Cannot choose just the server during custom installation

I am seeing this queer behavior with the server811_win32.exe installation file.
In Graphical mode, If I choose Custom mode, I cannot choose to install only the
server.
Everytime I check the box 'Weblogic Server', it by default checks Workshp and
Workshop runtime environment.
This seriously hinders server only installation and installing workshop in production
is not an option.
file used = server811_win32.exe

You will be able to install Weblogic Server alone in the coming release 8.1 sp2.
Thanks.
"skv" <[email protected]> wrote:
>
I am seeing this queer behavior with the server811_win32.exe installation
file.
In Graphical mode, If I choose Custom mode, I cannot choose to install
only the
server.
Everytime I check the box 'Weblogic Server', it by default checks Workshp
and
Workshop runtime environment.
This seriously hinders server only installation and installing workshop
in production
is not an option.
file used = server811_win32.exe

Similar Messages

  • The restor pocess did not succeed because your computer cannot connect to the server - Windows Server 2012 R2 Essentials Experience

    Hi all
    I've been running Windows Server 2012 R2 with the Essentials Experience in test for a Windows 8.1 client environment, on an HP ProLiant MicroServer N54L. Overall I've found the Essential Experience set-up over WHS2011 and WHSv1 okay; still looking to extract
    any real value over the former versions.
    This box has been up and running for a few months now, with client backups of a Win 8.1 box scheduled and running successfully every day. However when trying to conduct any file restores from the backups, to the client, I receive an error dialog once I go
    through motions from the Dashboard:
    On the 'Devices' tab, right-click the appropriate client and select 'Restore files or folders for the computer'
    'Restore Files of Folders' dialog pops up, asking me to 'Choose a backup' from the list of all the backups that have run
    Select any one in the list - have tried numerous backups; automatic, manual, etc. same result every time
    Brings up the dialog to 'Choose a volume', choose either C: or D: partitions of the same fixed drive - again, no difference which one I choose, the outcome is the same
    'Opening the volume' dialog starts, with progress bar, runs to about 4% complete the pops up the dialog 'The restore process did not succeed'. Full error in the dialog, "The restore process did not succeed because your computer cannot connect to the
    server. Make sure that the computer is connected to the networkm and then try again
    If my computer cannot connect to the server - how can I get that far? How can I open the dashboard, select a client, select from a list of backups, select a volume to restore, etc. What is going on here?

    Hi,
    Please check if a "host" entry for the server is added to the client. For more detailed information, please refer to the threads below:
    Unable to Restore files or folders from a Client Backup
    http://social.technet.microsoft.com/Forums/en-US/d1d001bd-20c5-4f09-861d-526c31567963/unable-to-restore-files-or-folders-from-a-client-backup
    Can't restore anything
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/98e269b5-2bd1-449e-a213-e386ae15266f/cant-restore-anything?forum=winserveressentials
    Regards,
    Mandy
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • InitCatalog:Cannot connect to the server

    Hello,
    We have installed BPC 7.0 in 2-server architecture.
    First server is VM - Windows 2003 32 bit, it contains
    - BPC
    - Reporting Services
    - Integration Services
    Second server is physical. Windows 2003 64 bit, it contains
    - SQL Server 2005
    - OLAP Server 2005
    We have installed also a separate client: admin and office tools.
    During opening Excel 2007 (provider Microsoft.ACE.OLEDB.12.0 is installed on first server) we got error:
    InitCatalog:Cannot connect to the server 'XXXXX'. The server is either not started or too busy.
    After clicking the OK button in the error message, I was further notified that Account dimension member cannot be downloaded and so on.
    It looks like similar problem as in this thread: InitCatalog:Cannot connect to the server 'XXXXX'.
    But it wasn;t solved.
    We got also the same error during processing cubes/dimensions from BPC Administrator.
    Can anybody help us solving this problem?
    Thanks in advance.

    Did you install ADOMD.NET and also the QFE into application server?
    ADOMD.Net-KB893091-v8.00.0991-x86.EXE
    you can download this from follow link:
    http://www.microsoft.com/downloads/details.aspx?familyid=790d631b-bff9-4f4a-b648-e9209e6ac8ad&displaylang=en
    You have to reboot the server after the installation of this QFE.
    Regards
    Sorin Radulescu

  • BPC Excel: The system cannot connect to the server. There might be network

    Hi Guys,
    I get the following error when i try to connect to BPC Excel: The system cannot connect to the server. There might be network or security issue.
    This only happen on clients machines, I have installed the client tools on the server and tested, i can connect to Excel but not on the machine. My MS office version is the same as the one on the server. BPC is ver 5.04
    Has anyone experienced the same problem.
    your help will be greatly appreciated.

    Let me summarize your issue to see if I may help.  If I cannot, then you will need to work with SAP Support on the connection problem.
    - You have a single or multi-server setup?
    - Installed using BPC 5.1 SP3, (or 5.0.502) correct?
    - You can enter the BPC on the server, both via BPC Excel and BPC Admin?
    - When you initiate BPC Admin on your client, so can connect to the Server and perform Admin operations?
    - When you initiate BPC for Excel, and walk through the connection wizard, you cannot connect to the server?
    - When you are in the Connection Wizard, are you using a path or a Server designation?
    - Is the system on a single domain?
    - When you added users to the Admin Security profile, they were selected from a DOMAIN?
    - You have processed security and assigned ALL TASKS currently and processed the MEMBER ACCESS profiles, yes?
    After all of this, have you uninstalled 1 BPC client, cleared the ProgramFiles/BPC folder, and deleted the local stored BPC information?  If you haven't, just for simplification, I would attempt this process.
    You also hae read all the SAP Support Notes regarding using Excel2007 with BPC and the issues you may experience?
    Please let me know and maybe we can help.

  • I cannot turn up the volume during a phone call

    My "+" button on the side of my phone is broken and I cannot turn up the volume during a phone call. Is there any other way to control the volume during phone calls?

    After trying everything I gave up.
    But just 5 minutes ago... I dropped by phone on the floor, not from high, just sitting on my chair at my pc desk...
    And someone just called and i can hear them!!!
    So...
    for me, i guess it was really a piece inside that wasn't making a good connection and well...
    I accidentally fixed it...
    But I wouldn't reccomend you to drop it on purpose.
    But maybe go to your nearest apple store, ask them to open it and see if everythin is in place inside?
    cheers

  • I cannot connect to the server – screen sharing, Server Preferences,...

    hello
    I have a problem with xserver. Everything seems to be working ok, however, one day system started to break down.
    I cannot connect to the server through *screen sharing* neither through internet, nor through local net. Even after restart login wont shows up.
    I cannot also connet to the *Server Preferences* (Unable to authenticate to the Open Directory master.)
    Sometimes I cannot also connect to the *Server Admin* (but after restart it works, however, Server Preferences are unavailable).
    SSH works ok.
    Nor repair permission, neither verify disk, or update for OS X server 10.6.4 worked.
    system log periodicaly enters this message:
    Jul 14 23:24:35 xserve WindowServer[5091]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    Jul 14 23:24:35 xserve com.apple.WindowServer[5091]: Wed Jul 14 23:24:35 xserve.sk WindowServer[5091] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    Jul 14 23:24:36 xserve com.apple.launchd[1] (com.apple.RemoteDesktop.agent[5096]): posix_spawn("/System/Library/CoreServices/RemoteManagement/ARDAgent.app/Content s/MacOS/ARDAgent", ...): No such file or directory
    Jul 14 23:24:36 xserve com.apple.launchd[1] (com.apple.RemoteDesktop.agent[5096]): Exited with exit code: 1
    Jul 14 23:24:36 xserve com.apple.launchd[1] (com.apple.RemoteDesktop.agent): Throttling respawn: Will start in 10 seconds
    Jul 14 23:24:36 xserve loginwindow[5085]: Login Window Started Security Agent
    Jul 14 23:24:36 xserve loginwindow[5085]: Login Window - Returned from Security Agent
    Jul 14 23:24:36 xserve loginwindow[5085]: AuthorizationRef returned errAuthorizationDenied. Exiting.
    Jul 14 23:24:36 xserve com.apple.loginwindow[5085]: AuthorizationRef returned errAuthorizationDenied. Exiting.
    Jul 14 23:24:36 xserve com.apple.launchd[1] (com.apple.loginwindow): Throttling respawn: Will start in 3 seconds
    Jul 14 23:24:36 xserve com.apple.ReportCrash.Root[4982]: 2010-07-14 23:24:36.505 ReportCrash[4982:350b] Saved crash report for ManagedClient[5099] version ??? (???) to /Library/Logs/DiagnosticReports/ManagedClient2010-07-14-232436localhost.crash
    can you advice me?
    thanks

    Hi Shannon McLain,
    Kindly let us know if there is any specific error message that you are getting while installing it.
    Here is what you can try:
    Creative Cloud Help | Download, install, update, or uninstall apps
    https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
    https://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html
    Kindly share the results once done.
    Thanks,
    Atul Saini

  • TS3899 I tap on mail and I get a message that "cannot connect to the server" what does that mean and how do I fix it?

    Cannot connect to the server.  What to do?

    Hey LauradellLaurawidder,
    Thanks for the question. I understand you are experiencing issues with mail on your iPad. The following article may help to resolve your issue:
    iOS: Troubleshooting Mail
    http://support.apple.com/kb/TS3899
    Try these basic troubleshooting steps first
    1. Tap Safari and attempt to load a webpage (try any webpage). If you can load a webpage, then your device has Internet access. If you are unable to load a webpage, follow these troubleshooting steps.
              - Try to use an alternate Internet connection if available:
                        1. Try a different Wi-Fi connection
                        2. If your iOS device has an active cellular data plan, tap Settings > Wi-Fi and turn off Wi-Fi.
                        3. If the affected email account is provided by your Internet provider, see if your issue is resolved while connected to your home Wi-Fi network.*
    2. Log in to your email provider's website to ensure that the account is active and the password is correct.
    3. Restart your iOS device.
    4. Delete the affected email account from your device.
              - Tap Settings > Mail, Contacts, Calendars.
              - Choose the affected email account, then tap Delete Account.
              - Add your account again.
    * If you are only able to use your email account while connected to your home network, this may be a limitation put in place by your email service provider. For further support, please contact your email service provider directly.
    Additionally, if you are using a Gmail account you may find the following steps helpful:
    iOS: Gmail account will not connect to Gmail server
    http://support.apple.com/kb/TS3058
    Thanks,
    Matt M.

  • "Form cannot connect to the server" -- what to do?

    Although 90+% of our users can submit FormsCentral forms just fine, some get stuck after hitting "Submit" and see an Adobe error page saying the form cannot connect to the server.  We love FormsCentral because our non-profit has limited technical capability ... what should we do or tell the user to do in these cases?
    Thanks!

    For those users with problems submitting, do you know what browser version and operating system they are using?  Does your form contain any file attachment fields?  Can you provide a link to your form?  If you do not want provide this information in the forum, you can send it as an email using the Actions panel on the right.
    -DevRandy

  • The client cannot connect to the server

    we just installed the boe but found that the client cannot connect to the server.
    server: windows server 2008
                 boe xi3
    client:    window xp sp3
    the server and client are in same dns
    all components are work in server but client.
    any idea on this?
    ps: i can ping the server name successful.
    thanks
    ada
    Edited by: Ada_Wei on Oct 29, 2010 10:12 AM

    Can you please try to stop and disable the Windows firewall service on your client machine?
    WHich client do you use and which error message do you get exactly?
    Regards,
    Stratos

  • What does it mean "Cannot connect to the server" ?

    We actually have two issues.  For some reason Yahoo email stopped downloading on my wife's droid razzr.  The section to alter the frequency to check for email is greyed out so you can't get in to it.  Perhaps that has something to do with it.  It is a "new" replacement phone since the original one quit working mid-text a couple weeks ago (phone only 5 months old).  Both of my phones seem to get the "Cannot connect to the server" notice every now and then.  Could use some help.  Thanks

    Hey LauradellLaurawidder,
    Thanks for the question. I understand you are experiencing issues with mail on your iPad. The following article may help to resolve your issue:
    iOS: Troubleshooting Mail
    http://support.apple.com/kb/TS3899
    Try these basic troubleshooting steps first
    1. Tap Safari and attempt to load a webpage (try any webpage). If you can load a webpage, then your device has Internet access. If you are unable to load a webpage, follow these troubleshooting steps.
              - Try to use an alternate Internet connection if available:
                        1. Try a different Wi-Fi connection
                        2. If your iOS device has an active cellular data plan, tap Settings > Wi-Fi and turn off Wi-Fi.
                        3. If the affected email account is provided by your Internet provider, see if your issue is resolved while connected to your home Wi-Fi network.*
    2. Log in to your email provider's website to ensure that the account is active and the password is correct.
    3. Restart your iOS device.
    4. Delete the affected email account from your device.
              - Tap Settings > Mail, Contacts, Calendars.
              - Choose the affected email account, then tap Delete Account.
              - Add your account again.
    * If you are only able to use your email account while connected to your home network, this may be a limitation put in place by your email service provider. For further support, please contact your email service provider directly.
    Additionally, if you are using a Gmail account you may find the following steps helpful:
    iOS: Gmail account will not connect to Gmail server
    http://support.apple.com/kb/TS3058
    Thanks,
    Matt M.

  • Solution to iCloud "cannot connect to the server" upgrade issue

    I have just switched my iPhone 4s to a new carrier. (iOS 7.0.4)
    Once the previous carrier (finally) unlocked its activation grip, all went well through restoring the phone. One issue remained:
    iCloud wanted me to "agree to new terms of service" and would not allow me to do anything else with it. But when I tapped the button to "read the terms of service" the dialogue "Cannot connect to the server" popped up.
    The solution turned out to be relatively painless:
    Make sure you have backed up any Photo Streams that are present on your iPhone. (I use Aperture for this.)
    At the bottom of the iCloud settings screen (Settings->iCloud) tap the "Delete Account" button. You will be warned that photos, documents, etc., will be deleted from your iPhone. As long as you are confident of your backups, tap "Delete" in the warning dialogue.
    If you have "Find My iPhone" enabled, you will need to enter your Apple ID and password to turn it off. This is the only way to gain access to this setting that I could find.
    Cold-boot your iPhone (Power + Home). I suppose you don't HAVE to do this, but seemed like A Good Thing.
    Return to the iCloud settings screen and turn iCloud back on. Enter your Apple ID and password. Double-check that "Find My iPhone" is enabled, if desired.
    You will be asked to allow iCloud to merge documents, contacts, and so on with the information on your iPhone. Do this as desired. (I do not yet use iCloud for most of this.) Your Photo Stream will eventually show up again by itself.
    Hope this helps, and I'm all ears if there is an easier and potentially safer solution!
    Matt

    I have the same problem. Did you solve it already?

  • Sharepoint list dataheet view error "Cannot connect to the server at this time. You can continue working with this list, but some data may not be available"

    I have a List which is having around 14000 items in it.while opening that list in datasheet view it is giving error .
    Below is a summary of the issue:
    After selecting datasheet view beow error occurs:
        "Cannot connect to the server at this time.  You can continue working with this list, but some data may not be available."
        "Unable to retrieve all data."
        The item counts displays say 100 out of 14000 items.
    Exporting List to excel is giving only 2000 records out of 14000 records.
    Other Observations   -  
    This is happening to only one list on the site .There are other lists in the site whose no. of records is equal to 8000 to 9000.They are working absolutely fine without any error.
    Also, If I am saving this list as a template and creating another list with it ,then it is working absolutely fine with 14000 records,so the issue does not seem to be related with no. of records as the template list is working fine.
    I have checked the Alternate access mapping setting ,its fine.
    It should not be related to lookup,datefield or any other column as the list created from it template is working fine with all these columns.
    I checked below links also ,but doesn't seem to work in my case.
    http://social.technet.microsoft.com/forums/en-US/sharepointadminprevious/thread/974b9168-f548-409b-a7f9-a79b9fdd4c50/
    http://social.technet.microsoft.com/Forums/en-US/smallbusinessserver/thread/87077dd8-a329-48e8-b42d-d0a8bf87b082
    http://social.msdn.microsoft.com/Forums/en-US/sharepointgeneral/thread/dc757598-f670-4229-9f8a-07656346b9b0

    I have spent two days to resolve this issue. Microsoft has released two KBs with reference to this issue...but are not appearing in search results at the top.
    I am sharing my finding.
    1. First install the
    KB2552989 (Hopefully you might have already installed it. The KB detetcts it and informs the user.)
    2. Then update registry by adding new key for data fetch timeout as mentioned inKB2553007
    These two steps resolved the issue in our environment. Hope it might help others as well.
    Pradip T. ------------- MCTS(SharePoint 2010/Web)|MCPD(Web Development) https://www.mcpvirtualbusinesscard.com/VBCServer/paddytakate/profile

  • Jabber for Mac 9.2.1 Cannot communicate with the server

    Hi All,
    I'm using Webex and the Jabber for Mac 9.2.1 client that was automatically pushed.  I see "Cannot communicate with the server" when I attempt to login. 
    The same credentials work correctly when using the 8.6.5 client version.  I've attached the problem report file.
    I would appreciate some guidance on what I need to do to get this to work.
    Cheers,
    Steve

    We've seen this with a few of our users as well. All started noticing having issues Friday morning. As this is a hosted service for us via webex we had our engineers call in to Jabber support. Cisco performed a modification to their account and they were able to connect again. No SRV records were messed with.
    ***EDIT*** - This appears to have been caused by a certificate issue. The Trusted Root Certificate for QuoVadis expired and was not renewed on some machines. 
    Go here: https://www.quovadisglobal.com/QVRepository/DownloadRootsAndCRL.aspx
    Install the Cert for : QuoVadis Root CA2 (in windows, download as DER>right click file>install)
    Jabber should connect now. The issue was in SSL validation with the appropriate hosted servers.

  • WIJ 20002 If you cannot reconnect to the server, close Web Intelligence

    Unexpected error. If you cannot reconnect to the server, close Web Intelligence and start again. (WIJ 20002), we are getting this error whenever we try to create a new report using WebI. Specific observations are this happens mainly with IE7 users. IE6 users can create reports without any issues. We have latest Java 6 version.
    This error come specially when the number of objects selected are more than 10. We have Linux OS, version AS4 32 bit. Please let me know if anyone have any solution.
    Thanks,
    Subhasis

    Hi Srini,
    We are using BOXI R3.1 FP 1.8. We are still in testing phase. Our go live is getting postponed because of several issues out of which this is one.
    Please let me know if you have any solution.
    Regards,
    Subhasis

  • Can't save BISM file pointing to excel sheet (data source). ErrMsg: "There were errors found while validating the page: Cannot connect to the server or database."

    Hi,
    Me and a collegue is administrering our new enterprise BI portal in SharePoint 2013 (On Premise) and have a problem with using a specific Excel file including general ledger data as data source through a BISM file.
    This particular BISM file can't be saved without getting the error message "There were errors found while validating the page: Cannot connect to the server or database."
    BISM files against other Excel sheets and sources (for example SSAS tabular databases) works well.
    Can anyone help us pinpointing whats wrong here, this is a really important stakeholder in our organization requesting this reporting?
    Cheers!

    Hi E.SWARD ,
    My self created a Power pivot excel then i want to use this excel to create BI file . Still i am getting the same error . Pls help me to resolve this issue
    Cannot connect to the server or database.
    I am getting the similar error , if i use Tabular analysis server instance .
    Subhash

Maybe you are looking for