Cannot connect iMac & Mini through network
iMac & Mac Mini will not connect through wifi network. Rang broadband company & they said they can't help!
iMac 10.6.8 Snow Leopard 21.5inch screen (late 2009)
Mac Mini Lion (early 2012)
I don't think the operating systems would cause a problem.
Sharing settings on:
DVD & CD
Screen
File
Printer
Internet
Please can someone give me some advice.
Thanks in advance.
Very sorry, I added it to the wrong topic! Must see if I can change it...
Yes it's file sharing & CD/DVD sharing.
Thanks for your reply.
Similar Messages
-
I installed Mountain Lion on my iMac. Now I cannot access the Internet. All the other computers and tablets on the network have no problem. I did PRAM and MC reset, modem reset, etc., all the usual ju-ju. I also cannot connect on my local network to any other computer. Yet Network control panel says I am connect to the modem, and Network Diagnosis says I am connected to the Internet. It's like the blind man who has eyes that cannot see. BTW, I am not some newbee. I have been a Machead since the early nineties and set up a half dozen networks, including the one I am using at home to which the iMac mysteriously is there but not. This has me stumped! I am considering going back to 10.7!
Select ▹ System Preferences ▹ Network ▹ Advanced ▹ TCP/IP. What values are shown for the following:
Configure IPv4
IPv4 Address
Subnet Mask
Router -
I keep getting the error 306 cannot connect to the iTunes Network when downloading songs on iTunes. I've tried all the troubleshooting steps from the forums and my technical issues are still unresolved. I have Windows 7. Please help!!
iTunes Store loads partially or returns "Error 306" or "Error 10054"
Proxies, parental control settings and software, security or filtering software, or a bad iTunes Store cache can cause this.
To address proxies, Remove Internet Options proxy settings ( http://support.apple.com/kb/TS1490 ) and connect to the Internet without a proxy.
To reset iTunes Store cache:
In iTunes, choose iTunes > Preferences (Mac) or Edit > Preferences (PC).
Click the Advanced tab.
Click the "Reset cache" button.
Click OK and see if the issue is resolved.
Adjust Parental Controls in iTunes:
Open iTunes.
Access iTunes preferences:
On a Mac: From the iTunes menu, choose Preferences.
On a Windows PC: From the Edit menu, choose Preferences.
Click the Parental Controls tab.
Remove restrictions on Parental Controls.
For more information on parental controls or content filtering software, see iTunes 10.5 for Windows: May see performance issues and blank iTunes Store.
http://support.apple.com/kb/TS4123?viewlocale=en_US -
I have two networks one each in two cities. Both are named the same but require different passwords. I am at my second location and cannot connect to this wifi network. How do I delet one network so I can connect to my second network?
Just go to the wireless network preferences and empty out all the stored wireless networks.. then scan and connect to the local wireless.
Select them and tap the - button below it.
Once they are emptied out.. it might be good to reboot the computer with the remember networks unchecked.
Start with a clean slate. -
Cannot connect to the wireless networking
My Toshiba Laptop was preinstalled with Windows 7 Home premium 64-bit OS, and it had been working quite well with the wireless BB. However, the wireless internet connection was on and off within recent weeks, while the other mobile devices, such as iphone, ipad, or laptop, in my household had no such problem. The wireless signal was so strong, but the error message always said 'Windows cannot connect to the wireless networking'. It seemed there was something wrong with the wireless adapter.
I got a new TP-Link wireless adapter properly installed. Luckily, this worked; but unluckily, this worked for less than 24 hours. It was really frustrating that I, as a full-time student, depended so much on wireless networking.
Please help!!! HarryHi there
You may want to enlighten us with:
- What model are You using (f.ex. L300-123)
- What BIOS version is installed?
- What WLAN driver are You using?
All these questions are answered in PC Diagnostics found under Toshiba app folder in the start menu.
BR
Tom -
Cannot connect to VPN through NetworkManager anymore.
I cannot connect to VPN through networkmanager anymore. Last time used it, it worked perfectly but I don't use it so often and last time was 2-3 months ago. So I don't know what went wrong, or which package upgrade broke it.
I switched to systemd a month ago, it may or may not be related.
I can still connect from the commandline using the vpn/vpn-disconnect tools.
All that happens is an alert windows saying: "The VPN connection '......' failed because there were no valid VPN secrets." And here is the journal:
NetworkManager[355]: <info> Starting VPN service 'vpnc'...
NetworkManager[356]: <info> VPN service 'vpnc' started (org.freedesktop.NetworkManager.vpnc), PID 9214
kernel: tun: Universal TUN/TAP device driver, 1.6
kernel: tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
NetworkManager[356]: <info> VPN service 'vpnc' appeared; activating connections
NetworkManager[356]: <error> [1349687970.426748] [nm-vpn-connection.c:1405] get_secrets_cb(): Failed to request VPN secrets #3: (6) No agents were available for this request.
NetworkManager[356]: <info> Policy set 'MYSSIDOMITTED' (wifi0) as default for IPv4 routing and DNS.
NetworkManager[356]: <error> [1349687973.943758] [nm-vpn-connection.c:1405] get_secrets_cb(): Failed to request VPN secrets #3: (6) No agents were available for this request.
NetworkManager[356]: <info> Policy set 'MYSSIDOMITTED' (wifi0) as default for IPv4 routing and DNS.
NetworkManager[356]: <info> VPN service 'vpnc' disappeared
All neccessary vpn packages for networkmanager are installed.
Google did not turn up any useful info other than a few year old threads saying "upgrade your networkmanager".Well, I managed to get the auth dialog to show up reliably by applying a couple patches from this Bugzilla: https://bugzilla.gnome.org/show_bug.cgi?id=679212
Still getting breakage in that it's not properly authenticating:
Attempting to connect to redacted:443
Using client certificate '/CN=redacted'
Client certificate expires soon at: Dec 5 02:57:05 2012 GMT
SSL negotiation with somesite.somedomain.com
Connected to HTTPS on somesite.somedomain.com
GET https://somesite.somedomain.com/
Got HTTP response: HTTP/1.0 302 Object Moved
SSL negotiation with somesite.somedomain.com
Connected to HTTPS on somesite.somedomain.com
GET https://somesite.somedomain.com/+webvpn+/index.html
GET https://somesite.somedomain.com/CACHE/sdesktop/install/binaries/sfinst
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Failed to read from SSL socket
Error fetching HTTPS response
This behavior is not what I'm getting from the command-line client, of course, so... still digging. -
For some reason the wifi prefrence that is usually in the tool bar is not there. so therefore i cannot connect to any wifi connections
System Preferences, Network, then Turn it on:
-
Connecting iMAC mini to HDMI imput of my monitor
I have an 22'' Asus monitor with 3 inputs (VGA, DVI and HDMI) and connecting my iMAC mini to DVI input (through HDMI->DVI adapter) all works perfectly. But connecting it directly to HDMI input of my monitor, using HDMI-HDMI cable - the image is very unclear: especially this is remarkable for texts...
Any idea?dumitru wrote:
I have an 22'' Asus monitor with 3 inputs (VGA, DVI and HDMI) and connecting my iMAC mini to DVI input (through HDMI->DVI adapter) all works perfectly. But connecting it directly to HDMI input of my monitor, using HDMI-HDMI cable - the image is very unclear: especially this is remarkable for texts...
Any idea?
My guess maybe that when you connect via the DVI port on the Asus, the Mac mini is correctly detecting the resolutin and setting it self to match. However when connecting via HDMI it is not chosing the same (best) resolutuon. Can you do the following to help diagnose this.
On the Mac open System Preferences
Select Displays
Make sure show in menu bar is enabled (ticked)
Now go to the Displays menu in the menu bar it should show the current resolution
Repeat step 4 for both the DVI and HDMI connections, we want to see if they are the same or different. -
My iPhone 4s cannot connect to my home network, can't figure out why...
My phone recognizes my home network but cannot join it. I have tried the option to forget the network and then gone back in and retyped in the password, but it just keeps spinning in a circle trying to connect to my home network, but never connects?
Both my iMac and Macbook have no problems being connected to the same network.
Any thought on what the problem could be?
ThanksHave you tried to reset all network parameters? It may help.
Preferences > General > Reset > Reset Network Settings
Careful, DO NOT PRESS the other ones by mistake. -
Cannot connect to printer on network
I recently moved house and want to recconect my wireless printer (Epson WorkForce 845) to my new network. My iad and iphone see the printer on the new network and print fine, so i know it is not a printer issue. Howeve my imac cannot connect to the printer. In Printers & Scanners, I have tried removing and ading back the printer. The problem is that the default printer only offers ""last Priner used or "Epson WorkForce 845". Selecting either fails to print and gives a "Stopped - 'Filter' failed" message.
I am having the same problem on our home network. Have enabled printer sharing on the mac and the PC but the mac does not "see" the printer hooked up to the pc.
-
Cannot connect to the secure network but can to the guest network
I have three computers in my home, all Apple. One is an iMac with 10.5 installed, another is a powerbook g4 17" with 10.5 installed and the third is an old titanium powerbook g4 15" with 10.4 installed. All of them have the newest versions of software.
I just bought a new time capsule and that has the newest firmware upgrade installed. I set the time capsule up with a secure WPA Personal network and a guest network with no password. I can connect to the secure network on the iMac and the 17" powerbook but the titanium powerbook cannot even see the secure network or connect to it if I enter it and put in the correct password. However the titanium powerbook can see and connect to the guest network.
Please help, I need to be able to print from the titanium powerbook to an ethernet printer connected to the time capsule.
I've tried adding a wireless client with no password in airport utility thinking I could connect the titanium powerbook that way and that does not work either.Actually I have figured it out. I guess the titanium powerbooks cannot do WPA encryption, only WEP but I cannot choose WEP in the airport utility nor do I want to. I did find a work around though.
In airport utility I went to the base station menu and clicked on "equivalent network password" and it shows the WPA password and then something called "WPA Pre-Shared Key". The key is a 64 character password but I tried it on the titanium powerbook and it worked! -
Cannot connect macbook to wireless network
Hey, I wonder if someone can help? I live in the uk & want to connect my nephew's macbook to his home wireless network.
His network is run off a Windows based pc, I have read in the forums that this is ok. He has a rather old pc that has no wireless card so I have installed a Netgear usb adaptor which runs just fine. The pc can "talk" to the Orange Livebox (Livebox -3660) and the pc can connect well, to the internet via the Livebox. So I have a stable internet connection.
The problem is that we cannot get the macbook ( a few months old only ) to connect at all to the net!
On the macbook there is no signal reading at all, airport is scanning for a network,it finds Livebox-3660 ok but when we enter the password the macbook says cannot connect!
Its curious that there is no signal reading at all on the macbook, yet it is right next to the livebox?
When I take the macbook home to my house, it connects immediately to my imac....full signal no problems. All systems go...
I must be missing something obvious ?? The security set up is currently WPA-PSK I dont know if this has a relevance? should I change this to make it more compatible to WPA2 ??
Much appreciate the help of the good people on this forum.
Thank you in advance. WSorted it!
-
Yet another iPhone WiFi thread - cannot connect to some OPEN networks
I make no apologies in starting another thread about iPhone WiFi connectivity. Judging by the number of references to WiFi issues in this forum, as well as on the Internet generally, this is a big issue with many users and yet there seems very little acknowledgement by Apple that there is problem.
In my case I have a first generation iPhone which works well on most WiFi networks, both open and closed, including my secured network at home, but cannot connect properly with some open networks. I have had this problem while using 1.0, 2.0 and 2.1 firmware.
Sometimes I get the "Cannot Connect ..." message and sometimes I am able to connect and obtain a good signal and see an IP Address and a Subnet mask, but no Router or DNS address.
I'll repeat that I talking about open networks, so there is no password issue. In one local cafe, I am unable to connect to a network that I used to be able to connect to routinely. I have talked to the owner, who is another Mac and iPhone user and he assures me that he has not changed any router settings.
Can anyone offer any suggestions beyond the usual re-setting and re-booting options? Is there something about iPhone MAC addresses or the WiFi signal that certain routers don't like?
SimonThis is not a solution to your problems but:
1- Expecting someone from Apple to respond here is a vain hope. This is a discussion forum for users and you can only expect responses from users. Talk to Apple tech support if you want a response from them.
2- I saw an item on an iPhone blog page somewhere yesterday saying that Apple was now replacing iPhones with this issue if you took it to an Apple store. Don't know if it's true but it also had a workaround that you could use for your own home network if you were having problems—and I am—and that workaround basically worked for me.
I turned wi-fi off on the phone and opened Airport Utility on my iMac. I turned wi-fi security OFF and then tried to connect. I actually got a connection straight away, and I noted down the IP addresses and subnet mask data from the DHCP screen in the iPhone's wi-fi network info screen. I then restored wi-fi security on my iMac. Of course that restarts the router and I lost my connection and when it started up again, the IP addresses had changed but the subnet mask had not. I swapped to the Static screen instead of the DHCP screen and edited all 3 IP addresses. That got me my connection back and it has continued to work throughout today. That's the best result I've had so far.
It seems to me that my iPhone has problems picking up the network data from my home network and I don't know why that is. I was at a friend's last night and tried to connect to his system and it connected straight away. I assume there's something about my settings which is problematic but I don't know what it is but at least now I have a workaround.
It's possible that something similar is going on for you with the public networks you're having problems with but, unfortunately, the workaround I tried won't work for you in a public network so that's probably not much help.
You could try taking your phone to an Apple Store and seeing if they exchange it. The blog I read suggested the magic words were "hardware problem". In my case I don't think it's a hardware problem but it may be in yours. -
MacBook Pro cannot connect to a wireless network
I am having the following problem with my MacBook Pro trying to connect to a wireless network using a 2WIRE Gateway wireless Router from Bell that worked perfectly until last night. My network preferences pane is saying "AirPort has the self-assigned IP address 169.254.227.XX and will not be able to connect to the Internet." I'm not a techie and I've tried everything I know and cant get my MacBook to connect to the internet using the wireless network in my home. I'm using ethernet connected directly to my router for this! It's killing me. Any help would be greatly appreciated.
Thanks in advance.OK. The wireless network was selected. In the Preferences / Network pane I removed Airport by selecting it and hitting the - button and then created a new Airport by hitting + and selecting Airport. I'm getting the same result. Full network signal once the ethernet cable is connected. Greyed out icon with ! once I remove the ethernet cable and no internet. I appreciate your help so far. Any other thoughts? We also have an iPad, iPhobe, iPod, and two iMacs on the same network. All of them are connected no problem. My Macbook also still connects to the network in my workplace no problem. This all just started happenening yesterday and I don't believe I changed or upgraded anything. I just came home and it had stopped working.
-
Cannot connect to printer over network from Linux
When I run hp-setup, I can get the printer listed but it appears to refuse to communicate with the device. Same problem for wired ethernet as well as wireless.
Please help, I think I have tried everything by now...
Firewall disabled on the workstation does not help. Talking to the printers web interface (:8080) works perfectly. The printer works perfectly via USB. Also works fine from another windows PC (networked)
System:
Linux Mint 17 - X86_64 (up to date)
uninstalled the mint hplip package and installed the latest from HP manually....
hp-setup
HP Linux Imaging and Printing System (ver. 3.14.10)
Printer/Fax Setup Utility ver. 9.0
Copyright (c) 2001-13 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Searching... (bus=usb, search=(None), desc=0)
error: No devices found on bus: usb
Searching... (bus=net, timeout=5, ttl=4, search=(None) desc=0, method=slp)
error: Unable to communicate with device (code=12): hpfax:/net/HP_Officejet_Pro_8620?ip=192.168.1.32
error: Unable to communicate with the device. Please check the device and try again.
Done.
hp-doctor output:
> hp-doctor
HP Linux Imaging and Printing System (ver. 3.14.10)
Self Diagnse Utility and Healing Utility ver. 1.0
Copyright (c) 2001-13 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Checking for Deprecated items....
No Deprecated items are found
Checking for HPLIP updates....
Latest version of HPLIP is already installed.
Checking for Dependencies....
| SYSTEM INFO |
Kernel: 3.13.0-24-generic #47-Ubuntu SMP Fri May 2 23:30:00 UTC 2014 GNU/Linux
Host: stargate
Proc: 3.13.0-24-generic #47-Ubuntu SMP Fri May 2 23:30:00 UTC 2014 GNU/Linux
Distribution: linuxmint 17
Bitness: 64 bit
| HPLIP CONFIGURATION |
HPLIP-Version: HPLIP 3.14.10
HPLIP-Home: /usr/share/hplip
HPLIP-Installation: Auto installation is supported for linuxmint distro 17 version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.14.10
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/HP
ppdbase=/usr/share/ppd
doc=/usr/share/doc/hplip-3.14.10
html=/usr/share/doc/hplip-3.14.10
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp
bin=/usr/bin
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=no
foomatic-drv-install=no
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.14.10
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=no
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
Current contents of '/var/lib/hp/hplip.state' file:
Plugins are not installed. Could not access file: No such file or directory
Current contents of '~/.hplip/hplip.conf' file:
[installation]
date_time = 12/29/2014 22:32:01
version = 3.14.10
[upgrade]
notify_upgrade = true
last_upgraded_time = 1419919247
pending_upgrade_time = 0
latest_available_version = 3.14.10
[settings]
systray_visible = 0
systray_messages = 0
[last_used]
device_uri = "hp:/net/HP_Officejet_Pro_8620?ip=192.168.1.32"
printer_name =
working_dir = .
[commands]
scan = /usr/bin/xsane -V %SANE_URI%
[refresh]
rate = 30
enable = false
type = 1
[polling]
enable = false
interval = 5
device_list =
[fax]
voice_phone =
email_address =
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
| External Dependencies |
policykit Admin-Policy-framework OPTIONAL - 0.105 OK -
gs Ghostscript REQUIRED 7.05 9.10 OK -
network Network-wget OPTIONAL - 1.15 OK -
scanimage Shell-Scanning OPTIONAL 1.0 1.0.23 OK -
avahi-utils avahi-utils OPTIONAL - 0.6.31 OK -
dbus DBus REQUIRED - 1.6.18 OK -
cups CUPS REQUIRED 1.1 1.7.2 OK 'CUPS Scheduler is running'
xsane SANE-GUI OPTIONAL 0.9 0.998 OK -
| General Dependencies |
reportlab Python-PDF-Lib OPTIONAL 2.0 3.0 OK -
libcrypto OpenSSL-Crypto-Lib REQUIRED - 1.0.1 OK -
pil Python-Image-Lib OPTIONAL - 1.1.7 OK -
pyqt4-dbus PyQt4-DBUS REQUIRED 4.0 4.10.4 OK -
libjpeg JPEG-Lib REQUIRED - - OK -
libpthread POSIX-Threads-Lib REQUIRED - 2.19 OK -
python-dbus Python-DBUS REQUIRED 0.80.0 1.2.0 OK -
python-devel Python-SDK REQUIRED 2.2 2.7.6 OK -
pyqt4 Python-Qt4 REQUIRED 4.0 4.10.4 OK -
cups-devel CUPS-SDK REQUIRED - 1.7.2 OK -
sane-devel SANE-SDK REQUIRED - 1.0.23 OK -
libusb USB-Lib REQUIRED - 1.0 OK -
sane Scan-Lib REQUIRED - 1.0.23 OK -
cups-image CUPS-Image-Lib REQUIRED - 1.7.2 OK -
libnetsnmp-devel SNMP-Networking-SDK REQUIRED 5.0.9 5.7.2 OK -
python-xml Python-XML-Lib REQUIRED - 2.1.0 OK -
python-notify Desktop-notifications OPTIONAL - - OK -
| Compile Time Dependencies |
gcc gcc-Compiler REQUIRED - 4.8.2 OK -
libtool Build-tools REQUIRED - 2.4.2 OK -
make GNU-Build-tools REQUIRED 3.0 3.81 OK -
| Python Extentions |
cupsext CUPS-Extension REQUIRED - 3.14.10 OK -
pcardext PhotoCard-Extension REQUIRED - 3.14.10 OK -
hpmudext IO-Extension REQUIRED - 3.14.10 OK -
| Scan Configuration |
hpaio HPLIP-SANE-Backend REQUIRED - 3.14.10 OK 'hpaio found in /etc/sane.d/dll.conf'
scanext Scan-SANE-Extension REQUIRED - 3.14.10 OK -
| DISCOVERED SCANNER DEVICES |
device `hpaio:/net/HP_Officejet_Pro_8620?ip=192.168.1.32' is a Hewlett-Packard HP_Officejet_Pro_8620 all-in-one
device `hpaio:/net/Officejet_Pro_L7600?ip=192.168.1.31' is a Hewlett-Packard Officejet_Pro_L7600 all-in-one
| DISCOVERED USB DEVICES |
No devices found.
| INSTALLED CUPS PRINTER QUEUES |
HP_Officejet_Pro_8620
Type: Printer
Device URI: hp:/net/HP_Officejet_Pro_8620?ip=192.168.1.32
PPD: /etc/cups/ppd/HP_Officejet_Pro_8620.ppd
PPD Description: HP Officejet Pro 8620, hpcups 3.14.10
Printer status: printer HP_Officejet_Pro_8620 is idle. enabled since Mon 29 Dec 2014 10:06:03 PM PST
error: Unable to communicate with device (code=12): hp:/net/HP_Officejet_Pro_8620?ip=192.168.1.32
error: unable to open channel
error: Communication status: Failed
HP_Officejet_Pro_8620_fax
Type: Fax
Device URI: hpfax:/net/HP_Officejet_Pro_8620?ip=192.168.1.32
PPD: /etc/cups/ppd/HP_Officejet_Pro_8620_fax.ppd
PPD Description: HP Fax4 hpcups
Printer Backend /usr/lib/cups/backend/hpfax does not exist! enabled since Mon 29 Dec 2014 10:06:03 PM PST
error: Unable to communicate with device (code=12): hpfax:/net/HP_Officejet_Pro_8620?ip=192.168.1.32
error: unable to open channel
error: Communication status: Failed
Officejet_Pro_L7600_2
Type: Printer
Device URI: hp:/net/Officejet_Pro_L7600?ip=192.168.1.31
PPD: /etc/cups/ppd/Officejet_Pro_L7600_2.ppd
PPD Description: HP Officejet Pro l7600, hpcups 3.14.3
Printer Backend /usr/lib/cups/backend/hp does not exist!ince Sun 28 Dec 2014 10:55:35 AM PST -
Communication status: Good
Officejet_Pro_L7600_fax_2
Type: Fax
Device URI: hpfax:/net/Officejet_Pro_L7600?ip=192.168.1.31
PPD: /etc/cups/ppd/Officejet_Pro_L7600_fax_2.ppd
PPD Description: HP Fax hpcups
Printer Backend /usr/lib/cups/backend/hpfax does not exist!since Mon 10 Nov 2014 10:22:10 AM PST -
Communication status: Good
| PERMISSION |
Checking Permissions....
Permissions are correct.
Checking for Configured Queues....
Queue(s) configured correctly using HPLIP.
Checking for HP Properitery Plugin's....
No plug-in printers are configured.
Checking for Printer Status....
error: 'HP_Officejet_Pro_8620_fax' Printer is either Powered-OFF or Failed to communicate.
Turn On Printer and re-run hp-doctor
error: 'HP_Officejet_Pro_8620' Printer is either Powered-OFF or Failed to communicate.
Turn On Printer and re-run hp-doctor
Diagnose completed...Syslog......
Dec 30 11:02:20 stargate hp-systray: io/hpmud/jd.c 93: unable to read device-id
Dec 30 11:02:20 stargate hp-systray: [29791]: error: Unable to communicate with device (code=12): hpfax:/net/HP_Officejet_Pro_8620?ip=192.168.1.32
Dec 30 11:02:20 stargate hp-systray: hp-systray(hpdio)[29793]: error: Device not found
Dec 30 11:02:24 stargate hp-systray: io/hpmud/jd.c 93: unable to read device-id
Dec 30 11:02:24 stargate hp-systray: [29791]: error: Unable to communicate with device (code=12): hp:/net/HP_Officejet_Pro_8620?ip=192.168.1.32
Dec 30 11:02:24 stargate hp-systray: hp-systray(hpdio)[29793]: error: Device not found
Dec 30 11:02:29 stargate python: io/hpmud/jd.c 93: unable to read device-id
Dec 30 11:02:29 stargate hp-toolbox: [30057]: error: Unable to communicate with device (code=12): hp:/net/HP_Officejet_Pro_8620?ip=192.168.1.32
Dec 30 11:02:29 stargate hp-toolbox: hp-toolbox(UI)[30057]: error: Unable to open device hp:/net/HP_Officejet_Pro_8620?ip=192.168.1.32.
Dec 30 11:03:03 stargate python: io/hpmud/jd.c 93: unable to read device-id
Dec 30 11:03:03 stargate hp-check: [30059]: error: Unable to communicate with device (code=12): hp:/net/HP_Officejet_Pro_8620?ip=192.168.1.32
Maybe you are looking for
-
Video freezes when playing after ipod updating
My 60GB ipod video freezes up after a few minutes of playing video. It was operating fine until I installed the latest IPOD updater software "2006-01-10". I have tried reseting the ipod, but it makes no difference. When the freeze occurs, I found tha
-
i have a problem with my nokia 5300 xpress music phone! I can listen to the radio with my headphones, but when i play my music, it only plays via the loudspeakers and not through the headphones!! i've emailed nokia and they've repeatedly advised me t
-
IBM JRE 1.5: Uncaught exception in compiler
I installed trial version of Flex Builder 2 Eclipse plug-in. If I run eclipse with the shortcut created by Flex Builder installation, everything works fine (it uses the Sun JRE 1.4.2 included with the installation). If I modify the shortcut to run ec
-
Common delivery instructions for both the plants
hi, sap gurus, in sap system order and delivery instructions are genarated seperately for plants individually. 1000 and 2000. but in our practice one delivery instruction will be created for two plants and basing on the truck availability and feasibi
-
Need help (The files seems unsupported or damaged in LR 3.4.1
Hi Recently I noticed that there are few dng files in my LR 3.4.1 are "unsupported or damaged" accordign to LR 3.4.1. Since using LR for 1 year, I never had this problem before until recently. My pictures are being shot by nikon D90 in nef and then t