Cannot Complete Operation

Hello Everybody!  We have 2 users currently using RH7.   Recently, we needed to add another new user and installed RH8.  Now we're getting an error message on the new user when trying to connect to SourceControl.
"The files in the list below could not be checked out from version control. Exclusive access to these files is required to Upgrade a project created by previous version."
Would this issue be related because the other users are still on RH7?  The new user (RH8) is unable to open the project and not sure what's the next best step...
Thanks in advance for your help!

You cannot have different versions working on the same project. RH8 is very different from RH7 code.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Similar Messages

  • I am now using 10.6.8.  Downloaded Maverick but cannot update OS on HD because get message the disk is not formatted as Mac OS extended(journaled).  Tried to use Disk Utility as per instruction but cannot complete operation.

    I am now using 10.6.8.  Downloaded Maverick but cannot update OS on HD because get message the disk is not formatted as Mac OS extended(journaled).  Tried to use Disk Utility as per instruction but cannot complete operation.

    Barney-15E:
                   The partition method worked after some trepidation.  I got the spinning beach ball after partitioning and couldn't go further till I named the second partition.  That may have done it.  Right now, things seem to be working o.k.  I'm updating a current iPhoto and will have to get a MS Word program that will function on the current OS and a current  Quicken.
    If necessary, can start up from the 10.6.8 system which I downloaded to an external HD before updating.  I can always fall back on that.  Also, I hope I don't get too many disconnects.  Thank you for your help.

  • Cannot complete operation (update) because you do not have sufficient privileges for some items

    updating to 3.6.6, get message "cannot complete operation because you do not have sufficient privilege for some items". Running the new second version, works fine, but slow, the old version not updating

    See http://kb.mozillazine.org/Installing_Firefox#Mac_OS_X
    Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
    Trash the current Firefox application to do a clean reinstall.
    Install the new version that you have downloaded.
    Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

  • Finder Cannot Complete Operation While Trying to Trash Files

    When I try to trash files, I receive the following error message, "The Finder cannot complete the operation because some data in (file name trying to trash) could not be read or written. (Error Code - 36)."
    Any help appreciated - Thanks

    Hi oneltwots, and a warm welcome to the forums!
    Well, in pure Apple File System talk... -36 ioErr I/O error (bummers)
    Not very helpful, but generally means a Drive quit being Readable or Writable since starting the operation...
    http://fuzzy.wordpress.com/2006/12/10/ioerror-36/

  • Nokia Music error: can't complete operation

    i am from bhutan and i bought nokia lumia 720 and i wanted to download songs from nokia music but cannot complete operation it says,eventhough i have created nokia account. That is fine and i went for another option that is to google looking for downloading software,even from this also not possible, anyone can help please?
    Moderator's note: We provided a topic-related subject to the post as it was moved to the appropriate board.  

    Hi, sean1988.
    Welcome to Nokia Support Discussions Forum!
    For what model of phone is this? What is the connection being used by the phone when you tried downloading these mixes?

  • "the finder cannot complete the operation because some data in [name of iMovie file] could not be read or written (Error Code 26)

    Hi all,
    I have an iMovie project in iMovie HD 6.0.3. (Mac OS 10.5.8)
    It plays, but I cannot copy the file (including saving it to a flash drive). I get either a message
    "the finder cannot complete the operation because some data in [name of
    iMovie file] could not be read or written (Error Code 26)" or the
    message "A project file is missing. The file [name of the QuickTime
    movie inside the project.dv] couldn't be opened and is being skipped."
    This happened suddenly, I was able to save a backup version numerous
    times while working on the project.
    I followed some of Karl Petersen's advise on apple discussions. I opened
    the package contents, and everything seems to be there. The source file
    (original QuickTime movie) is there and can be opened and played. I
    replaced the current project file with the backup in the package
    contents, but that did not change anything. I was able to export the
    movie timeline into a new project as a single clip, but would like to be
    able to copy the current project.
    Thanks for any ideas..

    Make sure all drives are formatted as "Mac OS Extended". (Journalling preferred, but not necessary).

  • Cannot move any files into trash to delete them. I get a Trash warning box saying "The Finder cannot complete the operation because some data in 'file name' could not be read or written.(Error code - 36)".Macbook has so much data it is almost not working

    Cannot move any files into trash to delete them. I get a Trash warning box saying "The Finder cannot complete the operation because some data in 'file name' could not be read or written.(Error code - 36)".Macbook has so much data it is almost not working.
    I have tried reseting to factory settings by removing battery and holding down the power switch for more than 5 sec but this does nothing.
    Any ideas would be greatly appreciated as I think with so much unwanted data on the desktop and other places the whole os will crash very soon.
    Thanks, Rick

    The hard drive may be dying anyway, or the directory damaged because it is so full.  You should never let the hard drive get over 85% full.
    A -36 error is a read/write error.
    All you did with the power is reset the SMC.  Does nothing to reset everything to factory settings. 
    Do you have your original 10.4 installer discs for the MacBook?
    Is your data backed up?

  • The operation cannot complete because of an unkown error while exporting to png

    Adobe Illustrator CS5
    Windows 7 64bit
    I am getting the following error while trying to export a png
    "The operation cannot complete because of an unkown error. [13]"
    I tried disabling all startup items, rebooting, copying and pasting to a new document to no avail.
    Please help

    Here is what I tried and it worked
    Save the file as pdf with the "Preserve Illustrator Editing capabilities" checked.  Rename the file from .pdf to .ai
    New file can now export without any problems.
    Wierd.  But thanks to everyone who posted

  • Finder cannot complete the operation... (Error code -36)

    Hello,
    I'm trying to share a file between my new iMac and my PowerBook via file sharing (Finder, Airport 802.11 n). Both computers are on 10.5.3. The iMac is a brand new one, so it's a fresh install. The PowerBook has a new harddrive and is a fresh install as well. Both are on the most current software.
    Here's what happens: Both computers are visible in each respective Finder, but files can only be shared from the iMac towards the PowerBook, not vice versa. When trying to connect from the PowerBook to the iMac, it tries to connect but to no avail, then I receive an error message "Connection Failed".
    Next thing I tried was to connect via Finder/Connect to Server and typing in the afp:// address (looked it up at System Preferences/Sharing/File Sharing). It again tries to connect, then I receive the error message: "The finder cannot complete the operation because some data in "afp://192.xxx.x.xxx" could not be read or written (Error code -36)".
    Now I'm puzzled and don't know what to do. Any help would be much appreciated, thanks.
    Message was edited by: Thomas Thomaser1
    Message was edited by: Thomas Thomaser1
    Message was edited by: Thomas Thomaser1

    Where can I find AFP I/O errors?
    And by the way - after trying this for two days, it JUST worked! Not sure why or how or for how long, but this seems like massive bully.

  • Finder cannot complete the operation because some data in.....

    Hello everyone.
    I burned about 10 TDK DVDr's about a month ago. I didn't get any errors while burning them and put them directly into cd cases to prevent them from getting scratches or marks. I just took them out to copy the files back to my Macbook. As soon as i start to drag and drop the files, the dvd player starts reading the files, copies some of them, and about 20 seconds in to the copy it powers down and displays the following message. This is true for all 10 of the dvds i burned. It copies to my hard drive for about half a minute...and then the drive powers down.
    "Finder cannot complete the operation because some data in (NAME OF CD) could not be read or written (Error Code-36)."
    Does anybody have any suggestions? I'd hate to think that all of the dvds are coasters now because i have data on them.

    hi easeupjosh,
    did you ever get help with your DVD-Rs?
    I am having the same problem and was wondering if there's someway I can salvage the data on my DVDs?
    thanks

  • External HD issue. Finder cannot complete the operation because some data..

    Last night I had a drive throw the error "finder cannot complete the operation because some data in "<file>" could not be read or written. Error code-36". I thought it was a bad disk. Then tonight I plugged in a flash drive, formatted it on the machine and now I am getting the same error on that disk as well. Any thoughts???

    Yes, you can have bad blocks or other physical damage on a usb drive, the same as a firewire, or eSATA. Just because you can reformat the drive, doesn't mean the drive is okay. You reformat, yet the problem recurs. That is a sign of a bad drive. If it were an OS issue then the reformat should fix it.
    You might want to check the drives with a utility from Prosoft called DriveGenius It's the "Swiss Army Knife" of utilities, including the ability to repartition "on the fly" (A little scary for my tastes). But Prosoft is a trusted software manufacturer. Downloaded the trial (it has more bells & whistles than you can believe) But the trial will run all hardware tests without the repair feature, and give you a report.
    Also, you can download and use Applejack for repair.
    -mj

  • WinRM cannot complete the operation. Verify that the specified computer name is valid, that the computer is accessible over the network

    The Exchange Management Shell fails to connect in Exchange 2013 environment, this is a DAG environment and previously it indicates another error message, which is in my another thread. We fixed that error by delete the retired proxy entry in the server registry,
    after that the error is gone but changed to below one, anyway the EMS still fails to connect to all servers:
    VERBOSE: Connecting to NSWVIP999WTMBX.air.abc.au.
    New-PSSession : [NSWVIP999WTMBX.air.abc.au] Connecting to remote server NSWVIP999WTMBX.air.abc.au failed with the
    following error message : WinRM cannot complete the operation. Verify that the specified computer name is valid, that
    the computer is accessible over the network, and that a firewall exception for the WinRM service is enabled and allows
    access from this computer. By default, the WinRM firewall exception for public profiles limits access to remote
    computers within the same local subnet. For more information, see the about_Remote_Troubleshooting Help topic.
    At line:1 char:1
    + New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
       gTransportException
        + FullyQualifiedErrorId : WinRMOperationTimeout,PSSessionOpenFailed
    Failed to connect to an Exchange server in the current site.
    Enter the server FQDN where you want to connect.:
    Then it just show can't connect to all the exchange servers, from the wording it seems pointing to the Windows firewall settings for winRM, but when I look at the windows firewall found it's turned off. We use Sophos enterprise for the security, but all
    other 3 exchange servers didn't have the same issue.

    Hi Lynn,
    Thanks for your analyst and reply, I run the command as you suggested and checked accordingly to Task Manager, but seems none of them indicates a firewall or anti-virus.
      TCP    0.0.0.0:80             0.0.0.0:0              LISTENING       4
     TCP    0.0.0.0:808            0.0.0.0:0              LISTENING       2260
     TCP    172.17.2.123:444       172.16.2.127:8050      ESTABLISHED     4
     TCP    172.17.2.123:444       172.16.2.127:8069      ESTABLISHED     4
     TCP    172.17.2.123:444       172.17.2.127:8053      ESTABLISHED     4
     TCP    172.17.2.123:10952     172.16.2.68:80         ESTABLISHED     3296
     TCP    172.17.2.123:11185     172.16.2.90:8080       SYN_SENT        468
     TCP    172.17.2.123:11190     172.16.2.90:8080       SYN_SENT        15268
     TCP    172.17.2.123:11330     172.16.2.90:8080       SYN_SENT        1296
     TCP    [::]:80                [::]:0                 LISTENING      
    4
     TCP    [::]:808               [::]:0                 LISTENING      
    2260
     TCP    [::1]:6001             [::1]:8028             ESTABLISHED     4764
     TCP    [::1]:6001             [::1]:8029             ESTABLISHED     4764
     TCP    [::1]:6001             [::1]:8030             ESTABLISHED     4764
     TCP    [::1]:6001             [::1]:8031             ESTABLISHED     4764
     TCP    [::1]:6001             [::1]:8032             ESTABLISHED     4764
     TCP    [::1]:6001             [::1]:8033             ESTABLISHED     4764
     TCP    [::1]:6001             [::1]:8034             ESTABLISHED     4764
     TCP    [::1]:6001             [::1]:8035             ESTABLISHED     4764
     TCP    [::1]:6001             [::1]:8036             ESTABLISHED     4764
     TCP    [::1]:6001             [::1]:8037             ESTABLISHED     4764
     TCP    [::1]:6001             [::1]:8040             ESTABLISHED     4764
     TCP    [::1]:6001             [::1]:8041             ESTABLISHED     4764
     TCP    [::1]:6001             [::1]:8048             ESTABLISHED     4764
     TCP    [::1]:6001             [::1]:8049             ESTABLISHED     4764
     TCP    [::1]:6001             [::1]:8059             ESTABLISHED     4764
     TCP    [::1]:6001             [::1]:8060             ESTABLISHED     4764
     TCP    [::1]:8028             [::1]:6001             ESTABLISHED     9980
     TCP    [::1]:8029             [::1]:6001             ESTABLISHED     9980
     TCP    [::1]:8030             [::1]:6001             ESTABLISHED     9980
     TCP    [::1]:8031             [::1]:6001             ESTABLISHED     9980
     TCP    [::1]:8032             [::1]:6001             ESTABLISHED     9980
     TCP    [::1]:8033             [::1]:6001             ESTABLISHED     9980
     TCP    [::1]:8034             [::1]:6001             ESTABLISHED     9980
     TCP    [::1]:8035             [::1]:6001             ESTABLISHED     9980
     TCP    [::1]:8036             [::1]:6001             ESTABLISHED     9980
     TCP    [::1]:8037             [::1]:6001             ESTABLISHED     9980
     TCP    [::1]:8040             [::1]:6001             ESTABLISHED     9980
     TCP    [::1]:8041             [::1]:6001             ESTABLISHED     9980
     TCP    [::1]:8048             [::1]:6001             ESTABLISHED     9980
     TCP    [::1]:8049             [::1]:6001             ESTABLISHED     9980
     TCP    [::1]:8059             [::1]:6001             ESTABLISHED     9980
     TCP    [::1]:8060             [::1]:6001             ESTABLISHED     9980
     TCP    [fe80::9054:e8f5:f885:8105%20]:808  [fe80::9054:e8f5:f885:8105%20]:9901
     ESTABLISHED     2260
     TCP    [fe80::9054:e8f5:f885:8105%20]:9901  [fe80::9054:e8f5:f885:8105%20]:808
     ESTABLISHED     4868
    This is the full result, among them
    4 -- System -- NT Kernel & System
    468 -- There is no process associated with PID 468
    1296 -- svchost.exe -- Host Process for Windows Service
    2260 -- SMSvcHost.exe -- SMSvcHost.exe
    3296 -- CcmExec.exe -- CCM Executive
    4764 -- Microsoft.Exchange.RpcClientAccess.Service.exe -- Microsoft.Exchange.RpcClientAccess.Service.exe
    4868 -- Microsoft.Exchange.ServiceHost.exe -- Microsoft.Exchange.ServiceHost.exe
    9980 -- w3wp.exe -- IIS Worker Process
    15268 -- ServerManager.exe -- Server Manager

  • The operation cannot complete because there isn't enough memory (RAM) available

    Illustrator CS5 Verison 15.1 on a MacBook Pro Retina, 15-inch, Early 2013 Processor  2.7 GHz Intel Core i7, Memory  16 GB 1600 MHz DDR3,
    Graphics  NVIDIA GeForce GT 650M 1024 MB. Illustrator opens .ai and .pdf files. When I try to open a .dwg file, I get the following message, “The operation cannot complete because there isn’t enough memory (RAM) available”. I have been using the program for some time to successfully open .dwg files. This is a recent occurrence and I have not made any changes to the hard drive other than installing OS 10.9

    Have you already opened that specific file at some former time?
    Have you already tried a restart?
    Apart from that:
    Illustrator CS5 cannot use more than 3 GB of RAM, no matter how much is installed. OS 10.9 causes all kinds of problem even with newer versions of Illustrator.

  • "The operations cannot complete because of an error" DFER

    I frequently use preview to view exports of images from Adobe Illustrator on my Retina MBP. Typically I export an image, then I view it in Preview. After viewing, I make changes then re-export while the file is still open in Preview. It usually works fine and when I change the focus to the preview window the view is updated to the latest export, very slick. The issue is that after a few exports over minutes or even hours I eventually get this message: "The operations cannot complete because of an error" DFER
    It appears to be a file sharing issue caused by the Preview app making it so Illustrator can't overwrite the file anymore.
    My question is, why does this process work fine the first few times only to stop and require me to quit Preview before I can export again?? Just closing the open Preview window doesn't fix the issue, I have to fully quit Preview to be able to export from Illustrator.
    Is there a work around that will let me continue viewing the same file in Preview no matter how many times I overwrite it using Illustrator?

    I have the same error TADD with illustrator CS5/Win7. Removing AIprefs or Font-cache doesn't seem to help.
    in my folder C:\Program Files (x86)\Adobe\Adobe Illustrator CS5 there is a shortcut to
    C:\Program Files (x86)\Adobe\Adobe Illustrator CS5\Support Files\Contents\Windows\Illustrator.exe
    but I don't think i'm supposed to start moving the program around..
    Has smbdy found a solution yet to this problem??

  • "The Operation cannot complete because of an Unkown error. [CANF]"

    Ill CS3, new install, 13.0.2, was working perfectly Thursday. Closed my Mac (MacBook Pro, Intel) Opened on Friday, get this error. Anyone have any ideas?

    I had the same experience. No updates or changes, just an error out of nowhere. It doesn't seem to affect the performance of Illustrator. Just a couple of annoying error message click-throughs at startup.
    First error message: "The operation cannot complete because of an unknown error. [CANF]"
    Second error message: "An error occured while processing the appearance of an object."

Maybe you are looking for