency during recording with the iSight camera in iMovie 08.
    - Just download this link — and import it into iMovie 08 - Here is a link to a zip file that you can import into iMovie 08 - It's 2.5meg - .m4v export - Also it was recorded as standard format and audio midi setup app: audio was set to 44.1:
    http://www.brainbeast.com/37/clap-1-large.zip
    - Play from beginning. As soon as you hear a clap sound — pause with the space bar - then back up before the clap with the left arrows
    - Then click the right arrow several times until you hear the beginning of the clap sound ( This is the audio: start frame)
    - Now — you will notice the video still has an open hand. At this point click the right arrow, counting as you go several times until you see the hand close. This is the amount of frames that the video is late to the audio. For me it seems to be an average of about 5-7 frames late.
    Unfortunately iMovie 06 nor QuickTime will not scrub audio as you go frame by frame with the arrow keys so you cannot test it there. If you have some other application such as final cut Pro, you could test it with that.
    ! IF YOU WOULD LIKE TO PERFORM THE TEST YOURSELF:
    - Just record a new movie in iMovie 08 - using the built-in mic and i-Sight camera — and see if it is also slightly out of sync
    Note: to be as fair as possible — I did a slow handclap ( in order to not challenge the frame rates) - also, in order to get the maximum volume I used an open palm ( clap on the palms with your fingers spread out as you can see I did.)
    Please let me know if this latency appears to be the same for you as it does for me.
    Q: Is it just my machine or does it happen to you too?
    Q: Does anyone know a way around this latency issue?
    Q: Does anyone know if Apple is aware of this latency issue?

    I am experiencing the same incredibly frustrating problem as well. When I record directly into iMovie
    '08, the video lags the audio by a fraction of a second.
    I have tried shutting down all other applications and having only iMovie up. Same problem.
    I tried recording the video into QuickTime instead of iMovie and experienced the same problem. (Which makes me think it is perhaps a hardware or operating system issue.)
    I tried the technique suggested here and on other sites of "double-dragging" the clip from the Events pane into a project (one normal drag and one Shift+Cmd drag) so that I had the audio and video as two separate tracks. After muting the audio on the video track, I then attempted to slide the audio over to sync it with the video, but even down at the 1/2 second zoom setting I didn't seem to have enough granularity to move the audio so that it was exactly in sync with the video. I was wishing I could use the arrow keys or something like that to move the audio just one frame at a time.
    All I want to do is record a video directly into iMovie '08 - this would seem to be something trivial to do!

  • HT4356 Mavric doesn't support my 5 years old Big Screen Display, OR? Tried to connect my Mac Book Pro after installing Mavric, The Screen didn't work as before. I could only see the Desktop but not the movies for example. What can I do?

    Mavric doesn't support my 5 years old Big Screen Display, OR? Tried to connect my Mac Book Pro after installing Mavric, The Screen didn't work as before. I could only see the Desktop but not the movies for example.
    <E-mail Edited by Host>

    It appears what happened is the installer though it was looking at a empty drive and just went ahead and installed.
    I of course am assuming here you didn't use Disk Utility to format the drive first before installing, that would wipe out your files and programs for sure.
    So what to do, what to do.
    Well there is hope for you as long as the drive wasn't Filevaulted.
    I'll explain. When a hard drive writes data for the first time to a drive, it starts at the very top and works it's way down.
    When OS X was installed the first time, it was at the top of the drive, unless you upgraded then the upgraded OS X could have been written elsewhere.
    Now when you just reinstalled OS X, the new OS went on the top of the drive, overwriting any data that was there previously, so what was there you have lost forever which is about 8GB or so. If it was the previous OS there, then your more in luck because only the old OS X was overwritten.
    The remaining space on the drive still can have a copy of your files, provided it's not overwritten yet.
    It's because when a hard drive deletes data or reformats, it doesn't remove the data off the drive or overwrites it immediately, it's just made so it's SPACE is available for new files to be written there.
    So technically one can recover the deleted data off a non-encrypted/scrubbed hard drive with special software.
    The way it does this is it reads the 1's and 0's of the files themselves, and through a lot of figuring out, can tell what that file is and what it belongs too.
    So what you will have to do is this:
    Create a data recovery/undelete external boot drive
    or if you don't have the skills, then take it to a local PC/Mac tech and they can do a direct image of the drive and then you can run Data Rescue on it to rebuild your files.

  • Hello, I have a problem with my mac book pro after running the battery dead on a game.  The display has shrunk leaving two black margins on either side. What to do ?

    Hello, I have a problem with my mac book pro after running the battery dead on a game.  The display has shrunk leaving two black margins on either side. What to do ?

    Go to System Preferences>Displays and set the resolution to "Best for this computer" (or something to that effect).
    Clinton

  • The mac book pro cannot detect the internal speaker. What's the possible causes? and how to fix it?

    I've connect the mac book pro to my LED TV with the headphone port as my audio output. After I disconnect it, the internal speaker did not work and the mac could not detect it from the system preference. What is the problem? Is it because of the hardware or software problem? Please help.

    Please detail all you have done to resolve your issue.  Need this information so that the users can avoid the "been there, done that" scenario type responses.  This is to avoid repeating the troubleshooting you may have already tried.  Thank you.

  • How long should the Mac Book pro hold its charge???

    How long should the Mac Book pro hold a  battery charge??

    For a single use or how long will the battery last until it needs to be replaced?  For single use, it depends on what you are doing when using you mac.  I find that when using mine I get about 6-6 1/2 hours just using it to browse the internet before I need to recharge it.  If it is one of the newer Macbook Pros that claim to have a 7 hour battery life, It can last up to 5 years.  See this article on notebook batteries to get the most out of your battery: http://www.apple.com/batteries/notebooks.html.  Hope this helps

  • The Mac Book Pro is not charging. The led is green with the connection and the computer is not charging. Thank you for the help

    The Mac Book pro is not charging. The led is green with the connection and the computer is not charging. Thank you for the help

        Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    If this does not help, contact Apple.
    Best.

Maybe you are looking for

  • Blackberry messenger app wont open

    Well a couple of days ago, my blackberry froze so i decided to pull the battery out for a couple of seconds and put it back in again to resolve this. However, when i tried opening up the blackberry messenger app, it wouldn't open. The bbm app icon is

  • How can I copy albums from my zen extra back to my computer in the right ord

    When I copy albums from my zen extra 60 G back to my computer the songs always are in alphabetical order. How can I copy them in the right order as they are on the CD?Thanks from GermanyRainer

  • Error in Extended syntax check- Select Query

    Hi all, Iam getting this following error in Extended syntax check " Large table PA0002: No field of a table index in WHERE condition" Code :SELECT SINGLE PERNR INTO (G_PERNR) FROM PA0002 WHERE ZZLEGACY_PAYROLL = I_FILETAB-PRNO                        

  • Call Customer Functions.

    Hi All, What does the suffix "001" indicates in the command "Call     Customer Function 001" ?  What are different types of Call Customer Functions? In the Version ECC 6.0 There are some more functions which have been added such as 003, 004, 005. Can

  • Steps of EDI is used to transfer IDOC from R3 system to non sap system

    Hi Experts, Can you provide me Steps to configure EDI is used to transfer IDOC from R3 system to non sap system? Full points will be assigned. Thanks in advance! Sapna