Cannot Configure PO Link in C1

So I got into work this morning to find my 7.0.3 Post Office was not receiving messages from it's Domain.
I went in to the HTTP view of the domain, and it showed for link that the PO had an address of 127.0.0.1 :(
Went into ConsoleOne link configuration tool and attempted to look at the link configuration there. When I switched from the Domain links to the Post Office link, I received two errors windows:
"General directory access error
The attribute value is null. 63063"
Then the next:
"General directory access error
LOGIN CANCELED"
Any thoughts?

Originally Posted by aaronm04
Could this be an eDirectory issue? Is your tree in sync? Can you edit the PO object?
You should be able to temporarily modify the link from the HTTP console. It will change it but it won't be permanent (e.g., restarting the agent will revert it to what is in eDir).
I cannot remember where in the HTTP console to configure the links... I do it all the time in ConsoleOne. Can you remind me?
Sean

Similar Messages

Cannot open some links

I clicked a bad page the other day and installed some malware. I [carefully] removed them manually, but perhaps I deleted a wrong registry key. Anyway, I'm left a little bit lame as I cannot open some links or pages, and I cannot restore previous versions
of Windows.
Win 7 home
IE 11
Issues:
1. Wikipedia .png images will not respond at all to a left-click. I can open them by right-clicking.
2. wordpress.com the reader link and a few other links hang.
generates the error Line: 4235
== Error: The system cannot find the file specified.
The line of code is ... if( !window.localStorage ){
3. System restore would not restore previous versions. It was unchecked in system, and I have since re-enabled it and allocated space. I have not tested it.
actions performed:
- Googled for a day and a half
- tried re-registering dlls
- checked file associations
- reset security and settings in IE
- ran IE with no add ons
- ran IE in safe mode
- rolled back to IE 10 and reinstalled IE 11 (with much pain with failing updates needing manual uninstallations)
I am now at a loss at what to try next for the IE issues. Any help or ideas will be appreciated. I'd rather not reinstall or upgrade right now.
Thanks
John

Hi Power Unit.
Considering the machine has been injected by some malware,I suggested you to perform a full scan with the antivirus software in safe mode to have a double check .
According to your description ,it seems that there is something wrong with system files.We can run "sfc /scannow"to have a health check of the system files.
I noticed you have tried to reinstall the Internet Explorer 11 .How did you do that ?
We can run the following command line to uninstall the Internet Explorer 11 and then download it to install it .
"FORFILES /P %WINDIR%\servicing\Packages /M Microsoft-Windows-InternetExplorer-*11.*.mum /c "cmd /c echo Uninstalling package @fname && start /w pkgmgr /up:@fname /quiet /norestart"
Internet Explorer 11 for Windows 7
http://www.microsoft.com/en-hk/download/internet-explorer-11-for-windows-7-details.aspx
If the issue persists ,we may need to do a in-place upgrade to have a repair .We may lose some configurations.Here is a link for reference :
How to Perform an In-Place Upgrade on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2
https://support.microsoft.com/en-us/kb/2255099
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Cannot configure codec g729a & g729ab in Cisco AS5350XM

Why I cannot configure the codec g729a & g729ab at dial-peer voice or voice codec class in AS5350XM.
I noticed in the datasheet in this link for IP-IP GW,
http://www.cisco.com/en/US/prod/collateral/voicesw/ps6790/gatecont/ps5640/product_data_sheet09186a00801da698.html
all codec for G729 are supported.

In some models you configure that under voice-cards. Others support flexi complexity and it's all automatic. You are never presented the choice of annex a or not with cisco gateways.
However, if you're using SIP, there are special cases:
http://www.cisco.com/en/US/docs/ios/12_2t/12_2t11/feature/guide/ftcodec.html
As an appreciation to those providing answers, please rate useful posts with the scrollbox below!

Setup synchronize with address for Sage ACT! showed Runtime Error: Cannot configure the section.

Hello Blackberry Senbai...
As my problem showed as subject line. "When I setup synchronize with address book for Sage ACT! showed Runtime Error: Cannot configure the section."
Setup was stopped from this point.
my system info..
Desktop Manager version is 5.0 downloaded from Blackberry website.
ACT version is 2010.
OS: Window XP Pro with service pack 3
Thank you for your time to review my problem.

Hi and Welcome to the Forums!
Since the version of ACT that you state is not contained in the PIM compatibility matrix, I'm not sure that there is anything to be offerred...
KB12268 Applications supported by BlackBerry Desktop Manager for synchronization
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Cannot configure Eclipse plugin for windows Sun portal 7.2

I have downloaded portal-7.2-windows-x86.zip and i have run the setup.bat as mentioned in the README.txt.
I can open the console and portal pages.
But I cannot configure the eclipse plugins with this image.
For web space instance it shows Missing classpath entry *"C:\PS7.2\appserver\domains\domain1\lib\portal-kernel.jar"*+
For portlet containeer 2.0 instance it shows *Missing classpath entry C:\PS7.2\appserver
Please help.+
Note: The ecplise plug ins are installed properly.

I'm afraid that I only built QT for CE once and that was many years ago, so I am hardly an expert.
I would search the entire QT code base and see if you can figure out what it thinks std::Lockit actually is. I would still try adding my own std::Lockit::~Lockit just to see if you can resolve the compile errors (this would obviously still need to
be resolved, but at least you would know that is your only problem).
As far as static linking, try to figure out where the /MD (or /MDd) compile option is coming from in the configuration scripts and change it to /MT (/MTd).
You might also look here: http://stackoverflow.com/questions/16770179/what-std-lockit-does. That sounds like you might have an interator debugging/secure SCL mismatch.

Excel 2013 "cannot use object linking and embedding error"

Hi
We are using excel export as pdf functionality and have the following DCOM configuration
1.start->run and type 'DCOMCNFG'
2: Open 'DCOM Config' and locate 'Microsoft Excel Application'
3: Set its identity to 'This User' and give specific service user
On opening excel we are getting "cannot use object linking and embedding error" and the microsoft sugestions tells to change to launching user which is not an option for us,Is there any other suggestion to fix this issue by keeping Dcom
configuration with'This User'
Thanks in advance
Pradeep

Hi
when excel is opened, a warning pops up saying "Cannot use object linking and embedding" . This
fix change the DCOM ID to Launching User) does not work for us. We need the Excel DCOM ID to use a particular user "domain\user" in order to access excel from our website.
Is there any other suggestions
Thanks in advance
Pradeep

I Cannot configure mailaccount. iPad crashes as soon as i tap email,contacts and calendar in "instellingen"

I Cannot configure mailaccount. iPad crashes as soon as i tap email,contacts and calendar in "instellingen"

While sync with Link should work it is buggy and is an afterthought to the whole BB10 system. I recommend using an Outlook.com account, installing the Hotmail connector in Outlook, and then syncing the Outlook.com contacts and calendar to the BB10 device. I say Outlook.com because it uses Exchange Active Sync which is the most reliable sync to the device.
I used to sync with Link as well but the Outlook.com wireless sync really is far better.
As for the original question I don't know why it's not recognized. i see this reported on the forums all the time.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Cannot configure my iPhone 3gs after i have updated from 5.1.1 to os 6.0

hi i need some help, im using iphone 3gs, when i connect it to my mac it says theres an update to my iphone which i did install, but few minutes after its telling me that i need to restore my iPhone. i did restore it but i cannot configure it anymore, in itunes it says there is no sim card installed in the iphone that your attempting to activate.

in itunes its telling me theres no sim card installed in the iphone you are attemptng to activate.

How to configure a link in my page which should navigates to new webpage

Hi ,
Iam using Jdev 11g(11.1.2.0.0)
My scenario is like i need to configure a link in my page. If i click that link , it should navigates me to another web page.
Please tell me how to configure the URL to which it has to be navigated on clicking the link.
Thanks in advance

I assume that you are using adf rich faces. In this case you use an af:goLink and give the whole URL as you would type it in the browser as the 'destination' property select '_blank' as 'TargetFrame' to open a new window...
Timo

When packaging a file in indesign - Error message - Cannot copy necessary linked file(s)

When packaging a file in indesign - Error message - Cannot copy necessary linked file(s)

Can you select all Links in the Links Panel
Use the Flyout Menu on the top right of panel.
Choose "Utilities>Copy Links to"
And see if that works.

I seem to have lost some of my settings and now I cannot configure my airport connection. How do I get my settings back?

Hello. First time using this. Still trying to figure out how to post my questions. I seem to have lost some of my settings and now I cannot configure my airport connection. How do I get my settings back?

If you are using cable and a Nethear router sounds like from the information you provide before your Airport setting are setup improperly. PPoE is not something a cable service would need to work. Fallow the steps I will provide bellow, I will add some screen shots also to assist if necessary.
1 - Open System Preferences from  (Menu)
2 - Click "Network"
3 - From the Network window you are going to wanna make sure Location is : Automatic and Show is : Airport
4 - Once the Show: Airport is select you should see a window like this, my window is selected for Ethernet simply because I am no longer running Tiger but the window will look the same.
5 - You will want to click on the PPPoE tab and you should see this
6 - You're gonna wanna make sure " connection using PPPoE " is not select, if it is make sure to uncheck this option
7 - Once this is uncheck make sure to click "Apply Now"
8 - You will want to click back on to the "TCP/IP" tab and make sure IPv4 is set to " Using DHCP "
9 - If the option to " Apply Now" is available again please click this
10 - Once this is done go to your Aiport Menu and see if your network is listed and select your network and eneter the password if necessary.
11 - If after these steps you still have issues I would recommend Power Cylcing your Router and Modem for about 5 minutes
12 - Make sure all lights are off when unplugging the Router and the Modem
13 - Some Modems have backup batterys so you may have to push in a tiny button on the back with a pin

Wiki file attachments - can the wiki be configured to link to a file already on the server rather than uploading it into the page?

Can the wiki be configured to link to a file already on the server rather than uploading it into the page? This would enable users to open (and edit) the original server hosted document rather than downloading a static copy that can't be edited and synced back into the wiki page.
As a workaround I've tried attaching an alias to a file but it doesn't work - the wiki instead uploads the aliased file.
From what I can work out, the default wiki behaviour is to upload a document to a wiki page, which creates a copy of the uploaded document in the wiki database. This copy has no connection to the original document. It can be downloaded and edited, but the edits are not saved back into the wiki hosted version of the document.
I'd like to be able to upload a link or alias to a document (with preview please!) already on the server. A user could then preview the document or click to open and edit it.
The only way I can do this at the moment is to create a link "afp://123.../doc.rtf" to the original. This is timeconsuming and confusing for non-technical users and doesn't offer the benefits of the attach function (ie document preview).
Is there any way the wiki can be configured to link to documents already on the server using the attach functionality?

An update for anyone in a similar situation.
Patch 3944727 for 9.0.4.1 that solves this issue: "USER LOV IASM11SHIP EDIT USER LOV SHOULD SHOW THE NICKNAME ATTRIBUTE." However, the patch is mutually exclusive with the latest CPU's and there's no plan to merge the pacthes given the dwindling support for 9.0.4.1. So that patch is pretty much worthless.
I've been told that this patch is included in newer portal versions, so the real solution is an upgrade.
Trenton

I cannot configure pop account in mail, says it is offline. What to do?

I cannot configure pop account in mail, says it is offline. What to do?

Welcome to Apple Communities
Download it here and install. Sometimes the download fails with Software Update

Cannot install Blackberry Link

I just purchased a Z10.
I am running Windows 7 on my laptop and cannot get Blackberry Link to install. I get Error 1920. I turned off all firewalls and security and I am logged in as Administrator. I called Blackberry Support number, and they told me it was a Microsoft issue and I would need to contact Microsoft. Microsoft will charge me for the support call,so I am looking for any other information about this.
I like this phone, but may take it back if I cannot get it to install as I have been unable to get all my contacts to transfer from my droid phone.
Any suggestions?

Hey shinessun9,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
Follow the steps in this KB article to resolve the Error 1406: www.blackberry.com/btsc/KB10634
Once completed then attempt to install BlackBerry Link.
Let me know if you have any more questions.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Windows host cannot establish Ethernet link to Arch Router

This is a weird problem.
I have a Windows host about 20 meters away from my Arch Router, the Ethernet cable goes into the wall, with wall sockets, so it's a total of 3 cables (1 in wall, 1 @ router, 1 @ host). I've tested the Ethernet cables with a LAN tester, they are all fine. When I connect the host to a Linksys router using the same cables, an IP address is obtained and the link is up and running.
But when I connect the host to my Arch Router (an Arch computer with some network cards), no ethernet link at all is detected. No lights on the ethernet card of the host, and ethtool on the router reports the link being down. I have connected my laptop to this ethernet card of the router and it works just fine, I get an IP and I can surf the web etc.
I really have no clue why this other host cannot establish a link. Does anyone have a clue what the problem might be?

pyther is right. Check for Auto-MDIX support on your network cards.
What network cards are you using?
Rule of thumb:
Auto-MDIX is a requirement in the Gigabit Ethernet specification, so proper Gigabit capable cards will work 99% of the time whatever cable you use.
Fast Ethernet (100mbit) and below does not have Auto-MDIX in it's specification, so those 9 out of 10 of those cards will not perform it! When connecting these directly to another network card, use a cross-cable.
Also make sure the network cards are in working order. I assume the ArchRouter PC's network runs fine when you connect that to your Linksys router?

Cannot Configure PO Link in C1

Similar Messages

Maybe you are looking for