Cannot Checkout a file from sharepoint 2013
hi everybody,
i have been following this link
http://office.microsoft.com/en-in/sharepoint-server-help/check-out-check-in-or-discard-changes-to-files-in-a-library-HA102803583.aspx
and when i select a file and say checkout it shows below error.
and User have full rights on site as well on document library, i have double checked and damn sure about this and documents are not even checkout.
Wierd thing is when i checkout multiple file (even 2 files) that worked like a charm, what might be the problem.
Please help me...
Hi,
Is there anything useful in the ULS log about this issue?
You can check the ULS log by following these links:
http://blogs.technet.com/b/fesiro/archive/2013/11/11/sharepoint-logging-and-troubleshooting-using-ulsviewer.aspx
http://blogs.c5insight.com/Home/tabid/40/entryid/190/All-About-SharePoint-2010-ULS-Logging.aspx
Best regards,
Patrick
Patrick Liang
TechNet Community Support
Similar Messages
-
Can't checkout Project files from SharePoint 2013
I have library with 'require checkout' set that contains mpp files. I have MS Project 2013 (SP1) installed locally.
If I choose edit for one of the mpp files, it simply opens in MS project as read-only and doesn't allow me to save it (only as a local copy). There's no option to check-out anywhere. Obviously I can check-out manually in SP before opening then check in again
afterward but it seems clearly wrong that I'm allowed to click "Edit", make changes, but then be unable to save back to SP again (even if you switch back to SP to check-out, Project still thinks you've opened it Read Only and won't let you save back
to SP).
What am I missing?Hi Dylan,
Didn't you have this message just above the ribbon in MS Project 2013?
Using Project Server 2013, MS Project by default opens projects in read-only mode, the user having to intentionnally click on the "check-out" button to check it out. That being said, I'm not sure if the behavior is the same with a project plan opened from
a SharePoint librairy but it is worth checking this point.
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS | -
Can't open Excel files from Sharepoint 2013
I am having an issue with opening Excel files from SharePoint 2013. If I click on an excel file it comes up with the error below.
If I click Try again I get the message below also:
If I try to open Word or PDF files they open correctly in the appropriate client and I have the option of checking them out and editing them. Any ideas why this would only be happening to Excel files?
Thanks,
ShaunHi Shaun,
I understand that the Excel files cannot be opened from SharePoint in Microsoft Excel.
Can these files be viewed in the browser?
I recommend to download a copy of the files with issue and then open them in Excel to see if the issue still occurs.
If above cannot work, I recommend to repair Office.
Best regards.
Thanks
Victoria Xia
TechNet Community Support -
Cannot download any files from Sharepoint site to Samsung Note 2
Hi,
Can anybody tell me why a user would be able to download files to their samsung note 2 phone from email etc, but not from a SharePoint 2013 website that they have been authenticated for?
thanks,
SherazadHi Sherazad,
Please provide more information about the issue.
Firstly ensure the file could be open from PC machine. Could you open the file from mobile browser? If you couldn’t download to mobile device, did you receive any error message? Does the issue occurs to all user or all mobile device?
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support -
Can't open MS Word .doc files from SharePoint 2013 document library?
Hello,
I have uploaded some MS Word files with .doc extension into a SharePoint 2013 document library, but they don't open when clicked. I can do a number of things to the file, like view and edit properties, download and other things, but it does not
open up when mouse clicked. There are PDF files in the document library and they open up just fine. Any ideas?
I should add that MS Word 2010 .docx files can not be opened either.
Thanks.
PaulHi,
Whether you use office 2013.
Considering this .doc file can be smoothly opened in Office if you downloaded it to your local, it indicates that the Word document and Microsoft Word doesn’t have any problems. The issue may be caused by the compatibility between Office
and your site.
1.Check whether you have the SharePoint OpenDocuments Class add on enabled at first.
Internet Explorer >Tools iron > Manage add-ons >
Choose to Show All add-ons. Find SharePoint OpenDocuments Class and make sure it’s enabled.
2.go to Compatibility view settings > add your SharePoint site to compatibility view
3.go to Internet Options,
Advanced > Reset… > Check Delete personal settings and reset
Security > Trusted sites > sites > add SharePoint sites to trusted sites
4.If it doesn’t work, please open Word, go to Options > Trust Center > Trust Center Settings > Protected View > Uncheck all.
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support -
Hi All,
I am facing issue while accessing reports from SharePoint sites and below is the error message.
Report Server has encountered a SharePoint error. ---> Microsoft.ReportingServices.Diagnostics.Utilities.SharePointException: Report Server has encountered a SharePoint error. ---> Microsoft.SharePoint.SPException: Virus Found: ---> System.Exception:
For more information about this error navigate to the report server on the local server machine, or enable remote errors (Fault Detail is equal to Microsoft.ReportingServices.ServiceContract.RsExceptionInfo).
Error message shows "Virus Found", so we have disabled the antivirus scanning (Symantec Protection for real time scanning) and it started working.
We have tried to add ".rdl" and ".rsds" files in the exception, but didn't work. Noticed that issue is happening when we enabled the option "Scan the item when download".
Please suggest how we can rectify the issue without disabling any Symantec settings.
Thanks,
AnoopHi Anoop,
Not sure this option "Scan the item when download" of Symantec will do what action, you may want to get more info from symantec, it seems you have posted in symantec official forum
here, I would recommend to keep an eye on updates there.
Thanks
Daniel Yang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
Is there any way to deploy the Sandbox solution .wsp file to sharepoint 2013 online publishing site using powershell or CSOM or any other way?
Hi,
According to your post, my understanding is that you wanted to deploy sandboxed solution .wsp file to sharepoint 2013 online.
"Add-SPSolution" command is not available in SharePoint Online management shell. So, we cannot use PowerShell to update and deploy a solution in SharePoint Online environment. Meanwhile, here is index of Windows PowerShell for SharePoint Online
cmdlets for your reference:
http://technet.microsoft.com/en-us/library/fp161364.aspx
You can CSOM to deploy solution using helper class from CodePlex. The activation code is as follows: SandboxSolutions.ActivateSolution(siteCollectionURl, cookies, "solution_name.wsp");
About the Client Side Object Model (CSOM), it is a development related issue, we have a specific support channel for the SharePoint developers, so I recommend you go to our MSDN forum for further assistance.
Here is a similar thread for you to take a look at:
http://community.office365.com/en-us/forums/156/t/197404.aspx
In addition, if you would like to upload and activate sandbox solution manually, you can refer to:
http://community.office365.com/en-us/forums/154/p/64010/244496.aspx#244496
Best Regards,
Linda Li
Linda Li
TechNet Community Support -
Disable Edit Report Option from SharePoint 2013 PowerView Dasboard
Hi All,
I have PowerView Dashboard in Sharepoint 2013, In a Preview Bar there are three options i.e. File, Edit Report, Full Screen.
The requirement is disable only Edit Report Option from preview bar not all.
Please help me if there is any possibility for the same.Hi,
Based on your description, you want to disable the edit report option from SharePoint 2013 PowerView Dasboard.
There is a workaround:
You can change the permission of the report. You should upload the report to a SharePoint library and set a user have read-only permission of the report. When the user open the report and save the changes, it will have error. The user cannot edit the report.
The article below is about change the report permission in order to disable the edit option.
http://parasdoshi.com/2013/10/30/a-note-about-edit-report-button-seen-on-power-view-in-sharepoint/
Best regards
Sara Fan
TechNet Community Support -
Word Viewer will not open documents from Sharepoint 2013 in IE11
I've run into an issue while trying to open documents from SharePoint 2013 after upgrading to IE11. My organization uses Word Viewer with the compatibility pack and all other Word documents (local files, intranet hosted) will open with no problems. When
trying to open a Word document from SharePoint the Word Viewer will open, but the file does not. We have verified that all Windows Updates are installed. We have tried opening SharePoint in Compatibility View and Enterprise Mode. We have re-downloaded the
latest version of Word Viewer and reinstalled it along with the compatibility pack. If we open the SharePoint site in Explorer view and then open a Word document it will open in Word Viewer with no problem. Excel and PowerPoint documents open from SharePoint
with no problem. This is only affecting Word documents with Word Viewer. When using the full version of Word the documents open fine. Within SharePoint we have tried activating the site collection feature "Open Document In Client Applications by Default"
but it made no difference. We're completely at a loss how to make this work as there doesn't seem to be much information specifically pertaining to issues with Word Viewer.Hi Victoria.
1. The PCs do not have Microsoft Office installed, nor are we using the Office Web Apps. "Word Viewer" means the Microsoft Word Viewer application available here (http://www.microsoft.com/en-us/download/details.aspx?id=4) that is available
free for read-only viewing of Word documents.
2. There are no errors when I open Word docs in Word Viewer. The Word Viewer application launches after clicking a Word document link in Sharepoint, but there is no file open in it. When that happens the IE11 Sharepoint window on the taskbar is flashing
yellow, but when I click back to it there are no messages or alerts to click on.
3. This issue does occur with all Word documents (.doc, .docx) in SharePoint. However, it does not occur when opening Word documents in the Word Viewer when they are local files or through IE11 from a non-SharePoint website like our local intranet.
Those files will open with no problem in Word Viewer.
4. I will try to get a screenshot, but we are working on creating images for deployment and I don't currently have a machine configured the same way. I'll work on reconfiguring one and post a screenshot.
Thank you for your help! -
Hi
I've been encountering the problem of Office files failing to open from SharePoint 2013 libraries with the prefix of 'ms-excel:ofv|u|' etc. in the url. Following the
helpful questions and answers in the forum, I've identified the likely cause as the fact that my main Office installation is 2010, but I also have installed OneDrive for Business 2013 (which I need in order to sync document libraries with my local drive).
The solution I've seen suggested elsewhere of deactivating the SharePoint integration of Office 2013 components fails for two reasons: there is no way (or at least, I can't find one) of deactivating SharePoint integration probably because, deactivating
SharePoint integration would likely stop the syncing of libraries/folders.
One thing that I have noticed in my case that I've not seen mentioned elsewhere is that if I right-click a document and select 'open in new tab/window' the required
document opens directly in the relevant office package. I don't know if this is a useful observation, but it seems to be new information.
My question is, is there a way I can continue to sync libraries and open Office documents directly in Office 2010? My thoughts are possible changes to registry settings
(which I can do, but don't know enough to find the correct ones myself) or (re)installation of software in some appropriate order to leave the correct settings.
I have 'repaired' my Office 2010 installation without any observed affect on behavior.
Thanks
Ray
(I've just seen a suggestion that Office 2010 SP2 may fix this issue. I've requested to test this, but whilst this may fix my problem, rolling it out to
other users may be more problematic. In the meantime, other suggestions of solutions are welcome)Hi,
According to your description, it is a good way to do a test about office 2010 SP2, here is an article about this issue- limitations of using the OneDrive for Business sync app with Office 2010 applications , it may help you.
http://office.microsoft.com/en-us/sharepoint-help/solve-problems-youre-having-with-the-onedrive-for-business-sync-app-HA104047973.aspx
Paul Shui
Microsoft Online Community Support
Please remember to click “Mark as Answer?on the post that helps you, and to click “Unmark as Answer?if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread -
Sorry, we couldn't open...Error opening office documents from SharePoint 2013 in the desktop applications
One of our Managers encounters the error 'A problem occurred while accessing the Office document cache. Do you want to repair this problem?'
Then When he says yes it give a warning that the cache will be backed up and replaced
Then it says 'A new office document Cache has been created...'
Then it loads this cache with an error
Then After all that the next time he tries to open the document it says is encountered "Sorry, we couldn't open 'URL."
We have Reinstalled office 2013 on the users PC repaired the cache numerous times
Followed - http://office.microsoft.com/en-gb/word-help/manually-rename-the-office-document-cache-HA101848838.aspx
Updated Lync to 2013 leaving Access as the only office 2010 application (required for legacy systems access)
Repair installed office 2010 and office 2013 again
The SharePoint site has been added to the trusted sites list and the set up assistant run from office 365
And the issue remains the Same all other users including some who also have Access 2010 for legacy systems access have no Issues OS is windows 7 32 Bit browser is IE 9
Office 365 said
Reply by Rachel Zhang MSFT Support
Hi Alex,
From your description, I notice that the issue is related to Office client. We would like to help you, but I’m sorry that our forum does not focus on this scenario and has limited resources regarding it. However, we have a dedicated support forum where
the support engineers will help you with the issues about Office client:
Microsoft Office Community:
http://answers.microsoft.com/en-us/office/forum/office_2013_release?tm=1365567547805
Feel free to sign in to the Office community and click Participate->Ask a Question to post the question with the relevant information.
Microsoft Office Community:
Feel free to sign in to the Office community and click to post the question with the relevant information.
Office team said
Hello Alex,
Thank you for posting your query in Microsoft Office Community.Check if other excel works fine
Do you have any script\macro in excel file
Check if all application pool on all servers are running
both office and IE should be same build (64 or 32 bit)
what is the error message in ULS log and Event viewer
If this helped you resolve your issue, please mark it Answered -
Extracting documents from Sharepoint 2013 Content Database
harepoint 2013 stores documents in the WSS_Content database in a table called DocStreams.
Up until Sharepoint 2010, files where stored in a single row in a VarBinary column. Since Sharepoint 2013, files are stored in multiple rows using Shredded Blob storage.
Does anyone know how I can piece together the files from the shredded storage in c#?
I have found many exampled online to extract files from SharePoint 2010 and earlier but they only support a files content being stored in 1 row.Just wondering, can't you attach the database in a new site and access documents? As I know, in SharePoint 2013 they have changed architecture to manage versioning. In pre-SharePoint 2013 every individual versions was a duplicate copy of the document
- which would increase db size and would make it difficult to move documents in the cloud. So in SharePoint 2013 they use delta concept - where if you edit a document which creates a new version, the version is the delta (changes) to previous version.
Thanks,
Sohel Rana
http://ranaictiu-technicalblog.blogspot.com -
Pulling .xlsx files from Sharepoint Using ssis
Hi,
I need to create package to pull the .xlsx files from sharepoint and load into another server and make the package automated everyday. I was not familiar with SSIS stuff. I came to know it can be done by using file task
and FTP, but not able to figure it out the configuration setting that should be used in the tasks.
Can anybody suggest the procress for this task?
Thanks,
Sri Harsha.
BALUSUSRIHARSHAHi Sri,
These sites are right.
SharePoint exposes file retrieval via the HTTPWebResponse interface only. So the FTP Task cannot help you in this case.
I know it may be not easy coding in C# without programming skills but one day you need to start as SSIS without C# or VB is not fully usable anyways.
Luckily there is this community wiling to help you for free and a ton of examples already on the web.
If you could try to modify the code from http://blogs.msdn.com/b/sowmyancs/archive/2007/09/15/how-to-download-files-from-a-sharepoint-document-library-remotely-via-lists-asmx-webservice-sps-2003-moss-2007.aspx so it makes sense in application to what you
need to achieve that would be great.
If you get issues, do not hesitate to post on our forum.
Arthur
MyBlog
Twitter -
Just bought a new cámara olympus OM E-1 and find that I can not download my fotos with
Lightroom 4.4. Lightroom does not accept the format ORF. any help please!Thanks John you have been a great help! I will see what suits me best!
Enviado desde mi iPad margaret.
El 09/11/2013, a las 07:33, John Waller <[email protected]> escribió:
Re: LR4.4: Cannot open Raw files from Olympus OM E-1 was:Adobe lightroom.
created by John Waller in Photoshop Lightroom - View the full discussion
DNG Converter.
Read all about it here
http://www.adobe.com/products/photoshop/extend.displayTab2.html
It's a way of opening the Raw files from your OM-D EM-1 without having to upgrade to LR5.
In short, you open the Raw files from the camera uing the DNG converter, convert the Raw files to DNGs. Then you edit the DNG files in LR4.4.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5828160#5828160
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5828160#5828160
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5828160#5828160. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Lightroom at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0. -
Word 2013 slow to open documents from SharePoint 2013
Hi all,
Word 2013 running on a Windows 8.1 client is take 2 or more minutes to open a document from SharePoint 2013. Excel takes less then 10 seconds from the same site in SharePoint.
I have remove all proxy configuration from IE, clear the Auto Detect Settings. Added the URL's to the intranet zone and disabled all IE addons. I have also performed a reset on IE, reinstall of Office and tried a number of workstations. All have the same
issue. The document just take forever to open.
Checking with Fiddler, I can see 3 requests hit the SharePoint server then nothing... after a few minutes the document opens.
Any ideas?
Cheers
CraigHi Craig,
For troubleshooting your issue, please take steps as below:
1.Open IE, go to "Tools > Internet Options > Connections > Lan Settings" and uncheck "Auto Detect Proxy".
2.From the File tab in Word application, select Options and then click on Advanced and then in the Display section of the dialog, check the box for
Disable hardware graphics acceleration.
3.Edit the registry at HKEY_CLASSES_ROOT\Word.Document.12\shell\Open and deleting the ddeexec key.
Also please have a look at the article:
https://msdn.microsoft.com/en-us/library/office/jj230106.aspx?f=255&MSPPError=-2147217396
Reference:
http://sharepoint.stackexchange.com/questions/19390/what-is-slowing-the-opening-of-office-documents/9203
http://answers.microsoft.com/en-us/office/forum/office_2013_release-word/office-2013-products-slow-to-open/baf311b0-6a47-498b-9836-39e0c8b94c46?page=1
Best Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]
Maybe you are looking for
-
Can not see records after was given select on table
Hello, I have a database 10gV2 and I 'grant select on table1 to user1'. When user1 logged on, he can not see any data from table1. He can desc table1 but when doing a select count(*) from user99.table1 , a zero record returned. Or select * from user9
-
How do I add a recurring event to repeat on the fifth recurring day of the month, for example, an event that only happen on the fifth Sunday of the month for those months that have a fifth Sunday?
-
Help required in bapi or function module..
Hi, Is there any BAPI or Function Module to get cost center description by giving cost center as input parameter? please suggest me.Thanks in advance. Regards, Sandy.
-
Diaplay data of only one UOM in Query
Hello All, Please help me with the below: we have a field with mixed UOM i.e. Hours and Minutes. How do we, in the query select only one UOM to display the data? Thanx in advance.
-
Books: Sorting PDF's / Using info fields with PDF's
Since it is possible to manage PDF's in iTunes, I've been importing quite a few (well, just drag and drop). So far, I just changed the Name field to the title of the article or book, the Artist field to the authors name, and picked an appropriate gen