Cannot complete album

This is the first time I have experience this problem.
On the itunes store there is a link to "Complete My Album" and I can see all the offers available to me. However when I click on one of them and it takes me through to the album tracklisting my previously purchased items are not grayed out stating they are previosly pruchased and the album shows at full price.
When I click buy album it warns me that I have already purchased songs from the album and asks me to click either complete my album or to purchase the full album.
When I click complete my album it returns to the tracklisting but again nothing is grayed out and I am back at square one.

I am having the EXACT SAME THING happen to me - none of the albums I'm eligible to complete show the reduced price when I click on the "Complete my album for $x.xx," and when I actually try to buy and complete the album I'm trying to buy (Adele's 21, if that helps) I get the EXACT SAME RESULTS as described above.
Ianfrompreston, if you get it to work or figure out what's going on, please let me know!!

Similar Messages

I wanna buy the new album, It says you cannot complete the album.

I had pre-ordered an album and I got two singles. But then I canceled it. The Apple ID that i used is no longer verified in my old Yahoo account which I don't remember security answer so i can't open it. So I make a new account, I deleted the songs I got to my pre-ordered before. So I wanna buy a whole of that album in my new Apple ID, but it says "you cannot complete the album" Please help. I want the album.

nvm, try restarting iTunes and and try again, see what happens.

"the finder cannot complete the operation because some data in [name of iMovie file] could not be read or written (Error Code 26)

Hi all,
I have an iMovie project in iMovie HD 6.0.3. (Mac OS 10.5.8)
It plays, but I cannot copy the file (including saving it to a flash drive). I get either a message
"the finder cannot complete the operation because some data in [name of
iMovie file] could not be read or written (Error Code 26)" or the
message "A project file is missing. The file [name of the QuickTime
movie inside the project.dv] couldn't be opened and is being skipped."
This happened suddenly, I was able to save a backup version numerous
times while working on the project.
I followed some of Karl Petersen's advise on apple discussions. I opened
the package contents, and everything seems to be there. The source file
(original QuickTime movie) is there and can be opened and played. I
replaced the current project file with the backup in the package
contents, but that did not change anything. I was able to export the
movie timeline into a new project as a single clip, but would like to be
able to copy the current project.
Thanks for any ideas..

Make sure all drives are formatted as "Mac OS Extended". (Journalling preferred, but not necessary).

How to I get iTunes to merge partial albums into a complete album?

When I've brought a single before the album was out the album then lists all the tracks but not the single(s) already in itunes.
For example I have all tracks but track 3 is missing and displayed and played as a single and its missing if i play just the album.
Real example: I have Muse's album Black Holes and Relevations, brought Supermassive Black Hole before the Album. Now I have Black Holes as a single and tracks 1,2 4-11 but no track 3. So when I play the album either in iTunes or any of my apple devices it doesnt have a complete album.
I have a few of these uncomplete albums, it is very annoying!
Any ideas what i can do?
I have been to the iTunes store online and it already says i have purchased the missing track so it recognises that I have brought it but won't put it in its right place!
Thanks!

The song is tagged differently.
Right-click (CTRL-click) the single > Get Info > Info and make sure the fields are the same as the fields for the songs in the album except for the name and track number.

Currently Have Photoshop CS3 & Adobe Bridge CS3 2.1.1.9. According to Adobe, Camera Raw 4.6 supports Nikon D810 NEF files. I have downloaded Camera Raw 4.6 Update. When I try to open Nikon D810 NEF files, I get photoshop error that says "cannot complete

Currently Have Photoshop CS3 & Adobe Bridge CS3 2.1.1.9.
According to Adobe, Camera Raw 4.6 supports Nikon D810 NEF files. I have downloaded Camera Raw 4.6 Update. When
I try to open Nikon D810 NEF files, I get photoshop error that says
"cannot complete request your because it is not the right kind of
document. These NEF files wont open in Bridge at all. What am I doing wrong?

Camera Raw plug-in | Supported cameras

I saved my Form Central spreadsheet file once as a excel file but it will not allow me to save it a second time as an excel file. It says that I cannot complete this action because the file me be open in another application, but it is not open in another

I saved my Form Central spreadsheet file once as a excel file but Forms Central will not allow me to save the file a second time as an excel file. I am informed that I cannot complete this action because the file me be open in another application, but it is not open in another application. What is the problem, and how do I solve the problem. Thank you. Jeff

First check the version of the document with Jongware's script "Identify.jsx" (ExtendScript/JavaScript).
You can find it here:
[Ann] Identify Your InDesign File
If it is CS 5.5 or above, you need someone to open it in the version the script says and export an IDML representation from that. Another way would be to install a 30days version of CS6 or above (CC) and do it yourself.
In regards of the script showing a result for InDesign files higher than CS6:
CS7 = CC v9
CS8 = CC v10 = CC-2014 or CC2014.1
Uwe

ITunes 7 cannot browse album covers on this computer error and crash

Installed iTunes 7 yesterday, and now every time I try to go to certain pages in the iTunes store, such as movies or tv shows, I get an error saying "iTunes cannot browse album covers on this computer". Then iTunes immediately crashes. Has anyone else had this problem? Any fix??
Compaq Windows XP

I have the same issue. Not sure if this has anything to do with it, but I was on the Cover Flow View and it was working fine. I clicked on the full screen icon and the entire screen went random (meaning totally random pixels of color all over). I pressed the escape key and the normal screen returned, but it only showed a black section where the covers had previously been. I restarted iTunes and it started giving me the same message. I also can see them in the lower left and on the Album View. Just the Cover Flow view doesn't work. I downloaded the latest iTunes today and I keep all of the Windows updates on.

Why does my music from one album show up as two separate albums: one with all the songs in it, and another with two or three. Why is it that when i delete the incomplete album it takes the same songs out of the complete album also?

When I first imported music from my CDs onto my iTunes library, all the songs appeared, but those with the album artist and guest/additional artists they appeared in their own album under the same album name. After searching through iTunes help and support, I learned how to put all the songs under the same album (part of a compalition) and add the additional songs information, artwork, lyrics, etc. After getting all the music (imported from my CDs) onto the iTunes library and in their album. I synced my music onto my iPhone. (My iPhone is a 3GS)
Once the music was on my iPhone i noticed that the albums appeared in 2s again. One was the complete album with all the songs, song info, etc. together (solo tracks and/or one with multiple artists) and another album of the same name, artwork, etc. with 2-4 of the songs from that album. Since all I saw need for was to have the completed album on my iPhone, I deleted the album with only 2-4 of the songs. When I went back and selected the completed album, all the songs I had deleted from the incomplete album were also deleted from the completed album too! I just couldn't figure out why it did that and my my friends with iPods and iPhones said they didn't know what caused it either. So now I'm here with the idea how to fix this problem.
If anyone has a solution to this problem, please reply. It will be greatly appreciated.

I'm not sure why this happens, but I found a workaround. Below the album title it will list the artist(s). The issue seems to happen when there are multiple artists. For example, an Album titled "Over the Sea to Skye" has The Chieftains and James Galway as artists. Some tracks (for whatever reason) will list only one of these and result in the playlist showing what appears to be multiple albums. You can click on the artists and it will highlight. Paste in what is appearing on the other "albums" and it will then show as one:
Hope that is somewhat clear enough to help. Doesn't fix whatever the issue is but it is a workaround. For me this is only happening with CD's that I have imported.

I am using a 2003 eMac and am running on Mac OSX vs 10.4.11. iTunes is not recognizing music I have purchased and when I try to connect when it request me to I get the following error message: Cannot complete i Tunes Store request. A required iTunes com

I am using a 2003 eMac and am running on Mac OSX vs 10.4.11. I amrunning iTunes 8.2.1 (6) and not able to upgrade iTunes on this computer. iTunes is not recognizing music I have purchased and when I try to connect when it request me to I get the following error message:
Cannot complete iTunes Store request. A required iTunes component is not installed (-42404)
Please help.

Is this music purchased back in DRM days? I don't actually have any iTunes music so I can't test with my iTunes 7.5, but I know that without iTunes 10 you cannot even connect to the store anymore. I wouldn't think that would require an active connection to the store all the time, otherwise how could you play music on a computer in the middle of nowhere? Did you do something to trigger iTunes suddenly wanting to connect and check on machine authorization?

Cannot move any files into trash to delete them. I get a Trash warning box saying "The Finder cannot complete the operation because some data in 'file name' could not be read or written.(Error code - 36)".Macbook has so much data it is almost not working

Cannot move any files into trash to delete them. I get a Trash warning box saying "The Finder cannot complete the operation because some data in 'file name' could not be read or written.(Error code - 36)".Macbook has so much data it is almost not working.
I have tried reseting to factory settings by removing battery and holding down the power switch for more than 5 sec but this does nothing.
Any ideas would be greatly appreciated as I think with so much unwanted data on the desktop and other places the whole os will crash very soon.
Thanks, Rick

The hard drive may be dying anyway, or the directory damaged because it is so full. You should never let the hard drive get over 85% full.
A -36 error is a read/write error.
All you did with the power is reset the SMC. Does nothing to reset everything to factory settings.
Do you have your original 10.4 installer discs for the MacBook?
Is your data backed up?

RE: Downloading and updating apps. I log in correctly and agree as required; but immediately I am timed out and cannot complete the update or download. Checked on my PC, my password is correct.

Re: Downloading and updating apps. I log in correctly and agree as required. But before a download happens i get a message "session timed out" and I cannot complete the download. This happens in a matter of seconds. Anyone?

Have you checked to see if you credit card is out of date? You may need to update your credit card on file.......

I cannot sign into App Store. "unknown error" and then "We cannot complete your request. There has been an error in the App Store. Please try again later. (4)"

I cannot sign in to the App Store.
I changed countries a few months ago and updated all my account info and everything was working fine, until recently, while trying to upgrade my softwear to Mavericks, which I cannot do. My apple Username and password work fine on iTunes and on my iPhone. I can also access all my account info when I sign in through the website. It just will not work for the App Store on my Mac Pro.
When I click "Welcome" under Quick Links it asks me to sign in. I sign in with my Apple Username and Password and then it DOES NOTHING
When I click on "Free Upgrade" and then "Install" on the mavericks software, it asks me to sign in again. This time it says "unknown error" and then it says "We cannot complete your request. There has been an error in the App Store. Please try again later. (4)"
I''m completely blocked. I cannot procede without being able to update my software.
Please help me.
Rhea

You could try this.
Back up all data.Triple-click anywhere in the line below on this page to select it:
/Library/Preferences/SystemConfiguration/NetworkInterfaces.plist
Right-click or control-click the line and select
Services ▹ Reveal
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Reboot and test. If there's no change, restore the item you deleted from a backup, overwriting the one that may have been created in its place. Otherwise, you may need to recreate some of your settings in the Network preference pane.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
Credit for this solution to ASC member luis.pinhor.

I recently changed my apple ID but my previous apple ID is associated with my icloud account. I'm setting up my new iphone 6 and cannot complete the set up until I can sync my icloud account. Does anyone know how to change the icloud id?

I recently changed my apple ID but my previous apple ID is associated with my icloud account. I'm setting up my new iphone 6 and cannot complete the set up until I can sync my icloud account. Does anyone know how to change the icloud id?

Do the following:
Make sure you are signed into iMessage and FaceTime with your current ID. If they are signed into the old ID, go to Settings>Messages>Send & Receive and Settings>FaceTime, tap the ID, sign out, then sign back in with your current ID.
Then temporarily recreate the old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. (You should not have to verify the old email account so it doesn’t matter if you no longer have access to it.) Now go to Settings>iCloud, turn off Find My iPhone and enter your current password when prompted (even though it prompts you for the password for your old ID). Then go to Settings>iCloud, tap Sign Out and choose Delete from My iPhone when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address back to the way it was. Now you can go to Settings>iCloud and sign back in with your current iCloud ID and password (your data will download back to your phone).

How to show only complete albums in Albums view NOT singles?

I will try to explain this sa simple as I can:
- In albums view I ONLY want my completed albums listed.
- I tried to rename the album title of all my singles or songs with incomplete albums as "singles/incomplete albums" but they are still listed individually by artists under albums. So instead of one album names "singles.." there are hundreds with that name, just as before, one big hodgepodge of albums.
- I just want all my full albums (500 or so) listed nice and neat NOT like 2000 albums listed.
- To have my albums nice and sorted I have always had to make an individual playlist for eah album, under a folder called "albums". I figured by iTunes 11 I would be able to have only my full albums listed in one place AND be able to use the new slick looking interface.
Thanks!

- I tried to rename the album title of all my singles or songs with incomplete albums as "singles/incomplete albums"
Then you have already done the hard part. Now, just make a smart playlist with the rule "Album" "does not contain" "incomplete". Go into that smart playlist and switch to Album view.

Excel 2010 cannot complete this task... Error in a shared spreeadsheet

The layout
A server in an office connects 5 computers running windows 7 and using MS office plus 2010(32bit) and 1 computer running XP using MS office plus 2007(32bit), they are all 64bit OS's besides xp. They share many spreadsheets that are opened, edited and updated
simultaneously off the server. Since the spreadsheets need to be referred to each other, 2 up to 5 excel files must be opened on the computer I'm working on.
I'm working with a computer that has the following error during reading and writing to spreadsheets.
"Excel cannot complete this task with available resources choose less data or close Other applications"
This error occurs simply because excel has used up all the resources. However I'd like to avoid the simple "close redundant spreadsheets" because sooner or later they will need to be used.
The problem is that its only one computer that is having this problem all other computers don't get this error despite having equal amount of spreadsheets opened as the problematic computer. We've upgraded the ram and graphics card on that computer yet problem
persists. I'm aware of the 2gb ram access restriction office 32bit has.
The only solution I can think of would be to install a 64 it version of office on this computer set the default program that opens the file to the 64bit excel version (only for the problematic computer). Will cause errors? Seeing as other computers run 32bit
office?
Does anyone know of any other ways of doing this? When the error occurs the file is locked and all data that is entered into the file after that is lost. Thanks in advanced

Hi,
Do these five pcs have the same hardware?
As far as I know, the above memory error messages can be very generic and don't always identify the real cause of the issue. Please follow the KBs below, try the methods and check if they are helpful.
http://support.microsoft.com/kb/2779852
http://support.microsoft.com/kb/2655178
Then, I agree with you, we can update the Excel to 64bit version. Because the max RAM usage of the Excel 2010 32bit version is 2 GB. Even if we add more physical memory, 32bit version won’t be able to use it. I recommend you use Excel 64bit
version to open/edit the large workbook instead. The 64-bit version of Excel 2010 is not constrained to 2 GB of RAM usage like 32-bit applications does.
Hope it's helpful.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Cannot complete album

Similar Messages

Maybe you are looking for