Cannot connect E71 using Wlan

Hi,
Since I have purchased E71 I have never been able to connect via Wlan. Are there any advance setting to be done.
Wlan get detected on the phone but when I try to browse using the access point it says cannot connect.
Thanks,
Sameer

Hi,
which security settings, you have enabled on your hotspot ?
Whcih WLAN standard is used (b\a\g\n) ?
What Router is used ?
Guess we need to have this information to help you out further.
Br, Oliver

Similar Messages

Cannot disable internet connection and use wlan co...

hi i have download skype and i cant use it with my wlan connection because its already connected with internet and i might get charge for using this service could you please tell me how to disable internet and use wlan connection when i am in home
my handset details are
its made in hungary software version is v 11.0.0.029 software date 11-08-10 rm612
and there is no update availabe for my handset at the moment

It sounds like you are using an unsupported App like "Jailbreak" which technically voids the warranty on your iPhone. Your call on that.
If so, the app creates an "ad hoc" wireless network which the Airport Express cannot join or participate in. So, you cannot use both the AirPort Express and the "modem" function of your iPhone at the same time.
You should be able to turn the app off and log off the internet, and then setup another separate wireless network to run AirTunes, or AirPlay. But, you'll have to "switch" wireless networks to be able to do this and the network will of course not have access to the Internet.
Message was edited by: Bob Timmons

TV on the E71 (using WLAN)

Hi everyone...
I am looking for a good 'streaming' TV application on the E71.can anyone recommend one ?
I have tried the following :- FreeBeTv but it installed on the E71 then complained of not having an 'sccess point' set up and didn't run, so I had to remove the application !! I think this could be because FreeBeTv needs a GPS connection...
I am running my E71 purely on Wifi so I need a TV application that runs well on a WiFi link..
Can you sugget one please ??
Thanks
Harry

I have been using an application called Live TV by Vimio. It gives you a choice of very few channels but, it works!. You can download it from here:
http://nokia-e71.net/2009/02/12/e71-download-watch-free-internet-tv-on-your-nokia-e71/
You can also try this other application
http://nokia-e71.net/2009/03/07/how-to-watch-tv-on-your-nokia-e71-using-hulu-hulu-for-nokia-e71/
-Sujit

E72 - cannot setup email using WLAN

Hi,
I cannot setup any email account using a WLAN connection. It keeps directing me to the network connection. Is there a way around this?

I've faced the same problem and it is annoying!
I couldn't set up my emails through my WLAN connection. I have always a WLAN access point(in home and in my campus). I don't need any GPRS(or say 3G) connection but just for that problem i purchased a weekly connection package. I checked the priority settings but I couldnt. Nokia should take an action about this
My Nokia history:
3110-3210-3310-3330-5210-6110-6210-6630-5510-1600-6330-E50-E55-2690-E72

I just got an iPad 2 16 gb and was wondering how I can upload pictures from a micro sd card but my iPad is saying cannot connect device using too much power. I have tried a 16 gb micro sd card and 4 gb micro sd card. Can anyone help please??

I got an iPad 2 and I cannot get my pictures to upload from a micro sd card as the iPad is saying device not accepted using too much power. Can anyone help? My iPad 2 is a 16 gb and my micro sd card is 4 gb

You can use a USB flash drive & the camera connection kit. First download the pics to your computer.
Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov).
Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import.
 Cheers, Tom

Cannot connect devices using Extend Network via Ethernet

Hi
I have been going nuts with this issue, and cannot seem to find any solutions. PLEASE HELP!
I have an Airport Extreme (pretty new and all up to date) connected to my modem. Everything works perfectly. The wi-fi is great, all devices can connect without any issues so nothing is wrong here. The Airport extreme is dishing out the IP addresses etc. The Airport extreme is in the lounge.
I purchased a new airport express yesterday. I put it in my study, far away from the lounge. I connected the airport extreme to the airport express using an ethernet cable. I plugged it in, and set it up to extend the wireless network via ethernet. I.e. it is set up in bridged mode and set up to 'create a wireless network' with identical name password etc. Everything is good. It reboots and the light is green. in the Airport utility everything shows up correctly.
Here is the problem., The second that any device (lets say iphone) moves from the lounge to the study, and tries to 'jump' to the stronger network provided by the express, it kills the ENTIRE network. The following happens:
1. The iphone loses wi-fi signal immediately. If I go into wi-fi settings, it sees my netwrok with FULL strength, but just remains in the 'spinning ball' state trying to connect. Seems to me that the express is unable to hand out an IP address or something.
2. If i open the airport utility on my Imac (in the study), the airport extreme has a yellow warning light and cannot be found via ethernet OR wi-fi. (The Imac is also Hard Wired from the Airport extreme in the lounge).
THe whole system requires a re-boot in order to work again.
If I re-boot the system, and leave a device near the airport express, it immediately receives signal, gets an IP address, and has an internet connection. Going back to the lounge causes no issues, it doesnt drop signal and still connects to the internet via the extreme. But as soon as I walk back into the study again - BOOM, everything drops.
I only purchased the new express because i was having EXACTLY the same issue with an older Airport extreme. No matter what I do, it just wont work via ethernet. I have tried all manner of settings. The ONLY setting that seems to work is to extend the wi-fi network. However, the rooms are too far apart, and this will require a third station in the middle, which i want to avoid (by the time the wifi network is extended across 3 decvices it is too slow).

Can I use airport express to make my pc pick up the wifi by plugging the pc into the ethernet socket?
Yes. But, it is the AirPort Express that would "pick up the wifi". Then, you would connect an Ethernet cable from the AirPort Express to the PC.
Configure the AirPort Express to "Join a wireless network" and click the option to "Enable Ethernet clients" during the setup to activate the Ethernet port on the device.
I would also plug a printer (currently connected to the pc) into the usb, so it can become a shared printer.
There is a good chance that your printer will work connected this way, but you won't really know until you try.

Cannot connect stereo using bluetooth

it runs great using bluetooth to connect my stereo and iphone/ipad/ipod. However, it doesn't work for my macbook. I can find my stereo bluetooth device and the connection is successful. However, there is no sound and then the bluetooth kick my macbook out. Also, there is the message on macbook that "error....."
What should I do for this issue?
I am using 10.6.8
Thank you,
Pipat

Hi,
Frist u need to open Media in the BB open Menu, select Receive Using Bluetooth. I your PC select file you want to transfer, then right click Send via Bluetooth.. In your phone select file to SAVE.
Hope This Will Help.

Cannot connect adsl using rp-pppoe and ppd

Anyone is successful in running pppoe under solaris 8 ?
I tried hard and complied pppd,rp-pppe using gcc at last,
everything is fine until I try to connect using adsl-start, it just "timeout" without success.
I 'm using a realtek chipset based NIC using its beta driver in its web site, the driver seems to be ok as I can ping other machine, the catch is I have to ping those machines first before they can ping my system.
Please comment everyone

Reply to gonwg.
Solaris was never intended for home usage. It is an industrial strength UNIX SVR4 operating system. It is probably one of the most scalable operating systems out there and as such Microsoft can't compete there. Granted it may not be the prettiest operating system anybody could use, but that really doesn't matter because it was never designed to be a Wintendo with mailers that graciously accept all kinds of virii and so forth. Solaris has its problems, but what operating system doesn't?
Sun doesn't assume that its users are experts. But then again that is a matter of degree. You're probably a Windows expert in comparison to me. =)
You should install Solaris and play with it. Lots of places use Solaris every day and even if you don't end up working as a system admin with Solaris, you are still learning something new. To me that is very important.
If you can't install it, you obviously can't learn much about it. What types of installation problems are you having? Why don't you post those and I'll promise I'll give it a shot trying to help you out.
It's a free country and you're free to choose any operating system you want. If you want Windows XP, you should use that. Myself, I use various UNICES because I find them to be easier to administer and much more comprehensive. I can give you an example... I work with sendmail a lot and I curse over that LookOut mailer all the time. Not once have I seen it give a decent error message actually telling me what's going on. I end up having to go through logs to figure out what is happening and then fix the problem. It isn't a huge issue, but a major inconvenience. Just about every other mailer out there can give the user an error message that they can relay to their support staff. Right now there are Windows 2000 machines on the network at work. It is virtually impossible to get them to play nice with Solaris. Why? Because Microsoft wants me to use their stuff so they make incompatible. That doesn't impress me at all, so I am actually trying to migrate more clients TO Solaris than from Solaris.
I wish you well with your endeavors to install Solaris and learn a new operating system.
Alex

Could use facetime in UAE updated to IOS6 and now cannot connect, could use facetime in UAE updated to IOS6 and now cannot connect

Could use facetime on ipad 2 in UAE, then updated to IOS6, now everytime I try ft it can't connect! I have tried resetting everything but still it seems a lost cause.

Same problem with me on my Ipad 2, intially on my UAE ID even Imessage was not working, got the error wrong password, after changing my Apple account which I had in USA Imessage works but Facetime calls but gets stuck in connecting for several minutes and than stops. ? Please help, most likely an issue with Etisalat but its unfair on us apple customers..a very important reason for buying Ipad was facetime

Installation problem: Cannot connect to TV

Hi,
I just got my new AppleTV. Connected it to a Panasonic TV via HDMI and then with the power cable. The problem is that the TV stays black. AppleTV is responsponding to the remote (when I press a button, the light on the AppleTV is blinking).
I tried to use the "menu and + button for 6 sec" to change the HDMI resolution. No change. TV stays black.
The remote by the way is fully working since it my MacBook is reacting and it starts FrontRow. Another thing: I have startet "Airport Application" to try to find the AppleTV - does not find it. But I assume this is because AppleTV is not yet configured, hence not connected to any network...
By the way, the TV hdmi is working (had another source on it), because I had another source on it before and it is fine.
I switched off already both, TV and AppleTV. Still the same situation...
Can anyone help me? I have no idea what to check anymore.
Pls advice!
br
a

Hi,
thx:)
You were right! I changed to another cable. Now I have a picture!
How come, that the cable works with a DVD player and not with AppleTV? Sounds rather strange to me. What do I need to look at to know whether a cable is compatible with AppleTV?
And now I have the next problem. I cannot connect to my WLAN. By the way - there were no issues at all in connecting my MacBook with the WLAN. I am using WEP security with an HEX password. However, AppleTV let me only choose from the Options "WEP Password", "WEP 40/128-bit Hex", "WEP 40/128-bit ASCII". It works with non of the options. The password is for sure correct (I use it on several devices, also on MacBook). I get error code "-3" when I use the first 2 Options and "-6" when I use the last one and the first one with letters from my password written large. I know that the pwd is case sensitive, and actually I use letters from "a" to "d" in my password. Again, no problem on MacBook.
And again, I would be glad to get your input! I want to show off my new device with the family today - Easter Photos:)
Thx folks and br
A

HP 6500a Plus cannot connect wirelessly

Hi,
Just bought the HP6500a Plus and understand that this printer is having problem with the constant wireless connection. I am having the same problem and changing the IP address occasionally solve the problem but not alway and it also create problem which cannot access to webapps or ePrint because I change the IP address and also put 0.0.0.0 in the gateway address.
My problems are as follow
1. My Mac Pro running Lion cannot constantly connect to 6500a even the IP address changed to out of range IP address and pti 0.0.0.0 in gateway address.
2. After changed, the web apps cannot access and cannot access ePrint too.
3. Airprint from iPhone cannot detect the printer consistently.
I am thinking to return the product but the 8500a also having the same problem.
Please let me know any good solution. Thanks.

Hello snakehollywood,
Welcome to the HP Forums!
I understand you cannot connect wireless using the Deskjet 3050A. I will do my best to assist you! I would start off by following this entire HP document on 'Unable to find printer' Error Message Displays on the Computer During a Wireless Network Installati...
Make sure you do disable the startup programs and services on your computer. Please post your results, as I will be looking forward to hearing from you. Have a great day!
I worked on behalf of HP.

Cannot connect to SQL Azure

Hello,
I have tried everything I could think of and still did not manage to connect to SQL Azure server instance I have created.
1) Using the SQL Server Management Studio 2008 R2 -
    I get: "A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. ...."
    I have the 1433 port allowed by my firewall (even placed a machine in the DMZ) and I have added my IP address to the SQL Azure firewall.
2) Using this app: https://onlinedemo.cerebrata.com/SQLAzureClient/default.aspx
   I get "Unable to retrieve the list of databases...."
   Now, in this case enabling the TCP port 1433 from my network is not even required as I this tools connects directly to SQL Azure. And yes, I have added the firewall rule on my SQL Azure Server.
3) Using this tool: http://hanssens.org/tools/sqlazuremanager/
   I get a message similar to what I get at 1)
The only thing that works is the "Test Connection" performed on SQL Azure site.
Can someone please help?
Regards,
Luc

I cannot connect either using that Omega tool but I have no problem from SSMS R2.
Let's try something simple: connecting from Project Houston:
Check "Allow Microsoft Services access to this database"
Go to http://sqlazurelabs.com. Click Project Houston CTP 1 on left.
When asked for data center, click the one where your db is deployed.
Agree to terms
Enter full database name - somename.database.windows.net -
along with database name, username, and password. Note: if you didn't allow Microsoft Services access to your database, you'll get an error
You should now be connected to your database.
If that worked, at least you know your database is up and running correctly. Now try connecting from SSMS R2. The parameters should be identical,
except you don't have to specify which database to connect to.

My E71 uses WAP even when a WLAN connection is ava...

I'd like to set it so my phone ALWAYS uses WLAN if available and only ever uses WAP when there is no WLAN connection.
It's a new phone (to me, anyway) and I'm still getting use to the settings.
It's an Eseries E71.
Thanks!
Solved!
Go to Solution.

Go to Web > Options > Settings > General > Access point - does it currently say "User defined" or "Ask on connection"? If says the former change to "Ask on connection" and then back to "User defined" to give you opportunity to choose WLAN access point.
Another way is to install SmartConnect by Birdstep form Nokia Store: http://store.ovi.com/content/10328
Happy to have helped forum in a small way with a Support Ratio = 37.0

Cannot connect to WLAN on E63

Hi,
I had my home network setup sweet for a while but then my phone started dropping the connection like crazy. One second I could go to a webpage and then the next it would say WLAN not found. Keep in mind this was literally 10cm from the wireless router.
Now at work I tried connecting to the WLAN after following a very comprehensive guide put together by our IT department with all the required details. I also downloaded the required certificate and opened it (selecting all 3 of the options that come up, whatever they were).
Another person at work has the E65 and they connected fine. I have attached the settings I used in case you can spot something wrong.
Cheers
Attachments:
ESeries WLAN Configuration.txt ‏1 KB

My problem is like Harry (whose question I think was answered by cjlim). I have an E63 which I purposely I have do not have my SIM in, as I wish to use it, a) to answer SKYPE calls around the house which I work from thne b) I'm going to transfer my agenda from my PSION 5MX/Outlook and then c) convert the many data files from it, but first the wireless link. Now I have taken out my SIM, I can see my wireless link is recognised but as soon as I move to say Bookmarks etc I get I cannot get say SKYPE to work as it tells me unable to use Network. Phone is in offline mode. Has anyone any suggestions, have been through some of the other areas of the forum, this seems close to my problems! Cheers beecee

After connecting to the WLAN I cannot go to the internet

Help pls
After connecting to the WLAN I cannot go to the internet. Why???

What is the model no of the router..?
Who is your ISP..?
Are you trying to configure the router using computer to get internet..?

Cannot connect E71 using Wlan

Similar Messages

Maybe you are looking for