Cannot claim points; Salesman might have messed it up.
Yesterday I purchased a Macbook Pro from a Best Buy location. Never bought big from best buy before so I never had a credit card. Applied, got it, and put the laptop on the card. He asked before if i was a rewards member and i said no, but id like to be one so I can get the points for this big purchase as well. He said it would take a while in store so just do it at home and I can claim them on here. I tried to do that but this system said I cannot add the points as I was not a member before the purchase.'
That was what I was attempting to do at the store, yet he said it would be better to do it online.
Is there any way I can claim these points? It's obviously a hefty amount and would be disheartening to see them go to waste. I have the receipt, number, everything.
Hello jkdecke01,
Welcome to the Best Buy forum.
If you were approved for a Best Buy credit card when you purchased the MacBook Pro, then you would have been automatically enrolled in the My Best Buy program. You in-fact might actually have two My Best Buy accounts if you went onto BestBuy.com to enroll in the program, as directed by the cashier. We can look into merging any active accounts you may have if they share the same information (name, phone #, mailing address).
With that having been said, I am going to send you a private message so that I can go over your My Best Buy account(s) with you to ensure the MacBook Pro you purchased is properly attached and to see about possibly merging any active accounts. You can check your private messages by logging into the forum and clicking on the yellow envelope located at the top of the page. I look forward to further speaking with you.
My Best Buy™ Program Terms
Thank you for posting and for being a My Best Buy™ member.
Derek|Social Media Specialist | Best Buy® Corporate
Private Message
Similar Messages
-
Hi there, I have the same problem as I've read on some of the questions posted although the answers hasn't been much help to me with regards to the big exclamation mark on iphotos when I try to open my photos. For some reason my photo files was stored in my document folder and you can imagine how that must have looked, very unorganized. When I tried to move the photos from there to another file that is just for my photos. Now I can't open them in iphotos and although I tried to undo my mistake it still doesn't want to work.. is there any way I can find all the images on my computer and fix my problem by storing them somewhere else without damaging the files?
Please help me find all my photos as I would be shattered if I were to loose any...
Thank you.Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD -
[SOLVED] GTK might have messed up my laptop screen
After performing a pacman update with sudo pacman -Syyu and restarting I got a grayish fading line across the screen of my laptop (Lenovo T530).
http://i.imgur.com/KEBMZsX.png
http://i.imgur.com/24tyeoF.png
[jorgemancia@arch ~]$ sudo pacman -Syyu
:: Synchronizing package databases...
core 121.6 KiB 172K/s 00:01 [######################] 100%
extra 1803.5 KiB 2.49M/s 00:01 [######################] 100%
community 2.6 MiB 13.4M/s 00:00 [######################] 100%
archlinuxfr 20.1 KiB 108K/s 00:00 [######################] 100%
:: Starting full system upgrade...
:: Replace gtk2-xfce-engine with extra/gtk-xfce-engine? [Y/n] y
:: Replace gtk3-xfce-engine with extra/gtk-xfce-engine? [Y/n] y
resolving dependencies...
looking for conflicting packages...
Packages (164) alsa-lib-1.0.29-1 alsa-plugins-1.0.29-2 alsa-utils-1.0.29-1
avahi-0.6.31-15 bluez-utils-5.29-1 cairo-1.14.2-1
cantarell-fonts-0.0.16-2 chromium-41.0.2272.101-1
conky-1.9.0-6 curl-7.41.0-1 dhclient-4.3.2-1
dialog-1:1.2_20150225-1 e2fsprogs-1.42.12-2 elfutils-0.161-3
evince-3.14.2-1 exo-0.10.4-3 ffmpeg-1:2.6.1-1
filezilla-3.10.2-1 firefox-36.0.4-1 flashplugin-11.2.202.451-1
garcon-0.4.0-1 gcc-4.9.2-4 gcc-libs-4.9.2-4
gdk-pixbuf2-2.31.3-1 geoip-database-20150303-1 git-2.3.4-1
glib2-2.42.2-1 gnome-themes-standard-3.14.2.3-1 gnupg-2.1.2-2
grep-2.21-2 gsfonts-20150122-1 gst-plugins-ugly-1.4.5-2
gstreamer0.10-ugly-0.10.19-14
gstreamer0.10-ugly-plugins-0.10.19-14
gtk-update-icon-cache-2.24.27-1 gtk-xfce-engine-2.10.1-1
gtk2-2.24.27-1 gtk2-xfce-engine-3.0.1-2 [removal]
gtk3-xfce-engine-3.0.1-2 [removal] harfbuzz-0.9.40-1
harfbuzz-icu-0.9.40-1 imagemagick-6.9.1.0-1 inkscape-0.91-6
intellij-idea-libs-1:14.1-1 iproute2-3.19.0-1 ipython-3.0.0-4
ipython2-3.0.0-4 kmod-20-1 libcups-2.0.2-3 libdrm-2.4.60-2
libevdev-1.4-1 libgpod-0.8.3-4 libidn-1.30-1
libimobiledevice-1.2.0-1 libmariadbclient-10.0.17-2
libmm-glib-1.4.6-1 libmpc-1.0.3-1 libnewt-0.52.18-1
libplist-1.12-1 libproxy-0.4.11-5 libreoffice-fresh-4.4.1-2
librsvg-1:2.40.8-1 libseccomp-2.2.0-1 libsigc++-2.4.1-1
libssh-0.6.4-1 libtasn1-4.3-1 libtool-2.4.6-1
libusbmuxd-1.0.10-1 libutil-linux-2.26.1-3 libvdpau-1.1-1
libwebp-0.4.3-1 libx11-1.6.3-1 libx264-2:144.20150223-1
libxdmcp-1.1.2-1 libxfce4ui-4.12.1-1 libxfce4util-4.12.1-1
libxfcegui4-4.10.0-4 libxfont-1.5.1-1 libxvmc-1.0.9-1
linux-3.19.2-1 llvm-libs-3.6.0-3 logrotate-3.8.9-1
lua-5.2.4-1 man-pages-3.81-1 mariadb-10.0.17-2
mariadb-clients-10.0.17-2 mesa-10.5.1-2 mesa-libgl-10.5.1-2
mono-3.12.1-1 nano-2.4.0-1 openssl-1.0.2.a-1 orage-4.10.0-2
p7zip-9.38.1-1 pacman-mirrorlist-20150315-1 patch-2.7.5-1
phpmyadmin-4.3.12-1 polkit-gnome-0.105-2 poppler-0.31.0-1
poppler-glib-0.31.0-1 python-3.4.3-2
python-setuptools-1:14.3.1-1 python2-cffi-0.9.2-1
python2-cryptography-0.8.1-1 python2-setuptools-1:14.3.1-1
randrproto-1.4.1-1 ristretto-0.8.0-1 shadow-4.2.1-3
slang-2.3.0-1 thunar-1.6.6-2 thunar-archive-plugin-0.3.1-5
thunar-media-tags-plugin-0.2.1-2 thunar-volman-0.8.1-1
tzdata-2015b-1 unzip-6.0-10 upower-0.99.2-2
util-linux-2.26.1-3 vlc-2.2.0-2 wget-1.16.3-1
xdg-utils-1.1.0.git20150302-1 xf86-video-intel-2.99.917-4
xfburn-0.5.2-2 xfce4-appfinder-4.12.0-1
xfce4-battery-plugin-1.0.5-4 xfce4-clipman-plugin-1.2.6-2
xfce4-cpufreq-plugin-1.1.1-2 xfce4-cpugraph-plugin-1.0.5-3
xfce4-datetime-plugin-0.6.2-4 xfce4-dict-0.7.1-1
xfce4-diskperf-plugin-2.5.5-1 xfce4-eyes-plugin-4.4.4-1
xfce4-fsguard-plugin-1.0.2-4 xfce4-genmon-plugin-3.4.0-3
xfce4-mailwatch-plugin-1.2.0-5 xfce4-mixer-4.11.0-2
xfce4-mount-plugin-0.6.7-3 xfce4-mpc-plugin-0.4.5-1
xfce4-netload-plugin-1.2.4-2 xfce4-notes-plugin-1.7.7-7
xfce4-notifyd-0.2.4-2 xfce4-panel-4.12.0-1
xfce4-power-manager-1.4.4-1 xfce4-quicklauncher-plugin-1.9.4-10
xfce4-screenshooter-1.8.2-2 xfce4-sensors-plugin-1.2.6-2
xfce4-session-4.12.1-2 xfce4-settings-4.12.0-3
xfce4-smartbookmark-plugin-0.4.6-1
xfce4-systemload-plugin-1.1.2-2 xfce4-terminal-0.6.3-2
xfce4-time-out-plugin-1.0.2-1 xfce4-timer-plugin-1.6.0-3
xfce4-verve-plugin-1.0.1-2 xfce4-wavelan-plugin-0.5.12-1
xfce4-weather-plugin-0.8.5-2 xfce4-xkb-plugin-0.7.1-2
xfconf-4.12.0-1 xfdesktop-4.12.1-2 xfwm4-4.12.2-1
xorg-font-util-1.3.1-1 xorg-fonts-misc-1.0.3-3
xorg-server-1.17.1-4 xorg-server-common-1.17.1-4
xorg-xinit-1.3.4-2 xterm-316-1
Total Download Size: 461.91 MiB
Total Installed Size: 1806.55 MiB
Net Upgrade Size: 16.53 MiB
:: Proceed with installation? [Y/n] y
:: Retrieving packages ...
tzdata-2015b-1-any 214.8 KiB 300K/s 00:01 [######################] 100%
gcc-libs-4.9.2-4-x86_64 2.4 MiB 4.44M/s 00:01 [######################] 100%
kmod-20-1-x86_64 108.4 KiB 0.00B/s 00:00 [######################] 100%
glib2-2.42.2-1-x86_64 2.1 MiB 41.5M/s 00:00 [######################] 100%
libidn-1.30-1-x86_64 185.7 KiB 0.00B/s 00:00 [######################] 100%
libseccomp-2.2.0-1-... 55.8 KiB 0.00B/s 00:00 [######################] 100%
libutil-linux-2.26.... 295.2 KiB 96.1M/s 00:00 [######################] 100%
e2fsprogs-1.42.12-2... 757.1 KiB 43.5M/s 00:00 [######################] 100%
openssl-1.0.2.a-1-x... 2.6 MiB 39.5M/s 00:00 [######################] 100%
shadow-4.2.1-3-x86_64 1071.6 KiB 43.6M/s 00:00 [######################] 100%
util-linux-2.26.1-3... 1631.3 KiB 36.2M/s 00:00 [######################] 100%
libtasn1-4.3-1-x86_64 104.8 KiB 34.1M/s 00:00 [######################] 100%
libtool-2.4.6-1-x86_64 395.9 KiB 64.4M/s 00:00 [######################] 100%
curl-7.41.0-1-x86_64 721.3 KiB 44.0M/s 00:00 [######################] 100%
iproute2-3.19.0-1-x... 510.1 KiB 49.8M/s 00:00 [######################] 100%
dialog-1:1.2_201502... 167.7 KiB 54.6M/s 00:00 [######################] 100%
libmpc-1.0.3-1-x86_64 62.8 KiB 0.00B/s 00:00 [######################] 100%
gcc-4.9.2-4-x86_64 22.6 MiB 17.3M/s 00:01 [######################] 100%
gnupg-2.1.2-2-x86_64 1840.7 KiB 40.9M/s 00:00 [######################] 100%
grep-2.21-2-x86_64 194.4 KiB 0.00B/s 00:00 [######################] 100%
linux-3.19.2-1-x86_64 55.5 MiB 15.8M/s 00:04 [######################] 100%
logrotate-3.8.9-1-x... 33.7 KiB 0.00B/s 00:00 [######################] 100%
man-pages-3.81-1-any 5.3 MiB 21.9M/s 00:00 [######################] 100%
nano-2.4.0-1-x86_64 388.6 KiB 37.9M/s 00:00 [######################] 100%
pacman-mirrorlist-2... 3.3 KiB 0.00B/s 00:00 [######################] 100%
patch-2.7.5-1-x86_64 79.2 KiB 0.00B/s 00:00 [######################] 100%
alsa-lib-1.0.29-1-x... 407.5 KiB 56.9M/s 00:00 [######################] 100%
alsa-plugins-1.0.29... 60.8 KiB 0.00B/s 00:00 [######################] 100%
alsa-utils-1.0.29-1... 928.1 KiB 37.8M/s 00:00 [######################] 100%
avahi-0.6.31-15-x86_64 417.1 KiB 67.9M/s 00:00 [######################] 100%
bluez-utils-5.29-1-... 836.1 KiB 27.2M/s 00:00 [######################] 100%
libdrm-2.4.60-2-x86_64 159.5 KiB 0.00B/s 00:00 [######################] 100%
elfutils-0.161-3-x86_64 684.8 KiB 47.8M/s 00:00 [######################] 100%
llvm-libs-3.6.0-3-x... 7.9 MiB 19.2M/s 00:00 [######################] 100%
libxdmcp-1.1.2-1-x86_64 24.9 KiB 0.00B/s 00:00 [######################] 100%
libx11-1.6.3-1-x86_64 2.0 MiB 35.8M/s 00:00 [######################] 100%
mesa-10.5.1-2-x86_64 6.5 MiB 17.9M/s 00:00 [######################] 100%
mesa-libgl-10.5.1-2... 3.0 KiB 0.00B/s 00:00 [######################] 100%
harfbuzz-0.9.40-1-x... 237.0 KiB 77.2M/s 00:00 [######################] 100%
cairo-1.14.2-1-x86_64 719.8 KiB 41.4M/s 00:00 [######################] 100%
libcups-2.0.2-3-x86_64 299.6 KiB 97.5M/s 00:00 [######################] 100%
gdk-pixbuf2-2.31.3-... 623.2 KiB 43.5M/s 00:00 [######################] 100%
gtk-update-icon-cac... 11.8 KiB 0.00B/s 00:00 [######################] 100%
randrproto-1.4.1-1-any 26.6 KiB 0.00B/s 00:00 [######################] 100%
gtk2-2.24.27-1-x86_64 6.8 MiB 18.0M/s 00:00 [######################] 100%
xdg-utils-1.1.0.git... 51.3 KiB 0.00B/s 00:00 [######################] 100%
python-3.4.3-2-x86_64 14.6 MiB 18.3M/s 00:01 [######################] 100%
xorg-font-util-1.3.... 27.9 KiB 0.00B/s 00:00 [######################] 100%
libxfont-1.5.1-1-x86_64 120.0 KiB 0.00B/s 00:00 [######################] 100%
chromium-41.0.2272.... 44.0 MiB 16.3M/s 00:03 [######################] 100%
lua-5.2.4-1-x86_64 197.8 KiB 48.3M/s 00:00 [######################] 100%
conky-1.9.0-6-x86_64 161.7 KiB 52.6M/s 00:00 [######################] 100%
dhclient-4.3.2-1-x86_64 663.5 KiB 38.1M/s 00:00 [######################] 100%
gsfonts-20150122-1-any 2.3 MiB 30.4M/s 00:00 [######################] 100%
poppler-0.31.0-1-x86_64 982.0 KiB 40.0M/s 00:00 [######################] 100%
poppler-glib-0.31.0... 204.6 KiB 28.5M/s 00:00 [######################] 100%
libproxy-0.4.11-5-x... 82.4 KiB 0.00B/s 00:00 [######################] 100%
evince-3.14.2-1-x86_64 2.2 MiB 38.3M/s 00:00 [######################] 100%
libxfce4util-4.12.1... 99.0 KiB 0.00B/s 00:00 [######################] 100%
xfconf-4.12.0-1-x86_64 148.3 KiB 0.00B/s 00:00 [######################] 100%
libxfce4ui-4.12.1-1... 226.4 KiB 31.6M/s 00:00 [######################] 100%
exo-0.10.4-3-x86_64 559.5 KiB 42.0M/s 00:00 [######################] 100%
libvdpau-1.1-1-x86_64 53.2 KiB 0.00B/s 00:00 [######################] 100%
libssh-0.6.4-1-x86_64 133.3 KiB 32.5M/s 00:00 [######################] 100%
libx264-2:144.20150... 361.9 KiB 118M/s 00:00 [######################] 100%
ffmpeg-1:2.6.1-1-x86_64 6.5 MiB 17.9M/s 00:00 [######################] 100%
firefox-36.0.4-1-x86_64 39.8 MiB 16.6M/s 00:02 [######################] 100%
flashplugin-11.2.20... 8.3 MiB 19.6M/s 00:00 [######################] 100%
garcon-0.4.0-1-x86_64 113.8 KiB 27.8M/s 00:00 [######################] 100%
geoip-database-2015... 732.5 KiB 42.1M/s 00:00 [######################] 100%
git-2.3.4-1-x86_64 4.0 MiB 19.9M/s 00:00 [######################] 100%
gst-plugins-ugly-1.... 220.6 KiB 71.8M/s 00:00 [######################] 100%
gstreamer0.10-ugly-... 159.9 KiB 0.00B/s 00:00 [######################] 100%
gstreamer0.10-ugly-... 90.8 KiB 0.00B/s 00:00 [######################] 100%
gtk-xfce-engine-2.1... 28.2 KiB 0.00B/s 00:00 [######################] 100%
harfbuzz-icu-0.9.40... 5.5 KiB 0.00B/s 00:00 [######################] 100%
imagemagick-6.9.1.0... 2.2 MiB 38.7M/s 00:00 [######################] 100%
libsigc++-2.4.1-1-x... 67.4 KiB 0.00B/s 00:00 [######################] 100%
inkscape-0.91-6-x86_64 14.2 MiB 18.2M/s 00:01 [######################] 100%
python-setuptools-1... 314.7 KiB 102M/s 00:00 [######################] 100%
python2-setuptools-... 293.5 KiB 71.7M/s 00:00 [######################] 100%
libevdev-1.4-1-x86_64 48.7 KiB 0.00B/s 00:00 [######################] 100%
libplist-1.12-1-x86_64 42.8 KiB 0.00B/s 00:00 [######################] 100%
libusbmuxd-1.0.10-1... 19.0 KiB 0.00B/s 00:00 [######################] 100%
libimobiledevice-1.... 143.3 KiB 20.0M/s 00:00 [######################] 100%
libgpod-0.8.3-4-x86_64 417.1 KiB 40.7M/s 00:00 [######################] 100%
libmariadbclient-10... 4.2 MiB 19.6M/s 00:00 [######################] 100%
libmm-glib-1.4.6-1-... 292.4 KiB 95.2M/s 00:00 [######################] 100%
slang-2.3.0-1-x86_64 682.6 KiB 39.2M/s 00:00 [######################] 100%
libreoffice-fresh-4... 90.8 MiB 16.3M/s 00:06 [######################] 100%
librsvg-1:2.40.8-1-... 118.6 KiB 0.00B/s 00:00 [######################] 100%
libwebp-0.4.3-1-x86_64 260.8 KiB 84.9M/s 00:00 [######################] 100%
libxfcegui4-4.10.0-... 234.1 KiB 76.2M/s 00:00 [######################] 100%
libxvmc-1.0.9-1-x86_64 20.2 KiB 0.00B/s 00:00 [######################] 100%
mariadb-clients-10.... 935.9 KiB 39.7M/s 00:00 [######################] 100%
mariadb-10.0.17-2-x... 12.8 MiB 17.2M/s 00:01 [######################] 100%
mono-3.12.1-1-x86_64 31.4 MiB 16.9M/s 00:02 [######################] 100%
xfce4-panel-4.12.0-... 574.3 KiB 40.1M/s 00:00 [######################] 100%
orage-4.10.0-2-x86_64 1475.2 KiB 40.0M/s 00:00 [######################] 100%
p7zip-9.38.1-1-x86_64 1832.5 KiB 38.1M/s 00:00 [######################] 100%
python2-cffi-0.9.2-... 117.3 KiB 0.00B/s 00:00 [######################] 100%
python2-cryptograph... 296.2 KiB 96.4M/s 00:00 [######################] 100%
thunar-1.6.6-2-x86_64 1009.7 KiB 42.9M/s 00:00 [######################] 100%
thunar-archive-plug... 32.4 KiB 0.00B/s 00:00 [######################] 100%
thunar-media-tags-p... 46.8 KiB 0.00B/s 00:00 [######################] 100%
thunar-volman-0.8.1... 108.9 KiB 0.00B/s 00:00 [######################] 100%
unzip-6.0-10-x86_64 125.2 KiB 0.00B/s 00:00 [######################] 100%
upower-0.99.2-2-x86_64 121.1 KiB 0.00B/s 00:00 [######################] 100%
vlc-2.2.0-2-x86_64 9.4 MiB 17.4M/s 00:01 [######################] 100%
wget-1.16.3-1-x86_64 479.6 KiB 66.9M/s 00:00 [######################] 100%
xf86-video-intel-2.... 643.6 KiB 31.4M/s 00:00 [######################] 100%
xfburn-0.5.2-2-x86_64 355.1 KiB 49.5M/s 00:00 [######################] 100%
xfce4-appfinder-4.1... 96.6 KiB 0.00B/s 00:00 [######################] 100%
xfce4-battery-plugi... 88.2 KiB 0.00B/s 00:00 [######################] 100%
xfce4-clipman-plugi... 113.6 KiB 0.00B/s 00:00 [######################] 100%
xfce4-cpufreq-plugi... 45.5 KiB 0.00B/s 00:00 [######################] 100%
xfce4-cpugraph-plug... 42.2 KiB 0.00B/s 00:00 [######################] 100%
xfce4-datetime-plug... 27.2 KiB 0.00B/s 00:00 [######################] 100%
xfce4-dict-0.7.1-1-... 131.0 KiB 0.00B/s 00:00 [######################] 100%
xfce4-diskperf-plug... 45.7 KiB 0.00B/s 00:00 [######################] 100%
xfce4-eyes-plugin-4... 37.3 KiB 0.00B/s 00:00 [######################] 100%
xfce4-fsguard-plugi... 60.7 KiB 19.7M/s 00:00 [######################] 100%
xfce4-genmon-plugin... 26.6 KiB 0.00B/s 00:00 [######################] 100%
xfce4-mailwatch-plu... 132.2 KiB 0.00B/s 00:00 [######################] 100%
xfce4-mixer-4.11.0-... 84.7 KiB 0.00B/s 00:00 [######################] 100%
xfce4-mount-plugin-... 64.4 KiB 0.00B/s 00:00 [######################] 100%
xfce4-mpc-plugin-0.... 31.1 KiB 0.00B/s 00:00 [######################] 100%
xfce4-netload-plugi... 45.8 KiB 0.00B/s 00:00 [######################] 100%
xfce4-notes-plugin-... 91.8 KiB 0.00B/s 00:00 [######################] 100%
xfce4-notifyd-0.2.4... 55.6 KiB 0.00B/s 00:00 [######################] 100%
xfce4-power-manager... 541.7 KiB 40.7M/s 00:00 [######################] 100%
xfce4-quicklauncher... 18.9 KiB 0.00B/s 00:00 [######################] 100%
xfce4-screenshooter... 126.3 KiB 41.1M/s 00:00 [######################] 100%
xfce4-sensors-plugi... 105.9 KiB 0.00B/s 00:00 [######################] 100%
xorg-xinit-1.3.4-2-... 15.7 KiB 0.00B/s 00:00 [######################] 100%
xfce4-session-4.12.... 594.6 KiB 41.5M/s 00:00 [######################] 100%
cantarell-fonts-0.0... 57.6 KiB 0.00B/s 00:00 [######################] 100%
gnome-themes-standa... 2.5 MiB 39.6M/s 00:00 [######################] 100%
xfce4-settings-4.12... 433.3 KiB 42.3M/s 00:00 [######################] 100%
xfce4-smartbookmark... 19.5 KiB 0.00B/s 00:00 [######################] 100%
xfce4-systemload-pl... 33.5 KiB 0.00B/s 00:00 [######################] 100%
xfce4-terminal-0.6.... 308.6 KiB 30.1M/s 00:00 [######################] 100%
xfce4-time-out-plug... 44.1 KiB 0.00B/s 00:00 [######################] 100%
xfce4-timer-plugin-... 42.5 KiB 0.00B/s 00:00 [######################] 100%
xfce4-verve-plugin-... 31.2 KiB 0.00B/s 00:00 [######################] 100%
xfce4-wavelan-plugi... 30.3 KiB 9.85M/s 00:00 [######################] 100%
xfce4-weather-plugi... 2.2 MiB 38.8M/s 00:00 [######################] 100%
xfce4-xkb-plugin-0.... 408.8 KiB 57.0M/s 00:00 [######################] 100%
xfdesktop-4.12.1-2-... 725.4 KiB 41.7M/s 00:00 [######################] 100%
xfwm4-4.12.2-1-x86_64 487.1 KiB 47.6M/s 00:00 [######################] 100%
xorg-fonts-misc-1.0... 6.5 MiB 18.0M/s 00:00 [######################] 100%
xorg-server-common-... 26.2 KiB 0.00B/s 00:00 [######################] 100%
xorg-server-1.17.1-... 1277.4 KiB 41.6M/s 00:00 [######################] 100%
xterm-316-1-x86_64 274.7 KiB 89.4M/s 00:00 [######################] 100%
filezilla-3.10.2-1-... 3.4 MiB 18.4M/s 00:00 [######################] 100%
intellij-idea-libs-... 15.0 KiB 3.65M/s 00:00 [######################] 100%
ipython-3.0.0-4-any 2.2 MiB 39.9M/s 00:00 [######################] 100%
ipython2-3.0.0-4-any 2.2 MiB 39.2M/s 00:00 [######################] 100%
libnewt-0.52.18-1-x... 91.7 KiB 0.00B/s 00:00 [######################] 100%
phpmyadmin-4.3.12-1-any 5.3 MiB 21.7M/s 00:00 [######################] 100%
ristretto-0.8.0-1-x... 190.7 KiB 0.00B/s 00:00 [######################] 100%
polkit-gnome-0.105-... 57.3 KiB 0.00B/s 00:00 [######################] 100%
(162/162) checking keys in keyring [######################] 100%
(162/162) checking package integrity [######################] 100%
(162/162) loading package files [######################] 100%
(162/162) checking for file conflicts [######################] 100%
(164/164) checking available disk space [######################] 100%
(1/2) removing gtk3-xfce-engine [######################] 100%
(2/2) removing gtk2-xfce-engine [######################] 100%
( 1/162) upgrading tzdata [######################] 100%
( 2/162) upgrading alsa-lib [######################] 100%
( 3/162) upgrading alsa-plugins [######################] 100%
( 4/162) upgrading gcc-libs [######################] 100%
( 5/162) upgrading kmod [######################] 100%
( 6/162) upgrading alsa-utils [######################] 100%
( 7/162) upgrading glib2 [######################] 100%
( 8/162) upgrading avahi [######################] 100%
( 9/162) upgrading libidn [######################] 100%
( 10/162) upgrading libseccomp [######################] 100%
( 11/162) upgrading libutil-linux [######################] 100%
( 12/162) upgrading e2fsprogs [######################] 100%
( 13/162) upgrading openssl [######################] 100%
( 14/162) upgrading shadow [######################] 100%
( 15/162) upgrading util-linux [######################] 100%
( 16/162) upgrading bluez-utils [######################] 100%
( 17/162) upgrading libdrm [######################] 100%
( 18/162) upgrading elfutils [######################] 100%
( 19/162) upgrading llvm-libs [######################] 100%
( 20/162) upgrading libxdmcp [######################] 100%
( 21/162) upgrading libx11 [######################] 100%
( 22/162) upgrading mesa [######################] 100%
( 23/162) upgrading mesa-libgl [######################] 100%
( 24/162) upgrading harfbuzz [######################] 100%
( 25/162) upgrading cairo [######################] 100%
( 26/162) upgrading libtasn1 [######################] 100%
( 27/162) upgrading libcups [######################] 100%
( 28/162) upgrading gdk-pixbuf2 [######################] 100%
( 29/162) upgrading gtk-update-icon-cache [######################] 100%
( 30/162) upgrading randrproto [######################] 100%
( 31/162) upgrading gtk2 [######################] 100%
( 32/162) upgrading xdg-utils [######################] 100%
New optional dependencies for xdg-utils
kde-cli-tools: for KDE Plasma5 support in xdg-open
kdebase-runtime: for KDE4 support in xdg-open
( 33/162) upgrading libtool [######################] 100%
( 34/162) upgrading python [######################] 100%
( 35/162) upgrading xorg-font-util [######################] 100%
( 36/162) upgrading libxfont [######################] 100%
( 37/162) upgrading chromium [######################] 100%
( 38/162) upgrading curl [######################] 100%
( 39/162) upgrading lua [######################] 100%
( 40/162) upgrading conky [######################] 100%
( 41/162) upgrading iproute2 [######################] 100%
( 42/162) upgrading dhclient [######################] 100%
( 43/162) upgrading dialog [######################] 100%
( 44/162) upgrading gsfonts [######################] 100%
Unknown Type 1 weight "normal"
Couldn't determine weight for Lucida G.pfb
Unknown Type 1 weight "normal"
Couldn't determine weight for Lucida Gr Regular.pfb
( 45/162) upgrading poppler [######################] 100%
( 46/162) upgrading poppler-glib [######################] 100%
( 47/162) upgrading libproxy [######################] 100%
New optional dependencies for libproxy
glib2: gsettings configuration module [installed]
js17: PAC proxy support - Mozilla based pacrunner [installed]
webkitgtk: PAC proxy support - Webkit based pacrunner
( 48/162) upgrading evince [######################] 100%
( 49/162) upgrading libxfce4util [######################] 100%
( 50/162) upgrading xfconf [######################] 100%
( 51/162) upgrading libxfce4ui [######################] 100%
( 52/162) upgrading exo [######################] 100%
( 53/162) upgrading libvdpau [######################] 100%
( 54/162) installing libssh [######################] 100%
( 55/162) upgrading libx264 [######################] 100%
( 56/162) upgrading ffmpeg [######################] 100%
( 57/162) upgrading filezilla [######################] 100%
( 58/162) upgrading firefox [######################] 100%
( 59/162) upgrading flashplugin [######################] 100%
( 60/162) upgrading garcon [######################] 100%
( 61/162) upgrading libmpc [######################] 100%
( 62/162) upgrading gcc [######################] 100%
( 63/162) upgrading geoip-database [######################] 100%
( 64/162) upgrading git [######################] 100%
( 65/162) upgrading gnupg [######################] 100%
( 66/162) upgrading grep [######################] 100%
( 67/162) upgrading gst-plugins-ugly [######################] 100%
( 68/162) upgrading gstreamer0.10-ugly [######################] 100%
( 69/162) upgrading gstreamer0.10-ugly-plugins [######################] 100%
( 70/162) installing gtk-xfce-engine [######################] 100%
( 71/162) upgrading harfbuzz-icu [######################] 100%
( 72/162) upgrading imagemagick [######################] 100%
( 73/162) upgrading libsigc++ [######################] 100%
( 74/162) upgrading inkscape [######################] 100%
( 75/162) upgrading intellij-idea-libs [######################] 100%
( 76/162) upgrading python-setuptools [######################] 100%
( 77/162) upgrading ipython [######################] 100%
New optional dependencies for ipython
python-pyzmq: for ipython qtconsole
( 78/162) upgrading python2-setuptools [######################] 100%
( 79/162) upgrading ipython2 [######################] 100%
New optional dependencies for ipython2
python2-pyzmq: for ipython qtconsole
( 80/162) upgrading libevdev [######################] 100%
( 81/162) upgrading libplist [######################] 100%
( 82/162) upgrading libusbmuxd [######################] 100%
( 83/162) upgrading libimobiledevice [######################] 100%
( 84/162) upgrading libgpod [######################] 100%
( 85/162) upgrading libmariadbclient [######################] 100%
( 86/162) upgrading libmm-glib [######################] 100%
( 87/162) upgrading slang [######################] 100%
( 88/162) upgrading libnewt [######################] 100%
( 89/162) upgrading libreoffice-fresh [######################] 100%
( 90/162) upgrading librsvg [######################] 100%
( 91/162) upgrading libwebp [######################] 100%
( 92/162) upgrading libxfcegui4 [######################] 100%
( 93/162) upgrading libxvmc [######################] 100%
( 94/162) upgrading linux [######################] 100%
>>> Updating module dependencies. Please wait ...
>>> Generating initial ramdisk, using mkinitcpio. Please wait...
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
==> Starting build: 3.19.2-1-ARCH
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [autodetect]
-> Running build hook: [modconf]
-> Running build hook: [block]
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
==> Generating module dependencies
==> Creating gzip-compressed initcpio image: /boot/initramfs-linux.img
==> Image generation successful
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
==> Starting build: 3.19.2-1-ARCH
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [modconf]
-> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: wd719x
==> WARNING: Possibly missing firmware for module: aic94xx
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
==> Generating module dependencies
==> Creating gzip-compressed initcpio image: /boot/initramfs-linux-fallback.img
==> Image generation successful
( 95/162) upgrading logrotate [######################] 100%
( 96/162) upgrading man-pages [######################] 100%
( 97/162) upgrading mariadb-clients [######################] 100%
( 98/162) upgrading mariadb [######################] 100%
( 99/162) upgrading mono [######################] 100%
(100/162) upgrading nano [######################] 100%
(101/162) upgrading xfce4-panel [######################] 100%
(102/162) upgrading orage [######################] 100%
(103/162) upgrading p7zip [######################] 100%
warning: directory permissions differ on /usr/share/doc/p7zip/MANUAL/
filesystem: 704 package: 755
warning: directory permissions differ on /usr/share/doc/p7zip/MANUAL/commands/
filesystem: 704 package: 755
warning: directory permissions differ on /usr/share/doc/p7zip/MANUAL/switches/
filesystem: 704 package: 755
(104/162) upgrading pacman-mirrorlist [######################] 100%
warning: /etc/pacman.d/mirrorlist installed as /etc/pacman.d/mirrorlist.pacnew
(105/162) upgrading patch [######################] 100%
(106/162) upgrading phpmyadmin [######################] 100%
(107/162) upgrading python2-cffi [######################] 100%
(108/162) upgrading python2-cryptography [######################] 100%
(109/162) upgrading ristretto [######################] 100%
(110/162) upgrading thunar [######################] 100%
(111/162) upgrading thunar-archive-plugin [######################] 100%
(112/162) upgrading thunar-media-tags-plugin [######################] 100%
(113/162) upgrading thunar-volman [######################] 100%
(114/162) upgrading unzip [######################] 100%
(115/162) upgrading upower [######################] 100%
(116/162) upgrading vlc [######################] 100%
(117/162) upgrading wget [######################] 100%
(118/162) upgrading xf86-video-intel [######################] 100%
(119/162) upgrading xfburn [######################] 100%
(120/162) upgrading xfce4-appfinder [######################] 100%
(121/162) upgrading xfce4-battery-plugin [######################] 100%
(122/162) upgrading xfce4-clipman-plugin [######################] 100%
(123/162) upgrading xfce4-cpufreq-plugin [######################] 100%
(124/162) upgrading xfce4-cpugraph-plugin [######################] 100%
(125/162) upgrading xfce4-datetime-plugin [######################] 100%
(126/162) upgrading xfce4-dict [######################] 100%
(127/162) upgrading xfce4-diskperf-plugin [######################] 100%
(128/162) upgrading xfce4-eyes-plugin [######################] 100%
(129/162) upgrading xfce4-fsguard-plugin [######################] 100%
(130/162) upgrading xfce4-genmon-plugin [######################] 100%
(131/162) upgrading xfce4-mailwatch-plugin [######################] 100%
(132/162) upgrading xfce4-mixer [######################] 100%
(133/162) upgrading xfce4-mount-plugin [######################] 100%
(134/162) upgrading xfce4-mpc-plugin [######################] 100%
(135/162) upgrading xfce4-netload-plugin [######################] 100%
(136/162) upgrading xfce4-notes-plugin [######################] 100%
(137/162) upgrading xfce4-notifyd [######################] 100%
(138/162) upgrading xfce4-power-manager [######################] 100%
(139/162) upgrading xfce4-quicklauncher-plugin [######################] 100%
(140/162) upgrading xfce4-screenshooter [######################] 100%
(141/162) upgrading xfce4-sensors-plugin [######################] 100%
(142/162) upgrading xorg-xinit [######################] 100%
(143/162) installing polkit-gnome [######################] 100%
(144/162) upgrading xfce4-session [######################] 100%
New optional dependencies for xfce4-session
slock: for locking screen with xflock4
(145/162) installing cantarell-fonts [######################] 100%
(146/162) installing gnome-themes-standard [######################] 100%
Optional dependencies for gnome-themes-standard
gtk-engines: HighContrast GTK2 theme [installed]
(147/162) upgrading xfce4-settings [######################] 100%
(148/162) upgrading xfce4-smartbookmark-plugin [######################] 100%
(149/162) upgrading xfce4-systemload-plugin [######################] 100%
(150/162) upgrading xfce4-terminal [######################] 100%
(151/162) upgrading xfce4-time-out-plugin [######################] 100%
(152/162) upgrading xfce4-timer-plugin [######################] 100%
(153/162) upgrading xfce4-verve-plugin [######################] 100%
(154/162) upgrading xfce4-wavelan-plugin [######################] 100%
(155/162) upgrading xfce4-weather-plugin [######################] 100%
(156/162) upgrading xfce4-xkb-plugin [######################] 100%
:: Keyboard layouts are now configured through xfce4-keyboard-settings
and managed by xfsettingsd. This plugin now only acts as a layout
indicator and manages per window/application layout preferences.
You will need to reconfigure the keyboard layouts on your next login.
(157/162) upgrading xfdesktop [######################] 100%
(158/162) upgrading xfwm4 [######################] 100%
(159/162) upgrading xorg-fonts-misc [######################] 100%
Updating font cache... done.
(160/162) upgrading xorg-server-common [######################] 100%
(161/162) upgrading xorg-server [######################] 100%
(162/162) upgrading xterm [######################] 100%
-- mod edit: converted img to url tags. Please see guidelines on image sizes. Trilby --
Last edited by jmancia (2015-03-27 17:15:03)Looks like Xfce. Do you have some sort of panel/dock at the bottom of the screen thats hidden?
If you are running Xfce and have the compositor enabled, try disabling "shadows under dock windows" in Settings Manager >> Window Manager Tweaks >> Compositor tab. -
I *think* I might have a lineless PB
Unfortunately I already made the decision to wait for an intel PB and therefore purchased upgrades to my current 1.33 12" over xmas. (New battery, ram & etc)
Story was, this is my 4th PB from amazon and they shipped it out late so I had a friend pick it up while I was away from my house. He said it had the lines so I decided to say *screw it* to the PBs and wait for the next iteration. Well my mistake, I decided to boot it up tonight and the screen surprisingly didn't show any lines at all.
I first thought it was a contrast issue because he might have messed around with it so I went into colorsync and reset it to color LCD.
Re-ran the crankycat image . . . . no wavyness in the top orange box, no banding in the darker orange box, no lines on the first corndog or display pic, banding that did not disappear on the 2nd set of pics. Rebooted and ran updates. Same thing . . . . no visible lines.
This PB is close to perfect. Fit and finish is superb, no keyboard or trackpad issues like my other ones had, superquiet seagate drive, screen appears to be line-less . . . . only issue is a DOA battery. Very hard to return it since I have been dealing with exchanging it and etc for 1.5 months. I am contacting my friend tomorrow to ask about these "lines" that he saw, but this is nothing like the three other ones I returned. If I had received this one to begin with, I would have definetely kept it.
Here's the info . . . another w8544 model . . . same as the other three that I got from amazon. A sticker on the box says 2005/10/27 . . . . other ones that I received had that same date or 10/28.
I am honestly really quite puzzled with this . . . . kinda disappointed too . . . . after purchasing the upgrades to my 12", it's not really worth it to sell it and keep the 15".
I do have a digicam, for those that may want me to snap up close pics of the screen. It is a canon SD450 which I recently acquired . . . . not sure how to get the detail of other up-close pics I've seen. If anyone has any pointers or etc, i'll gladly try to take the pics. The first few I tried just looked like nothing.
DaveHi Dave,
Happy new year and have fun with your perfect PB. I personally would keep it.
Pictures of your line less PB can really be useful for us, if you take the same kind of picture as the ones taken by Chloro and JFelbab. These pictures have been made using the blue acqua apple background (with swirling curve), using macro mode. The interesting pictures are the one showing the subpixels (red, green, blue). For examples see
http://discussions.apple.com/message.jspa?messageID=1422677#1422677
I guess you may have to set up your canon powershot that way :
use manual setting, remove flash, push the function set button
digital macro mode
spot
Fine
Large.
zoom at the maximum (X4), put your camera at the sufficiant distance to clearly see the VERTICAL banding, and shoot.
Then you would be get the squared nature of the pixel and in zooming the subpixel level.
I would be very interested to look at one of your pictures.
Luc -
Hey, I'm trying to install Adobe Flash on my Macbook Air. At a certain point it asks for my password but it doesn't take it. So I cannot continue installment. I have reset my password already. Still the same problem. How can I continue to install when it keeps asking for a password it doesn't recognize over and over again? How many times do I have to reset it then? Advice please
You have to provide your computer's administrator password in order to install Flash Player.
-
I get this message when I check the Device manager for my Ipod
Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)
How do I resolve this I have reinstalled iTunes but it still doesn't recognise my ipodI reinstalled Itunes a couple of times. I unistalled all programs that I never use, I updated all of my drivers, Windows swept my computer and found no problems. I have a yellow causion lite when I look at the USB-port with the phone connected. All other devices work without a problem.
-
Why i have to delete the Current word Text if i type wrong Previousword text in the sentence, my fingers are broad cannot accurately point thespecific character, I am forced to delete current word text, its really makingmy mind to get rid of iPhone4.
Hold your finger on the word for a little time - after a second or so, a magnifying view appears showing the few letters around your finger, with a cursor. Roll your finger to move the cursor to just in front of the letter you want to fix. Then let your finger go. You can now backspace to delete and replace the incorrect letter.
-
I guess I should not have messed with my file sharing pref...now I'm toast
I use my Airport to connect to my DSL.
I was "messing around" with my SHARING configuration (Apple...System Pref....Sharing...) and did something awful. I no longer have wireless connection to my Verizon router. I can hook up and get online (as I'm doing now) with Ethernet , but not Airport.
The Airport ICON is now GREY and has an ARROW (pointing UP) though it. Never seen that before.
And when I click on the icon I can't find my net work. The other Macs in the house work fine with airport.
Verizon tech support could not help.
How can get my Sharing preference back to normal (I was trying and guessing how to connect my other imacs around my home , without really knowing what I was doing. And I did something in there to screw this up).
Help please
JONSys Prefs Sharing should not have messed up your ability to connect wirelessly to your router.
Click on the on your menubar, click on "About This Mac" then click on "More Info..." Find "Airport Card" under "Network" and click on it. Does it say something like "No information found" or is your Airport card being recognized? If Airport is recognized as existing, I would next look in Sys Prefs Network, authenticate on the padlock in the lower lefthand corner, click on AIrport then click on Advanced, then check stuff in there, like on the Airport tab, is your home network listed there anymore? Try deleting it and readding it. Under TCP/IP, are you using DHCP (or whatever you use)? Or might it have gotten changed to a setting that is incompatible with your router's settings?
To get the Sharing Prefs "back to normal," just uncheck all of the checkboxes in Sharing and it will be back in its OEM state. -
TAKEOWN command -- SYSTEM user cannot claim ownership
Hello,
I already tried to ask this question over at microsoft answers, but I was forwarded here. ( https://answers.microsoft.com/en-us/windows/forum/windows8_1-security/takeown-system-user-cannot-claim-ownership/42499b15-6939-4c2b-811c-04449dd2a8b2 )
I've got a question about a matter of principle due to learning, not a particular problem.
When one want to take over ownership of files and directories owned by NT SERVICE\TrustedInstaller, one can very easily use the security tab of the properties. Also TAKEOWN and ICACLS works on an elevated cmd.
However, TAKEOWN does not work for particular situations when you are system user.
Here is my situation:
For learning purposes I want to add (full) permissions to "C:\Program Files\WindowsApps" to my user account with administrator privileges ("VankogSolid\Daniel").
To this folder only TrustedInstaller has full access. While System user has RWX to this sole folder and machine administrators have R-X rights for the whole folder. My own account has no explicit appearance:
(cannot post pictures, therefore do it yourself:)
http://fud.community.services.support.microsoft.com/Fud/FileDownloadHandler.ashx?fid=3abf52bb-8ef9-46aa-8dcc-07a26d778680
side question:
Even though my user has admin privileges it has no privileges at all for this folder. Accessing it is denied by the system.
Yes, my user is not listed in the permission entries, but shouldn't it be part of "Administrators" and therefore be able to read it?
OK, so to add my account to the permissions list I need to get ownership of the folder first and then set the permissions.
Doing this via GUI and on an elevated cmd via TAKEOWN with ICACLS works on my account.
But now the problem:
Why does TAKEOWN not work as SYSTEM user?
Here is what I mean:
Because I am curious and I think it might be of better security concern (debatable), I wanted to set the owner of the folder to SYSTEM and let SYSTEM set my account permissions.
So I opened a cmd as SYSTEM user while in the context of my windows logon screen and tried TAKEOWN:
c:\Windows\System32>whoami
nt authority\system
c:\Windows\System32>takeown /F "%Programfiles%\WindowsApps"
ERROR: The current logged on user does not have ownership privileges on
the file (or folder) "C:\Program Files\WindowsApps".
Main question:
OK, what's going on here? Why is he unable to claim ownership as SYSTEM? He has RWX, while even administrators only have R-X.
Thx for your explainings!Comments embedded
Hi ,
I’m facing problem with oracle user,
Oracle 10G R(2).Windows Xp
Application in .NET
1)I create user:Please post complete command
>
2)Then I check current session using this select”
"SELECT SID, SERIAL# FROM V$SESSION WHERE UserName =
Please post the complete command.
3)Then I execute this statement from application”
ALTER SYSTEM KILL SESSION '{sid},{serialno}'
IMMEDIATE”
Please post the complete command
4)In our scenario user is no more connected. How did you verify? Please post the complete command.
>
5) Now when we run below this statement from
application oracle gives an error”CANNOT DROP THE
USER THAT IS CURRENTLY CONNECTED” So the user is still connected.
Which user are you trying to drop? Yourself?
Again, please post the complete command.
>
DROP USER {0} CASCADE
Please advice.
Faheem LatifMy advice is you either provide sufficient detail, including all commands, and stop relying on crystal balls and fortunetellers.
No one here was looking over your shoulder, so no one can tell what happened, without you providing sufficient clues. I agree with you this is cumbersome, and doesn't comply with your custom to dump everything here, not doing any research yourself.
Sybrand Bakker
Senior Oracle DBA -
I created a pdf form and then imported it to Forms Central for distribute. It is now loaded to my website and setup so a person clicks on the link to open the form. At this point they then have to go to upper right to open form using a different view. I would like the form to open directly in Adobe Reader form to make it easier to enter information. Thanks, Ike
If you created it in Forms Central, you have to edit it there. I believe Forms Central is similar to LiveCycle Designer in that the form created is no longer able to be edited in Acrobat. I might be wrong, but that is my understanding. You add the submit button in Forms Central. Within Acrobat, you should be able to go to the forms menu and Manage Data to save the data to an Excel file. Others better with forms should be by to clarify things, but this should get you started. In the future you might find it better to post a forms question in the forms discussions.
-
Help! I'm very new to my iphone and i think i might have accidentally deleted my Facetime although my settings tell me I have it. How do i get it back on my phone? Thank you.
Built-in apps cannot be deleted. However, there never was a FaceTime icon on the iPhone. FaceTime is accessed by selecting a contact in the Contacts app, and then selecting FaceTime. The same can be done from the Contacts tab in the Phone app.
-
i have a macbook pro. i think i might have pushed some buttons that made my macbook look for a wireless keyboard.. i dont have any wireless keyboard. and now i cant use the keyboard on my macbook. how can i get the normal keyboard staring?
korgba wrote:
it pops up a script were it says that the macbook cannot find a bluetooth keyboard, and it isnt a keyboard connected
For some reason, your Mac doesn't recognise that a keyboard is present, so it looks for a wireless keyboard. The question is, why doesn't your Mac recognise that a keyboard is attached?
First, you need to make sure you remove all peripherals, especially USB peripherals (the keyboard is on the USB bus). Then restart holding down the Shift key. This should boot in Safe mode. If the computer boots normally (not in safe mode) and the keyboard is still not working, try resetting the SMC
Intel-based Macs: Resetting the System Management Controller (SMC)
<http://support.apple.com/kb/HT3964>
If that still doesn't fix the problem, then the keyboard (or its controller) is probably damaged and needs to be replaced. -
Can somebody please tell me what 'genius' included 'family' in reminders, and, made it so i cannot remove it. I have NO family, and, i find this particularly hurtful and disrespectful. Can somebody please help me remove it.
Hi EmmeElle,
Is it an iCloud reminder or a third party reminder like from an Exchange account(maybe your company provides this service together with mail etc..).
In the first case you should definitely be able to delete it by right click->delete or via https://www.icloud.com
In the second case there might be a browser based settings page from your company or the provider of the service (i.e. Exchange) itself. Otherwise you can go to your System Preferences -> Internet Accounts and deactivate reminders for this account. WARNING: this also deletes all other reminder lists and reminders from this service on your mac.
jl -
My audio problem is opposite to one of your bullet points. I have a new operating system, sound was
TO HP IN RESPONSE TO DOWNLOADING THE LATEST UPDATED AUDIO DRIVER:
My audio problem is opposite to one of your bullet points. I have a new operating system, sound was working fine, now on skype cannot be heard, iTunes will not load. All were fine before the change over. Over the past few days have gone through every type of troubleshooting offered online, my HP dv1000 came with the problem and I fixed it on the old os, just forget what I did. Recorder not working, etc.First off, try downloading the latest Safari. I believe it's 5.1.9. While you're there download the combo updater for Slow Leopard 10.6.8 to get your system up to the final release.
If your system generally runs well then it's unlikely that it will be necessary. In any case, it's usually a last resort.
A lot of odd problems can be remedied by repairing your permissions.
About Disk Utility's Repair Disk Permissions feature
Beyond that, some problems respond to a File System Check.
How to Repair a Mac Disk with fsck from Single User Mode
Although there's nothing wrong with Adobe Acrobat 7 (to the best of my knowledge) you should be aware that OS X may be using Preview instead unless you've specifically designated Acrobat as the default PDF app. I actually prefer it in most cases.
good luck -
My iphone 4s will not connect to networks. the button is greyed out and cannot turn on. I have reset the network settings and it still does not work - any ideas?
Thank you I tried the reset again did not fix- I think I am down to calling Apple and paying for a tech - phone company says it is a software problem. I just updated to 8.1.3 - I thought the update might fix it.
Maybe you are looking for
-
rendered images are not appearing on the webpage. works fine on IE. All plugins appear to be present including Adobe Flash
-
Hi All, I am using oracle 10g and running in sql*plus. I am getting one error when running explain plan for one query, if I am running the query in sql*plus then it is working fine. Query:- SELECT sp.store_cd wr_store_cd, l.store_cd, l.loc_cd, l.loc_
-
HI there I'm new to this whole spry thing heck I'm even new to posting; I'm trying to link to a spry tab from a flash button and well it's just not working I can use the sample as written http://labs.adobe.com/technologies/spry/samples/tabbedpanels/t
-
Hi all, I recently wrote my first VI for a soil consolidation test, which reads voltage measurements from an LVDT, keeps a moving average, and records the LVDT measurements versus time an XY graph. Everything is contained in a while loop with a stop
-
Hi all: I have an AVI clip off a Canon G7 Digital Camera. When I import into Premiere CS4, the info. says 640x480(1.0), 26+12, 30 fps. I matched the setting on the Sequence. However, when I export to Windows Media, Quick Time, etc., the speed