Cannot connect at a site, whereas other iPad users can? What happened?

I fail to find a network at a particular site while other iPad users have no problem connecting?
I have not encountered this before? Is this something to do with the 'forget this network' button, which I may have pressed trying to connect?
Help please!

1. No, bizarrely enough there is no search function in the Extensions page. Why, I cannot say, but it IS annoying.
2. Have a look in this folder
~/Library/Internet Plug-ins
Move anything that is in it to a Temp folder (e.g., create one on your desktop), restart Safari and test to see if that solves the problem.
If not, move the plug-ins back. If so, move each back one at a time and test till you figure out which one is the culprit.

Similar Messages

  • My iPad cannot connect to the app store but my iPhone can, what do I need to do?

    My new iPad cannot connect to the app store and iTunes after updates from several apps but my iPhone4s can. They were both recently updated to ios6. Whats wrong with this thing?

    So you are saying that after you updated several apps - now you cannot connect to the iTunes or App Stores?
    "My new iPad cannot connect to the app store and iTunes after updates from several apps"
    Go to Settings>General>Date and Time>Set Automatically>Off. Set the date one year ahead. Try to update the apps again. If you get an error message, go back to the settings. Correct the date and time (set automatically) then go back and try to update the apps again.
    Or try this ...
    Settings>Privacy>Location Services>System Services (swipe to the bottom of the page to find this)>Location Based iAds>Off.
    Or this ...
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • TS1277 I cannot connect to iTunes Store. Please help me find what happened.

    I can not connect to I tunes store. I can not purchase or update apps.
    Please help find what I'm doing wrong.

    I read on another discussion that apple are aware of the problem and working on a fix. I'm fed up with itunes I constantly have issues with it and it's not just me nearly everyone I speak to says exactly the same. Does anyone know of a decent alternative to it??

  • I cannot connect to iTunes on my iPhone but i can on my ipad

    Frustrated!!!!!!!! Getting " cannot connect to iTunes" message on iPhone but I can connect on iPad sitting beside the phone......  Tried the support site done everything please help.....

    Make sure you go into "Settings" on iphone and update things that need updated info, like icloud. Turn your iPhone off and on. Beyond that, good luck. I had to go into Apple store 40 mins away from me, they still didnt fix.

  • I cannot connect my Logitech keyboard to my IPad.  It worked well and now the Bluetooth device cannot 'find' the connection.  I have fully charged all batteries etc.  I may have said 'forget this device' how do I get it back again!! Help!

    I Cannot connect my Logitech keyboard to my IPad.  It has been working fine.  It may be that I highlighted 'forget this device' when using the IPad without the keyboard.  The Bluetooth cannot 'discover' the device.  All batteries fully charged.  Bluetooth lights up etc.  any ideas?

    Hey Montreal67,
    Thanks for the question. I understand that you are experiencing issues with a third-party bluetooth accessory. The following resource may provide a solution:
    iOS: Troubleshooting Bluetooth connections
    http://support.apple.com/kb/TS4562
    Thanks,
    Matt M.

  • "Configuration Manager cannot connect to the site" after site update from SP1 to R2

    Our dev SCCM environment only has a single primary site with a remote SQL database.  Initially, the dev primary site had SP1 Beta (5.00.7782.1000) installed but as everyone is aware there is no upgrade path available to SP1 or R2 from Beta; so, we uninstalled
    the site and removed the database, re-installed SP1 non-Beta (5.00.7804.1000), then proceeded to update all devices with the latest client agent.  Afterwards, we attempted to upgrade the site from SP1 non-Beta (5.00.7804.1000) to R2 (5.00.7958.1000).
     All seemed well until we attempt to open the Configuration Manager console and we get the following error message:
    Configuration Manager cannot connect to the site (Site Name)
    The Configuration Manager Administrator console could not connect to the Configuration Manager site database. Verify the version of the console is compatible with the version of the site server you are connecting to and then try to connect again.
    So we tried reinstalling the console directly from here...
    "C:\Program Files\Microsoft Configuration Manager\tools\ConsoleSetup\AdminConsole.msi"
    still the same error message persisted, so we tried installing it from here...
    "C:\Program Files\Microsoft Configuration Manager\tools\ConsoleSetup\ConsoleSetup.exe"
    still the same error message persisted, so then we tried installing it directly from the R2 (5.00.7958.1000) installation media, and afterwards the same error message persisted....
    All along, we were checking the AdminConsole log from here:
    "C:\Program Files (x86)\Microsoft Configuration Manager\AdminConsole\AdminUILog\SmsAdminUI.log"
    Here are the contents:
    [4, PID:4836][04/22/2014 15:21:10] :Property: 'Features'\r\nSystem.Management.ManagementException\r\nNot found \r\n   at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
       at System.Management.PropertyData.RefreshPropertyInfo()
       at System.Management.PropertyDataCollection.get_Item(String propertyName)
       at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlResultObjectBase.get_Item(String name)\r\nManagementException details:
    [4, PID:4836][04/22/2014 15:21:10] :ReadExtraProperties: Failed to initialize extra properties
    [4, PID:4836][04/22/2014 15:21:11] :Transport error; failed to connect, message: 'The Configuration Manager Administrator console could not connect to the Configuration Manager site database. Verify the version of the console is compatible with the version
    of the site server you are connecting to and then try to connect again.'\r\nMicrosoft.ConfigurationManagement.ManagementProvider.SmsConnectionWithDetailException\r\nThe Configuration Manager Administrator console could not connect to the Configuration Manager
    site database. Verify the version of the console is compatible with the version of the site server you are connecting to and then try to connect again.\r\n   at Microsoft.ConfigurationManagement.AdminConsole.SmsSiteConnectionNode.ValidateConnectionParameters(ConnectionManagerBase
    connection)
       at Microsoft.ConfigurationManagement.AdminConsole.SmsSiteConnectionNode.GetConnectionManagerInstance(String connectionManagerInstance)\r\nNo details are available for this error.\r\n
    Once again, we validated we could connect to the SQL database from this box, and that the console was at the same version as the site.  Any help or guidance with getting our access to the console restored after the SP1 to R2 upgrade would be greatly
    appreciated. 

    From the Primary Site Server, I tried uninstalling the Admin Console and re-installing using:
    consolesetup.exe /q TargetDir="%ProgramFiles%\Microsoft Configuration Manager" EnableSQM=0 DefaultSiteServerName=<SiteServerName>
    Of course replacing <SiteServerName> with the FQDN of my Primary Site Server.  Console installed successfully however the same error message persists.
    Also tried installing the console on a clean Windows Server 2008 R2 installation.  I tried it from the R2 (5.00.7958.1000) installation media, from the "C:\Program Files\Microsoft Configuration Manager\tools\ConsoleSetup\" both without any luck, the
    same error message persists.  I verified I could ping the FQDN of the site server also, and that the firewall between the two permits communication over the ports listed here: http://technet.microsoft.com/en-us/library/hh427328.aspx
    Any help would be greatly appreciated.

  • I suddenly cannot connect to any wifi with my ipad 1. In settings my wifi is turned on. My home connection shows up under Choose a network and has a strong signal.

    I suddenly cannot connect to any wifi with my ipad 1. in settings my wifi is turned on. My home connection shows up under Choose a network and has a strong signal. I have reset the Wifi under General. But when I type in my password it still says, "Unable to join the network."

    1. Turn router off for 30 seconds and on again
    2. Settings>General>Reset>Reset Network Settings

  • Can I share books purchased from Apple with other IPad users

    Can I share books purchased from Apple with other IPad users

    You can share them this way:
    Suppose you and the person you're trying to share with (I'll call her Jane) have two separate computers with two separate Apple IDs.  Each of those two computers have a current version of iTunes.
    You could copy your book from your version of iTunes over to Jane's.  How you do that depends on what types of computers you have, etc.
    So now your book is sitting in Jane's iTunes.  But you own the book, so Jane cannot access it.  What you have to do, then, is authorize Jane to access the book you bought.
    You do that on Jane's computer in iTunes by going to Store > Authorize This Computer in iTunes' menu.  Enter your Apple ID and password there.
    Then once Jane syncs her iPad to her iTunes, she will have access to your book.

  • Cannot connect to iTunes on iPad2 or iphone4s, I can on my pc

    Cannot connect to iTunes on iPad2 or iphone4s, I can on my pc?

    I am trying download and update apps.  Still get the same message: cannot connect to iTunes store. Online on my iPad now. Connection is good

  • I keep getting the message "mail cannot connect to the server-." when it clearly can and does. How do I prevent these messages from appearing?

    See the title
    I keep getting the message "mail cannot connect to the server…." when it clearly can and does. How do I prevent these messages from appearing?
    help

    On your iPad or a Mac?
    You posted in the iMac community but your profile indicates an iPad 2.

  • Get error message when trying to sync iphone to puter that says"cannot connect because apple mobile divise is not started? what do i do?

    get error message when trying to sync iphone to puter that says"cannot connect because apple mobile divise is not started? what do i do?

    Restart your computer and the iPhone. Press & hold the Power and Home buttons together for 10+ seconds, ignoring the red power-off slider, until you see the Apple logo. It is safe to do, there should be no content loss. It is the same as rebooting your computer.

  • Error message when connecting to iTunes says my new iPad 4 can't be connected as it requires version 10.7 or later. Surely a new iPad already has the latest version, and if it doesn't how do I get it?

    Error message when connecting to iTunes says my new iPad 4 can't be connected as it requires version 10.7 or later. Surely a new iPad already has the latest version, and if it doesn't how do I get it?

    Not the iPad - your computer must be running iTunes 10.7 in order to sync. It has nothing to do with iTunes on the iPad.
    You can download iTunes for your computer here.
    http://www.apple.com/itunes/

  • I lost all data in "notes" on both my iPod Touch and my new Ipad within minutes of each other.  How can this happen?

    I lost all data in "notes" on both my iPod Touch and my new Ipad within minutes of each other.  How can this happen?

    Where were the devices doing since the content was there and when you found it missing?
    DId you power it off ond then back on?
    Did you reset the iPod?
    I would try resertting the iPod. Noting is lost.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.

  • When i enter appstore its keep telling me "cannot connect to itunes store(No such file or directory) what should i do????

    when i enter appstore its keep telling me "cannot connect to itunes store(No such file or directory) what should i do????

    Hi mhmd.h,
    There was a very recent update to the entire Apple website. 
    If you are still unable to connect to the App Store from your iPhone, please post again.
    - Judy

  • Hi! At connection to iTunes the section "other" constantly increases. What's the matter? How to avoid it? On phone music isn't necessary, video too isn't present. But another grows. How to correct it? I know only one method, it to dump all settings and a

    Hi! At connection to iTunes the section "other" constantly increases. What's the matter? How to avoid it? On phone music isn't necessary, video too isn't present. But another grows. How to correct it? I know only one method, it to dump all settings and a content.

    http://discussions.apple.com/docs/DOC-5142

Maybe you are looking for

  • Password reset problems in planning and shared services

    We had all our repository passwords expire today(by some default).We had to reset them(and set them to not expire!). According to the epm 11 admin guide, we have to reconfigure database for all applications using the config tool-which we did. Now in

  • Sync wont work on the ipod?

    im trying to sync my ipod and it wont sync ALL of my podcasts. why?

  • How to Remove Mac OS X Games from GameCenter?

    I've uninstalled a game from my mac, but how do I remove the MAC OS X game from gamecenter? (Not ios)

  • Entering numbers into textfield

    Hi, is there any way of entering numbers into a textfield whereby the user doesn't have to toggel the device inorder to produce said numbers- a bit like a calculator application; any suggestions welcome James

  • Crash on closing docked scriptUI panels

    My system is crashing every time I close a ScriptUI panel that is docked using the little 'x' next to the Script name.  If I undock the panel so it's a floating window and then close it, everything is fine. If I use the dropdown menu and select 'Clos