Cannot communicate with system processes error

Hello,
It seems after S159 our IDS's started refusing any config updates/remote logins and returning "cannot communicate with system processes" shortly after login and then disconnecting the session. I see there are some patches available on TAC.
I can't tell if the IDS has any of these patches or not. It reports 4.1-4 Should the IDS report a version with a letter of the patch if it has any installed. Also, does this problem sound like the out of memory bug I have seen mentioned before? The memory usage on the sensors reports 98%
Any help is appreciated!

The only indication of a patched sensor is the status list of components, like Analysis Engine. Instead of "(Release)" it will have the patch version.
Yes, this could be the out of memory issue that can occur during a sigupdate.
NOTE: the memory usage portion of show version in 4.x is incorrect because it does not take into account the OS cached memory that is available for use. It may show that most of the memory is used when actually there is plenty available.

Similar Messages

  • IDSM Error: Cannot communicate with system processes.

    Dear all,
    We have 6500 Switch which include IDS module.We are facing some different problem while accessing IDS Module. We can able to ping module but when we try to telnet which logout session before we can get in IDSM prompt.Is any one facing same problem .
    IDSM Error: Cannot communicate with system processes.
    Is it related to memory utilization.How can i get access to IDSM?This is working configuration.Access list is also define properly.
    TIA
    Regards
    SAM

    Which software version are you using?
    check this bug-id: CSCef12198.
    Try these links:
    http://www.cisco.com/univercd/cc/td/doc/product/iaabu/csids/idsm/idsm_2/13074_04.htm#wp71383
    http://www.cisco.com/en/US/products/hw/modules/ps2706/prod_configuration_guide09186a00800f24fe.html

  • MG3250 Printer throws up error message - Scangear cannot communicate with scanner for these reasons

    Hi
    I have an MG 3250 printer running off an HP Pavilion Laptop using Windows 8.1. Every time I try to scan  I get an error message that 'cannot  communicate with scanner for these reasons...........etc'. The only way I can get the printer / scanner to work is by going through the Control Panel / Hardware & Printers route. This seems terribly slow and time consuming. What is wrong and what needs to be done to correct the problem?
    Thanks

    I have the exact same problem as you with my new Canon LiDE 120. The errors I get are: 2, 156, 182, 55 and sometimes 77 when using it on my Windows 8.1 (64 Bit) desktop PC. I have tried installing and uninstalling the drivers multiple times, used different ports and still nothing. It does however work properly on a Windows 7 device.
    My PC's specification is as follows:
    Windows 8.1 (64 Bit) - With latest updates
    Avast Premier
    Malwarebytes
    ASUS z87 Pro
    Intel 4770k
    ASUS GTX 670 (4GB)
    8GB 1600MHz Kingston RAM
    Things I have done
    Tried different ports (USB 2.0 and 3.0)
    Installed all software & driver from CD
    Installed all software & driver from Canon Website
    Installed only the latest driver from Canon Website (April 2015)
    Tried to use Windows Fax & Scan, Scan, IJ Scan Utility, Scangear and Vuescan.
    What happens
    The physical buttons on the device are unresponsive
    The computer says it is warming up, but nothing happens
    It starts to scan for a few seconds and then comes to an abrupt end - this can happen at 10% of the scan or even at 91%.
    Surely the problem cannot be with Windows 8.1 since the device was only released last year. What could be the issue? I called their support line and was advised to clear the drivers of previous scanners used by my system, I did this and there still is no change. Could somebody please help me! 

  • Error: Cannot communicate with mainApp (getVersion)

                       Dear All,
    I have error when login to IPS with the follwoing error:
    Error: Cannot communicate with mainApp (getVersion). Please contact your system administrator.
    Would you like to run cidDump?[no]:
    My IPS detail:
    Model: ASA-SSM-20
    Sw Version: 7.1(6)E4
    Rgrds
    Sariah

    i guess u need to reinstall the os of the ips i had the same problem ,... best of luck
                                                                                                         regards
                                                                                                         Shoaib ali

  • Webutil error "unable to communicate with runtime process."

    Hi,
    Yesterday I configured webutil with Developer 10g (9.0.4).
    I used webutil_106.zip and jacob_18.zip.
    I succesfully deploy a form that display the selection file dialog with the function:
    CLIENT_GET_FILE_NAME
    Today I tried to test again the form, and I got an error when the form is opening, I review the log and I find "unable to communicate with runtime process.".....
    I didn't change any configuration... what I'm doing wrong..... It just work great yesterday!!!!
    I tried signing again the jacob.jar and frmwebutil.jar files..... However I still have the error.......
    Any help is welcome....
    The error in the log:
    09/03/25 10:57:45 Started
    09/03/25 10:57:55 forms90web: jsp: init
    09/03/25 10:57:55 forms90web: f90servlet: init
    09/03/25 10:57:55 forms90web: FormsServlet init():
    configFileName: c:\dev10g/forms90/server/formsweb.cfg
    testMode: false
    09/03/25 10:57:55 forms90web: 9.0.4.0.0 Started
    09/03/25 10:57:56 forms90web: l90servlet: init
    09/03/25 10:57:56 forms90web: ListenerServlet init()
    09/03/25 10:58:02 forms90web: Forms session <1> aborted: unable to communicate with runtime process.
    09/03/25 10:58:02 forms90web: Forms session <1> exception stack trace:
    java.io.IOException: FRM-93000: Unexpected internal error.
    Details : No HTTP headers received from runform
         at oracle.forms.servlet.ListenerServlet.forwardResponseFromRunform(Unknown Source)
         at oracle.forms.servlet.ListenerServlet.doPost(Unknown Source)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:765)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
         at java.lang.Thread.run(Thread.java:534)
    09/03/25 11:00:58 forms90web: l90servlet: destroy
    09/03/25 11:00:58 forms90web: 9.0.4.0.0 Stopped
    09/03/25 11:00:58 Stopped (Shutdown executed by jazn.com/admin from 127.0.0.1 (localhost))
    Edited by: Santiago on 25/03/2009 11:23 AM

    I Find the way, It's OK now.
    When I use the webutil.olb in a form. I chose "Subclass", It's necessary to choose "Copy".

  • I am getting the error message "cannot communicate with the server" when i try to sign into my apple account on my ipad - any ideas???

    i am getting the error message "cannot communicate with the server" when i try to sign into my apple account on my ipad - any ideas???

    Welcome to the Apple Community.
    The following article(s) may help you.
    Photo Stream ToU's

  • Canoscan 88ooF error report, "Cannot communicate with scanner."

    When I try and use my scanner I get the error report,"Cannot communicate with scanner, check that it is plugged in and truned on." When I go to Windows device manager I can see it and when I click on the properties buttonn it says that the device is working properly. I have downloaded the latest driver software etc., and I have uninstalled everything and re installed again but I still get the same error report.
    I am using Windows 7, 64 bit version.
    Above is the error message I get.
    Solved!
    Go to Solution.

    After two days of fruitless effort I have found my own solution. I have downloaded and installed VueScan  x64 and it works a treat. I think the problem I have been having is due to the fact that the scanner driver is 64 bit and the programs that install are 32 bit and although scanner driver is working perfectly well the 2 bit probrams can't see it.

  • Error starting db via batch script: Cannot communicate with crsd

    Hi,
    I've installed Oracle 11g on a Windows 7 64 bit laptop, and I have no problems starting the database using Windows Services
    I tried starting the db using the batch command, but received the following error:
    C:\Users\Scott>C:\app\Scott\oracle\11.2.0\11gr2_home\BIN\srvctl.bat start database -d sw11g
    PRCD-1027 : Failed to retrieve database sw11g
    PRCR-1070 : Failed to check if resource ora.sw11g.db is registered
    Cannot communicate with crsd
    Have I missed a parameter?
    Cheers

    No, this is my laptop where I'm using the DB as an experimental tool etc.
    This was my attempt in placing a shortcut on my desktop for startup.

  • Jabber is unable to register through expressway (Error:Cannot communicate with the server)

    Hello Experts !
                         I am getting below error while trying to login in jabber through expressway . Please help me to fix this issue
    Attached is the file .
    (Error:Cannot communicate with the server)
    Regards;
    KV

    Ok, let's clarify, what u have (correct me, where I am wrong):
    1. We assume,that outside server's config is okay (there are only collab_edge srv for outside domain);
    2. Traversal Zone is up (everything is okay with certs, IM&P nodes,CM are added);
    3. Both domains (inside/outisde) are created on E/C and properly configured;
    4.Inside DNS server has has srv records (cuplogin,cisco-uds) for both domains:outside,inside;
    If yes, then you need to reset jabber, make "ipconfig /flashdns" on client, flash dns on E/C.
    Start logging with packet captures and tries to login. After that, start checking from packet captures: client, E/C. Try to search for DNS lookups, if evry node tries to find appropriate server (client->E, C->IM&P) .
    Regards,
    Kirill

  • M1319F Scan error message " cannot communicate with the scanner"

    I have a HP M1319F which was able to print/scan/fax.  Recently the fax function has ceased. I have ordered a fax board which will hopefully resolve that problem.  Now it does not scan as well. I get the error message " cannot communicate with the scanner" . unistalled and resinstalled the software but to now avail

    I have a HP M1319F which was able to print/scan/fax.  Recently the fax function has ceased. I have ordered a fax board which will hopefully resolve that problem.  Now it does not scan as well. I get the error message " cannot communicate with the scanner" . unistalled and resinstalled the software but to now avail

  • Cannot communicate with scanner. Cable may be disconnected or scanner may be turned off...I

    I have a MF6590 mutifunction printer.  It had been working fine until last week when I got the error message "Cannot communicate with scanner.." I tried uninstall and reinstall te driver, I tried switching to a different USB port, reboot my PC, turned on/off the printer.. hopped on one foot...nothing worked.  Anyone has any suggestion?

    Hi bmaskell.
    I will be glad to assist you.
    Since the issue began after updating the Windows 7 operating system, I recommend that you uninstall and reinstall the Canon drivers.  Please follow the instructions below:
    1.  Unplug the USB cable from the printer.
    ***Please leave the USB cable disconnected until you have uninstalled and completely reinstalled the drivers.  Connecting the printer before going through the "Setup Wizard" may cause the Windows operating system to install a generic driver for the printer.***
     2.  Select [Start] and [All Programs].
     3.  Select the [Canon] folder.
     4.  Select [MF4100 Series] and then uninstall.  Repeat the steps for the [MF Toolbox].
    5.  Restart you computer.
    Leaving the USB cable disconnected, please download the driver from the Canon website using the following link: http://www.usa.canon.com/cusa/support/consumer
    1. The site will automatically detect your operating system. 
    2.  Next, select [Drivers] and the file [Windows 64bit] imageCLASS MF4150 MFDrivers (UFR II / FAX / ScanGear).
    3.  Click "I Agree - Begin Download".
    4.  Save the file to your computer.  Once the download is complete, click "Run".
    5.  Click "I Decline - Go Back" on the Canon site and select [Software] and the file [Windows 32bit & 64bit] Tool Box Ver.4.9.1.1.mf16.
    6.  Save the file to your computer.  Once the download is complete, click "Run".
    7.  Close the Canon window and go to the location on the computer where the files are saved, usually [Downloads].
    8.  You will see two icons with the name MF4150_MFDrivers_W64_us_EN_2.exe.  Double click on the yellow folder icon.  In the folder you will see two files with the name "Setup".  Double click on the "Setup" that has the type [Application].
    9.  The "MF Drivers Setup Wizard" will open.  Please proceed through the setup and restart the computer.
    10.  After the computer restarts, please connect the USB cable to the computer and allow the computer to finish the installation process.  Once the printer is listed in [Devices and Printers], right-click on the icon and select it as the default printer.  Please open a document on the computer and print it out.
    Please follow steps 7 and 8 to install the Canon MF Toolbox 4.9 software.  Once the software is installed, please follow the steps below to complete a scan:
    1.  Press the [SCAN] button on the control panel of the printer and place a document in the feeder.
    2.  On the computer, open the MF Toolbox program.
    3.  Select the [PDF] scan function.
    4.  Click the green [Start] button in the PDF window.  The scan should begin.
    I hope this information is helpful to you.  Should you need further assistance, please contact us at 1-800-OK-CANON (1-800-652-2666).
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • LDOM Issue on T2000   ldmd cannot communicate with the hypervisor as the re

    Hi,
    There were some issues with old primary LDOM at T2000 so I installed
    new o/s 64 bit on SUN SPARC T2000 and reset SC on factor-default and
    also installed LDOM 1.2 version. Seems like old hypervisor is not
    deleted.
    Now I am getting error.
    #ldm list
    Failed to connect to logical domain manager: Connection refused
    So far I have trying the following steps. but still no luck
    I installed version 1.2 LDOM. and also I updated SC. Plus I installed
    below patches:
    •118833-36, Kernel update patch
    •124921-02, which contains updates to the Logical Domains 1.0 drivers
    and utilities
    •125043-01, which contains updates to the qcn (console) drivers.
    SC> bootmode config="factory-default"
    SC> poweroff
    SC> resetsc -y
    SC> poweron
    Now I tried everything but still no luck
    Here are some errot which I am getting
    #Svcs -xv
    [ Oct  5 00:07:14 Method "start" exited with status 96 ]
    [ Oct  5 00:32:11 Leaving maintenance because disable requested. ]
    [ Oct  5 00:32:11 Disabled. ]
    [ Oct  5 00:32:21 Enabled. ]
    [ Oct  5 00:32:21 Executing start method ("/opt/SUNWldm/bin/ldmd_start") ]
    Service LOG file Info:
    ldmd cannot communicate with the hypervisor as the required device
    does not exist:
    /devices/virtual-devices@100/channel-devices@200/virtual-channel@0:hvctl
    Either this is not the control domain or the firmware does not support LDoms
    [ Oct  5 00:32:21 Method "start" exited with status 96 ]
    [ Oct  5 00:43:54 Leaving maintenance because disable requested. ]
    [ Oct  5 00:43:54 Disabled. ]
    [ Oct  5 00:45:19 Enabled. ]
    [ Oct  5 00:45:19 Executing start method ("/opt/SUNWldm/bin/ldmd_start") ]
    ldmd cannot communicate with the hypervisor as the required device
    does not exist:
    /devices/virtual-devices@100/channel-devices@200/virtual-channel@0:hvctl
    Either this is not the control domain or the firmware does not support LDoms
    [ Oct  5 00:45:19 Method "start" exited with status 96 ]
    [ Oct  5 00:45:19 Rereading configuration. ]
    bash-3.00# cd /opt/SUNWldm/bin/
    bash-3.00# ls
    ldm ldmconfig ldmd ldmd_start schemas
    bash-3.00# ./ldmd_start
    ldmd cannot communicate with the hypervisor as the required device
    does not exist:
    /devices/virtual-devices@100/channel-devices@200/virtual-channel@0:hvctl
    Either this is not the control domain or the firmware does not support LDoms
    bash-3.00# ldm
    Failed to connect to logical domain manager: Connection refused
    bash-3.00# sc>
    sc> showhost
    Sun-Fire-T2000 System Firmware 6.7.12 2011/07/06 20:03
    Host flash versions:
    OBP 4.30.4.d 2011/07/06 14:29
    Hypervisor 1.7.3.c 2010/07/09 15:14
    POST 4.30.4.b 2010/07/09 14:24
    bash-3.00#
    bash-3.00# uname -a
    SunOS ldom-srv 5.10 Generic_118833-36 sun4v sparc SUNW,Sun-Fire-T200
    Thanks in advance

    Hi,
    There were some issues with old primary LDOM at T2000 so I installed
    new o/s 64 bit on SUN SPARC T2000 and reset SC on factor-default and
    also installed LDOM 1.2 version. Seems like old hypervisor is not
    deleted.
    Now I am getting error.
    #ldm list
    Failed to connect to logical domain manager: Connection refused
    So far I have trying the following steps. but still no luck
    I installed version 1.2 LDOM. and also I updated SC. Plus I installed
    below patches:
    •118833-36, Kernel update patch
    •124921-02, which contains updates to the Logical Domains 1.0 drivers
    and utilities
    •125043-01, which contains updates to the qcn (console) drivers.
    SC> bootmode config="factory-default"
    SC> poweroff
    SC> resetsc -y
    SC> poweron
    Now I tried everything but still no luck
    Here are some errot which I am getting
    #Svcs -xv
    [ Oct  5 00:07:14 Method "start" exited with status 96 ]
    [ Oct  5 00:32:11 Leaving maintenance because disable requested. ]
    [ Oct  5 00:32:11 Disabled. ]
    [ Oct  5 00:32:21 Enabled. ]
    [ Oct  5 00:32:21 Executing start method ("/opt/SUNWldm/bin/ldmd_start") ]
    Service LOG file Info:
    ldmd cannot communicate with the hypervisor as the required device
    does not exist:
    /devices/virtual-devices@100/channel-devices@200/virtual-channel@0:hvctl
    Either this is not the control domain or the firmware does not support LDoms
    [ Oct  5 00:32:21 Method "start" exited with status 96 ]
    [ Oct  5 00:43:54 Leaving maintenance because disable requested. ]
    [ Oct  5 00:43:54 Disabled. ]
    [ Oct  5 00:45:19 Enabled. ]
    [ Oct  5 00:45:19 Executing start method ("/opt/SUNWldm/bin/ldmd_start") ]
    ldmd cannot communicate with the hypervisor as the required device
    does not exist:
    /devices/virtual-devices@100/channel-devices@200/virtual-channel@0:hvctl
    Either this is not the control domain or the firmware does not support LDoms
    [ Oct  5 00:45:19 Method "start" exited with status 96 ]
    [ Oct  5 00:45:19 Rereading configuration. ]
    bash-3.00# cd /opt/SUNWldm/bin/
    bash-3.00# ls
    ldm ldmconfig ldmd ldmd_start schemas
    bash-3.00# ./ldmd_start
    ldmd cannot communicate with the hypervisor as the required device
    does not exist:
    /devices/virtual-devices@100/channel-devices@200/virtual-channel@0:hvctl
    Either this is not the control domain or the firmware does not support LDoms
    bash-3.00# ldm
    Failed to connect to logical domain manager: Connection refused
    bash-3.00# sc>
    sc> showhost
    Sun-Fire-T2000 System Firmware 6.7.12 2011/07/06 20:03
    Host flash versions:
    OBP 4.30.4.d 2011/07/06 14:29
    Hypervisor 1.7.3.c 2010/07/09 15:14
    POST 4.30.4.b 2010/07/09 14:24
    bash-3.00#
    bash-3.00# uname -a
    SunOS ldom-srv 5.10 Generic_118833-36 sun4v sparc SUNW,Sun-Fire-T200
    Thanks in advance

  • VIPCA and CRS-0184: Cannot communicate with CRS daemon

    I have some strange issue during Clusterware installation. I've installed software on 2 nodes, and have ran root.sh on both. On second node I've had problem with interfaces but it came through after using oifcfg for both public and private interface. Silent vipca executed by root.sh failed, but as it is said in docs it's ok. I need to run vipca on second node manually. But when I'm running it I'm receiving CRS-0184 Cannot communicate with CRS daemon. Daemons are running, there's no error running crs_start -all. I don't have any idea what can I do now.
    Clusterware 10.2.0.1
    SUSE Linux Enterprise Server 10 SP2

    10/26/2008 17:56:08
    ./ocrdump.bin
    [SYSTEM]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.css]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.css.interfaces]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_CREATE_SUB_KEY, OTHER_PERMISSION : PROCR_READ, USER_NAME : oracle, GROUP_NAME : oinstall}
    [SYSTEM.css.interfaces.global]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_ALL_ACCESS, OTHER_PERMISSION : PROCR_READ, USER_NAME : oracle, GROUP_NAME : oinstall}
    [SYSTEM.css.interfaces.global.eth0]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_ALL_ACCESS, OTHER_PERMISSION : PROCR_READ, USER_NAME : oracle, GROUP_NAME : oinstall}
    [SYSTEM.css.interfaces.global.eth0.172|d16|d216|d0]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_ALL_ACCESS, OTHER_PERMISSION : PROCR_READ, USER_NAME : oracle, GROUP_NAME : oinstall}
    [SYSTEM.css.interfaces.global.eth0.172|d16|d216|d0.1]
    ORATEXT : public
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_ALL_ACCESS, OTHER_PERMISSION : PROCR_READ, USER_NAME : oracle, GROUP_NAME : oinstall}
    [SYSTEM.css.interfaces.global.eth0.172|d216|d16|d0]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_ALL_ACCESS, OTHER_PERMISSION : PROCR_READ, USER_NAME : oracle, GROUP_NAME : oinstall}
    [SYSTEM.css.interfaces.global.eth0.172|d216|d16|d0.1]
    ORATEXT : public
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_ALL_ACCESS, OTHER_PERMISSION : PROCR_READ, USER_NAME : oracle, GROUP_NAME : oinstall}
    [SYSTEM.css.interfaces.global.eth1]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_ALL_ACCESS, OTHER_PERMISSION : PROCR_READ, USER_NAME : oracle, GROUP_NAME : oinstall}
    [SYSTEM.css.interfaces.global.eth1.192|d168|d0|d0]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_ALL_ACCESS, OTHER_PERMISSION : PROCR_READ, USER_NAME : oracle, GROUP_NAME : oinstall}
    [SYSTEM.css.interfaces.global.eth1.192|d168|d0|d0.1]
    ORATEXT : cluster_interconnect
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_ALL_ACCESS, OTHER_PERMISSION : PROCR_READ, USER_NAME : oracle, GROUP_NAME : oinstall}
    [SYSTEM.css.clustername]
    ORATEXT : crs
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.css.misscount]
    UB4 (10) : 60
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.css.diskfile]
    ORATEXT : /dev/raw/raw2
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.css.configured_node_map]
    BYTESTREAM (16) : 6
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.css.node_names]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.css.node_names.slesorange]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.css.node_names.slesorange.nodenum]
    UB4 (10) : 1
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.css.node_names.slesred]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.css.node_names.slesred.nodenum]
    UB4 (10) : 2
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.css.node_numbers]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.css.node_numbers.node1]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.css.node_numbers.node1.nodename]
    ORATEXT : slesorange
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.css.node_numbers.node1.privatename]
    ORATEXT : slesorange-priv
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.css.node_numbers.node1.hostname]
    ORATEXT : slesorange
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.css.node_numbers.node1.nsendpoint]
    ORATEXT : (ADDRESS=(PROTOCOL=tcp)(HOST=slesorange-priv)(PORT=49895))
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.css.node_numbers.node2]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.css.node_numbers.node2.nodename]
    ORATEXT : slesred
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.css.node_numbers.node2.privatename]
    ORATEXT : slesred-priv
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.css.node_numbers.node2.hostname]
    ORATEXT : slesred
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.css.node_numbers.node2.nsendpoint]
    ORATEXT : (ADDRESS=(PROTOCOL=tcp)(HOST=slesred-priv)(PORT=49895))
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.css.privatenames]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.css.privatenames.slesorange-priv]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.css.privatenames.slesorange-priv.nodenum]
    UB4 (10) : 1
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.css.privatenames.slesred-priv]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.css.privatenames.slesred-priv.nodenum]
    UB4 (10) : 2
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.css.hostnames]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.css.hostnames.slesorange]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.css.hostnames.slesorange.nodenum]
    UB4 (10) : 1
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.css.hostnames.slesred]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.css.hostnames.slesred.nodenum]
    UB4 (10) : 2
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.language]
    ORATEXT : AMERICAN_AMERICA.WE8ISO8859P1
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.version]
    UB4 (10) : 3
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.version.node_numbers]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.version.node_numbers.node1]
    ORATEXT : 10.2.0.1.0
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.version.node_numbers.node2]
    ORATEXT : 10.2.0.1.0
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.version.activeversion]
    ORATEXT : 10.2.0.1.0
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.versionstring]
    ORATEXT : 10G Release 2
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.ORA_CRS_HOME]
    ORATEXT : /u01/oracle/product/10.2.0/crs
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.local_only]
    ORATEXT : false
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.evm]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.evm.cevmkey]
    ORATEXT : 17536746
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.evm.rmport]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.evm.rmport.localhost]
    ORATEXT : (ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=49897))
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.evm.rmport.slesorange]
    ORATEXT : (ADDRESS=(PROTOCOL=tcp)(HOST=slesorange-priv)(PORT=49897))
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.evm.rmport.slesred]
    ORATEXT : (ADDRESS=(PROTOCOL=tcp)(HOST=slesred-priv)(PORT=49897))
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.evm.cevmport]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.evm.cevmport.slesorange]
    ORATEXT : (ADDRESS=(PROTOCOL=tcp)(HOST=slesorange-priv)(PORT=49898))
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.evm.cevmport.slesred]
    ORATEXT : (ADDRESS=(PROTOCOL=tcp)(HOST=slesred-priv)(PORT=49898))
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.evm.acceptor]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.evm.acceptor.slesorange]
    ORATEXT : (ADDRESS=(PROTOCOL=ipc)(KEY=Aslesorange_crs_evm))
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.evm.acceptor.slesred]
    ORATEXT : (ADDRESS=(PROTOCOL=ipc)(KEY=Aslesred_crs_evm))
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.evm.cevmipc]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.evm.cevmipc.slesorange]
    ORATEXT : (ADDRESS=(PROTOCOL=ipc)(KEY=Cslesorange_crs_evm))
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.evm.cevmipc.slesred]
    ORATEXT : (ADDRESS=(PROTOCOL=ipc)(KEY=Cslesred_crs_evm))
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.crs]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.crs.usersecurity]
    ORATEXT : 1
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.crs.deny]
    ORATEXT :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.crs.user_default_dir]
    ORATEXT : /u01/oracle/product/10.2.0/crs/crs/public
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.crs.e2eport]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.crs.e2eport.slesorange]
    ORATEXT : (ADDRESS=(PROTOCOL=tcp)(HOST=slesorange-priv)(PORT=49896))
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.crs.e2eport.slesred]
    ORATEXT : (ADDRESS=(PROTOCOL=tcp)(HOST=slesred-priv)(PORT=49896))
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.crs.uiport]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.crs.uiport.slesorange]
    ORATEXT : (ADDRESS=(PROTOCOL=ipc)(KEY=CRSD_UI_SOCKET))
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.crs.uiport.slesred]
    ORATEXT : (ADDRESS=(PROTOCOL=ipc)(KEY=CRSD_UI_SOCKET))
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.OCR]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.OCR.BACKUP]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.OCR.BACKUP.0]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.OCR.BACKUP.0.NODENAME]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.OCR.BACKUP.0.TIMESTAMP]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.OCR.BACKUP.0.LOC]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.OCR.BACKUP.1]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.OCR.BACKUP.1.NODENAME]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.OCR.BACKUP.1.TIMESTAMP]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.OCR.BACKUP.1.LOC]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.OCR.BACKUP.2]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.OCR.BACKUP.2.NODENAME]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.OCR.BACKUP.2.TIMESTAMP]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.OCR.BACKUP.2.LOC]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.OCR.BACKUP.DAY]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.OCR.BACKUP.DAY.NODENAME]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.OCR.BACKUP.DAY.TIMESTAMP]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.OCR.BACKUP.DAY.LOC]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.OCR.BACKUP.DAY_]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.OCR.BACKUP.DAY_.NODENAME]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.OCR.BACKUP.DAY_.TIMESTAMP]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.OCR.BACKUP.DAY_.LOC]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.OCR.BACKUP.WEEK]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.OCR.BACKUP.WEEK.NODENAME]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.OCR.BACKUP.WEEK.TIMESTAMP]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.OCR.BACKUP.WEEK.LOC]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.OCR.BACKUP.WEEK_]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.OCR.BACKUP.WEEK_.NODENAME]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.OCR.BACKUP.WEEK_.TIMESTAMP]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [SYSTEM.OCR.BACKUP.WEEK_.LOC]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [DATABASE]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_CREATE_SUB_KEY, OTHER_PERMISSION : PROCR_CREATE_SUB_KEY, USER_NAME : root, GROUP_NAME : root}
    [DATABASE.NODEAPPS]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_CREATE_SUB_KEY, GROUP_PERMISSION : PROCR_CREATE_SUB_KEY, OTHER_PERMISSION : PROCR_CREATE_SUB_KEY, USER_NAME : oracle, GROUP_NAME : oinstall}
    [DATABASE.VIP_RANGE]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_CREATE_SUB_KEY, GROUP_PERMISSION : PROCR_CREATE_SUB_KEY, OTHER_PERMISSION : PROCR_CREATE_SUB_KEY, USER_NAME : oracle, GROUP_NAME : oinstall}
    [DATABASE.LOG]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_ALL_ACCESS, OTHER_PERMISSION : PROCR_ALL_ACCESS, USER_NAME : oracle, GROUP_NAME : oinstall}
    [DATABASE.ASM]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_CREATE_SUB_KEY, GROUP_PERMISSION : PROCR_CREATE_SUB_KEY, OTHER_PERMISSION : PROCR_READ, USER_NAME : oracle, GROUP_NAME : oinstall}
    [DATABASE.DATABASES]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_CREATE_SUB_KEY, GROUP_PERMISSION : PROCR_CREATE_SUB_KEY, OTHER_PERMISSION : PROCR_CREATE_SUB_KEY, USER_NAME : oracle, GROUP_NAME : oinstall}
    [DATABASE.ONS_HOSTS]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : oracle, GROUP_NAME : oinstall}
    [DATABASE.ONS_HOSTS.slesorange]
    ORATEXT : slesorange
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : oracle, GROUP_NAME : oinstall}
    [DATABASE.ONS_HOSTS.slesorange.PORT]
    ORATEXT : 6200
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : oracle, GROUP_NAME : oinstall}
    [DATABASE.ONS_HOSTS.slesred]
    ORATEXT : slesred
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : oracle, GROUP_NAME : oinstall}
    [DATABASE.ONS_HOSTS.slesred.PORT]
    ORATEXT : 6200
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : oracle, GROUP_NAME : oinstall}
    [CRS]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}

  • CRS-4535: Cannot communicate with Cluster Ready Services

    [oracle@bnl11237dat01 ~]$ /u01/app/11.2.0/grid/bin/cluvfy stage -post crsinst -n bnl11237dat01,bnl11237dat02 -verbose
    Performing post-checks for cluster services setup
    Checking node reachability...
    Check: Node reachability from node "bnl11237dat01"
    Destination Node Reachable?
    bnl11237dat01 yes
    bnl11237dat02 yes
    Result: Node reachability check passed from node "bnl11237dat01"
    Checking user equivalence...
    Check: User equivalence for user "oracle"
    Node Name Comment
    bnl11237dat02 passed
    bnl11237dat01 passed
    Result: User equivalence check passed for user "oracle"
    ERROR:
    Unable to obtain network interface list from Oracle Clusterware (OIFCFG)
    Verification cannot proceed
    Post-check for cluster services setup was unsuccessful on all the nodes.
    [oracle@bnl11237dat01 ~]$ oifcfg iflist
    bond1 10.32.25.160
    bond2 10.32.17.200
    bond2 169.254.0.0
    bond0.1515 10.32.24.0
    bond0.1536 172.16.7.0
    [oracle@bnl11237dat01 ~]$ oifcfg iflist -p
    bond1 10.32.25.160 PRIVATE
    bond2 10.32.17.200 PRIVATE
    bond2 169.254.0.0 UNKNOWN
    bond0.1515 10.32.24.0 PRIVATE
    bond0.1536 172.16.7.0 PRIVATE
    [oracle@bnl11237dat01 ~]$ oifcfg iflist -p -n
    bond1 10.32.25.160 PRIVATE 255.255.255.240
    bond2 10.32.17.200 PRIVATE 255.255.255.248
    bond2 169.254.0.0 UNKNOWN 255.255.0.0
    bond0.1515 10.32.24.0 PRIVATE 255.255.255.192
    bond0.1536 172.16.7.0 PRIVATE 255.255.255.0
    [oracle@bnl11237dat01 ~]$ /u01/app/11.2.0/grid/bin/onsctl debug
    HTTP/1.1 200 OK
    Content-Length: 1923
    Content-Type: text/html
    Response:
    == bnl11237dat01:6200 8732 11/05/19 11:44:09 ==
    Home: /u01/app/11.2.0/grid
    ======== ONS ========
    IP ADDRESS PORT TIME SEQUENCE FLAGS
    127.0.0.1 6200 4dd4f2a3 00000000 00000008
    Listener:
    TYPE BIND ADDRESS PORT SOCKET
    Local 127.0.0.1 6100 5
    Remote any 6200 7
    Remote any 6200 -
    Connection Topology: (1)
    IP PORT VERS TIME
    127.0.0.1 6200 4 4dd4f2a3=
    Client connections:
    ID CONNECTION ADDRESS PORT FLAGS SENDQ REF SUB W
    0 internal 0 01008a 00000 001 002
    2 127.0.0.1 6100 01001a 00000 001 001
    1 127.0.0.1 6100 01001a 00000 001 001
    3 127.0.0.1 6100 01001a 00000 001 001
    4 127.0.0.1 6100 01001a 00000 001 001
    7 127.0.0.1 6100 01001a 00000 001 000
    request 127.0.0.1 6100 03201a 00000 001 000
    Worker Ticket: 10/10, Last: 11/05/19 11:42:21
    THREAD FLAGS
    40460940 00000012
    405b4940 00000012
    41280940 00000012
    Resources:
    Notifications:
    Received: Total 0 (Internal 0), in Receive Q: 0
    Processed: Total 0, in Process Q: 0
    Pool Counts:
    Message: 1, Link: 1, Ack: 1, Match: 1
    [oracle@bnl11237dat01 ~]$
    [root@bnl11237dat01 ~]# /u01/app/11.2.0/grid/bin/crsctl stop crs
    CRS-2791: Starting shutdown of Oracle High Availability Services-managed resources on 'bnl11237dat01'
    CRS-2673: Attempting to stop 'ora.crsd' on 'bnl11237dat01'
    CRS-2790: Starting shutdown of Cluster Ready Services-managed resources on 'bnl11237dat01'
    CRS-2673: Attempting to stop 'ora.bnl11237dat01.vip' on 'bnl11237dat01'
    CRS-2673: Attempting to stop 'ora.oc4j' on 'bnl11237dat01'
    CRS-2673: Attempting to stop 'ora.cvu' on 'bnl11237dat01'
    CRS-2673: Attempting to stop 'ora.LISTENER_SCAN1.lsnr' on 'bnl11237dat01'
    CRS-2673: Attempting to stop 'ora.LISTENER.lsnr' on 'bnl11237dat01'
    CRS-2673: Attempting to stop 'ora.LISTENER_SCAN3.lsnr' on 'bnl11237dat01'
    CRS-2673: Attempting to stop 'ora.LISTENER_SCAN2.lsnr' on 'bnl11237dat01'
    CRS-2677: Stop of 'ora.bnl11237dat01.vip' on 'bnl11237dat01' succeeded
    CRS-2677: Stop of 'ora.cvu' on 'bnl11237dat01' succeeded
    CRS-2677: Stop of 'ora.LISTENER_SCAN1.lsnr' on 'bnl11237dat01' succeeded
    CRS-2673: Attempting to stop 'ora.scan1.vip' on 'bnl11237dat01'
    CRS-2677: Stop of 'ora.LISTENER.lsnr' on 'bnl11237dat01' succeeded
    CRS-2673: Attempting to stop 'ora.bnl11237dat02.vip' on 'bnl11237dat01'
    CRS-2677: Stop of 'ora.LISTENER_SCAN3.lsnr' on 'bnl11237dat01' succeeded
    CRS-2673: Attempting to stop 'ora.scan3.vip' on 'bnl11237dat01'
    CRS-2677: Stop of 'ora.LISTENER_SCAN2.lsnr' on 'bnl11237dat01' succeeded
    CRS-2673: Attempting to stop 'ora.scan2.vip' on 'bnl11237dat01'
    CRS-2677: Stop of 'ora.scan1.vip' on 'bnl11237dat01' succeeded
    CRS-2677: Stop of 'ora.bnl11237dat02.vip' on 'bnl11237dat01' succeeded
    CRS-2677: Stop of 'ora.scan3.vip' on 'bnl11237dat01' succeeded
    CRS-2677: Stop of 'ora.scan2.vip' on 'bnl11237dat01' succeeded
    CRS-2677: Stop of 'ora.oc4j' on 'bnl11237dat01' succeeded
    CRS-2673: Attempting to stop 'ora.ons' on 'bnl11237dat01'
    CRS-2677: Stop of 'ora.ons' on 'bnl11237dat01' succeeded
    CRS-2673: Attempting to stop 'ora.net1.network' on 'bnl11237dat01'
    CRS-2677: Stop of 'ora.net1.network' on 'bnl11237dat01' succeeded
    CRS-2792: Shutdown of Cluster Ready Services-managed resources on 'bnl11237dat01' has completed
    CRS-2677: Stop of 'ora.crsd' on 'bnl11237dat01' succeeded
    CRS-2673: Attempting to stop 'ora.mdnsd' on 'bnl11237dat01'
    CRS-2673: Attempting to stop 'ora.crf' on 'bnl11237dat01'
    CRS-2673: Attempting to stop 'ora.ctssd' on 'bnl11237dat01'
    CRS-2673: Attempting to stop 'ora.evmd' on 'bnl11237dat01'
    CRS-2673: Attempting to stop 'ora.cluster_interconnect.haip' on 'bnl11237dat01'
    CRS-2677: Stop of 'ora.cluster_interconnect.haip' on 'bnl11237dat01' succeeded
    CRS-2677: Stop of 'ora.mdnsd' on 'bnl11237dat01' succeeded
    CRS-2677: Stop of 'ora.crf' on 'bnl11237dat01' succeeded
    CRS-2677: Stop of 'ora.evmd' on 'bnl11237dat01' succeeded
    CRS-2677: Stop of 'ora.ctssd' on 'bnl11237dat01' succeeded
    CRS-2673: Attempting to stop 'ora.cssd' on 'bnl11237dat01'
    CRS-2677: Stop of 'ora.cssd' on 'bnl11237dat01' succeeded
    CRS-2673: Attempting to stop 'ora.gipcd' on 'bnl11237dat01'
    CRS-2673: Attempting to stop 'ora.diskmon' on 'bnl11237dat01'
    CRS-2677: Stop of 'ora.gipcd' on 'bnl11237dat01' succeeded
    CRS-2673: Attempting to stop 'ora.gpnpd' on 'bnl11237dat01'
    CRS-2677: Stop of 'ora.diskmon' on 'bnl11237dat01' succeeded
    CRS-2677: Stop of 'ora.gpnpd' on 'bnl11237dat01' succeeded
    CRS-2793: Shutdown of Oracle High Availability Services-managed resources on 'bnl11237dat01' has completed
    CRS-4133: Oracle High Availability Services has been stopped.
    [root@bnl11237dat01 ~]# /u01/app/11.2.0/grid/bin/crsctl start crs
    CRS-4123: Oracle High Availability Services has been started.
    [root@bnl11237dat01 ~]# /u01/app/11.2.0/grid/bin/crsctl check crs
    CRS-4638: Oracle High Availability Services is online
    CRS-4535: Cannot communicate with Cluster Ready Services
    CRS-4530: Communications failure contacting Cluster Synchronization Services daemon
    CRS-4534: Cannot communicate with Event Manager
    I am unable to start Oracle Cluster Service on 11.2.0.2. Please can I know what the problem is and how to start CRS
    thanks.

    Hi,
    after the crsctl start crs you have to wait a while till the clusterstack is up. You just issued crsctl check crs a little to early.
    To see the startup stack do a crsctl stat res -t -init.
    If not everything in crsctl stat res -t -init goes to online after a while, then you have a problem, which has to be analyzed.
    However if crsctl stat res -t -init show everything is started use crsctl stat res -t to see the other processes coming online.
    Can you post the crsctl stat res -t -init (if not everything is online) or a crsctl stat res -t.
    Only thing which I find strange is that oifcfg does not list a PUBLIC interface...
    Regards
    Sebastian

  • PJC set_custom_property gives unable to communicate with runtime process

    Hi
    I am modifying a PJC that extends VTextItem to act as a hyperlink I have registered a property in the PJC with the following code:
    public static final ID activeColor = ID.registerProperty("ACTIVE_COLOUR");
    I then attempt to set the property from my form with the following code
    set_custom_property('icr_block1.icr_details',lv_rec_number,'ACTIVE_COLOUR','45,213,169');
    icr_block1.icr_details is a text item that has the PJC as its implementation class. The following error appears in the java console
    oracle.forms.net.ConnectionException: Forms session <5> aborted: unable to communicate with runtime process
    Anybody have any ideas?
    many thanks
    paul schweiger

    Permission granted - here is the full java code. When I set_custom_property in the form neither of the debug messages in the java fire
    package pjcs;
    //package totem.forms.extensions;
    import java.awt.*;
    import java.awt.event.*;
    import java.util.StringTokenizer;
    import oracle.forms.properties.ID;
    import oracle.forms.ui.VTextField;
    public class TextLink extends VTextField
         public static final ID treatAsLink = ID.registerProperty("TREAT_AS_LINK");
    public static final ID activeColor = ID.registerProperty("ACTIVE_COLOUR");
    public static final ID visitedColor = ID.registerProperty("VISITED_COLOUR");
    private Cursor defaultCursor;
    private Cursor hoverCursor;
    private String pTreatAsLink = "YES";
    private Color pActiveColor;
    private Color pVisitedColor;
    private Color pNormalColor;
    private boolean m_debug = true;
    private boolean m_debugAll;
    private final String CLASSNAME = this.getClass().getName();
         public TextLink()
              try
                   jbInit();
              catch(Exception e)
                   e.printStackTrace();
         private void jbInit() throws Exception
              log("start text link");
    // Get reference to standard cursor
              defaultCursor = this.getCursor();
              // Create hand cursor for hover state
    hoverCursor = new Cursor(Cursor.HAND_CURSOR);
              // Add mouse listeners for changing cursor
              // Anonymous class used for simplicity
              this.addMouseListener(new MouseAdapter()
                   public void mouseEntered(MouseEvent me)
                        // Set hover cursor if field contains text
                        if (getText().length() > 0 && pTreatAsLink == "YES")
                             setCursor(hoverCursor);
    pNormalColor = getForeground();
    setForeground(pActiveColor);
                   public void mouseExited(MouseEvent me)
                        // Change cursor back
    if (pTreatAsLink == "YES")
                        setCursor(defaultCursor);
    setForeground(pNormalColor);
    * set the properties of the bean
    public boolean setProperty(ID property, Object value)
    log("set prop");
    if (property == treatAsLink)
    pTreatAsLink = value.toString();
    return true;
    else if (property == activeColor)
    pActiveColor = stripColour(value) ;
    return true;
    else if (property == visitedColor)
    pVisitedColor = stripColour(value) ;
    return true;
    else
    return super.setProperty(property, value);
    private Color stripColour(Object pColour) {
    String color = pColour.toString().trim();
    int r=-1, g=-1, b=-1, c=0 ;
    StringTokenizer st = new StringTokenizer(color,",");
    while (st.hasMoreTokens()) {
    c = new Integer((String)st.nextToken()).intValue() ;
    if( (c <0) || (c > 255) ) c = 0 ;
    if( r == -1 ) r = c ;
    else if( g == -1 ) g = c ;
    else if( b == -1 ) b = c ;
    return (new Color(r,g,b));
    public void log(String msg)
    if(m_debug||m_debugAll)
    System.out.println(CLASSNAME + ": " + msg);
    }

Maybe you are looking for

  • Issues with iTunes after upgrading to Lion OS v10.7

    Hello my sabi friends out there, I just upgrated to Lion OS v10.7, everything seemed to be in order, however, I lost ALL my playlists on iTunes, in addition, some music never transfered to iTunes. I tried to restore iTunes from my last back up, howev

  • Proxy Runtime errors in Integration Engines at RWB

    Hi Experts, We have configured the point to point configuration scenario in our landscape. I have two ABAP systems exchanges data using PI. I have configured both the ABAP systems as Application Systems and Corresponding Integration server as my PI s

  • How can i activate iphone 4 on ios6 without a sim card?

    how can i activate iphone 4 on ios6 without a sim card?i upgraded mu iphone to ios but the iphone is factory locked so i can not activate it with a sim card because i dont have the original sim card.is another way to do it?

  • The download doesn't work for me

    Neither Win nor Mac verions of the ZIP file link work. Either an empty file or it's not working...

  • MacBook Pro 15'' mid 2012 does not boot

    Hi We upgraded our MacBook Pro 15'' (mid 2012) we changed the memory from 4GB to 16GB, changed the hard-disk for a 512GB Samsung SSD and installed 10.10 Yosemite (clean install) Everything worked OK, we installed some software. All of a sudden the la