Cannot close period 3/1998 with MMPV

Hi all,
   I try to close period 3/1998 with mmpv . But i get an error "The specificed year 1998 is not the current carendar year".
   When i try with 3/2007 and execute. i got an error
Close Period for Material Master Records
L O G
Mode: Check and close period
Client: 000
Period entered (month/year): 03 2007
Incorrect period in control rec. of CoCd 0001; no conversion The current period (month/year) of the control record is 03
1998
Period closing complete; log issued.
E N D
What 'd i do?
BR,
Prachya

Hi All,
   I Had faced this Problem go to T.Code: OMSY There check CoCd : 0001 in which year & Month Till Closing period is there. As per your query it must be in 1998 03.
So Now Go to MMPV CoCd: 0001 (your Cocd)
Period : 04
Fiscal Year : 1998
It Gives a Warning Message as :
The specified year 1998 is not the current calendar year (Press Enter)
Period is closed for 04 1998 in this way you do for all months till you Get Calender year 2007.
I thing This Solve your Problem.
Regards,
Pherasath

Similar Messages

  • Reopened Period Closed with MMPV

    Hi, experts
    Is there a way to completely reverse the period closed with MMPV?
    Here is the scenario: the cost estimate is marked in period 7, after that the MMPV is done to open the period 8.
    Now, the standard cost estimate can't be released in period 8
    I have read the note 487381 regarding the re-opening the closed period for posting, but if ML is active, i don't think even MMPI is useful to reopen the period. Any suggestions?
    Thank you very much for your help
    BR, Erwin.

    Hello Erwin,
    Yes you can not reset period using transaction MMPI if material ledger is active. In that case you would need to deactivate material ledger ie. cancel production startup and proceed. However, only try this solution if this is a test or development system. You may refer to note 108374 for the same.
    However, if you are already in period 8 and you can post to prior period ie. 7 and you do not need to make any postings in period 6 then I would suggest you stick to period 8 until 31st Aug and then close period 8 in september.
    BR // SG

  • Can anyone advise how to close apps on iPad with new iOS? I have multiple open and cannot close them.

    Can anyone advise how to close apps with the new iOS?  I have multiple open and cannot close them

    Double-tap on the Home button. You will see a preview of the app above the actual icon. Slide the preview up to kill it.
    Please get the iPhone User Guide (For iOS 7 Software)Sep 19, 2013 - 23 MB.

  • I have an issue with my ipad2.  There is a dialogue box open regarding connecting to hotmail and I cannot close it.   Any ideas on what I can do?

    I have an issue with my ipad2.  There is a dialogue box open stating "Cannot verify server identity - Hotmail can't verify  the identity of "m.hotmail.com" - Would you like to continue anyway?"  I cannot close it close this box no matter what I press.  As a result I cant get in to my ipad.  Any ideas on what I can do?  I have tried switching it off but this doesn't work either.

    You need to force quit whatever is happening to you.  Try a reset, reboot.  Hold the home and sleep button until the apple logo appears.  Ignore the red slider.
    What may be happening is that the set up for your hot mail account is wrong or has failed, and if you have push or fetch turned on, one of the first things the pad will do is to establish contact, and check your mail.  If it cannot get through because of the set up, it comes to a stop, wanting you to fix that problem.
    If you have a wifi only, try to start up the pad where there is no signal.  And if your have 3 g, turn it off.  You want the pad to thing there is no signal, so dont try to look for the mail.  
    What happens if you push home from that screen?  It should goto the home page.  Then go immediately to settings, mail, and either fix the setting, or delete the account and start over.  But turn off push or fetch until you get it sorted out.

  • After a crash all open tabs disappeared - but in the background one website with audio is open. I cannot close it, because it appears as if no tabs are open.

    My browser froze & reopened with all tabs closed. I couldn't restore the tabs. Since then, when I open the browser, one tab I had with a video keeps playing - but I cannot see & therefore cannot close it.
    I have tried restarting my laptop & I deleted all history/cookies/..., but nothing helped yet.
    This is very annoy, please help!

    Please click the '''Helpful''' button next to the answer that solved your Firefox support issue, '''when you are logged in''', so this thread gets marked as '''Solved''' to help other users who may have this same problem.

  • I cannot close my iMAC Lion 10.7.5 because the screen with WElcome to Office:Mac2011 cannot be closed, what can I do?

    I cannot close my Computer because the sceen with "Welcome to Office:Mac2011"  cannot be closed.
    I went into System Preferences and there into Display to change the resolution, that did not work.
    I opened General in System Preferences and unmarked restore Windows when quitting and re-opening apps
    nothing seems to work.
    I would like to shut down the computer without having to unplug it every time, as soon as I plug it back in there is the"Welcomre to office:mac2011" back on my screen

    Hello wiggering,
    You could force the application to quit via Force Quit under the Apple menu.
    OS X: How to quit an unresponsive application using Force Quit
    http://support.apple.com/kb/HT3411
    Cheers,
    Allen

  • Cannot close first tab (LH end one) with other open ones are closeable.

    Cannot close first tab (LH end one) but others are closeable. Downloading indicator on tab continues to rotate indefinitely - windows under all tabs operate normally.
    Opening an additional Firefox copy allows all tabs to work normally within that copy

    I had this same problem for some time now. In another Mozilla Firefox forum page related to this search one user said to disable the add on "Invisible Hand". I did that and rebooted and have multiple pages open now with multiple tabs and I could shut down the first tab on all the open windows. I think the "Invisible Hand" add-on s the culprit, at least in my case.

  • After updating itunes three (3) days ago - itunes close shortly after starting with the message "a problem occured and cannot be solved, please close application"

    After updating itunes three (3) days ago - itunes close shortly after starting with the message "a problem occured and cannot be solved, please close application" - Platform: WIN7 - iTunes 11.2.9.115

    Start with the third box in  Troubleshooting issues with iTunes for Windows updates.
    If that doesn't work, use the steps in the second box to repair your iTunes installation. Your library should be unaffected by these steps but there is backup advice elsewhere in the user tip.
    tt2

  • After I got connected with quickbooks online, quickbooks is always open in the left third of my screen. I cannot close it separately from firefox. This does not happen in Internet Explorer. How can I make it go away?

    Everything was fine until I tried quickbooks online. Then, suddenly, I have the quickbooks site as an add-on no matter which other site I am visiting. I cannot close it unless I close the mozilla window completely.

    If the modem is also a router, either use the modem in bridge and run pppoe client on the TC.. that is assuming ADSL or similar eg vdsl. If it is cable service.. and the modem is a router, then bridge the TC.. go to internet page and select connect by ethernet and below that set connection sharing to bridge.
    Please tell us more about the modem if the above gives you issues.

  • Cannot close Production Order due to cost

    Hi experts,
    I have a problem with a production order that I cannot close. I have confirmed the order, however instead of cancelling the confirmation, I used MIGO inorder to reverse the goods movement. In closing the order, I encountered an error due to the balance cost for production (labor, power, water, overhead). I cannot cancel the confirmation since it is returning an error which is a deficit in the quantity. This is maybe due to the reversals I have already made for the finished good and components using MIGO. I cannot already repost or cancel the goods movement since the period is already closed.
    I really am hoping for your help regarding this so I may already close the order.
    Many many thanks.
    Sincerely,
    Ria

    Since periods are already closed in MM, it is not
    possible to post into these periods any more. There're two workarounds.
    1. If you can close the orders with the balance, change the indicator
       in the settlement profile from 'To be settled in full' to 'Can be
       settled' or 'Not for settlement' temporarily. After you close the
       orders, change it back immediately.
    2. Settle the order in KO88 twice with the following parameters:
       1) Settlement period    04
          Fiscal year          2009
          Posting period       06
       2) Settlement period    05
          Fiscal year          2005
          Posting period       06
    You can check whether there's cost for the order in table COEP.
    For more information, please review attached note 140672.
    I hope this will be useful,
    best regards
    Maria

  • Open / Close Period Logic

    Hi All,
    I have developed new form with open/close periods for a organization.
    For Ex:
    Say i Jun-09, i have some lines not transfered to GL table. due to some errors. If i try to close the month it will show me error.
    if there are no lines then only forms should allow user to close the month else not?
    I need this logic, if any has done before can you please share me.
    Thanks,
    Siva

    Hi All,
    this is code i'm using in form level and calling the procedure at item level 'WHEN-LIST-CHANGED trigger.
    Block level trigger:
    declare
         l_status varchar2(1000);
    begin
         jnpp_period_control(:global.x_org_id, :ctrl_blk.inv_org_id, :jnpp_inv_period_control.period_name,
         l_status);
         if l_status !='OK' then
         ok_alr(l_status);
         return;
         set_item_property('jnpp_inv_period_control.period_status', ENABLED, PROPERTY_FALSE);
    end if;
    end;
    Procedure code:
    create or replace procedure jnpp_period_control
    (pi_org_id in number, pi_inv_org_id in number,
    pi_period_name in varchar2, pio_status in out nocopy varchar2) is
    l_chk varchar2(30);
    errexc exception;
    begin
    if pi_inv_org_id is null then
    pio_status := 'Inventory organization cannot be null [jnpp_period_control]';
    raise errexc;
    end if;
    begin
    select 1
    into l_chk
    from jnpp_interorg_header jh, jnpp_interorg_lines jl
    where jl.trx_id = jh.trx_id
    and jh.org_id = pi_org_id
    and jh.inv_org_id = pi_inv_org_id
    and jh.status = 'Open'
    and to_char(jh.creation_date,'MON-YYYY') = to_char(pi_period_name)
    and rownum = 1;
    if l_chk > 0 then
    pio_status := 'Error : you cannot close the period as some InterOrg documents are lying. Please clear before closing...'||sqlerrm;
    raise errexc;
    end if;
    end;
    exception
    when errexc then
    null;
    when others then
    null;
    end;
    but if i select the statement i'm getting the values, but it is allowing me to changes the item list in the from. it should not allow me to change if the select statement have any records.
    please can any one help me
    Thnxs,
    Siva

  • Open Close Periods

    Hi,
       I have a requirement that access to the transaction for OPEN CLOSE PERIODS
       (S_ALR_87003642) needs to be provided only to the users who are authorized
       to open close periods for specific company codes. This transaction does not
       have a user interface and displays all the data for all the company codes
       irrespective to the authorization of the user for accessing the transaction for only
       specific company codes.
       I need to display data only for specific compnay codes based on the user
       authorization. Is it possible to achieve this functionally assuming that the user
       has authorization set up to access and modify data only for specific company
       codes and not to all.
    Thanks,
    Vamseedhar K

    Hi
    I think you can use authorization object S_TABU_LIN, please check with basis security guy.
    regards
    Srinivas

  • GL - Open/Close Periods

    After setting up Set of books (along with chart of accounts, calendar, and functional currency, etc.) I opened the first period as Dec 04, although my first financial year will be from January 05 to Dec 05. Then I tried opening next period (which should Jan 05) but the concurrent process failed.
    I thought it might be because there is no data in Dec 04 (i.e. current period). I then used journals to post account balances (for assets and liabilities + shareholders equity) to Jan 04. Then I closed the current period and tried to open next period again but the concurrent process failed!
    Please tell me what I need to do in non-technical language, so that next period can open. I am a functional user, not a technical consultant!
    No concurrent reports were produced but the View log is pasted below. Please note that I did define calendar periods before defining Set of Books and the periods are all in the LOV window for Open/Close!
    OOAP0010: Please define Calendar Periods before opening them.
    <x glopcs() 16-DEC-2005 08:08:52
    sqlcaid: sqlabc: 0 sqlcode: 1403 sqlerrml: 25
    sqlerrmc:
    ORA-01403: no data found
    sqlerrp:      sqlerrd: 0 0 0 0 0 538976288
    sqlwarn: sqltext:
    oracaid:      oracabc: 0
    oracchf: 0 oradbgf: 0 orahchf: 0 orastxtf: 0 orastxtl: 0
    orastxtc:
    orasfnmc: oraslnr: 0 orasfnml: 0
    orahoc: 0 ormoc: 0 oracoc: 0
    oranor: 0 oranpr: 0 oranex: 0
    SHRD0015: glopcs failed:
    SHRD0033: Error Status: 0
    SHRD0103: Function warning number: -1
    Message was edited by: Colin
    ColinA
    Message was edited by:
    ColinA

    Hi Everyone,
    I've been able to resolve this problem by myself. If you care to know, the problem was with calendar validation. I didn't check the concurrent validation report before assigning the calendar to my SOB. I have now checked it and corrected the error. I can now open and close periods. Let me know if you need more info.
    Colin

  • Reg:T-CODE for open and close period for materials(new plant).

    hi sap guru's
    T-code for following process
        can anybody send me , how to create calendar to new plant . and what is the T-code to be use for open and close period of materials for new plant.
    thanks
    sakthi..

    Hi Sakthi,
    I am assuming that you are asking about the factory calendars which are assigned while difing the plant.
    Factory calendars are created through transaction "SCAL".
    Opening and closing of MM periods can be done through transaction MMPV.This is based on the company code.Before using MMPV ,you can look the last opened period in the transaction MMRV.
    Reward points if it helps.
    Regards
    Karan

  • How to open and close period?

    Hi all,
    How can I open and close Period in MM module?
    thanks

    Hello,
    First of all read SAP Note 487381. T-code MMPI. If you don't have a backup or a request saved on development client with the previous period, you may try to modify the record on the table MARV (don't try yourself - discuss with a specialist who know your SAP system). If there isn't any records it won't be a problem!
    Good Luck!

Maybe you are looking for