Cannot complete setup

Purchased new iMac 21.5 in and migrated data from PC using Migration Assistant. I cannot complete setup because my Apple password is being rejected. Also rejects attempts to set new password. Do not want to restart setup process and redo 10 hours of migrating data. any ideas. Thanks

plz check the ip address on your comp---there should not be any static ip---disabled firewall and then try opening 192.168.1.1
by the way, who is the isp?

Similar Messages

Cannot complete setup on my Qosimo F60

Hi
I have a Qosmio F60. Its new and I gave it to an IT person who initially set it up. I intended to use it with my race car simulator. Now after it is being not used at all I have pulled it out of the box and the username and password would not open the computer.
So stupid me restarted the laptop using the "restoring the pre-installed software recovery from the recovery hard disc drive" as described in the users manual. It went through the process till it got to ticking the user agreement box which I could not move the cursor to tick the authority.
Im now stuck at that level of programming. Can anyone help me complete the set up?
Thank you.
Gerry

If you cannot move mouse pointer use tab button and go to cancel option. When option cancel is framed press ENTER and I hope you will be able to continue setup option.
Test it please and post some feedback.
To be honest it is strange to me that you cannot use mouse pointer.

Not connecting to internet after installing os x mavericks. and thus i cannot complete setup

please help
today i installed mavrericks update and now my mac is showing new setup window. but it is not connecting to internet and i cannot sign in to apple account. and it seems like i lost all my data.. please help me. if i lost my data i will be killed.i feel like the new os is not installled properly. is there any way to reinstall it. do i have to download the os x again. please help me. i am in deep problem

Have you looked here:
Re: osx Mavericks can't save scanned documents with hp scanjet

Setup Assistant Freezes after installation.. cannot complete setup

Hi - I recently installed an Apple DVD RAM drive in my 450Mhz B&W G3. As far as I know it meets the system requirements - it has 640MB RAM and built in firewire.
Anyway, I was upgrading from OS 10.2.8 and I kept getting an error. So I ran the disk utility and sure enough, there was an error - and one that it couldn't fix. So I backed up all my files and decided to clean install, and it worked perfectly.
Installation had no problems, and it got completely through to the setup assistant. Except, now it got to the "select keyboard language: English, Canadian or "view all languages" - when I select English and click "continue" it freezes. Sometimes I get the spinning colorful wheel, and othertimes, it just stays frozen. After about 10 minutes, it comes back to where I can click "continue again" When I do, the continue button goes grey and it just sits there idling again.
Anyone know what the problem is or how to fix it? Thanks!
Tim

never mind, it simply needed more time - I left it for a few hours and came back and it finally made it to the next screen! Weird.
Tim

Cannot Complete Setup Wizard

Hello. Currently have a cable provider with a wired network using a wired router. Replacing the wired router (different manufacturer) with the Linksys WRT54G v6 router.
Followed the instructions from the Setup Wizard disc. Install keeps getting hung up in screen where the computer settings is being tested. It cannot connecto to the internet.
I have taken the router out of the equation by connecting directly from the modem to the computer and I am able to get an internet connection.
I have reset the router, changed wires, double-checked to make sure all wires are seated properly, rebooted the computer, modem and router, all to no avail.
Any suggestions are welcome.
Thanks.

plz check the ip address on your comp---there should not be any static ip---disabled firewall and then try opening 192.168.1.1
by the way, who is the isp?

Windows 7 - "Cannot complete setup" of Windows XP Mode

I am running Win 7 OEM 64 bit PRO on new PC:
AMD FX-8120, Gigabyte GA-990FXA-UD3 MOBO, latest BIOS
The setup gets to 99% then fails with the above message. So far I have tried:
Ensuring Virtualisation is on in BIOS
There are no bootable disks in the drive
I am running as admin with my own account logon name
I have run SFC - no conflicts
Yes I have downloaded the correct XP mode file
I have re-installed Win 7 and tried to run before installing any drivers or apps - same problem.
Now what? I tried vmware but the standalone converter gave me an error message saying it was not configured properly. I suspect either a policy problem with Win 7 or a MOBO bios incompatibility. Anyone got any ideas?

@robonline
I believe I'm seeing this same issue as well, I've got a windows 7 system that was running with an Athlon II 250 on which Windows XP mode installed and worked perfectly.
However when I upgraded the CPU to an AMD FX-8150 (in an otherwise unchanged system) Windows XP mode no longer starts properly, it seems to hang before the Virtual PC starts to boot the OS (so possibly either during BIOS POST, or right
at the transition.
I've discovered that it doesn't ALWAYS fail, and if power of the Virtual PC and Start it again a few times in quick succession it seems to then get past what ever point causes the problem and then boots the XP Virtual PC and
it works normally until it's next turned off.
So if you need XP mode (as I do for some work applications) the (crazy) work around might be to install XP mode with a none bulldozer CPU (if the try, try, try again method doesn't get the installer to work) you can probably get it to
start once you change back to your bulldozer CPU by simply trying to start the installed OS a few times in short succession.
@Alex
Many thanks for looking into this!
Rob

"cannot complete windows setup" Windows xp mode on Windows 7 professional

I am currently having a problem loading windows xp mode on windows 7 professional on my new laptop
Laptop specs
LENOVO
Processor: AMD A6-5350M APU with Radeon(tm) HD Grapihcs 2.90 GHz
Installed memory (RAM): 4.00 GB (3.15 GB usable)
System type: 64-bit Operating System

experiencing the same issues you are describing on what appears to be the same model of computer. Can anyone provide additional information on applying the suggested hotfix?
@Rick Dee - After installing both XP mode and Virtual PC service pack on the computer XP mode appears in the list of Virtual Machines. After running through the initial set up of the VM (Windows XP Mode) listed in ~/<user>/virtual machines, the
setup of the VM fails with the error, "cannot complete windows setup".
I use a vhd that I deploy to all my client computers to run XP mode. I have deployed this vhd on at least 5 other laptops with the same specs from the same manufacturer. On this particular machine though, when I tried to deploy this vhd, the
vm just hangs. So I have been trying to install the distributed copy of Windows XP mode from Microsoft. When I do this, I get the error.

I am getting error code -9808 saying cannot complete request for the i store, i am getting error code -9808 saying cannot complete request for the i store

i am getting the erorr code -9808 saying that we cannot complete my request for the i store to setup my new device ...what up with that

Try here:
iTunes Store: "An unknown error occured (-9808)"

Time Machine cannot complete backup to MyBookLiveDuo

Time Machine cannot complete backup to MyBookLiveDuo
I am trying to use TimeMachine to setup a backup from a mid-2011 iMac running OSX 10.9.3 to a 4TB WD MyBook Live Duo drive on a network. I have 3 other MacBooks setup to use this shared drive using Time Machine as well as a PC using WD backup software.
The backup from the iMac is failing with a message “The backup disk image /Volumes/TimeMachine/PM’s iMac.sparsebundle could not be accessed (error(null)).”. After looking through Pondini I change the name of the iMac from "PM’s iMac" to "Family" but the problem is not fixed.
In fact the iMac seems to still uses the old machine name in the error message.
In the console I see the following messages
5/29/14 3:02:47.124 PM com.apple.backupd[220]: Failed to eject volume /Volumes/TimeMachine (FSVolumeRefNum: -106; status: -47; dissenting pid: 0)
5/29/14 3:02:47.125 PM com.apple.backupd[220]: Waiting 60 seconds and trying again.
5/29/14 3:03:22.547 PM spindump[427]: Saved hang report for Disk Utility version 13 (517) to /Library/Logs/DiagnosticReports/Disk Utility_2014-05-29-150322_Family-iMac.hang
5/29/14 3:03:29.854 PM mds[37]: (Normal) Volume: volume:0x7fcffb877000 ********** Bootstrapped Creating a default store:0 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/TimeMachine
5/29/14 3:03:53.026 PM com.apple.backupd[220]: Network destination already mounted at: /Volumes/TimeMachine
5/29/14 3:04:49.260 PM com.apple.backupd[220]: Failed to eject volume /Volumes/TimeMachine (FSVolumeRefNum: -106; status: -47; dissenting pid: 0)
5/29/14 3:04:49.261 PM com.apple.backupd[220]: Waiting 60 seconds and trying again.
5/29/14 3:05:32.882 PM mds[37]: (Normal) Volume: volume:0x7fcffb89d400 ********** Bootstrapped Creating a default store:0 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/TimeMachine
5/29/14 3:05:52.689 PM apsd[61]: Unrecognized leaf certificate
5/29/14 3:05:55.561 PM com.apple.backupd[220]: Network destination already mounted at: /Volumes/TimeMachine
5/29/14 3:06:44.339 PM mds[37]: (Warning) Volume: vsd:0x7fcffb82d600 Open failed. failureCount:6 {
DisabledRecycleCount = 6;
5/29/14 3:06:52.608 PM com.apple.backupd[220]: Failed to eject volume /Volumes/TimeMachine (FSVolumeRefNum: -106; status: -47; dissenting pid: 0)
5/29/14 3:06:52.609 PM com.apple.backupd[220]: Giving up after 3 retries.
5/29/14 3:06:52.814 PM com.apple.backupd[220]: Backup failed with error 21: 21
5/29/14 3:07:12.831 PM com.apple.backupd[220]: Failed to eject volume /Volumes/TimeMachine (FSVolumeRefNum: -106; status: -47; dissenting pid: 0)
Ha anyone seen this problem and been able to resolve it.
Thanks!

Time Machine cannot complete backup to MyBookLiveDuo
I am trying to use TimeMachine to setup a backup from a mid-2011 iMac running OSX 10.9.3 to a 4TB WD MyBook Live Duo drive on a network. I have 3 other MacBooks setup to use this shared drive using Time Machine as well as a PC using WD backup software.
The backup from the iMac is failing with a message “The backup disk image /Volumes/TimeMachine/PM’s iMac.sparsebundle could not be accessed (error(null)).”. After looking through Pondini I change the name of the iMac from "PM’s iMac" to "Family" but the problem is not fixed.
In fact the iMac seems to still uses the old machine name in the error message.
In the console I see the following messages
5/29/14 3:02:47.124 PM com.apple.backupd[220]: Failed to eject volume /Volumes/TimeMachine (FSVolumeRefNum: -106; status: -47; dissenting pid: 0)
5/29/14 3:02:47.125 PM com.apple.backupd[220]: Waiting 60 seconds and trying again.
5/29/14 3:03:22.547 PM spindump[427]: Saved hang report for Disk Utility version 13 (517) to /Library/Logs/DiagnosticReports/Disk Utility_2014-05-29-150322_Family-iMac.hang
5/29/14 3:03:29.854 PM mds[37]: (Normal) Volume: volume:0x7fcffb877000 ********** Bootstrapped Creating a default store:0 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/TimeMachine
5/29/14 3:03:53.026 PM com.apple.backupd[220]: Network destination already mounted at: /Volumes/TimeMachine
5/29/14 3:04:49.260 PM com.apple.backupd[220]: Failed to eject volume /Volumes/TimeMachine (FSVolumeRefNum: -106; status: -47; dissenting pid: 0)
5/29/14 3:04:49.261 PM com.apple.backupd[220]: Waiting 60 seconds and trying again.
5/29/14 3:05:32.882 PM mds[37]: (Normal) Volume: volume:0x7fcffb89d400 ********** Bootstrapped Creating a default store:0 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/TimeMachine
5/29/14 3:05:52.689 PM apsd[61]: Unrecognized leaf certificate
5/29/14 3:05:55.561 PM com.apple.backupd[220]: Network destination already mounted at: /Volumes/TimeMachine
5/29/14 3:06:44.339 PM mds[37]: (Warning) Volume: vsd:0x7fcffb82d600 Open failed. failureCount:6 {
DisabledRecycleCount = 6;
5/29/14 3:06:52.608 PM com.apple.backupd[220]: Failed to eject volume /Volumes/TimeMachine (FSVolumeRefNum: -106; status: -47; dissenting pid: 0)
5/29/14 3:06:52.609 PM com.apple.backupd[220]: Giving up after 3 retries.
5/29/14 3:06:52.814 PM com.apple.backupd[220]: Backup failed with error 21: 21
5/29/14 3:07:12.831 PM com.apple.backupd[220]: Failed to eject volume /Volumes/TimeMachine (FSVolumeRefNum: -106; status: -47; dissenting pid: 0)
Ha anyone seen this problem and been able to resolve it.
Thanks!

Z10 won't complete setup after device software update, help please.

Help please, cannot complete phone setup ater performing software update using Blackberry Link.
Sequence of events;-
Phone recognised by Blackberry Link.
Reload device software selected - updated version 10.0.10.90 available.
Get update - software appears to load correctly then Z10 unplugged.
Phone reboots, Welcome to Blackberry, English(UK) ticked, swupe left.
No SIM card available, swipe to WI-Fi.
Password entered for home network and confirmation screen shows connected.
Agreement Screen - Country changed to United Kingdom(English),
at bottom of screen under I agree to the Blackberry SLA....
the 'I Agree' and 'I Do Not Agree' buttons can not be selected and
after a short delay Unable to connect screen appears.
Pressing 'Settings' goes back to Wi-Fi Networks page with
confirmation that connection is good and round we go again.
Having performed software update several times as above and also from
www.BlackBerry.com/updates by following forum posting at
http://supportforums.blackberry.com/t5/General-BlackBerry-10-Smartphone/How-
to-Reload-your-Blackberry10-OS/td-p/2187545
and getting the same result each time I would appreciate help to resolve this issue.
Solved!
Go to Solution.

Try finding a different open free Wifi hotspot to perform the setup.
It sounds like the device is never connecting to your WiFi to complete the setup.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Cannot accese setup site

Hey guys,Im using a WRT160n and im haveing trouble accesing the setup site.When i try and enter the defualt username and password the window pops up again saying its the wrong username and password.I havent even accesed the routers settings so i know its not changed.
Help?

Some stores sell routers that others have returned. You should not assume that your router was set to factory defaults when you purchased it.
You need to reset the router to factory defaults.
To reset your router to factory defaults, use the following procedure:
1) Power down all computers, the router, and the modem, and unplug them from the wall.
2) Disconnect all wires from the router.
3) Power up the router and allow it to fully boot (1-2 minutes).
4) Press and hold the reset button for 30 seconds, then release it, then let the router reset and reboot (2-3 minutes).
5) Power down the router.
6) Connect one computer by wire to port 1 on the router (NOT to the internet port).
7) Power up the router and allow it to fully boot (1-2 minutes).
8) Power up the computer (if the computer has a wireless card, make sure it is off).
9) Try to ping the router. To do this, click the "Start" button > All Programs > Accessories > Command Prompt. A black DOS box will appear. Enter the following: "ping 192.168.1.1" (no quotes), and hit the Enter key. You will see 3 or 4 lines that start either with "Reply from ... " or "Request timed out." If you see "Reply from ...", your computer has found your router.
10) Open your browser and point it to 192.168.1.1. This will take you to your router's login page. Leave the user name blank, and in the password field, enter "admin" (with no quotes). This will take you to your router setup page. Note the version number of your firmware (usually listed near upper right corner of screen). Exit your browser.
If you get this far without problems, try the setup disk (or setup the router manually, if you prefer), and see if you can get your router setup and working.
If you cannot get "Reply from ..." in step 9 above, your router is likely dead. Report back with this problem
If you get a reply in step 9, but cannot complete step 10, then either your router is dead or the firmware is corrupt, or you are having a problem communicating with the router. Report back with this problem.
If you need additional help, please state your ISP, the make and model of your modem, your router's firmware version, and the results of steps 9 and 10. Also, if you get any error messages, copy them exactly and report back.
Please let me know how things turn out for you.

"the finder cannot complete the operation because some data in [name of iMovie file] could not be read or written (Error Code 26)

Hi all,
I have an iMovie project in iMovie HD 6.0.3. (Mac OS 10.5.8)
It plays, but I cannot copy the file (including saving it to a flash drive). I get either a message
"the finder cannot complete the operation because some data in [name of
iMovie file] could not be read or written (Error Code 26)" or the
message "A project file is missing. The file [name of the QuickTime
movie inside the project.dv] couldn't be opened and is being skipped."
This happened suddenly, I was able to save a backup version numerous
times while working on the project.
I followed some of Karl Petersen's advise on apple discussions. I opened
the package contents, and everything seems to be there. The source file
(original QuickTime movie) is there and can be opened and played. I
replaced the current project file with the backup in the package
contents, but that did not change anything. I was able to export the
movie timeline into a new project as a single clip, but would like to be
able to copy the current project.
Thanks for any ideas..

Make sure all drives are formatted as "Mac OS Extended". (Journalling preferred, but not necessary).

Currently Have Photoshop CS3 & Adobe Bridge CS3 2.1.1.9. According to Adobe, Camera Raw 4.6 supports Nikon D810 NEF files. I have downloaded Camera Raw 4.6 Update. When I try to open Nikon D810 NEF files, I get photoshop error that says "cannot complete

Currently Have Photoshop CS3 & Adobe Bridge CS3 2.1.1.9.
According to Adobe, Camera Raw 4.6 supports Nikon D810 NEF files. I have downloaded Camera Raw 4.6 Update. When
I try to open Nikon D810 NEF files, I get photoshop error that says
"cannot complete request your because it is not the right kind of
document. These NEF files wont open in Bridge at all. What am I doing wrong?

Camera Raw plug-in | Supported cameras

I saved my Form Central spreadsheet file once as a excel file but it will not allow me to save it a second time as an excel file. It says that I cannot complete this action because the file me be open in another application, but it is not open in another

I saved my Form Central spreadsheet file once as a excel file but Forms Central will not allow me to save the file a second time as an excel file. I am informed that I cannot complete this action because the file me be open in another application, but it is not open in another application. What is the problem, and how do I solve the problem. Thank you. Jeff

First check the version of the document with Jongware's script "Identify.jsx" (ExtendScript/JavaScript).
You can find it here:
[Ann] Identify Your InDesign File
If it is CS 5.5 or above, you need someone to open it in the version the script says and export an IDML representation from that. Another way would be to install a 30days version of CS6 or above (CC) and do it yourself.
In regards of the script showing a result for InDesign files higher than CS6:
CS7 = CC v9
CS8 = CC v10 = CC-2014 or CC2014.1
Uwe

I am using a 2003 eMac and am running on Mac OSX vs 10.4.11. iTunes is not recognizing music I have purchased and when I try to connect when it request me to I get the following error message: Cannot complete i Tunes Store request. A required iTunes com

I am using a 2003 eMac and am running on Mac OSX vs 10.4.11. I amrunning iTunes 8.2.1 (6) and not able to upgrade iTunes on this computer. iTunes is not recognizing music I have purchased and when I try to connect when it request me to I get the following error message:
Cannot complete iTunes Store request. A required iTunes component is not installed (-42404)
Please help.

Is this music purchased back in DRM days? I don't actually have any iTunes music so I can't test with my iTunes 7.5, but I know that without iTunes 10 you cannot even connect to the store anymore. I wouldn't think that would require an active connection to the store all the time, otherwise how could you play music on a computer in the middle of nowhere? Did you do something to trigger iTunes suddenly wanting to connect and check on machine authorization?

Cannot complete setup

Similar Messages

Maybe you are looking for