Cannot compose or reply to emails in Outlook

I can read email but get no response when I try to reply or compose a new e-mail on my Dell laptop.  My account works fine on my iPhone.
Help please!

Hi,
I suggest to open Outlook in application safe and check if the same issue persists.
Click Start and start typing ‘outlook /safe’ in search bar and hit
Enter. (Without the quotes and note the space in the command)
If you’re able to work with Outlook in safe mode, then follow the steps below to disable add-ins.
Click File menu, click Options > Add-in, click Go button in the Manage: Com-in Add.
Check if there is any add-in, clear the checkbox to disable it.
If the issue still persists, create new profile in Outlook, configure an email account and verify the status.
Refer to the article provided below on how to create new profile:
http://support.microsoft.com/kb/829918
Best Regards.

Similar Messages

  • Cannot compose or reply to emails

    I cannot compose or respond to emails on my iPhone 5c. I can read them. My iPad mini is working  fine but not my phone.

    Hi JECofer,
    Thanks for visiting Apple Support Communities.
    If you're not able to compose or respond to email on your iPhone, first force the Mail app to close:
    Double-click the Home button.
    Swipe left or right until you have located the app you wish to close.
    Swipe the app's preview up to close it.
    These steps come from this article:
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    If the behavior continues, try these steps next:
    Restart your iOS device.
    Delete the affected email account from your device.
    Tap Settings > Mail, Contacts, Calendars.
    Choose the affected email account, then tap Delete Account.
    Add your account again.
    From:
    iOS: Troubleshooting Mail
    http://support.apple.com/kb/ts3899
    All the best,
    Jeremy

  • I cannot compose or reply to email messages in gmail after upgrade to 3.6.12. Shows :Loading". Gmail works ok in IE.

    After upgrade to 3.6.12 Firefox I cannot compose an email in Gmail. Shows that Gmail in "loading".
    Gmail works in IE. No problems before upgrade.

    Did check the pref dom.storage.enabled and make sure that the value is true?
    To open the <i>about:config</i> page, type <b>about:config</b> in the location (address) bar and press the "<i>Enter</i>" key, just like you type the url of a website to open a website.<br />
    If you see a warning then you can confirm that you want to access that page.<br />

  • Cannot compose or reply email with outlook using Safari

    cannot compose or reply email with outlook using Safari

    Thanks Allstar! I have been trying for days to figure this out

  • Cannot compose or reply using yahoo mail with firefox

    I have done everything Yahoo says to do which is FF's solution to my problem, but it does not solve the problem
    Yahoo mail works fine with IE & CHROME but with FF 33 & 34 it will not allow me to compose or reply to an email!
    And the checkboxes with the icons inside have been there for MANY versions.
    Sad that I will have to switch to Chrome or IE

    I am suddenly having this problem with not being able to
    reply/forward to (certain Gmail conversations).
    Now using, Mac OS 10.5.8 and experienced the presence of this issue with Firefox 3.6.10. AND 3.6.13 but not with Beta 4.
    I have used Safari and the error is not reproducible. This issue is exclusively present to Gmail in FF.
    I can confirm that FF config is presently dom.storage.enabled.
    I have started FF in safemode, disabled, updated and enabled all plugins and add-ons, restarted FF and desktop many times, the issue is still present in FF 3.6.10/3.6.13.
    Only some conversations cause this error. When I click on particular conversations reply/forward tab, the page freezes and the only way to temporarily resolve this, is to click the refresh icon as F5 will not work.
    It does not freeze the whole
    FF browser, just the window with Gmail.
    I need a fix as FF is my primary browser.
    Thanks in advance! :-)

  • Just upgraded and cannot send or reply to email

    I just bought a MacBook Pro (15"/216gHz/2gig ram) and transfered everything via firewire from my old PowerBook G4. When I attempt to reply or forward email, I click on the button (or use the menu) and absolutely nothing happens. I can click compose and get a new email screen, but when I click to send nothing happens. I receive email without troubles from all my accounts. I have no problem sending and replying to email with my old G4 (and the other computers on my Airport network - so it's not the network) and all the preference settings for my accounts are identical. Any ideas or assistance?

    In the other thread where you posted about this problem, I suggested you to reset Launch Services. Have you tried that or not?
    I’ll repeat it here in case someone else having the same problem comes accross this thread. The following article describes how to manually reset Launch Services — the notes at the bottom of the article also provide information about the side effects of deleting each of the files involved:
    Resetting Launch Services
    If you prefer using a cache cleaning utility instead of following the manual procedure described in the previous article, take a look at this other article for general troubleshooting and cache-cleaning procedures. Actually, you should also verify/repair the startup disk (not just permissions), as described there:
    Resolving Disk, Permission, and Cache Corruption
    The most appropriate utility for this particular problem probably is Tiger Cache Cleaner, but you may also want to consider other utilities, such as OnyX, or Cache Out X, which are free. Whatever utility you choose, be sure to read this first:
    Side effects of System cache cleaning
    As an example, this is how you should proceed with OnyX:
    1. Quit all applications.
    2. Launch OnyX and enter your administrator password.
    3. Go to Maintenance > Reset and check LaunchServices database.
    4. Un-check any other pre-checked options.
    5. Click the Execute button.
    6. Restart the computer.

  • I cannot send or reply to emails

    I am having problems with my emails in that I now cannot send or reply, help?

    gillian
    is this of sudden onset? Update of iOS perhaps?
    I have seen several of this issue come through and I thought certain it had been answered definitively, but alas, I cannot find the thread I remember via search.
    The one thread that has an official Apple employee participating is since the ios 8.1.2 upgrade my pop email account will not send - there are a couple of links provided for self help and a contact link if no joy.
    Happy Holidays
    ÇÇÇ

  • Cannot open hyperlink from an email in Outlook

    Until today I was able to open all hyperlinks from emails in Outlook. Now I cannot.

    Open your computers control panel to the Default Program page.
    Win 7; Control Panel\All Control Panel Items\Default Programs
    Set Firefox as default Internet Browser.
    Some programs have their own setting option as to the browser.

  • How do I set Tbird 31.5 to show options for using italics, boldface, etc. in composing and replying to email? Have been using Tbird for years and can't get it.

    I really have been using Tbird for years and I can't get the options for italics etc to show when composing or replying. I'm an editor looking for job so this is relevant. Please save me from Outlook. Thanks.

    I believe you can specify italics by putting a slash before and after the text, bold is done using asterisks before and after text, and underline is done using the underline character before and after text.

  • I cannot reply to email on Outlook.  No specific error message. "Sorry looks like there was an error.  Please try again."

    I am not able to reply to any email in my Outlook Inbox.  It doesn't matter if it's a new email or one I've already opened.  I get no specific error message, just "Sorry looks like there was an error.  Please try again."

    Boot from the Leopard DVD (I assume you are installing Leopard since you've posted in the Leopard forum.) After the installer loads select your language and click on the Continue button. After the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the left side list then click on the Partition tab. Select one partition from the drop down Partition menu, set the format type to Mac OS X Extended (Journaled) from the Format drop down menu. Click on the Options button and be sure the partition map is set to GUID (GPT) then click on the OK button. Click on the Partition button. After the partitioning has been completed quit DU and return to the installer. Proceed with installing OS X.
    If you choose to install Tiger follow the same procedure as above except boot from the OS X Installer Disc One that came with the computer (assuming that is Tiger.)

  • When I open Compose Email Window, anything I type -- in any location -- pops open the Search box at the bottom of the screen and my text goes into that box -- therefore cannot compose or reply to an email.... Any suggestions?

    Problem is intermittent.... but most of the time (90%). Occasionally happens right in the middle of successful email start.... get two lines in, and it suddenly switches into the Find box. Have reinstalled and updated Firefox to latest version (3.5.13 as of 9/16/2010) without any change. Have shut down Firefox and restarted without change. Have rebooted entire computer without change.

    Hi,
    Just several ideas to be checked:
    1. Please, verify the prerequisites of Operations Console listed by the following link:
    http://technet.microsoft.com/en-us/library/dn249696.aspx
    2. Install all the SCOM related system updates.
    3. Clear SCOM Console cache:
    http://systemcenter.no/?p=215
    4. Try to clean up Ops Manager cache on SCOM Management server. To do this stop Microsoft Monitoring Agent service, navigate to SCOM installation path (by default, C:\Program Files\Microsoft System Center 2012 R2\Operations Manager\Server) and
    delete Health Service State folder. Start Microsoft Monitoring Agent service afterwards.
    5. If nothing helps, maybe try to reinstall SCOM Console.
    Igor Savchenko, VIAcode Consulting LLC (http://www.viacode.com/)

  • Why is firefox crashing every time I try to compose or reply to email in Gmail and Hotmail?

    After I upgraded to Firefox 10, I can open gmail and hotmail, read email, but if I try to compose an email, or reply to an existing one, it crashed. Also, just now when I tried to fill in this box here with firefox, it crashed. I am now using Chrome, and will continue to do so until there is a solution. This crashing thing is more than a little annoying.

    https://support.mozilla.com/en-US/kb/Firefox%20crashes#w_get-help-fixing-this-crash
    Type '''about:crashes''' in the URL bar and hit Enter. <br />
    # Middle-Click the hyperlinks to bring up each Crash Report page in a new Tab; each page may take a few minutes to load.
    # '''Then copy'n'paste the URL of each of those reports into the message box here.'''
    # We'll see if we can help you figure out what is causing those crashes to happen.
    If you can't open Firefox or keep it open long enough to get the Crash Report ID's, even in the Firefox Safe Mode - see the section entitled - '''''You can't open Firefox because it crashes at startup even in Safe Mode:'''''.

  • IPhone 5/iOS 6 - replying to emails using "Outlook Style" Format?

    Hi all:
    I've googled around for the answer to this, but haven't found anything particularly helpful, so I'm reaching out to the community here in hopes that someone has a solution.
    My company is offering us the choice of continuing with a Blackberry, or switching to an iphone 5.  The main thing holding me back from switching to the iPhone is that I don't see a way to change the format of a reply email in the default Mail.app so that it is using the "Outlook Style" format.
    That is, when replying via the Mail.app on an iPhone, you will get this email format:
    On DATE at TIME, "SO and SO" <email address> wrote:
    <blurb of text>
    However, I want my replies to look like this:
    From:
    Sent:
    To:
    Subject:
    Does anyone have any suggestion for how to change the reply email format so that it follows the Outlook style?  I do not want people to know that I am replying from a mobile device, and it is readily apparent that you are doing so via the iPhone.  (The blackberries do not have this problem as they conform with the Outlook format by default).  I also think it looks very unprofessional in the business environment where the vast majority of enterprises use Outlook as their email client.
    Thanks!

    Hi gdgmacguy, thats so much for your reply. Currently this is only happening with one email address, not all. I also asked our exchange admin and he didn't have any ideas... any clues as to what to have him look for?

  • Cannot Forward or Reply to Emails

    So why am I getting emails but cannot reply or forward emails? I used to be able to but now I click the button, choose either of those options and nothing happens. Anyone see this?

    Always good advice. I would add that I would not use the iPhone as the main repository of ANYTHING. Nothing against the iPhone itself, but it is very small and very losable. The central repository of all your mail, contacts, and calendar should be either your desktop PC or an online service, like Google or MobileMe. The iPhone should just provide access. In the event the iPhone is stolen, lost, or spontaneously combusts, you will be ok. (well, not if it combusts in your pocket, but that is another story.... )

  • TS3899 Cannot send or reply to email

    Cannot get set up correct to send replies to email ...what am I missing?

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    Setting up and troubleshooting Mail
    http://www.apple.com/support/ipad/assistant/mail/
    Server does not allow relaying email error, fix
    http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
    Why Does My iPad Say "Cannot Connect to Server"?
    http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
    iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
    http://support.apple.com/kb/ts2621
    The iPad's Mail app has no provisions for creating groups. However, you can use a third party app that many users recommend.
    MailShot -  https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
    Group Email  -  https://itunes.apple.com/us/app/group-email!-mail-client-attachments/id380690305 ?mt=8
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
    http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
     Cheers, Tom

Maybe you are looking for

  • I HAD MY MACBOOK MEMORY CLEARED AND CANNOT UPLOAD MY IPHOTO ANYMORE

    I recently had my macbook memory cleared and reset to all default settings. I was advised to back up all my personal documents and data as everything will be cleared. However, due to some technical issue (and one of the reason for memory wipe) i had

  • Safari won't open secure websites

    Since installing Mountain Lion my Safari will only open https websites about 25% of the time. I get the message "can't establish secure connection"..... I close Safari and reopen and at times it will work for a short while. Other times I have to rest

  • How to use a boolean to log time?

    Hi all, In my application, I want to use a boolean to log a time on continuous bases. When boolean gets 1, it logs system time. When boolean gets 0, it logs system time...& the cycle goes on.. We can use push button for changing boolean value... Plea

  • IN IMPLEMENTATION PROJECT

    hi expect,    what are role of sap xi consultant in implementation and in support?

  • Save & Transfer not working

    I have done with filling a real-time infocube using planning. I am able to see the data at the report, when the query is executed. But I want to re-write the data at the cube from query. So I have chosen the option of “<b>data can be changed using us