Cannot Concatonate summary cards message

Forum,
In a SAP B1 2007A system we are trying to insert a BP code into the Consolidation Account field under Business Partner Master. Upon doing so we are getting the following message:
Cannot Concatonate summary cards [Business Partner - BP Summary], 'GRE18' [Message 3502-1]
We have other accounts which have successfully been marked for consolidation and upon comparing them I can see not obvious differences other than the account we're entering the consolidation account against has a minus balance.
Look forward to hearing from you.
Regards,
Juan
Located this thread: Payment Consolidation error
Will give this a try.

Start processing them at the top, at least in this case.
Once you import java.io.Reader, a whole chain of classes that suddenly compile might be started.

Similar Messages

  • Cannot use credit card message

    I Keep getting a message that says "cannot use this credit card". There is nothing wrong with my visa card. Why do I get this message?

    It is a 'proper' credit card (and it's not a debit card) that you are trying to use, not a pre-paid card ?
    For a card to have a chance of being accepted it needs to be registered to exactly the same name and address (including format and spacing etc) that you have on your iTunes account, and have been issued by a bank in the country where you and your iTunes account are. If your card does match then you could try contacting iTunes Support (these are user-to-user forums) and see if they know why it's not being accepted : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management
    Or do you have another card that you could try ?

  • HT1386 I have just rceived an upgrade to an iPhone 3GS. Now, when I visit the Store all the prices are in US dollars, not a big problem but I cannot edit my card details or contact to a UK address. I cannot see how to change this.

    I have just rceived an upgrade to an iPhone 3GS. Now, when I visit the Store all the prices are in US dollars, not a big problem but I cannot edit my card details or contact to a UK address. I cannot see how to change this.

    Hi Roger
    Thank you for your reply.
    My original feed is: http://casa-egypt.com/feed/
    However, because I modified the feed http://feeds.feedburner.com/imananddinasbroadcast and nothing changed, I redirected it to another feed and then I deleted this feed.
    Is there any way to change the feed in itunes? The only feed I have now is  http://feeds.feedburner.com/CasaEgyptStation
    I tried to restore the feed http://feeds.feedburner.com/imananddinasbroadcast but feedburner refused.
    I know that I missed things up but I still have hope in working things out.
    Thanks is advance.
    Dina
    Message was edited by: dinadik

  • I cannot send a text message to anyone with an android phone. Any suggestions?

    I just got an iphone. I cannot send a text message to anyone with an android phone. I have tried turning imessage off and also wifi off. Any other suggestions? Most of my family including my husband currently have android phones and I need to be able to talk to them. I can send messages to iphones and ipads but not their phones. What can I do??

    I don't see the "Start new conversation from:" I spent 1 hour and 40 minutes last night on the phone with Verizon. We completely reset the phone after backing it up to icloud. His conclusion was I need a new SIM card and I will not be able to go take care of that until tonight. I don't know if that will fix it or not but that is what he said...

  • 5800 memory issue, cannot acces memory card, phone...

    Hi all,
    When taking pictures with the 5800 I get the message (cannot acces memory card, phone memory used instead)
    I change memory options to E: Memory card but still get the message when taking pics.
    I can access the card fine from phone file manager and through PC.
    Have reformatted and tried second sd card.

    On your device, look at Options > Status > Menu key > Database Sizes.
    Which are the top five largest offenders?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Cannot send any text messages

    hi! can anyone help me? i cannot send any text messages on my 5700. even checking on my balance, i can't even sent it. I tried to do the factory settings but that doesn't work too. there's an error saying that:
    general: memory full. close some applications and try again.
    I erased all my messages in my inbox and in sent messages. I even deleted some applications to my phone. And my phone memory and memory card are not also full.
    please... i really need help...
    tnx!
    hiei0006

    11-Dec-2007 11:03 AM
    hiei0006 wrote:
    hi! can anyone help me? i cannot send any text messages on my 5700. even checking on my balance, i can't even sent it. I tried to do the factory settings but that doesn't work too. there's an error saying that:
    general: memory full. close some applications and try again.
    I erased all my messages in my inbox and in sent messages. I even deleted some applications to my phone. And my phone memory and memory card are not also full.
    please... i really need help...
    tnx!
    hiei0006
    yeah even i've been having the same problems.. General:memory full. close some applications and try again. tried resewting the phone nut to no avail..

  • I updated my 3GS iphone to 5.0.1 cannot receive calls or messages.

    I updated my 3GS iphone to 5.0.1 yesterday.  I can make calls and send messages, but cannot recieve calls or messages. I called telstra as I instantly thought network problems.  My friends and family who are also on telstra have not had network issues.  I thought it was strange that this has only occurred after updating my software??  I have restored my phone, reset network settings and still nothing!! Is anyone else experiencing anything similar?
    Thanks,

    i have since inserted my sim card into an old phone and then put it back in my 3gs and just received 40+ messages.. not sure why its working now, but it is so I'm happy

  • Cannot buy gift card

    I'm trying to buy an e-mail gift card, but iTunes produces a loop with no way out but Cancel.
    From the main menu, clicked Buy iTunes Gifts.
    Clicked Buy Now next to Email Gift Certificates.
    Filled in the form, selected $50, and clicked Continue.
    Filled in my Apple ID and password.
    On the verification screen, clicked Buy.
    Got the verification screen again with a red text advisory to fill in my Apple ID and password and then click Account Info. But there's no interface for doing that.
    Checked the previous page, came back, tried clicking Buy again. Same problem. Checked my account settings and verified my credit card info. Tried again. Same problem. Cannot buy gift card.
    Any other suggestions?

    Check to make sure you're connected to the correct country's iTunes Store. Go to the bottom of the iTunes Store main page (in iTunes) and look for the My Store pulldown and if it's incorrect, change it to your country. Note that the Store you're using must be the same one in which you have your account. You cannot purchase a gift card from another country's iTunes Store.
    Hope this helps.
    Message was edited by: Dave Sawyer

  • I am trying to email pictures from my ipad to my email address on my computer and I have been going along nice but now I get a message that says "cannot send mail the message was rejected by the server"  can't see to figure out why it stopped sending now.

    I have been emailing pictures from my ipad to my computer and have been going along nicely and now when I went to send 5 pictures to my computer from my ipad I am getting a message that says " cannot send mail The message was rejected by the server"  cannot understand why this is happening and have not been able to fix.  Now when I try to send pictues even to another email address I am getting the same message.
    Help.

    Email may not be the best way to move pictures.
    There are lots of ways of moving files.
    A simple and popular way to copy files and share files among your devices.
    https://www.dropbox.com/
    "Box lets you store all of your content online, so you can access, manage and share it from anywhere. Integrate Box with Google Apps and Salesforce and access Box on mobile devices" Rated the most secure cloud storage by SkyHigh Networks.
    https://www.box.com/
    Using iTunes to transfer files:
    http://support.apple.com/kb/HT4094?viewlocale=en_US&locale=en_US
    Files Connect -- "Cloud Storage services like Dropbox, MobileMe iDisk, Google Docs/Picasa, Facebook photos, FTP, SFTP, WebDAV ... AFS (Apple File Shares) SMB (Windows shares)  protocols"
    https://itunes.apple.com/us/app/files-connect/id404324302?mt=8
    Windows File server
    http://itunes.apple.com/us/app/filebrowser-access-files-on/id364738545?mt=8
    "The kiteworks mobile file sharing solution provides secure creation, viewing, and sharing of enterprise content on smartphones and tablets while providing IT and security teams the administrative controls to manage user privileges and access rights necessary to ensure enterprise security and compliance."  " Includes choice of private cloud on-premise."
    http://www.accellion.com/solutions/mobile-enablement/mobile-file-sharing
    "Dukto is a simple application that allows you to share files between devices connected to the same (wireless) LAN network."
    http://www.tidal.it/?page_id=309&lang=en
    http://www.msec.it/blog/?page_id=11

  • Since upgrade to iOS 7 Email error on over 100KB emails "Cannot Send Mail  The message was rejected by the server because it is too large." Connecting to Exchange via Activesync

    Hi,
    Following the upgrade to iOS 7.0.3 on all our iPhone and iPad devices, it has been identified that when sending emails around 100KB in size and over an error message appears on the device stating “Cannot Send Mail  The message was rejected by the server because it is too large.” See error message below. The send/receive limit is over 10MB so this is not the issue.
    We are in an Exchange Environment using Microsoft Activesync. This issue is not evident in iOS 6. This has been tested on an iPhone 3GS running version iOS 6.1.3. We have been unable to repeat the issues seen on iOS 7 on the older OS. It is not possible to roll back to the older operating system as Apple are no longer signing the software.
    We use Microsoft Active Sync to connect to our Exchange servers through a TMG. The issue is very inconsistent, some identical emails go through, some fail. This is not an issue with the send/receive limit as this is over 10MB. The error message when it fails on the TMG is Status: 413 Request Entity Too Large, which we believe is from IIS on the CAS server.
    Does anyone have any suggest course of actions to take?
    Many Thanks

    This resolution have to attend at the server not with the ios device. My employer's mail administrator reject me to correct it from the server. As his concern is, if ither ios devices works why don't mine? So I am helpless than changing my iphone. It works fine for early versions of ios and with androids. And also one of my friends iphone4 with ios 7 (similar as mine) works too. So I guess it's something wrong with my iPhones settings. But basic question I cannot understand is it works in my phone before this ios7 upgrading. And currently working with my yahoo account too. Favourable reply expected.

  • E mail is frozen.  Cannot open or delete messages., E mail is frozen.  Cannot open or delete messages.

    E mail is frozen.  Cannot send or receive messages.  Checked settings which seem correct.  also, i signed off from aol mail on the web.  Any suggestions would be greatly appreciated!

    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    Or quit mail and restart.
    Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

  • I cannot open iphoto- the message I am getting says Shut down and restart your computer, and then open iPhoto again. If the problem persists, try rebuilding your photo library. To do this, quit iPhoto, and then reopen it while keeping the Option and Comma

    i cannot open iphoto- the message I am getting says Shut down and restart your computer, and then open iPhoto again. If the problem persists, try rebuilding your photo library. To do this, quit iPhoto, and then reopen it while keeping the Option and Command-
    I tries and it doesnt work!!

    What version of iPhoto? Assuming 09 or later:
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  
    Regards
    TD

  • How can I open my file after 'cannot find -filename-' error message?

    OK, the bottom line is, InDesign crashes and I cannot recover my file. I get a 'Cannot find file' error message when I try to open the file.
    I am using CS6 on a MacBookAir, OS X Yosemite.
    I have tried finding the 'InDesignFileRecovery' folder, I cannot find it anywhere, it's not in my Library or Caches folder.
    However, I do work in dropbox, so I just headed over to dropbox to recover from their 'previous versions'. It starts to get weird. There are lots of previous versions (I save very regularly) but when I download a previous version (that I know was fine) it downloads with a indd.txt extension. So I remove the txt extension and keep the indd and everything looks fine, but then that recovered file gives the same message. I tried renaming the recovered file and opening that, same 'cannot find file' error message.
    I can open InDesign and open the file from the day before, but none of the dropbox earlier versions of that day's work. I am SO sick of this happening. It happened to me last week to, so far I have lost 20 hours work :-(
    I have tried quitting InDesign and restarting the Mac, doesn't help. The only thing I can think of is to 'save as' every couple of hours, at least then hopefully I only lose 2 hours work.

    Thanks, when you say 'hidden by default' then how does one find it? I have already tried the path you mention and there is no sign of a cache folder with Adobe files. Spotlight doesn't reveal anything either.

  • Does anyone have "No sim card" message after upgrading to iOS 7.0.2 on an iPhone 4 ?

    Hello,
    I've upgraded my iPhone 4 (8 GB model - GSM) to the new iOS 7.0.2 version yesterday evening and strangely enough he restarted fine, but with the "no SIM card" message. After having pulled out and put back in the micro SIM card several times without success, I've restored the iPhone completely to the 7.0.2 update, but the problem still lasted.
    I've personally solved the issue by downloading the original 7.0.0 IPSW file and forcing iTunes to restore it: push on Option/Command key while clicking on the restore button in iTunes after putting the iPhone in DFU mode by pressing the Home button when powering on . After the restore everything works fine again and I had just to unlock my Sim Card the regular way in order to activate.
    Therefore I'm wondering if anyone else has also encountered this problem and if someone could explain me the origin of this issue.
    I'm living in Belgium (Europe) and using Belgacom Proximus as carrier.
    Best regards,
    Amaury Vaernewyck

    Hi MajorChipHazard,
    Did my solution work for you ?
    Best regards,
    Amaury Vaernewyck

  • I cannot send or receive messages on iMessages since password reset.

    I forgot the password to login to my Mac and had to reset it using my Apple-ID. Prompts then came up asking me to put in my icloud/facetime etc passwords. I had to figure out my old password in order to login to the Apple keychain or something to be able to automatically login to the Wifi and such. I did manage to recover my password and everything seems to work fine now except iMessages though, which I didn't realize until someone sent me an iMessage that I never got and I noticed that I also couldn't send any messages back even though I was connected to the internet. I tried logging out of iMessages and back in, but that only made things worse as I couldn't even log back in and had to change my Apple-ID password to log back in (because putting in my Apple-ID for the iMessages password in the prompt that came up after I put in my Apple-ID password didn't work). Now I am logged back in but still cannot send or receive messages.

    I have restarted and now I realize that I am still having the issue with not being able to access the keychain "login", so I get 3 options, to either continue, create a new keychain or update the keychain password. According to some Apple page I found the password for the login keychain should be the old password (which I forgot). Even though I recovered this password, this doesn't work. I also tried my original Mac password, and my Apple-ID password. I don't know what else it could be. Should I just make a new login keychain at this point?

Maybe you are looking for

  • On my macbook pro the Software Update appeared, then it asked me to update some software what should I do?

    On my mac the Software Update appeared, then it asked me to update some software,when I clicked Install all or update all, it said that it will restart and it told me not to turn it off, then when the screen appears, it is too slow, I can't "barely"

  • Base64 encoded attachments misunderstood by recipients

    My boss uses Mail.app, and a number of people have reported that they can never open her attachments. When I look at the files they receive from her, they appear to be base64 encoded, and indeed decoding them makes them perfectly readable. Unfortunat

  • X1 not hibernating

    I have the following machine - 1293CTO running win 7 sp 1 and BIOS 8MET27WW (1.27). I have set it up to hibernate when battery level reaches a certain level or when idle for X minutes. I have also setup sleep mode to kick in before hibernation. Sleep

  • Alternate video tracks not visible

    I have video files that occasionally display very different content to the primary video content, especially the first time they're played. The video stream with start to disintegrate and for a few seconds something completely different is viewable.

  • Local Authenticator

    I'd like to know the exactly configuration of local authenticator on a AP1100. I try the configuration found on cisco documents, but it dosen't work. In particulary i use a AP like a RADIUS SERVER. Thanks NP