Cannot connect a new computer with vista

Hi !
I have the wireless router WRT54G and I am currently using a computer with Windows 2000 to connect to the router. The router works perfectly with this computer. However, I bought a new sony computer with windows vista. This new computer recognizes the router and is connected to it. However, when I open the explorer and cannot go to any web page. Can anybody help me out with this? Thanks!
Matias

ohhh..too complicated... you dont need to customize the settings if its already connected to the network.
>>If its already connected, make sure its getting an ip address coming from the router with a valid dns servers.
>>Try to ping router's default gateway and check if its communicating with it.
>>ping a website *(ex. ping yahoo.com)*. check if its getting replies.
Its just a simple and basic networking procedure.
xavier.
PROBLEM •► Reconfiguration of the Printserver
HISTORY •► Working fine before
RELEVANT NETWORK INFO:
•► Wired: 3 dt OS: xp
Wireless:1 lt built in OS:xp
•► Linksys Model#2: wps54g v
Serial Number: si4005802038 Warranty Expiresec 2008
•► Linksys Model#1: wrt54g v1.1
Serial Number: cdf20c902024 Warranty Expires:Jan 2007
TROUBLESHOOTING:
Specific Step-by-Step procedures taken with Customer. USE DETAIL.
█► CLient confirmed to me that the internet connection is working behind the linksys router and the only device left for reconfiguration is the printserver.
• Wireless settings needs to be check and reconfigured
• Successfully Charged
█► Access ui of the router
• EDit wireless settings [ userdefined ssid, channel 11 and wep is disabled ]
• Hardwire Desktop to the router - printserver - printer.
• Print the ip address - 192.168.1.103
• Syncronize wireless SSID - set static ip, subnet and gateway
█► Powercycle the printserver and the router
• Status is ONLINE
• Configured for LPR Printing - successfull
• Able to print wired
█► POwercycle the printserver and the router
• Able to Print wirelessly !!!
CLOSING REMARKS:
Mentioned Disclaimer: no
Mentioned 7 days: yes
Customer agreed to close the case: Yes
Customer agreed issue was: Resolved
Customer satisfied: Yes

Similar Messages

  • I just got a new computer with Vista on it. When I hook m...

    I just got a new computer with Vista on it. When I hook my WRT54G router to it, I am unable to send e-mails. They get stuck in my OUTBOX and I get a timeout error. I can receive e-mails but cannot send them. Also, my internet can drag at times when the router is connected. When I remove the router, everything works fine.
    I've contacted Tech support several times and every suggestion they give doesn't solve the problem. I've updated firmware, changed all sorts of settings in the router setup page, including adjusting my Port Range Forward settings (at the instruction of tech support)
    I'm wondering if it's just a Vista thing and I should buy a newer router. I don't know what else to do.
    Any suggestions?
    Patrick

    Well if you can send emails, when you connect computer to modem directly, then it might be ports forwarding issue. Update firmware of router to latest version and assign a static ip on computer like 192.168.1.11, and obtain ports used by outgoing mail server, and forward those ports to static IP assigned, on router's setup.

  • New computer with vista, old computer with xp

    My old computer has xp and LV8.
    I just bought a new one with Vista.
    I have several applications that I programmed and I am wondering if they will work in vista.
    Any suggestions about partitioning and installing xp and sticking with it. Or what would I need to get applications built with 8.0 to work on a vista computer.
    Jim

    The first version of LabVIEW that is officially supported under Vista is 8.2.1. You may not have any problems with 8.0 but you will have to install all new drivers for any hardware you might be using (DAQmx, NI-VISA, etc.).

  • New Computer with VISTA 64 bit won't work with Palm OS on TX - no bluetooth

    I bought a new computer without researching the 64-bit vs 32 bit Vista versions and didn't discover until I had it up and running that I can't install the Palm Desktop on it.  My TX is only a couple of months old. I don't want to replace it and can't get a bluetooth adapter right now, budgetwise. What I want to know is: 1. Is ther some other work around than the clunky bluetooth one? and 2. Is Palm working on a 64-bit compatible version?
    Post relates to: Palm TX
    This question was solved.
    View Solution.

    ebullister:
    Before firing off an embarrassing rant, how about searching this forum for an answer first?
    You are asking about Palm Desktop, and the ability to perform a HotSync. You have replied to a post that is over three years old. We have a section of the Forum devoted to Windows HotSync named as such.
    In this section, you will find a post entitled "64bit Palm Desktop drivers are here". USB drivers have been around since April of 2011. Please read through this post since it provides an answer to your issue.
    Palm Inc. sold the rights to Palm Desktop many years ago to PalmSource, who then sold it to a Japanese company named Access. They were the company who you so eloquently described as the one to "screw users".
    BTW, Palm Inc. ceased to exist some time ago since being purchased by HP. Posting a complaint against a company that exists only in memory seems a bit pointless, no?
    Hopefully my reply can bring you up to speed, and enable you to sync your device.
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • Import iTunes Library from External Drive to New Computer with Vista

    I can't seem to "import" my entire iTunes library from my external hard drive to my new computer. However, I can import songs one-by-one. There must be a way to transfer the whole file at once but it is beyond me. Anyone have a solution?

    Hi I am new and have found a way to import Files & Folders over my home network and or other drives.
    Start in File, click "Add File to Library", or "Add Folder to Library". In the “look in” dropdown window, locate the File or folder and double click on it. It should begin to transfer. I have never transferred an enter library though.
    On a personal note,
    I have come to realize that I can only transfer iTunes music. I can not transfer or even find the music that I have installed from a CD into my iTunes library. iTunes dose recognize even the folder that such music is in. If any of you have an answer to this problem let me know.
    Thanks

  • Palm Treo 755p -- bought new computer with Vista and downloaded Download Palm Desktop by ACCESS 6.2 -- now the sync does not work, asks for drivers

    Hello...
    I am new to the Palm (~1mo.) but I was using hotsync with my old laptop which had Windows XP and was not experiencing any real problems.  That computer is going bye-bye, I bought an HP with the Vista OS and I followed the directions on downloading the Download Palm Desktop by ACCESS 6.2 from the website but now I can not get my device to sync-- The Desktop computer asks for the appropriate drivers.  I tried searching online, on the disk that came with the smartphone and even reinstalling a couple times and everything is dead in the water...
    Anyone able to help me out on this?
    Is there an additional patch of some sort to download?
    Post relates to: Palm m515

    Just in case it is not clear...  that post was made after I bought the bluetooth adapter and tried following the advice provided in the Vista 64 Hotsync solution found! post.  Again-- my statement of not working is for the following reasons:
    1) my PC tells me that the sychronization completed with errors.
    2) when I look at the log that the Backup sychronization aborted.
    3) It almost invariably tells me that it Failed to backup 1 file(s) and that file is "NetworkProfiles2" through a "Protocol Error: Unknown error. (6410)"
    4) many of my contacts (over half) duplicate during this synchronization.
    5) many of my appointments (over half) duplicate during this synchronization.
    The information about creating a virtual serial port on my PC comes from my actual palm itself.  The palm info is in the HotSynch verbage and it tells me to contact my computer manufacturer.  In doing so however they have no idea how to do this and Palm does not either.  I am still working with HP on trying to resolve that part of it but I am thinking from the hours of research that Palm wants me to create another COM port but again the help I am finding on this is beyond my pay grade so to speak...  you can check out the following link and try to help me if you like:
    http://msdn.microsoft.com/en-us/library/ms885792.aspx
    So... any ideas my friend?  It appears that some Vista 64-bit users are having success with a bluetooth synch but I have tried emailing those that claim to have been able to do this with no luck.  I am not having any luck (I hope my outline above is clearer)-- and no one has seemed to had any luck recently.
    I would love to make this work-- I bought this phone for this functionality.
    Post relates to: Palm m515
    Post relates to: Palm m515

  • Cannot Connect to new Installation with Admin Tool

    Have installed BPC 7.5 SP4 Patch 4 on Windows 2008 64-bit.  App/Web Server on one machine, SQL Server 2008 on 2nd machine,
    Everything seems fine except access via servername - servername used in all the settings.
    When trying to access the Administration to start installing new appsets, connect using ip address in admin tool and login using the software install user but will not verify user name/password.
    Does anyone have any idea of the issue?
    thanks
    Lesley

    In that case, I'd suggest you make sure both ethernet ports are unplugged from the RAID, power it off and on, plug a cable directly from a laptop to the RAID, set the IP of your laptop to 169.264.11.11 with subnet mask 255.255.0.0, then do "ping 255.255.255.255" and you should see a response from the IP address used by the RAID.
    This question is very common here... there are other threads where I've answered this so I won't clarify further here.

  • Cannot connect 6310i to computer with bluetooth

    Could someone please tell me how i connect my 6310i to my computer in order that i can transfer information from the phone onto the computer. I have tried and failed.
    thankyou

    Are you sure you installed the correct version of PCsuite for the 6310i?
    Also, you will need to have bluetooth enabled on both the phone and pc first. On first connection, you will have to pair the two devices first.
    Message Edited by cjlim on 18-Jun-2008 11:23 AM

  • I cannot get my new Computer with Windows8.1 to recognize myCanon Rebel XTi EOS 400 D camera

    I noted in a previous post that someone ,I believe from Canon , suggested to go to the menu on camera then to wrench, hammer, 2 setting and make certain changes there that should work to correct problem. My camera does not have the same settings they listed under the wrench, hammer, 2 so i could not try that. I have downloaded the latest software from Canon. Do I need to give up and buy a compact flash reader or is there a fix? It used to be so easy when I had Windows XP. Thanks for any help.

    "We still have a couple of XTi's kicking around at home ..."
    Bob from Boston,
    I had five (5) XTi's.  I used thme but not too often as they were the loaners for the 2nd shooters.  They have all been given away, now.  A couple went to the grandkids that I imagine still have them?
    I think I was on the 1D Mk II, or the Mk IIn, when they came out and I remember thinking it has more MP (10 I think?) than my 1 series did.
    EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
    EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
    Photoshop CS6, ACR 9, Lightroom 6

  • Setting up new computer with existing library

    Just got a new computer with Vista. Have current iTunes library on an external HD. (old computer running XP) Can I just plug the HD in and have all my playlists and settings? Or could someone point me where to find info to set this up? We've got 3 iPods running on this library and am hoping this is easy.

    See this recent discussion where I think I cover everything that may also apply to your situation as well. Post back with any questions...
    http://discussions.apple.com/thread.jspa?messageID=8259991
    Cheers,
    Patrick

  • HT1527 I have a new computer with windows 8 and cannot connect to itunes store, any ideas please

    Since purchasing a new computer with windows8 I am unable to access itunes store. My security is Norton. Please help

    When you save what kind of documents? Reader Touch or Reader XI do not create pdf files. There are all sorts of problems emailing pdf files. It recommended that you post a link to a pdf file save on the net and email the link.

  • I have a toshiba lap top computer with vista and I can not get my iphone to connect all the way .. it says "connected with limited activity"?

    I have a toshiba lap top computer with vista and I can not get my new iphone to connect all the way .... it says "connected with limited activity". which means I don't get on. Any help would be appreciated. Thanks.  

    Hi all,
    Guess I understand what is going on as I'm also experiencing the problem.
    Basically the issue is about the iPhone 4's personal hotspot.
    I'm trying to hook on personal hotspot to my toshiba laptop but it couldnt work as the connection is limited to local only without Internet access.
    The hotspot works well on other laptop and I-devices, but not my toshiba...
    Hope to get assistance here. Thanks

  • I have purchased a new computer with Windows 8.1 and the old computer had Windows Vista  and was very slow.   I need to uninstall Adobe Creative Suite 3 and put it on the new computer.  Is this possible and what do I need to do?

    I have purchased an new computer with the Windows 8.1 OS.  The old computer had Windows Vista and is just about to quit working altogether.  I wish to uninstall it on that computer and deactivate it; so that I may install the software that I purchased (some years ago, but hardly used) on my new computer.  Is that allowed and do I have the right idea about doing it?  I have the serial number
    and all that with the software.

    Download CS3 products
    Mylenium

  • How do I move all my settings from my old computer with Vista to a New one with Windows 7 ? I'm using V. 14.0.1 on both Systems

    Hello All,
    How do I move all my Settings & Bookmarks from my 5 year old Computer running Vista and Firefox V. 14.0.1 , to my New Computer with Windows 7 and also Firefox 14.0.1 ?
    Thank you very much.

    You can copy your Firefox profile from one computer to the other and continue working with almost no changes :)
    [[Back up and restore information in Firefox profiles]]
    A really easy way to do this is the following:
    #Click the Start button, type %APPDATA% into the search bar, press Enter (on your old PC)
    #Right click on the Mozilla folder, copy to a thumb drive (or something you can use to transfer it to your new PC)
    #Go to %APPDATA% the same way on your new computer
    #If the Mozilla folder already exists, I'd either delete it or rename it
    #Paste the Mozilla folder into the same place on your new PC
    #then upgrade to Firefox 15
    You can also use Firefox Sync. [[How do I set up Firefox Sync?]]

  • Hello i have purched new computer with windows 8 and cannot sync with my ipod nano

    hello I have a new computer with windows 8 and itunes works perfectly however it will not sync with either of our ipods.

    Hey azduck,
    Thanks for the question. I understand you are having issues syncing your iPod nano with iTunes for Windows. The following articles may help to resolve your issue, based on your symptoms:
    Windows
    iPod appears in Windows but not in iTunes
    iPod not recognized in 'My Computer' and in iTunes for Windows
    iTunes reports that "iTunes cannot recognize this iPod at this time"
    Additionally, you may find the following article helpful:
    iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
    http://support.apple.com/kb/PH12313
    Thanks,
    Matt M. 

Maybe you are looking for

  • How can I set my default email address for meeting invitations?

    As I was adding a friend's and my lunch appointment in my calendar, I noticed an option to invite attendee. So I invited her and she accepted successfully.  My question is that when I invited her, the invitation came from an alternate yahoo email add

  • Acrobat 9 Standard and Windows 7 Compatibility

    We are in the process of planning a migration of company computers to Windows 7 and Office 2010.  We have a large number of Acrobat users with various versions with many using v9, just upgraded last year.  Microsoft's "Windows 7 Compatibility Center"

  • File read and write operations

    how do use file read and write operations? can anyone give simple program?

  • Read metadata from file

    I have added GPS information to the metadata of several hundred pictures using software that came with my GPS. Photoshop Elements 8 is not recognizing the information becasue these pictures were already in the library. How can I force the system to r

  • Error Message; ORA-24372

    Can anyone tell me what this error message means and what I can change to possibly fix it. I am getting this error when SQL link is trying to reconnect to the database?? 'Oracle error ORA-24372', 'invalid object for describe while perfoming SP_Create