Cannot compile on win98 and win2k platforms

I wrote a program:
public class averfruit
public static void main(String[] args)
int orange=50;
int apple=20;
int average=0;
average = (orange + apple) / 2;
System.out.println("Average no. of fruit is : " + average);
I tried the full path to compile it with jdk1.3 and j2sdk1.4.
Both incurred the same errors:
averfruit.java:11: illegal character: \0
int apple = 20;
100 errors
I also tried to run it on win2k and win98 platforms, same errors.
However, I can compile this program by JBuilder5.
So, what's wrong with my code, the jdk or my OS?
Thanks
gogo

Thanks a lot for your instruction and it can be compiled now.
Could you tell me how do you set the env't variables regarding the (1) path and (2) class path to the jdk1.4.../bin/ and jdk1.4.../lib/?
Regards
gogo

Similar Messages

Installing Solaris 9 on an x86 platform with win98 and win2K

Hi,
There is a Pentium P4 (2.4 GHz) machine with a 40 GB hard disk...
This has 1 primary partition and the remaining is the extended dos partition. In effect there are the following logical drives - C, D, E and F. These are FAT32 partitions and have WIN98 and WIN2K (server) installed on them.
There is a free space of abt 8 GB remaining on which i am trying to install Solaris 9 (via CD). But am just not able to do so.
During the process, i get to the step saying that my disk is to be partitioned and that i could either choose the DEFAULT LAYOUT or manually partition the disk with the fdisk.
Default layout indicates that there would be 1 x86 partition (primary, boot) and the remaining would be a solaris partition - implying that all my other data would get formatted out!!!
When i try to use the fdisk to manually partition the disk, the free space mntd above does not show up!!!
But this is seen when i use the DOS fdisk - i.e. i could create a logical drive on the extended dos partition...
Can some one please help me install the Solaris in the free space i have ?? Thanks.

Hello!
There is one simple method also..
Instead of Installation disk of Solaris, insert the Software 1/2 Disk, and try to follow the actuall Suninstall method of installing Solaris. Here you will get the option that how to utilize the free space.
I myself have installed more 5 OS on a single Hard disk :) this way. Try this method

Cannot compile Java files or create Java Project

Hi,
I cannot compile java files and also didn't see any option
for creating java project using flex 2 builder.
Actually am trying to create a FDS project with an option to
compile on the server. I am using Weblogic 8.1 SP5 as my server.
thank you
sun

hi
this is may jvm.config file. Can anyone tell me if it is
right because all the fields are blank.
# VM configuration
# Where to find JVM, if {java.home}/jre exists then that JVM
is used
# if not then it must be the path to the JRE itself
# If no java.home is specified a VM is located by looking in
these places in this
# order:
# 1) JAVA_HOME environment variables (same rules as java.home
above)
# 2) bin directory for java.dll (windows) or
lib/<ARCH>/libjava.so (unix)
# 3) ../jre
# 4) registry (windows only)
java.home=C:\Adobe\Flex Builder 2.0 Beta 3\Flex SDK 2.0\jre
# Arguments to VM
java.args=-ea -Xmx384m
# Environment variables we care about, whitespace-separated
env=
# java.class.path - use this for adding individual jars or
# directories. When directories are included they will be
searched
# for jars and zips and they will be added to the classpath
(in
# addition to the directory itself), the jar to be used in
launching
# will be appended to this classpath
java.class.path=C:\Adobe\Flex Builder 2.0 Beta 3\Flex SDK
2.0\jre
# where to find shared libraries, again use commas to
separate entries
java.library.path=
thanks
sun

[SOLVED] Cannot compile dvb drivers.

Hi,
I'm setting up a htpc media center based on arch with mythtv and xbmc. I've installed the base and base-devel packages and I need to compile the tbs-dvb-drivers to make my TBS 6280 DVB-T2 card work.
Unfortunately I cannot compile the drivers as the compile process seems to enter in a loop, it continues to show the following output:
TBS drivers configured for x86_64 platform.
make -C /home/media/tbs-dvb-drivers/src/linux-tbs-drivers/v4l
make[1]: ingresso nella directory "/home/media/tbs-dvb-drivers/src/linux-tbs-drivers/v4l"
scripts/make_makefile.pl
./scripts/make_kconfig.pl /lib/modules/3.11.6-1-ARCH/build /lib/modules/3.11.6-1-ARCH/build
Preparing to compile for kernel version 3.11.6
***WARNING:*** You do not have the full kernel sources installed.
This does not prevent you from building the v4l-dvb tree if you have the
kernel headers, but the full kernel source may be required in order to use
make menuconfig / xconfig / qconfig.
If you are experiencing problems building the v4l-dvb tree, please try
building against a vanilla kernel before reporting a bug.
Vanilla kernels are available at http://kernel.org.
On most distros, this will compile a newly downloaded kernel:
cp /boot/config-`uname -r` <your kernel dir>/.config
cd <your kernel dir>
make all modules_install install
Please see your distro's web site for instructions to build a new kernel.
./scripts/make_myconfig.pl
scripts/make_makefile.pl
./scripts/make_kconfig.pl /lib/modules/3.11.6-1-ARCH/build /lib/modules/3.11.6-1-ARCH/build
Preparing to compile for kernel version 3.11.6
***WARNING:*** You do not have the full kernel sources installed.
This does not prevent you from building the v4l-dvb tree if you have the
kernel headers, but the full kernel source may be required in order to use
make menuconfig / xconfig / qconfig.
If you are experiencing problems building the v4l-dvb tree, please try
building against a vanilla kernel before reporting a bug.
Vanilla kernels are available at http://kernel.org.
On most distros, this will compile a newly downloaded kernel:
cp /boot/config-`uname -r` <your kernel dir>/.config
cd <your kernel dir>
make all modules_install install
Please see your distro's web site for instructions to build a new kernel.
./scripts/make_myconfig.pl
scripts/make_makefile.pl
./scripts/make_kconfig.pl /lib/modules/3.11.6-1-ARCH/build /lib/modules/3.11.6-1-ARCH/build
Preparing to compile for kernel version 3.11.6
***WARNING:*** You do not have the full kernel sources installed.
This does not prevent you from building the v4l-dvb tree if you have the
kernel headers, but the full kernel source may be required in order to use
make menuconfig / xconfig / qconfig.
If you are experiencing problems building the v4l-dvb tree, please try
building against a vanilla kernel before reporting a bug.
Vanilla kernels are available at http://kernel.org.
On most distros, this will compile a newly downloaded kernel:
cp /boot/config-`uname -r` <your kernel dir>/.config
cd <your kernel dir>
make all modules_install install
Please see your distro's web site for instructions to build a new kernel.
./scripts/make_myconfig.pl
scripts/make_makefile.pl
./scripts/make_kconfig.pl /lib/modules/3.11.6-1-ARCH/build /lib/modules/3.11.6-1-ARCH/build
Preparing to compile for kernel version 3.11.6
I've waited up to 20 minutes, but the process seems stucked and the size of the folder doesn't grow up.
It's true that I have just the kernel-headers installed. In addition make continues to warn me that the edit date of several files is newer than the actual. Initially the date of the system was wrong (but not older than the file's) but now I've fixed it with the correct date in UTC. The problem persists.
I've also tried to compile from source directly but make enters into the same loop and gives me the same warnings.
Thank you in advance for any kind of help.
Regards.
Last edited by fasigno (2013-11-03 21:40:00)

First make sure you have the core-devel package group installed. This is required to build AUR package in general.
Next, check to see if you have kernel-headers and v4l-utils installed? If not install them both and try again. I'm not sure if they are hard dependancies or not.
EDIT: Sorry, I see you wrote that you installed core-devel and kernel-headers already. It looks like you may have a time zone and hardware clock sync problem. If you just installed arch, make sure the timezone and locale are correct and havn't been altered since you first installed your system. If that's all good, then install the AUR package cleanly from scratch again.
Do you have NTP running?
Last edited by wdirksen (2013-11-03 20:36:18)

Can i use a GCC compiler on MacOSX and link this C Code to lbv 6.1 on OS9?

I am interested in compiling my C code on the free GCC compiler which works with Mac OS X but am concerned that I will not be able to connect this with the Call library function and CINs in labview 6.1 that runs on Mac OS 9. Am I able to cross platforms and use the .so file with lbv 6.1 on OS 9? What problems will i most likely encounter or should watch out for? Thanks!

Unfortunately, you cannot port shared objects across these platforms. You are going to have to recompile the .so file on OS 9 for use in the call library function node.
Robert Mortensen
Software Engineer
National Instruments

Cannot compile project after change to "any cpu" randomly

Hi,
in my VS 2013 i had changed the solution from x86 to "any cpu" in the debug-settings, the build-settings etc.
Now sometimes i try to build it it gives the error "Generate ressource cannot be executed because
it cannot connect to "CLR2" and Architecture "x86" - please make sure(1) runtime and architecture is avilable and(2) the file
"C:\Program Files (x86)\MSBuild\12.0\bin\MSBuildTaskHost.exe" exists
I do not know why that is, it should compile in x64 since my os is 64 bit. The workaround is to delete the exe in my debug-folder and then let the vs build it again.
Sometimes it can work for days after that workaround to build newer versions, then magically it breaks again.
Looking at the .vbproj-file from another project that was "any cpu" from the start i learned that some x86-stuff is still in my config of the project that has the issue.
My question is now if you recommend to "just change it" or if just editing the file to look like that other project will not do it all.
My vbproj-file from my project looks like this
Microsoft Visual Studio Solution File, Format Version 12.00
# Visual Studio Express 2013 for Windows Desktop
VisualStudioVersion = 12.0.31101.0
MinimumVisualStudioVersion = 10.0.40219.1
Project("{F184B08F-C81C-45F6-A57F-5ABD9991F28F}") = "SAP-Toolbox", "SAP-Toolbox\SAP-Toolbox.vbproj", "{165D1482-8BEB-4247-98EA-0A4040331290}"
EndProject
Global
GlobalSection(SolutionConfigurationPlatforms) = preSolution
Debug|Any CPU = Debug|Any CPU
Debug|x86 = Debug|x86
Release|Any CPU = Release|Any CPU
Release|x86 = Release|x86
EndGlobalSection
GlobalSection(ProjectConfigurationPlatforms) = postSolution
{Guid}.Debug|Any CPU.ActiveCfg = Debug|Any CPU
{165D1482-8BEB-4247-98EA-0A4040331290}.Debug|Any CPU.Build.0 = Debug|Any CPU
{165D1482-8BEB-4247-98EA-0A4040331290}.Debug|x86.ActiveCfg = Debug|x86
{165D1482-8BEB-4247-98EA-0A4040331290}.Debug|x86.Build.0 = Debug|x86
{165D1482-8BEB-4247-98EA-0A4040331290}.Release|Any CPU.ActiveCfg = Release|Any CPU
{165D1482-8BEB-4247-98EA-0A4040331290}.Release|Any CPU.Build.0 = Release|Any CPU
{165D1482-8BEB-4247-98EA-0A4040331290}.Release|x86.ActiveCfg = Release|x86
{165D1482-8BEB-4247-98EA-0A4040331290}.Release|x86.Build.0 = Release|x86
EndGlobalSection
GlobalSection(SolutionProperties) = preSolution
HideSolutionNode = FALSE
EndGlobalSection
EndGlobal
cheers

Hi mrsnipes,
According to your description, I suggest you could try to close the VS and then re-open the VS2013, then clean build solution-> re-build your solution and then check if the project/solution can be built successfully.
When I tried to change the solution platform to Any CPU, I found that it work fine. So to check if the issue occurs the specified project/solution or VS IDE, please try to create a simple new VB project in VS 2013 Express for Windows Desktop and
then right-click your solution->Properties->Configuration properties->Configuration Manager->Change the Active solution platform to the Any CPU check this issue again.
(1) If you still get same error, maybe you will need to repair or re-install the VS 2013 Express for Windows Desktop check this issue again.
(2) If you did not get same error in a new project, I doubt that this issue maybe more related to your specified project, so please try to create a blank solution and then add the project into the blank solution.
As you said the error message, I suggest you also refer the following article check if it can help you solve this issue.
https://cyanbyfuchsia.wordpress.com/2014/06/11/could-not-run-the-generateresource-task-because-msbuild-could-not-create-or-connect-to-a-task-host-with-runtime-clr2-and-architecture-x86/
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Cannot Compile when using FileInputStream

I am trying to read data from a file...
I cannot compile this and I have tried importing all of the java.io.* classes and it still does not compile.
Help!
I have the following imports:
import net.rim.device.api.ui.*;
import net.rim.device.api.system.Application;
import javax.microedition.io.*;
import javax.microedition.io.file.*;
import java.io.*;
import net.rim.device.api.ui.component.*;
import net.rim.device.api.ui.container.*;
import net.rim.device.api.system.Bitmap;
import net.rim.device.api.system.*;
import JavaProjects.JDE42.EmergInfo.Resource.*;
import net.rim.device.api.i18n.*;
And the code snippet:
private void ReadDataFile()
try {
FileInputStream fstream = new FileInputStream(_resources.getString(EmergInfoResResource.DWI_DATAFILE));
DataInputStream in = new DataInputStream(fstream);
BufferedReader br = new BufferedReader(new InputStreamReader(in));
String strLine;
//Read File Line By Line
while ((strLine = br.readLine()) != null) {
// Print the content on the console
System.out.println (strLine);
//Close the input stream
in.close();
}catch (Exception e){//Catch exception if any
System.err.println("Error: " + e.getMessage());
On compile, I get the following errors:
Building EmergInfo_DWI
C:\Program Files\Research In Motion\BlackBerry JDE 5.0.0\bin\rapc.exe -quiet codename=EmergInfo_DWI EmergInfo_DWI.rapc warnkey=0x52424200;0x52525400;0x52435200 import="C:\Program Files\Research In Motion\BlackBerry JDE 5.0.0\lib\net_rim_api.jar" D:\JavaProjects\JDE42\EmergInfo\img\DWI_Main.jpg D:\JavaProjects\JDE42\EmergInfo\img\DWI_Main_bw.jpg D:\JavaProjects\JDE42\EmergInfo\Resource\EmergInfoRes.rrc D:\JavaProjects\JDE42\EmergInfo\Resource\EmergInfoRes.rrh D:\JavaProjects\JDE42\EmergInfo\Source\DWI_Main.java D:\JavaProjects\JDE42\EmergInfo\Source\DWI_Main_Screen.java
D:\JavaProjects\JDE42\EmergInfo\Source\DWI_Main.java:68: cannot find symbol
symbol : class FileInputStream
location: class Source.DWI_Main
FileInputStream fstream = new FileInputStream(_resources.getString(EmergInfoResResource.DWI_DATAFILE));
^
D:\JavaProjects\JDE42\EmergInfo\Source\DWI_Main.java:68: cannot find symbol
symbol : class FileInputStream
location: class Source.DWI_Main
FileInputStream fstream = new FileInputStream(_resources.getString(EmergInfoResResource.DWI_DATAFILE));
^
D:\JavaProjects\JDE42\EmergInfo\Source\DWI_Main.java:72: cannot find symbol
symbol : class BufferedReader
location: class Source.DWI_Main
BufferedReader br = new BufferedReader(new InputStreamReader(in));
^
D:\JavaProjects\JDE42\EmergInfo\Source\DWI_Main.java:72: cannot find symbol
symbol : class BufferedReader
location: class Source.DWI_Main
BufferedReader br = new BufferedReader(new InputStreamReader(in));
^
4 errors

What I have installed:
Blackberry JDE 4.2.0
Blackberry JDE 5.0.0
Java DB 10.5.3.0
Java SE Development Kit Update 22
Java Platform, Enterprise Edition 5 SDK
Seems I do not have the ME stuff installed...
Edited by: 802969 on Oct 16, 2010 2:07 PM

PLS-00304: cannot compile body of package without its specification

Hi all,
While compiling the below pasted package , I got the following error msg.
PL/SQL: Compilation unit analysis terminated
PLS-00304: cannot compile body of 'EDR_RPT_CLASS_BY_TAWT_PACKAGE'
without its specification
PLS-00905: object HDOT.EDR_RPT_CLASS_BY_TAWT_PACKAGE is invalidBut I believe that have declared package and ppackage body specification correctly. Please could anyone help me to find out the error
CREATE OR REPLACE PACKAGE edr_rpt_class_by_tawt_package AS
PROCEDURE edr_rpt_gen_class_by_tawt (
in_report_parameter_id   IN      report_tasks.report_task_id%TYPE,
report_data              OUT     SYS_REFCURSOR,
chart_data               OUT     SYS_REFCURSOR,
footer_data              OUT     SYS_REFCURSOR
PROCEDURE edr_rpt_gen_class_by_fawt (
in_report_parameter_id   IN      report_tasks.report_task_id%TYPE,
report_data              OUT     SYS_REFCURSOR,
chart_data               OUT     SYS_REFCURSOR,
footer_data              OUT     SYS_REFCURSOR
PROCEDURE edr_rpt_gen_class_by_sawt (
in_report_parameter_id   IN      report_tasks.report_task_id%TYPE,
report_data              OUT     SYS_REFCURSOR,
chart_data               OUT     SYS_REFCURSOR,
footer_data              OUT     SYS_REFCURSOR
PROCEDURE edr_rpt_gen_class_by_triawt (
in_report_parameter_id   IN      report_tasks.report_task_id%TYPE,
report_data              OUT     SYS_REFCURSOR,
chart_data               OUT     SYS_REFCURSOR,
footer_data              OUT     SYS_REFCURSOR
PROCEDURE edr_rpt_gen_class_by_qawt (
in_report_parameter_id   IN      report_tasks.report_task_id%TYPE,
report_data              OUT     SYS_REFCURSOR,
chart_data               OUT     SYS_REFCURSOR,
footer_data              OUT     SYS_REFCURSOR
FUNCTION class_count
in_lane_id                  edr_rpt_by_ranges_output.lane_id%TYPE,
in_direction_id             edr_rpt_by_ranges_output.direction_id%TYPE,
in_interval_start_date_time edr_rpt_by_ranges_output.interval_start_date_time%TYPE,
in_interval_end_date_time   edr_rpt_by_ranges_output.interval_start_date_time%TYPE,
in_axle_wt_min              edr_cls_by_tawt_report_data.group_weight%TYPE,
iin_axle_wt_max             edr_cls_by_tawt_report_data.group_weight%TYPE,
in_class_min                edr_cls_by_tawt_report_data.vehicle_class%TYPE,
in_class_max                edr_cls_by_tawt_report_data.vehicle_class%TYPE
RETURN VARCHAR2;
END edr_rpt_class_by_tawt_package;
CREATE OR REPLACE PACKAGE BODY edr_rpt_class_by_tawt_package AS
   c_front_axle_only         CONSTANT axle_class.group_type%TYPE := -1;
   c_axle_single_group_type CONSTANT axle_class.group_type%TYPE := 1;
   c_axle_tandem_group_type CONSTANT axle_class.group_type%TYPE := 2;
   c_axle_tridem_group_type CONSTANT axle_class.group_type%TYPE := 3;
   c_axle_quadrem_group_type CONSTANT axle_class.group_type%TYPE := 4;
   c_kips_conversion_unit_id CONSTANT units.unit_id%TYPE         := 8;
   v_report_axle_group_type axle_class.group_type%TYPE := 0;
FUNCTION class_count
in_lane_id                  edr_rpt_by_ranges_output.lane_id%TYPE,
in_direction_id             edr_rpt_by_ranges_output.direction_id%TYPE,
in_interval_start_date_time edr_rpt_by_ranges_output.interval_start_date_time%TYPE,
in_interval_end_date_time   edr_rpt_by_ranges_output.interval_start_date_time%TYPE,
in_axle_wt_min              edr_cls_by_tawt_report_data.group_weight%TYPE,
in_axle_wt_max              edr_cls_by_tawt_report_data.group_weight%TYPE,
in_class_min                edr_cls_by_tawt_report_data.vehicle_class%TYPE,
in_class_max                edr_cls_by_tawt_report_data.vehicle_class%TYPE
RETURN NUMBER
IS
my_count_result NUMBER(18);
BEGIN
   SELECT NVL(SUM(vehicle_count), 0 )
   INTO my_count_result
   FROM
        SELECT site_lane_id
        FROM   edr_rpt_tmp_report_lanes
        WHERE edr_rpt_tmp_report_lanes.output_lane_id        = in_lane_id
          AND edr_rpt_tmp_report_lanes.output_direction_id   = in_direction_id
       ) report_lanes
   JOIN edr_cls_by_tawt_report_data
     ON edr_cls_by_tawt_report_data.site_lane_id          = report_lanes.site_lane_id
   WHERE edr_cls_by_tawt_report_data.bin_start_date_time >= in_interval_start_date_time
     AND edr_cls_by_tawt_report_data.bin_start_date_time < in_interval_end_date_time
     AND edr_cls_by_tawt_report_data.group_weight >= in_axle_wt_min
     AND edr_cls_by_tawt_report_data.group_weight < in_axle_wt_max
     AND edr_cls_by_tawt_report_data.vehicle_class >= in_class_min
     AND edr_cls_by_tawt_report_data.vehicle_class <= in_class_max
   RETURN my_count_result;
END;
FUNCTION get_row_class_counts_text
RETURN VARCHAR2
IS
   my_row_counts_text VARCHAR2(10000);
   my_row_counts_entry VARCHAR2(10000);
   CURSOR row_counts_text IS
     SELECT 'edr_rpt_class_by_tawt_package.class_count('
                       ||'lane_id, '
                       ||'direction_id, '
                       ||'interval_start_date_time, '
                       ||'interval_end_date_time, '
                       ||'range_low, '
                       ||'range_high, '
                       || class_id || ', '
                       || class_id || ') "'|| class_id || '"'
     FROM edr_rpt_tmp_report_classes
     ORDER BY class_id;
BEGIN
my_row_counts_text   := '';
my_row_counts_entry := '';
-- generate the speed ranges function calls
OPEN row_counts_text;
LOOP
    FETCH row_counts_text INTO my_row_counts_entry;
    EXIT WHEN row_counts_text%NOTFOUND;
    my_row_counts_text := my_row_counts_text || ', ' || my_row_counts_entry;
END LOOP;
CLOSE row_counts_text;
RETURN my_row_counts_text;
END;
FUNCTION get_row_totals_text
RETURN VARCHAR2
IS
   my_row_count_total_text VARCHAR2(10000);
BEGIN
my_row_count_total_text := '';
-- generate the 'total' column function call
SELECT 'edr_rpt_class_by_tawt_package.class_count('
                       ||'lane_id, '
                       ||'direction_id, '
                       ||'interval_start_date_time, '
                       ||'interval_end_date_time, '
                       ||'range_low, '
                       ||'range_high, '
                       || MIN(class_id) || ', '
                       || MAX(class_id) || ') " "'
INTO my_row_count_total_text
FROM edr_rpt_tmp_report_classes;
RETURN ', ' || my_row_count_total_text;
END;
PROCEDURE apply_default_awt_ranges(in_report_parameter_id   IN   NUMBER)
IS
my_awt_ranges_count NUMBER(4);
BEGIN
SELECT nvl(count(1),0)
INTO my_awt_ranges_count
FROM report_range_parameters
WHERE REPORT_PARAMETER_ID = in_report_parameter_id
   AND REPORT_PARAMETER_GROUP = 'AXLE_GROUP'
   AND REPORT_PARAMETER_NAME = 'AXLE_NAME';
IF ( my_awt_ranges_count = 0 )
THEN
INSERT INTO report_range_parameters (REPORT_PARAMETER_ID, REPORT_PARAMETER_GROUP, REPORT_PARAMETER_NAME, REPORT_PARAMETER_MIN_VALUE, REPORT_PARAMETER_MAX_VALUE)
    VALUES (in_report_parameter_id, 'AXLE_GROUP', 'AXLE_NAME', '0', '2');
    VALUES (in_report_parameter_id, 'AXLE_GROUP', 'AXLE_NAME', '30', '32');
END IF;
END;
PROCEDURE edr_class_by_tawt_use_per_veh
   in_report_parameter_id   IN      report_tasks.report_task_id%TYPE,
   in_good_status_mask      IN      NUMBER
IS
max_axle_group_value NUMBER(12);
BEGIN
DELETE FROM edr_cls_by_tawt_report_data;
COMMIT;
INSERT INTO edr_cls_by_tawt_report_data
                  site_id,
                  site_lane_id,
                  site_direction_id,
                  site_direction_name,
                  bin_start_date_time,
                  group_weight,
                  bin_id,
                  bin_value
SELECT site_id,
         site_lane_id,
         site_direction_id,
         site_direction_name,
         date_time,
         group_weight,
         vehicle_class,
         COUNT(vehicle_class)
FROM
           SELECT edr_cls_by_tawt_per_veh_data.*
             FROM edr_cls_by_tawt_per_veh_data
     GROUP BY date_time,
           site_lane_id,
           group_weight,
           vehicle_class,
           site_id,
           site_direction_id,
           site_direction_name;
END edr_class_by_tawt_use_per_veh;
PROCEDURE edr_class_by_tawt_data_type
in_report_parameter_id   IN      report_tasks.report_task_id%TYPE,
in_good_status_mask      IN      NUMBER,
in_data_type             IN      VARCHAR2,
out_data_type_used          OUT VARCHAR2
IS
my_bin_entry_count   NUMBER(12,0);
my_veh_entry_count   NUMBER(12,0);
BEGIN
IF(UPPER(in_data_type) = 'BINNED') THEN
    -- Axle information can only be read from Per Vehicle data records
    --   - using bins-only is not a supported option
    RAISE_APPLICATION_ERROR(-20101,'Binned data cannot be used for this report.');
ELSIF    (UPPER(in_data_type) = 'PERVEHICLE')
        OR (UPPER(in_data_type) = 'COMBINED')
THEN
    out_data_type_used := 'Per Vehicle (All Vehicles)';
    edr_class_by_tawt_use_per_veh( in_report_parameter_id, in_good_status_mask );
ELSE
     RAISE_APPLICATION_ERROR(-20101,'The data type specified is not recognized.');
END IF;
END edr_class_by_tawt_data_type;
PROCEDURE edr_class_by_tawt_get_veh_data
in_report_parameter_id   IN   NUMBER,
in_site_id               IN   NUMBER,
in_start_date_time       IN   TIMESTAMP,
in_end_date_time         IN   TIMESTAMP,
in_report_level_min      IN   NUMBER,
in_report_level_max      IN   NUMBER
IS
BEGIN
DELETE FROM edr_cls_by_tawt_per_veh_data;
INSERT INTO edr_cls_by_tawt_per_veh_data
          site_id,
          site_lane_id,
          site_direction_id,
          site_direction_name,
          record_id,
          date_time,
          group_weight,
          vehicle_class,
          group_number,
          vehicle_status,
          vehicle_error_count,
          axle_violations_count,
          group_type
SELECT axle_info.site_id,
         axle_info.site_lane_id,
         axle_info.site_direction_id,
         axle_info.site_direction_name,
         axle_info.record_id,
         axle_info.datetime,
         axle_info.group_weight,
         axle_info.v_class,
         axle_info.group_number,
         NVL((SELECT SUM(status_code)
                FROM traffic_status
               WHERE traffic_status.record_id = axle_info.record_id), 0) vehicle_status,
         NVL((SELECT COUNT(error_code)
                FROM traffic_error
               WHERE traffic_error.record_id = axle_info.record_id), 0) vehicle_error_count,
         NVL((SELECT COUNT(1)
                FROM axle_weight_violation
               WHERE axle_weight_violation.record_id = axle_info.record_id), 0) axle_violations_count,
         axle_info.group_type
    FROM (SELECT site_to_data_source_lane_v.site_id,
                 site_to_data_source_lane_v.site_lane_id,
                 site_to_data_source_lane_v.site_direction_id,
                 site_to_data_source_lane_v.site_direction_name,
                 traffic_record.record_id,
                 traffic_record.datetime,
                 NVL(traffic_class.v_class, 0)   v_class,
                 NVL(axle_class.group_type, 0)   group_type,
                 NVL(axle_class.group_number, 0) group_number,
                 NVL(TRUNC(sum(convert_units(axle.weight_unit_id,
                                         c_kips_conversion_unit_id,
                                         axle.axle_weight
                       0
                     ) group_weight
           FROM traffic_record
           JOIN site_to_data_source_lane_v
             ON traffic_record.data_source_id = site_to_data_source_lane_v.data_source_id
            AND traffic_record.lane = site_to_data_source_lane_v.data_source_lane_id
       GROUP BY site_to_data_source_lane_v.site_id,
                 site_to_data_source_lane_v.site_lane_id,
                 site_to_data_source_lane_v.site_direction_id,
                 site_to_data_source_lane_v.site_direction_name,
                 traffic_record.record_id,
                 traffic_record.datetime,
                 traffic_class.v_class,
                 axle_class.group_type,
                 axle_class.group_number
        ) axle_info
END edr_class_by_tawt_get_veh_data;
PROCEDURE gen_class_by_axle_type
in_report_parameter_id   IN      report_tasks.report_task_id%TYPE,
report_data              OUT     SYS_REFCURSOR,
chart_data               OUT     SYS_REFCURSOR,
footer_data              OUT     SYS_REFCURSOR
AS
BEGIN
apply_default_awt_ranges(in_report_parameter_id);
my_date_format_mask   := edr_rpt_generic_package.edr_rpt_get_date_format_mask(in_report_parameter_id);
my_start_date_time    := edr_rpt_generic_package.edr_rpt_get_start_date_time(in_report_parameter_id, my_date_format_mask);
my_end_date_time      := edr_rpt_generic_package.edr_rpt_get_end_date_time(in_report_parameter_id, my_date_format_mask);
my_lane_grouping      := edr_rpt_generic_package.edr_rpt_get_lane_grouping(in_report_parameter_id);
my_site_id            := edr_rpt_generic_package.edr_rpt_get_site_id(in_report_parameter_id);
my_selected_data_type := edr_rpt_generic_package.edr_rpt_get_data_type(in_report_parameter_id);
-- ensure selected classes and lanes temp tables have been populated
edr_rpt_generic_package.edr_rpt_gen_tmp_lanes(in_report_parameter_id);
edr_rpt_generic_package.edr_rpt_gen_tmp_classes(in_report_parameter_id);
edr_rpt_generic_package.edr_rpt_gen_tmp_speed_ranges(in_report_parameter_id);
my_good_weight_statuses_mask   := edr_rpt_generic_package.get_good_weight_status_mask(in_report_parameter_id);
edr_rpt_generic_package.edr_rpt_gen_inclusion_table
    in_report_parameter_id,
    my_date_format_mask,
    my_start_date_time,
    my_end_date_time
edr_rpt_generic_package.edr_rpt_gen_grouping_table
    in_report_parameter_id,
    my_date_format_mask,
    my_start_date_time,
    my_end_date_time
edr_class_by_tawt_get_veh_data
    in_report_parameter_id,
    my_site_id,
    my_start_date_time,
    my_end_date_time,
    0,                          --Hardcoded until reclassification is supported.
    0                           --Hardcoded until reclassification is supported.
edr_class_by_tawt_data_type
    in_report_parameter_id,
    my_good_weight_statuses_mask,
    my_selected_data_type,
    my_used_data_type
edr_rpt_generic_package.gen_rpt_by_ranges_output_table
    in_report_parameter_id,
    'AXLE_GROUP',
    'AXLE_NAME'
COMMIT;
my_report_data_statement :=
      ' SELECT rank "Rank", '
    ||       ' row_type "Row Type", '
    ||       ' interval_start_date_time "Date", '
    ||       ' interval_start_date_time, '
    ||       ' range_label "Chart X-Axis", '
    ||       ' lane_id "Group Id" , '
    ||       ' ''None'' "Group Name", '
    ||       ' range_label "Speed (mph)" '
    ||         get_row_class_counts_text
    ||         get_row_totals_text
    ||       ' FROM edr_rpt_by_ranges_output '
    ||       ' ORDER BY lane_id, '
    ||                ' direction_id, '
    ||                ' interval_start_date_time, '
    ||                ' range_high, '
    ||                ' rank, '
    ||                ' range_low'
dbms_output.put_line('SQL start------------------------');
dbms_output.put_line(my_report_data_statement);
dbms_output.put_line('SQL end--------------------------');
my_chart_data_statement :=
       ' SELECT range_low "X Axis", '
    ||        ' lane_id "Group" '
    ||         get_row_class_counts_text
    || ' FROM '
    || ' ( '
    || ' SELECT lane_id, '
    ||        ' direction_id, '
    ||        ' range_low, '
    ||        ' range_high, '
    ||        ' min(interval_start_date_time) interval_start_date_time, '
    ||        ' max(interval_end_date_time) interval_end_date_time '
    || ' FROM edr_rpt_by_ranges_output '
    || ' WHERE rank = 1 '
    || ' GROUP BY lane_id, direction_id, range_low, range_high '
    || ' ) '
    || ' order by "Group", range_low '
dbms_output.put_line('SQL start------------------------');
dbms_output.put_line(my_chart_data_statement);
dbms_output.put_line('SQL end--------------------------');
SELECT my_used_data_type
    INTO my_data_type_used
    FROM SYS.DUAL;
SELECT NVL(COUNT(DISTINCT record_id), 0)
    INTO my_per_vehicle_total
    FROM edr_cls_by_tawt_per_veh_data;
SELECT NVL(COUNT(DISTINCT record_id), 0)
    INTO my_status_vehicle_total
    FROM edr_cls_by_tawt_per_veh_data
   WHERE vehicle_status > 0
     AND vehicle_error_count = 0;
SELECT NVL(COUNT(DISTINCT record_id), 0)
    INTO my_error_vehicle_total
    FROM edr_cls_by_tawt_per_veh_data
   WHERE vehicle_error_count > 0;
SELECT NVL(COUNT(DISTINCT record_id), 0)
    INTO my_status_clear_total
    FROM edr_cls_by_tawt_per_veh_data
   WHERE vehicle_status = 0
     AND vehicle_error_count = 0;
SELECT NVL(COUNT(1), 0)
    INTO my_binned_vehicle_total
    FROM edr_cls_by_tawt_per_veh_data;
SELECT NVL(COUNT(1), 0)
    INTO my_good_weight_total
    FROM edr_cls_by_tawt_per_veh_data
   WHERE vehicle_error_count = 0
     AND BITAND(vehicle_status, my_good_weight_statuses_mask) = 0;
-- insert vehicle totals into the temporary table
DELETE FROM edr_rpt_tmp_veh_totals_table;
INSERT INTO edr_rpt_tmp_veh_totals_table
SELECT my_data_type_used,
         my_per_vehicle_total,
         my_binned_vehicle_total,
         my_error_vehicle_total,
         my_status_vehicle_total,
         my_good_weight_total,
         my_status_clear_total
    FROM SYS.DUAL;
-- execute the query into the output refcursor
OPEN report_data FOR
    my_report_data_statement;
OPEN chart_data FOR
    my_chart_data_statement;
OPEN footer_data FOR
    SELECT data_type_used,
           per_vehicle_total,
           binned_vehicle_total,
           error_vehicle_total,
           status_vehicle_total,
           good_weight_total,
           status_clear_total
      FROM edr_rpt_tmp_veh_totals_table;
END gen_class_by_axle_type;
PROCEDURE edr_rpt_gen_class_by_sawt (
in_report_parameter_id   IN      report_tasks.report_task_id%TYPE,
report_data              OUT     SYS_REFCURSOR,
chart_data               OUT     SYS_REFCURSOR,
footer_data              OUT     SYS_REFCURSOR
AS
BEGIN
v_report_axle_group_type := c_axle_single_group_type;
gen_class_by_axle_type(in_report_parameter_id, report_data, chart_data, footer_data);
END;
PROCEDURE edr_rpt_gen_class_by_fawt (
in_report_parameter_id   IN      report_tasks.report_task_id%TYPE,
report_data              OUT     SYS_REFCURSOR,
chart_data               OUT     SYS_REFCURSOR,
footer_data              OUT     SYS_REFCURSOR
AS
BEGIN
v_report_axle_group_type := c_front_axle_only ;
gen_class_by_axle_type(in_report_parameter_id, report_data, chart_data, footer_data);
END;
PROCEDURE edr_rpt_gen_class_by_tawt (
in_report_parameter_id   IN      report_tasks.report_task_id%TYPE,
report_data              OUT     SYS_REFCURSOR,
chart_data               OUT     SYS_REFCURSOR,
footer_data              OUT     SYS_REFCURSOR
AS
BEGIN
v_report_axle_group_type := c_axle_tandem_group_type;
gen_class_by_axle_type(in_report_parameter_id, report_data, chart_data, footer_data);
END;
PROCEDURE edr_rpt_gen_class_by_triawt (
in_report_parameter_id   IN      report_tasks.report_task_id%TYPE,
report_data              OUT     SYS_REFCURSOR,
chart_data               OUT     SYS_REFCURSOR,
footer_data              OUT     SYS_REFCURSOR
AS
BEGIN
v_report_axle_group_type := c_axle_tridem_group_type;
gen_class_by_axle_type(in_report_parameter_id, report_data, chart_data, footer_data);
END;
PROCEDURE edr_rpt_gen_class_by_qawt (
in_report_parameter_id   IN      report_tasks.report_task_id%TYPE,
report_data              OUT     SYS_REFCURSOR,
chart_data               OUT     SYS_REFCURSOR,
footer_data              OUT     SYS_REFCURSOR
AS
BEGIN
v_report_axle_group_type := c_axle_quadrem_group_type;
gen_class_by_axle_type(in_report_parameter_id, report_data, chart_data, footer_data);
END;
END edr_rpt_class_by_tawt_package;
LIST
SHOW ERROR

Hi,
PLS-00304: cannot compile body of 'EDR_RPT_CLASS_BY_TAWT_PACKAGE'
without its specificationThis error usually indicates an issue with used datatypes in a package spec. that differs from a package body.
Check your spec:
FUNCTION class_count
in_lane_id                  edr_rpt_by_ranges_output.lane_id%TYPE,
in_direction_id             edr_rpt_by_ranges_output.direction_id%TYPE,
in_interval_start_date_time edr_rpt_by_ranges_output.interval_start_date_time%TYPE,
in_interval_end_date_time   edr_rpt_by_ranges_output.interval_start_date_time%TYPE,
in_axle_wt_min              edr_cls_by_tawt_report_data.group_weight%TYPE,
iin_axle_wt_max             edr_cls_by_tawt_report_data.group_weight%TYPE,
in_class_min                edr_cls_by_tawt_report_data.vehicle_class%TYPE,
in_class_max                edr_cls_by_tawt_report_data.vehicle_class%TYPE
RETURN VARCHAR2; However in your package body:
FUNCTION class_count
in_lane_id                  edr_rpt_by_ranges_output.lane_id%TYPE,
in_direction_id             edr_rpt_by_ranges_output.direction_id%TYPE,
in_interval_start_date_time edr_rpt_by_ranges_output.interval_start_date_time%TYPE,
in_interval_end_date_time   edr_rpt_by_ranges_output.interval_start_date_time%TYPE,
in_axle_wt_min              edr_cls_by_tawt_report_data.group_weight%TYPE,
in_axle_wt_max              edr_cls_by_tawt_report_data.group_weight%TYPE,
in_class_min                edr_cls_by_tawt_report_data.vehicle_class%TYPE,
in_class_max                edr_cls_by_tawt_report_data.vehicle_class%TYPE
RETURN NUMBERReturn number in spec. vs. return varchar2 in body..
That won't compile, either return a number or a varchar2 in both. (spec and body).

Cannot create PS file and PDF in Framemaker 9

I'm using Version 9.0p196.
When I used the "Advanced Save" to save an .fm file to a pdf, I got the message "The specified printer 'N/A' cannot be found, use printer 'Adobe PDF' instead. After I click OK, it said "cannot create PS file", and "failed to create PDF file.
It worked fine before.This problem was occurred after I copied some fonts to the following locations:
C:\Windows\Fonts
and
C:\Program Files\Adobe\FrameMaker9\fminit\fonts\adobe
Those fonts are:
timesbd.ttf
times.ttf
HelveticaWorld-Regular.ttf
HelveticaWorld-Italic.ttf
HelveticaWorld-BoldItalic.ttf
HelveticaWorld-Bold.ttf
I have no idea if that's the cause of the problem. Does anyone know?
By the way, the FM 9 is running on XP.
Thanks,
Meggie

Meggie,
You may or may not have created a mess with fonts. I would try not to have duplicate fonts, it is totally sufficient to have them in C:\Windows\Fonts.
But your FrameMaker verson is definitely four (4) patches behind. The current version is 9.0.4 (9.0p255) and you can get the updaters here:
http://www.adobe.com/support/downloads/product.jsp?product=22&platform=Windows
You have to install them one after another.
Some of the patches improved the Save as PDF feature.
For further communication, please add your OS version and Acrobat version.
- Michael

Cannot Compile. Pls. help!

I cannot compile the following program which calls for another 6 class files from its code. Please note the main program (DiveLog.java)+the other 6 class files are stored in the same directory.
And also as this involves "package" I tried to compile it as "javac -classpath DiveLog.jav". But I still get the 'cannot resolve symbol' error messages.
DiveLog.java (Main Program)
package DiveLog;
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
public class DiveLog
private JFrame dlframe; //Not assigned yet.
private JTabbedPane tabbedPane; //Not assigned yet.
//Begins Constructor
public DiveLog()
// Create a frame object to add the application GUI components to.
dlframe = new JFrame("A Java(TM) Technology Dive Log");
// Closes from title bar and from menu
dlframe.addWindowListener(new WindowAdapter()
public void windowClosing(WindowEvent e)
System.exit(0);
// Tabbed pane with panels for Jcomponents
// Instantiate JTabbedPane with keyword new
tabbedPane = new JTabbedPane(SwingConstants.LEFT);
// Calls method to set color
tabbedPane.setBackground(Color.blue);
tabbedPane.setForeground(Color.white);
populateTabbedPane();
//Calls the method that builds the menu
buildMenu();
dlframe.getContentPane().add(tabbedPane);
dlframe.pack();
dlframe.setSize(765, 690);
dlframe.setBackground(Color.white);
dlframe.setVisible(true);
}// Ends Constructor
private void populateTabbedPane()
// Create tabs with titles
tabbedPane.addTab("Welcome", null, new Welcome(), "Welcome to the Dive Log");
tabbedPane.addTab("Diver Data", null, new Diver(), "Click here to enter diver data");
tabbedPane.addTab("Log Dives", null, new Dives(),
"Click here to enter dives");
tabbedPane.addTab("Statistics", null, new Statistics(),
"Click here to calculate" + " dive statistics");
tabbedPane.addTab("Favorite Web Site", null, new Website(),
"Click here to see a web site");
tabbedPane.addTab("Resources", null, new Resources(),
"Click here to see a list of resources");
} //Ends populateTabbedPane method
// Method header
private void buildMenu()
// Instantiates JMenuBar, JMenu,
// and JMenuItem.
JMenuBar mb = new JMenuBar();
JMenu menu = new JMenu("File");
JMenuItem item = new JMenuItem("Exit");
//Closes the application from the Exit menu item.
item.addActionListener(new ActionListener()
public void actionPerformed(ActionEvent e)
System.exit(0);
} // Closes actionPerformed method
}); // Closes addActionListener method
//Adds the item to the menu object
menu.add(item);
//Adds the menu object with item onto the menu bar
mb.add(menu);
//Sets the menu bar in the frame
dlframe.setJMenuBar(mb);
} //Ends buildMenu method
public static void main(String[] args)
DiveLog dl = new DiveLog();
} //Ends Class
===========================================
Welcome.class (one of the 6 class files.The other 5 are identical to this.)
package divelog;
* This class creates the content on the
* Welcome tabbed pane in the Dive Log
* application.
* @version 1.0
//import for buttons, labels, and images
import javax.swing.*;
//import for layout manager
import java.awt.*;
public class Welcome extends JPanel
{ //Opens class
}//Closes class
=========================================================

Might be a typo when you posted, but your DiveLog class is in package DiveLog, whereas your Welcome class is in package divelog (note the capitalization differences).
And even though they're in the same package, i'm always a fan of importing all the files you're going to need explicitly, such as
import divelog.Welcome
this applies to using the wildcard character too (as in, you shouldn't) to import files. Explicitly listing all imports allows you, and any other developer, to quickly see a list of all classes used.

Cannot compile body of dbms_utility without its specification

hi there!
I just got this error on my 11g EE database
yesterday had power problems, and the backup batery did not work(but it happens very often)
today, trying to send email with a job, i realized through TOAD that sys has 304 invalid objects.
Try to compile and it seems something missing.
"cannot compile body of dbms_utility without its specification"
I cant find that specification and no forums found related to this.
need help from experts..
S.O. Oracle enterprise linux 4.7
D.B. Oracle Enterprise 11.2
thanks!

Virendra, thanks for your time, this is the output
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> ALTER PACKAGE SYS.DBMS_UTILITY COMPILE;
show errors
ALTER PACKAGE SYS.DBMS_UTILITY COMPILE BODY;
show errors
Warning: Package altered with compilation errors.
SQL> Errors for PACKAGE SYS.DBMS_UTILITY:
LINE/COL ERROR
262/75     PLS-00103: Encountered the symbol "end-of-file" when expecting
     one of the following:
     end function pragma procedure subtype type <an identifier>
     <a double-quoted delimited-identifier> current cursor delete
     exists prior
SQL>
Warning: Package Body altered with compilation errors.
SQL>

PLS-00304: cannot compile body of 'PA_TIME_CLIENT_EXTN' without its specifi

Hi expert,
We are trying the validate the PA_TIME_CLIENT_EXTN package body. It is giving the below error.
0/0 PL/SQL: Compilation unit analysis terminated
1/14 PLS-00905: object APPS.PA_TIME_CLIENT_EXTN is invalid
1/14 PLS-00304: cannot compile body of 'PA_TIME_CLIENT_EXTN' without
its specification
My environment details are as below.
Oracle apps version: 11.5.10.2
DB version : 11.2.0.1
OS version : IBM AIX 6.1
Please help me on this.
Thanks

This error is usually seen when you have a different datatype specification in your package specification and your package body. I think that is some thing you might want to check first.
Regards,
Johan Louwers

Compiling for Windows and Java

Hi All
This is a deff newbie question. Basically i have a program that will compile in Windows, but if I try and compile it in Linux (CentOS) then I get 48 errors all related to graphics of constructors.
It was my understanding that Java was meant to be platform independent, or is that just a myth?
Is there any way that i can resolve this, or find a tool that will show me what wont compile under linux and why?

I have a
program that will compile in Windows, but if I try
and compile it in Linux (CentOS) then I get 48 errors
all related to graphics of constructors. Difficult to say without the actual compiler messages.
You may be missing some jar(s) in your classpath.

I cannot compile anything

I have a problem with my setup. My labview project has been running perfectly till today, when I cannot compile any project. My project works perfectly in another computer. Same with "simpler" projects that I have. I cannot compile. I have tried to compile an empty vi, but the problem is the same.
I decided to remove all labview components from my host computer. I removed everything from the host (NI-MAX/my-computer/sofware, all programs selected) and reinstalled Labview 2013. After doing that, the problem still happens. Attached you have a picture where you can check which error appears. It even happens with empty fpga VI.
I am running Labview 2013 in an Windows 7 64bit. Xilinx 14.4 13.0.0
My software package worked perfectly till today. Maybe something got corrupted...
Any suggestion? Thanks in advance
Pablo
Attachments:
Labview error before compilation.png ‏24 KB

You've re-installed NI things. Butm did you try re-installing the compiler as that sounds like the source of your problems?
For future reference, you should bring up FPGA in the subject, in the first sentence, or pretty much anywhere other than the end of your post. It helps others understand your issue to know what we are looking at from the start.

Error when Compiling package header and body - how change pkb file associat

Hi everyone,
it has already been noticed elsewhere (in the thread "Compiling package header and body" of Jan 12, 2010) that the compilation of package scripts sometimes fails (apparently because of a sqldeveloper bug) when the script contains the terminating slash /.
Is this bug still open?
Next question: In the above mentioned thread it is recommended as workaround to change the corresponding file type association from pl/sql to sql. I would like to do that; I know the place in the preferences dialog, but most of the associations there seem to be hard coded and cannot be changed.
I would appreciate any ideas!
Thanks in advance,
user8632123.

For the workaround: you'd have to change the file's extension, not the association (to e.g. .sql).
Have fun,
K.

Cannot compile on win98 and win2k platforms

Similar Messages

Maybe you are looking for