Cannot Compare 2 images in CS4

It appears I cannot compare 2 images with different file extensions in CS4.
I am trying to compare a cr2 and psd image but cannot find how.
Need advice.

I assume you're looking to make a visual comparison...
Open both images in Photoshop.
Use the button at the top that will tile both Windows side by side:
If, instead, you're looking to place one image over the other then blink back and forth or maybe use Difference mode mixing to see what pixels are different and by how much, make the first image current, Select - All, Edit - Copy, make the second image current, Edit - Paste. Then make the Layers panel visible and manipulate the visibility or mixing mode of the top layer.
-Noel

Similar Messages

Please help, cannot compare images in full screen mode

I am not able to compare 2 images in full screen mode. I am using a MBP and a ACD 23". The main image will remain in the ACD while the image being compare is being shown in the MBP.
I am able to compare images in the viewer mode.
My main display is the ACD 23 which I selected using the display preferences under 'Arrangement' with the menu bar located on the ACD. In Aperture, Secondary Viewer is set to Blank.
I had also tried different combinations of Main Viewer and Secondary Viewer settings but was not successful.
Am I missing something? Anyone have the solution?Thanks in advance for any help.
norheng

Anyone have any suggestions to using Aperture to edit images using a MBP and ACD so that it best utilize Aperture full screen mode in comparing and narrowing down to the pick.
I am now trying to use the MBP as the main display and ACD as the secondary. This way I am able to compare images with the MBP in the Browser mode and the ACD display the compare images full screen. It work with the secondary display - ACD set to mirror, span and alternate mode.
It would be best if only one screen is use and hence save energy consumption (reducing global warming and bill, if it help).
Thanks in advance for any suggestions or and solutions.
norheng

Please confirm, I cannot open RAW images in CS2 from EOS 50D

Platform: XP Pro SP3
After shooting my first session using the new Canon EOS 50D DSLR I cannot open RAW images in Photoshop CS2. Canon told me there was a free upgrade available to replace my current RAW editor ver. 3.7 BUT it appears from what I've read that I must buy CS4 to open RAW files created in the new Canon 50D. Thank you for your efforts.

> ... from what I've read that I must buy CS4 to open RAW files created in the new Canon 50D.
Considering the $$ you paid for the 50D, updating CS2 to CS4 for the sake of all the improvements in ACR would be well worth the $200.
my CA$0.02 :)

Cannot open raw files on CS4 extended even with plug in

Cannot open raw files from canon eos 400d in photoshop Cs4 extended. I have updated camera raw plug in and DNG converter but still no luck! I cannot get the images off the camera onto a file. Help, images of my 5 month old daughter are on the camera from when she was born!

>I cannot get the images off the camera onto a file.
I presume you're on PC (since you don't bother to give that rather critical bit of info). On Windows you'll have to set your camera to be a mass storage device in order to even see the raw files. Best bet is use a card reader as you really shouldn't be trying to transfer image files directly from the camera. It's really slow and as you've found out, it's not "easy" like a card reader.

When a pop up window comes up it is - search bookmarks and history window! I cannot log into my bank as login button should open new window to log in but I get the search page. I cannot see larger images as again I get the search bookmarks and history pa

When a pop up window comes up it is - search bookmarks and history window! I cannot log into my bank as login button should open new window to log in but I get the search page. I cannot see larger images as again I get the search bookmarks and history page etc. Happens on all options that should open new page. I am so frustrated, this has been happening since Firefox updated itself 2 days ago to Mozilla/5.0 (Windows; U; Windows NT 6.0; en-GB; rv:1.9.2.8) Gecko/20100722 Firefox/3.6.8 ( .NET CLR 3.5.30729; .NET4.0C) was fine before that. using windows vista. Can you please advise what I should do? Also can you go back to previous version? Error console eg
Warning: Error in parsing value for 'cursor'. Declaration dropped.
Source File: https://ib.nab.com.au/nabib/styles/menu_nab.css?id=009
Line: 116
ib.nab.com.au : server does not support RFC 5746, see CVE-2009-3555 and Warning: Selector expected. Ruleset ignored due to bad selector.
Source File: https://ib.nab.com.au/nabib/styles/nabstyle.css?id=014
Line: 837
== This happened ==
Every time Firefox opened
== 2 days ago after update.

Do you have that problem when running in the Firefox SafeMode?
[http://support.mozilla.com/en-US/kb/Safe+Mode]
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this:
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

Cannot stamp multiple images anymore

running v 3.2.1 and I cannot stamp multiple images any more. I can lift and stamp one at a time but when I select to end and attempt to stamp it only stamps the last image in the batch. any help is appreciated!
Thanks Dave

Hello Dave,
Check if you have "Primary only" activated.
That looks like a case of "Primary only".
If you have set the "Primary only"-flag, any changes only apply to one image of the selection.
Uncheck the button with the "1" in a square above the film strip.
You can also deselect this option from the "Edit" menu.
Regards
Léonie

Cannot move some images in iPhoto to desktop

I cannot move an image from iPhoto to my desktop. Also, when I click on the image in iPhoto to enlarge it, I get an exclamation point. When the image is small size in iphoto, I can see it. But if I click on it to enlarge it in iphoto, I get the exclamation point. Don't know why this is happening? I have Iphoto 09, version 8.1.2 (424) My goal: Be able to move any image in iphoto to my desktop and not get the exclamation point anymore.
Message was edited by: rjduffy61

The ! turns up when iPhoto loses the link to the original image - and that's why you can move it to the desktop.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

OSX Mountain Lion - Cannot change desktop image

I used an image I'd downloaded as desktop wallpaper. I have tried to change it to the default image, other images, sold colours, but the same image always returns after I reboot (warm and cold boots). Note that I can change the desktop image, but it always reverts back to the old image. The changes do not stick. I cannot locate the image in Finder. Any ideas?

I have the same situation as Marc; however, I do not have access to images. The multicolor circle keeps turning.
This application (Desktop & Screen Saver) is not working anymore.
Thank you.
Guillermo

When I open an image in Photoshop, I cannot see the file. The thumbnail in on the right, but I cannot see the image on the work area. I am using Windows 8

When I open Photoshop CS6 I cannot view the image. The thumbnail is visible on the right hand side and the work area shows the file information, but no image. I have updated PS, my driver. It is the same for both jpg or RAW.

Be sure your graphics drivers are up to date. Try disabling GPU acceleration in the preferences then restart Photoshop.
Benjamin

I cannot move photos from iphone to MacBook. I get an error message that says: Error downloading image. iPhoto cannot import your images because there was a problem downloading an image. How can I fix/remedy this?

I am receiving an error message every time I plug my iPhone 4S into my MacBook: Error downloading image. iPhoto cannot import your images because there was problem downloading an image. How can I fix/remedy this?

try Image Capture - in your applications folder
LN

How can I add a PSD logo watermark file to an image in CS4 or Lightroom3?

Hi,
I have a psd file with my company logo as a watermark. How can I add that file to an image in CS4 or Lightroom3. I am sure it is really simple and I am just a bit dopey but would appreciate the help.
Thanks.
Natalie

This is fully explained in the help file. Hit F1 and go to using the watermark editor, you will see there is is also a video tutorial so I won't repeat the advice here.
You will need to change the PSD to a PNG in order to use it and retain any transparency layers. Open the file in Photoshop and choose save for web, then select either the PNG 8 or PNG 24 preset and save a copy of the file.

Extra white space around image in CS4

Hi - We are planning to migrate from Indesign server CS3 to CS4. In order to make sure that the existing templates, created out of CS3 works out of CS4, we were doing some testing with indds created out of CS3. We export the output as jpeg at 300 dpi. The output image running in CS3 server was 3060 x 2160, but the image from CS4 has 3600 x 2700. Can anyone explain us here, if there is some setting that needs to be changed to use indd's out of CS3? if not, pls advice us on what is going wrong here. This is urgent!!
Thanks and let me know if you have any questions or need more information.

Does this outline appear if converting to PDF or other format and then printing? What if you save it as a Photoshop EPS and let Photoshop create the TIFF... does the map still print with a white line?
If the problem is map related, you might ask in the CartoTalk forum:
http://www.cartotalk.com/index.php?s=e3bd05acac124d5abe83020daf94b05f&act=idx
There are some FreeHand map makers there who could help.

Cannot view jpeg images in windows photo viewer (windows 7 32 bit)

When i open any jpeg image in windows photo viewer, it opens but shows nothing, only black plain image is displayed like below.
I am using adobe cs5 bridge and cannot preview the images in bridge as well, instead same black preview is shown.
Any one can help please....this is getting too much irritating for me.
Thanks!

This has helped me with a similar situation. http://answers.microsoft.com/en-us/windows/forum/windows_rt-pictures/windows-photo-viewer-suddenly-w...

Cannot view certain images

I cannot view certain images, and I have already checked my settings a few times over. This only occurs occasionally with deviantart. Previously I came across a way to correct this, but it's been so long now that I've needed to adjust it that I've forgotten. So my question: Is there a way to adjust things so that the differently sized images appear regardless of pixel amount? It tends to be either only the preview or fullsize image on DA. Also, though I've Adblock Plus now, this happened even before.
== URL of affected sites ==
http://deviantart.com

It is possible that you accidentally clicked the 'Block Images' item in the right click context menu while trying to save an image.
Check the image exceptions: Tools > Options > Content: Load Images: Exceptions - See [[Options window - Content panel]]
A way to see which images are blocked is to click the favicon (''Site Identification'' icon) on the left side of the location bar and click the "More Information" button.
This will open the Security tab of the ''Page Info'' window (also accessible via Tools > Page Info).
Go to the ''Media'' tab of that Page Info window.
Select the first image and scroll down though the list with the Down arrow.
If an image is grayed and there is a check-mark in the box ''Block Images from...'' then remove that mark to unblock the images from that domain.

Just downloaded CC 2014 trial. I cannot select any images and it's ruining the files

Just downloaded CC 2014 trial. I cannot select any images and it's ruining the files

Before reloading, I would try deleting the preferences. It may not help in this case, but it is worth a try.
In case you need help with that:
Reset Preferences
1) Close the program and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (not reversible)
or
2) Move the Folder. See:
http://www.bugge.com/Family-and-friends/Illy/illy.html
--OB

Cannot Compare 2 images in CS4

Similar Messages

Maybe you are looking for