Cannot choose UDF created in profit center for XLR

Hi,
Customer required additional analysis in profit center. We had created U_Outlettype and U_Salestype in Profit center but it is not able to make these 2 UDF in profit center under Tools\User defined field.
May I know how to make it visible for selection and grouping in report composer and report organizer?
Regards
Thomas

Hi ,
Are u able to see other UDF"s in XLR . means udf specific to profit center is not visible or all udf are not visible .
if only profit centre is not visible u have choose alternate wy either QLD,ALD or Crydtal reprot.
Rgds,
Permraj

Similar Messages

  • Should I create profit center for non-profit department?

    Dear Experts,
    Should I create profit center for non-profit department since I have cost-center for them (since I need to assgn the profit center in each cost center)?
    regards,
    Abraham

    Dear Abraham,
            You are saying that there is no Profit Generation in department. Then which Profit Center will handle the costs for this department. There should be a responsible Profit Center for this. Pl Check with your client.
    I'll give you one example:
    Basically Warehouse doesn't have revenue. But they have cost centers. All cost are beared by Head Office. In this situation.
    Cost Center belongs to Warehouse will maintained by Head Office Profit Center..
    Regards,
    Balaji Bhonsle

  • Create new Profit Center?

    Hi,
    We want to create 2 new profit centers. What are the necessary steps to be consider before create a new profit center? Is it reqd to create Profit Center Group, Standard Heirarchy, Dummy Profit Center etc., I am very new i.e., y am asking basic things.
    Is there any way to copy from existing profit center? or can i copy profit center group from existing PC group in TC: KCH1? If i can do this i think all profit centers are copied to new PC group. How to achive this?
    Thanks

    Hi
    1. set controlling area (OKKS)
    2.maintain controlling area settings(OKE5)
    3.create dummy profit center(KE59)
    4.set control parameters for actual data(1KEF)
    5.maintain plan versions(OKEQ)
    6.allow balances to be carried forward(2KET)
    7.maintain standard hierarchy(KCH4 in IMG  or KCH1 in Easy Access)
    8.Create profit center(KE51)
    9.Assignment of profit centers in cost centers(KS02)
    10.creation of revenue elements(KA01 or FS00)
    11.maintain automatic account assignment of revenue elements(OKB9)
    12.defone number ranges for local documents(GB02) both for actual and plan documents.
    13.choose additional balance sheet and P&L accounts(3KEH)
    These are the configuration steps.
    Standard hierarchy and dummy profit centers must to be created before creation of profit centers.
    Regards
    Venkat

  • Difference in Profit center for GR/IR account in MIGO & MIRO Transaction

    1) We have created material 106267 with material type ROH. We have assigned profit center 1001052999 (common profit center) to material.
    2) We have created WBS element MUM-RIV002.SS.RC.RF with profit center 1001052002.
    3) We have created PO 4000000236 for account assignment category u2018Qu2019 for the above material with WBS element MUM-RIV002.SS.RC.RF   . After posting GRN for PO 4000000236 we have identified that for GR/IR account profit center is taken from material master & for stock account profit center is taken from WBS element.
    Please find the below Flow
    In MIGO
    Entry
    Accounting Document number in Entry View
    5000001125
    PSKY          G/L Code      Description
             Amount
         Curr.
              Profit Center
         WBS element
    89          231101     RAW MATERIAL STOCK     2,000.00     INR          1001052002     MUM-RIV002.SS.RC.RF
    96          162101     GR/IR-Material     -2,000.00     INR          1001052999     MUM-RIV002.SS.RC.RF
    Document number in Ledger View
    L.item     PK     SG     Account     Description         Amount     Curr.     Tx     Profit Ctr     WBS element
    1     89          231101     RAW MATERIAL STOCK     2,000.00     INR          1001052002     MUM-RIV002.SS.RC.RF
    2     96          162101     GR/IR-Material     -2,000.00     INR          1001052999     MUM-RIV002.SS.RC.RF
    3     50          162001     InterSegment Clrg     -2,000.00     INR          1001052002     
    4     40          162001     InterSegment Clrg     2,000.00     INR          1001052999     
      It should take profit center from WBS element for GR/IR account & Stock account but for GR/IR account profit center is taking form material master & for stock account profit center is taking from WBS element.
    MIRO
    Entry
    Accounting Document number Entry View
    5100000657
    PK     SG     Account     Description         Amount     Curr.     Tx     Profit Ctr     WBS element
    31          100000     Ambuja Cement Ltd     -1,996.00     INR     V4          
    86          162101     GR/IR-Material     2,000.00     INR     V4     1001052002     MUM-RIV002.SS.RC.RF
    40          254001     VAT Receivable     80     INR     V4          
    50          172103     TDS PAYABLE -194C     -42     INR               
    50          176101     WCT-TDS payable     -42     INR               
    Document number in Ledger View
    PK     SG     Account     Description         Amount     Curr.     Tx     Profit Ctr     WBS element
    31          160100     CRS-Domestic Supp     -1,996.00     INR     V4     1001052002     
    86          162101     GR/IR-Material     2,000.00     INR     V4     1001052002     MUM-RIV002.SS.RC.RF
    40          254001     VAT Receivable     80     INR     V4     1001052002     
    50          172103     TDS PAYABLE -194C     -42     INR          1001052002     
    50          176101     WCT-TDS payable     -42     INR          1001052002     
    In the MIRO Accounting Document profit center for [162101] GR/IR-Material A/C has taken from WBS element
    Please note that we are using document splitting with Profit center is mandatory
    We have created same scenario for Cost center. After posting the GRN profit center is taken from cost center for both GR/IR account in MIGO & MIRO accounting documents.
    Plez help

    Hello
    ANy suggestion for question & if solved do let me know

  • B/S Profit Center for GR/IR clearing act in MIGO is fine but not in MIRO

    Hi Experts,
    Can you please help on the below as am posting this after reviewing the existing postings:
    We are in ECC 6.0 and implementing Classic GL.
    While posting MIGO and MIRO the GR/IR clearing account (B/S account) is getting the Profit enter from expense line item.
    Requirement is to have the B/S profit center from 3KEH.
    As an option we created one Substitution so getting B/S profit center only for MIGO but MIRO is still getting the exp Profit center.
    How to get the B/S profit center for MIRO also?
    Thanks,
    Sudha

    Hello
    ANy suggestion for question & if solved do let me know

  • Profit center document created but profit center not updated in FI document

    Hi Experts,
    I have a strange issue; we created FI document via billing document (SD) where in profit center document got created but profit center is not updated in FI document.
    We have separate table to identify the profit center by customer.
    Please let know what could be the cause or reason for this kind of scenario
    Thanks,
    VK

    Hi Krishna,
    Though ur question seems very old, but now i got the same requirement as like you.
    So if you remeber what needs to be done for this issue thats very good help to me.
    My Requirement is : I have created Service Entry Sheet by referring PO and while releasing this Service Entry Sheet system is generating MIGO Doc and FI documents in background.
    And I have updated PERNR (Persnoal No.) in MSEG-SGTXT by using enhancment but it's not populating in BSEG-SGTXT.
    And I found an internal table while debugging i.e ; like ACCIT (not exactly ,similar to this ) where i have updated pernr and sgtxt but same thing will not available in FI Doc display (BSEG-PERNR or BSEG-SGTXG)
    So could you plz suggest what needs to be done to achieve this. Im assuming that, is it possible through BTE (Business Transaction Events) ?.  if yes, plz tell me how to proceed.
    Thanks
    Madhan

  • Unable to create the Profit center groups

    Hi,
    We have created new company codes in R3Dev and also created the
    validation rules for the same. We have assigned the Set ID's to the
    validation rules. These Set ID's gets created when profit center groups
    are created for the new company codes.
    We have transported the company code configuration settings and the
    validation rules to R3QA.
    Now in R3QA, when I try to create the profit center groups in KCH5N for
    the new company codes, it says "the group already exists".This is
    caused due to the SET ID's which also got transported along with
    validation rules. I have checked the table 'SETHEADER" which shows the
    SET ID's for the new company codes.
    Could you please a solution to resolve this issue.
    Thanks
    Rakesh

    Hi Mohan,
    Since Set Id's have moved to quality along with vaidation rules, I am to create the profit center groups, as it says the group already exists. I believe the set Id's need the master data maintained in R3Q, before they are transported. Since this is not maintained, with the transport, the data is sitting for Set Ids at the table level (Table: SETHEADER),  because of which I am to unable to create the profit center groups.
    Thanks,
    Rakesh

  • Assigning profit center for vendor to vendor transfer (F-02)

    Hi,
    We are having two profit centers and would like to generate financial statments each profit center wise for which we must assign profit center for each entry passed.
    Now we want to transfer balance from one vendor to another(which is a normal scenario in our case) with tcode F-02, but it doesn't allow us to select profit center  and at the same time it gives  an error that profit center not selected.
    kindly guide us
    Sanjay

    Hi,
    You have not mentioned teh Verison you are in.
    Assuming you are in ECC 6.0 (As the error posted seems to be more relevant for this version) and document splitting is enabled, you cannot transfer from vendor to vendor or customer as profit centres in recon accounts are not taken by system.
    So you need to take a intermediary GL account for first transferring from one vendor to  GL account where you will be giving the profit center in teh gl line item and save. After that you use same GL account to transfer th amount to other Vendor account.
    The system derives the proft center from GKL line item to teh AR/AP line items. Use F-44 or F-32 as the case may be.
    Check document type in F-02 if you are using this as document type also controls the psoting in new GL.
    Reward if useful.
    Sarma

  • Substitution for profit center for credit line item

    Hi
    There is some common material sold in two segments. (Example head phone is sold from cell phone segment and computer segment). These segments are created as a division also for SD purpose.
    Now for determining the profit center, i am using the validation rule. Logic: if the division in sales order is cell phone, entry should be posted in cell phone division. So my revenue and PGI will be in cell phone segment.
    When head phone was procured, it was procured in computer segment (division). So my inventory credit should be the posted to computer segment (via profit center) and consumption should be posted to cell phone division (for matching with revenue). Hence i want some substitution rule for posting to two different profit center ( or segments, determined by profit center) at the time of PGI. Debit (consumption) should be to the profit center for cell phone and credit (inventory posting) should be to profit for computer.
    Please help.
    Edited by: Meenu_ND on Jun 23, 2011 8:02 PM

    Hi
    In an ideal scenario, profit center is derived from material master. Since, your business is such that profit center is nto known as unique for a material master, try using the following BADI to derive profit center at the time of Goods movement document. You should not maintain profit center in material master in such a case.
    MB_MIGO_ITEM_BADI
    MB_MIGO_BADI
    Regards
    Sanil Bhandari

  • Open profit center for reconciliation account

    Hi experts
    I need to display the field profit center for reconciliation account and I check  Field Status Group  (OBC4 & OB41). The field Profit center is mandatory.The new legder is not activate
    But when I use the FB01 , the profit center is not available 
    So It s possible to display the field Profit center for reconciliation account without the New Ledger ??
    Thanks for your help

    Hi
    If you are referring to Asset Recon account - You can not enter any Pr Ctr manually in it...
    Just ensure
    1. Cost Center is maintained in Asset master
    2. Maintain KOSTL in T code ACSET for Acq Posting and transaction type *
    3. Create APC account as Statistical cost element
    Whether New GL or not, PC in Asset recon a/c depends on these settings.... You cant enter it manually in the APC acount
    Regards
    Ajay M

  • Profit center for Open items

    Hi,
    We have a stanndard report for customer evaluation is 'RFDOPR00'.This report is working based on company code level.
    But our client needs a custom report which should work based on Profit center.
    for that I have created a report for customer evaluation taking profit center value from BSID table. But in this table no PRCTR value filled except  0099990000.
    So in this case, how can we get profit center value to make a report.
    Kindly provide me a solution for this...
    Thank you!!!
    Regards,
    Anilkumar.G

    Hi,
    Thanks for your replies...
    Actually the standard report program is using LDB 'DDF' and inside source code we have PRCTR. But not able to find the table name (which are having open items) where PRCTR value will be available..
    Regards,
    Anilkumar.G

  • Create Substitution Profit Center when MIRO (invoice)

    Dear all
    How to create substitution profit center and this the requiredment:
    When i create invoice MIRO there is tax account 11701105 and i want to substitute profit center in that account,
    i have create substitution like this, in GGB1 ,>financial accounting> line item >step 1>SYST-TCODE = 'MIRO' AND BSEG-HKONT = '11701105' AND BSEG-WERKS = '1000
    why this not worked, did i miss other config?
    please help
    Best Regards
    adit

    Hi Aditya
    thats true.. MIRO line items do not always have PLANT... You can refer the following notes for this
    0000032654 High level automatic account assignment
    0000105024 Automatic a/c assignment (OKB9) does not work
    0000409520 Goods/invoice receipt: Default account assignment ignored
    If your idea is to populate a Profit center based on Plant, then you would need to use a FI Substitution with user exit RGGBS000 and write your code to fetch the WERKS from preceeding MM document and populate WERKS as well as PRCTR based on it...
    But, before you do this, let me ask you a question.. Are you not using Document splitting in New GL? If you use it, PRCTR gets populated always in all the line items..
    Regards
    Ajay M

  • Create Substitution Profit Center when billing

    Dear all
    How to create substitution profit center and this the requiredment:
    When i create billing VF01 there is tax account 21117106 and i want to substitute profit center in that account, since i maintain 3KEH.
    i have create substitution like this, in GGB1 ,>cost accounting> line item >step 1>COBL-SAKNR = '21117106' and COBL-VKORG = '3000'
    why this not worked, did i miss other config? how to assign tcode in substitution, like just valid in VF01?
    please help
    Best Regards
    adit

    Hi Aditya
    Tax account is a balance sheet account which will never flow into CO at all.. So, your CO subst will never be called for this line item
    Subst in CO can be written only for Cost Elements
    Subst in EC-PCA can be written for populating profit center in Sales orders
    But, Subst in FI can be written for all GL accounts, especially the balance sheet ones
    Hope, it is clear... You need to write subst in FI, and not in CO for VAT line item
    Regards
    Ajay M

  • How to create a profit center group using MDG-F?

    Given that there is a controlling area CA created in ECC. under which there is a standard profit center hierarchy let us call it ABCD created. Under ABCD, there is a Profit Center Group PCG01 already created in ECC. Now what steps (or screens) I should go through on MDG-F if I want to create another profit center group PCG02 that should be placed under PCG01? Thanks for your help.

    Hi ,
    First of all you need to create Profit Center from Create Change Request by selecting the change request type of PCTR Single Processing.
    Complete the all approval of the Profit center. Once your PCTR gets activated , it will go & sits into MDG tables ONLY.
    You have to make a replication setup of Local replication for replicating this created PCTR via MDG to the ECC Back end so that you can see the same data in the CEPC table.
    Once you are done with this, use Collective Processing form Change Request of PFCG role where you can create your PCTRG & PCTRH . You can assign the PCTR to PCTRG & PCTRH accordingly.
    Hope this answers your all questions.
    Best Regards,
    Kaustubh

  • Default Profit center for balance sheet account

    Dear All
    I've problem when i display accounting document in billing, there is no profit center information in GL account VAT,since document spliting is not activated,so I maintain default profit center for balance sheet account (3KEH),.
    can anybody tell me why this problem raised? where that i have missed the configuration?
    Thanks And Regards
    Adit

    Hi Vijay,
    Good day!
    I would like to seek your advice regarding the default profit center for Balance Sheet Account:
    We have this issue that BS account defualted to a certain profit center: I have done several testings but still cannot find why the BS account defaulted to the profit center
    1. I have checked the FAGLBK3EH and the BS account in which PC defaulted is not maintained in this tcode.
    2. also check the OBBH and the document does not contain any cost object wherein a profit center can be derived. also checked  substitution, either both of this code does not defines the profit center im searching for.
    Can you please advice some directions where to check and why certain profit center defaulted to balance sheet account.
    Your advice is greatly appreciated.
    Janice

Maybe you are looking for