Cannot connect locate external devices

I started a project at school. They have final cut pro. They also have external tape deck to capture footage. I saved the project to my external hard drive and used it on a couple of computers at school. I have final cut express on my macbook. When I open the program it says it cannot locate external device apple firewire NTCS 720x480. I click on continue and it opens. I can open projects that I started on my laptop which I have but cannot open the project I started at school. I get "general error (41) Can any one help?

FCP has some features that FCE does not.
Also, not all FCP and FCE versions can interchange.
Your system is protesting over a clash.
Al

Similar Messages

I cannot connect an external device on my hp envy x2

i cannot connect an external device on my hp envy x2. My phone, an external hard drive, a printer, an external dvd drive all doesnt show on the laptop.

Hello dginther,
Welcome to the HP Forums!
I understand wireless is not working properly. If the issue just began occurring, I would perform a system restore. I want you to bring the computer back to the earliest restore point possible, in an attempt to dodge whatever caused the issue. Here is a document on how to perform a System Restore: System Restore
Next, please try the steps in this HP document: Troubleshooting Your Wireless Network and Internet Connection (Windows 8)
These steps should be enough to resolve the issue. If not, you can try a manual reinstall of the driver:
1. Go into Device Manager, then Network adapters.
2. Right-click on the wireless driver, and select "Uninstall".
3. Restart the computer. This will force the driver to reinstall itself.
Please let me know the results of your troubleshooting. Thanks!
Mario
I worked on behalf of HP.

Isync cannot connect to this device

Hi I just purchased an I Phone 3gs, I am trying to sync the phone on Mac Book Pro (snow leopard 10.6.8) but cannot. I have been able to assign the device to the computer in so much as when I open network preferences "IPhone USB" shows as "connected" and "Bluetooth PAN" also is shown as connected.
However when I open ISync and try to sync the device, the message is "1 device found" then when I press scan the message is " ISync cannot connect to this device.
Similarly the phone reveals 2 personal hotspot connections, but when I try to connect to my Mac Book Pro it says "connection unsuccessful".
I have tried deleting both the IPhone USB connection and the PAN connection and starting from scratch, and I shutdown the computer and re-booted but no luck there. I also tried connecting without the USB cable via Bluetooth and then with the USB cable but to no avail.
So it appears to be the final stage that is the problem, it is simply not recognising the device. I do not have this problem with other devices, such as external HD or flash drives.
Many thanks,
Michael.

iSync is for 3rd party mobile devices. iPhone uses iTunes.
Open Mac iTunes app. Connect your iPhone with the supplied cable. What do you see in iTunes left panel under DEVICES?

Unable to locate external device after upgrade

i have been using FCE 2.0.3 and mac os 10.3 to view clips on video monitor (tv) easy set up was dv pal. so i chose view and and then firewire from the FCE menu to review clips on video monitor through my cannon mv750i-worked ok until recently. I have also been able to capture as well. Nothing wrong with the camera as it works ok in another computer (power pc) which has mac os 10.4.7 but fce is still 2.0.3. So is something i am not doing?
i then upgraded to mac os 10.4 and fce to 3.5 and easy set up also at same dv pal and a window message comes up informing me that "unable to locate external device" or you have changed system configurations. I have made sure that the camera is on. so please can someone tell me what i can do?

When I recently upgraded from OSX 10.3.9 to OSX 10.4.7 I found that FCE 3.0 would not recognise the camera.
When I upgraded to QuickTime 7.1.2 the problem immediately disappeared.
http://www.apple.com/quicktime/download/mac.html
Ian.

I cannot connect my external hard drives (1 WD My Passport and 1 LaCie Porsche Design). The drives were connected and worked perfect, the WD is used as a Time Capsule, the LaCie is formatted as exFAT and used for miscellaneous. They are both USB 3.0

I cannot connect my external hard drives any longer. I have one WD "My Passport" used as a Time Capsule and one LaCie Porsche Design used for all different kind of data, formatted in exFAT. They worked fine, connected direct or through an additional USB hub or also attached to a Dell monitor. The Lacie helds my iTunes Library and the iPhoto library.
After I moved the iTunes library to the external drive, from time to time the drive went into a never ending loop and I had to shut down the laptop (MacBook Air).
The last time starting again the drives were not recognized any longer. I tried to connect them to another MacBook, which didn't work.
Starting with Windows 7, the WD is also not recognized at all (perhaps because of time capsule format?) and the LaCie gives an error.
Could anybody tell me if there is a chance to get them alive again? When I connect them now, they start to heat up quite fast without anything else happening.
Thanks

Hi,
Just want to clarify, have you checked to make sure the cords are not damaged (going from hard drive to computer and or any power source )?
You have also check to make sure that usb ports are working correctly?
If you have checked these things it may be that the external drives have failed.
I would google the error message from the LaCie drive before I do anything.
There are several ways that I know of, one is to put the hard drive in the freezer for a while (make sure you wrap it air tight) if this works it is not a permenint fix. You might be able to transfer information to another source.
The other method is to plug the hard drive into a hard drive connector a product like this:
http://www.newegg.com/Product/Product.aspx?Item=N82E16817707192
to do this you would have to remove the hard drive from its enclosure and still this is not a guarantee it will work.
The finally way I know is using a recovery service. This can be rather expensive, and there are no guarantees

When connecting my iphone 4 to itunes for the first time i get the following message "cannot connect to this device because Apple Mobile Service is not started" what does this mean and how do I solve it?

when connecting my iphone 4 to itunes for the first time i get the following message "cannot connect to this device because Apple Mobile Service is not started" what does this mean and how do I solve it?

I'd start with the following document with that one:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

Connect to external device using ip address in lan

Hi,
I have a external device in lan ,
,want to connect this external device using ip address.

Dhaval.Yoganandi wrote:
hi ejb,
may be he wants to connect with the 172.16.0.20 via public network ?And ?
That has nothing to do with anything. Whether the resource is on the local network or accesible through the internet only is not relevent here at all. This forum is for Java network programming. If a resouce is not available because you are not connected physically to a network that is a network problem. That is not a Java progamming problem.
Okay?
There's alot of rubbish posted in this forum about "public networks" and what not and not one lick of it is related to Java programming. Yes if you connect through more routers to something there is a better chance that somewhere along the way that you will hit a firewall or other similar issue. But these are all network issues. Not networking programming issues. And not resolvable directly in Java any way you want to think about it.

"The BlackBerry Desktop Software cannot connect with this device." after repair

I download the Desktop Software for BlackBerry onto my Mac Book Pro for the first time.
After installing I connected my PlayBook. I get the message "The BlackBerry® Desktop Software cannot connect with this device."
The program suggested I repair the device software, so I did. After that I set it up and ran the updates.
When I plug it back in I get the exact same message.
What should I do next?
co-founder of Diaree | BB Dev for PictureThis

I also cannot connect to my two playbooks using desktop manager on mac.
One of the two playbooks is now shipped back to rim for repair (see here http://supportforums.blackberry.com/t5/BlackBerry-PlayBook/5MP-Playbook-Camera-Blackscreen-Errors-Ha... The issue of desktop manager not being able to connect to the playbook started with this playbook when the repair I was prompted to to stopped 1/4 way into it. Multiple retries did not make any difference.
Since then, I have tried connecting my other (functioning) playbook to the same mac but when I plug in usb cable I get the same "cannot connect" errmsg and prompted to "repair". I am definitely NOT going to "repair" this one. So I uninstalled the desktop manager and reinstalled it to see if it makes a difference. Unfortunately it did not and I get the same "cannot connect" errmsg.
If anyone has any suggestion how this issue can be resolved that would be great. I think something is stuck on the mac and is not getting wiped out when desktop manager is uninstalled. Thanks.

"Isync cannot connect to this device" Yet phone has connected to other Imac

I have a Nokia 6230i and for ages I have been trying to get my Macbook to connect via iSync, I thought the phone was at fault, I had taken them both to a genius bar and was told the phone was at fault but last week I connected the phone to an iMac via iSync and it worked a treat. Unfortunately the imac is not my workhorse and the contacts I need to use are on the macbook.
I have reinstalled iSync by extracting it from the dvd but this also did not work. I keep getting "isync cannot connect to this device" every time
Why cant it be a bit more specific? Why not an error code or something that will let you track down the problem
Has anyone else had the same problem with iSync?

Hi,
I had the same problem with a 6230i from a friend. After setting date and time on the mobile iSync had no problems anymore.
Ulrich

Verizon Motorola E815 iSych error: 'cannot connect to the device'

Hello,
I have a Mac Mini running 10.4.3 and iSynch 2.1.1 with integrated bluetooth that won't synch with the Verizon Motorola E815 - other discussion threads I've read haven't had a specific remedy...
-phone has successfully paired to computer
-bluetooth connection is set to automatic
-phone appears within iSynch
Within iSynch, I click the Synch button:
1) progress bar appears stating 'Connecting'
2) phone makes a noise indicating connection is in progress and Bluetooth icon appears
3) after about 20 seconds, the synch fails with the following error:
Cannot connect to the device. Connection to device was closed. Device "Motorola Phone" synchronization failed
I've open the Bluetooth app within System Preferences and viewed the Motorola phone when I'm attempting to connect. It shows the following information (which I'm assuming means it's connected properly)
Paired: Yes
Configured: Yes
Favorite: Yes
Connected: Yes
Serial Port: Yes
Also note, when I navigate within the phone to:
top center button (dash with dashes under it): settings: connection: bluetooth link: handsfree: [look for devices] --- no devices are found.
Perhaps I'm just a newbie to the whole Bluetooth thing but I'm at a loss - any help is greatly appreciated.
Mac Mini Mac OS X (10.4.3)

Well, I just figured it out.
After pairing, the phone itself needs to be shut off and turned back on. Once I did this, the Bluetooth enabled at startup and iSynch transferred data without error.
Cheers
Doug

Cannot connect to the device anymore

I have been using the above device (HP Photosmart 5510 e-All-in-One Printer - B111a), for several months, to print, scan and copy. The printer is configured wirelessly and is used by 2 different PCs (a desktop running Windows 8 and a laptop running Windows 7). Today, don't know for what reason, we cannot connect to the device from either of the two machines. I've unsuccessfully tried to re-set the wireless connection twice, including by re-running the set-up program. The printer function itself DOES work, it’s the wireless connection that doesn’t, as written in a diagnostic report I printed after failing to set up the device again using the device’s menu: “Your HP printer is unable to connect to your wireless router ... caused by the settings on the router ... and suggesting to change the wireless router encryption setting to “WPA-AES” or “WPA-AES or TKIP” and run the Wireless Setup Wizard again” . message and the webpage times out. If I try to run the setup from the Photosmart software on the PC, I get a message “The server at 192.168.0.20 is taking too long to respond” and the connection never occurs. ALSO, I've received a couple of errors saying that if I installed the printer by IP address, I might need to update the IP address and to use the Update IP Address item in the Start menu entry for the printer. I don't think I used the IP Address method to install the printer in the first place and, at any rate, I don't know where to find the Start menu for the printer.
Is anybody able to help?
Thanks, Franco

Welcome back to the HP Community @Franco111 !
I hope to lend you a hand with the wireless connection issues you are currently have with your Photosmart 5510 and your network.
I would first suggest power cycling the network devices, in this order:
Turn off the printer and computer and unplug the router for 1 minute (do not press any buttons on the router).
Plug the router back in and wait another minute, next turn on the printer and computer.
Run the Print and Scan Doctor to see if the tool can detect the printer on your network now.
If you are still not connected, try scoping out and trying this guide: HP Photosmart 5510 e-All-in-One Printer Series - Unable to Connect to a Wireless Network When Using ...
When you print out the Wireless Network Test Report, you will see your IP address. Try accessing the Embedded Web Server (printers webpage), from your PC by typing in the IP address in to a web browser.
If you are still getting a message to check your router settings, here is what you are looking to check over:
Network name and password to have no spaces or punctuation.
If using WPA2 security, switch to WPA personal.
Dual broadcast Wireless b/g/n (printer may connect to g).
Turn Mac Filtering Off.
Firewall settings need to be at their default settings, or set to a lower security.
Multicasting "on".
Following ports need to be un-blocked:
Incoming (UDP) ports : 137, 138, 161, 427
Outgoing (TCP) ports : 137, 139, 427, 9100, 9220, 9500
Let me know the results so far and we will go from there!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

LaserJet Pro M1536dnf MFP ToolboxFX, cannot connect to the device

Hi , I see you have put a great deal of effort into getting the ToolboxFX to work again, I'd be happy to help you with this. I found a post written by a colleague that I think might help. Please take a look at what suggested to another user: Toolbox FX error. Please let me know if this helps, or if you require further assistance. Thanks.

Hello, I am new to HP Forums.
I have tried to search these forums for a working solution for my issue, without success.
I apologize if I have provided too much information all at once. I see many people seem to have problems with the HP ToolboxFX software. Thanks to anyone that can help me solve my current issue. Product: HP LaserJet Pro M1536dnf MFP
Model: CE538A
Firmware Date: 20140630 (was 20100615) Computer: Dell OptiPlex 980 Mini-Tower
OS: Microsoft Windows 7 Ultimate 64-bit SP1
RAM: 8GB Background: ****
We have a small quantity (4 via USB, 2 via wired Ethernet) of this model AIO printer in use here since 2010. I have never had any problems printing to or scanning from these printers. The HP ToolboxFX software DID function on my PC without issue until it was recently uninstalled.
I have never tested the Faxing function of the printer connected to my PC, so I don’t know if that part of it works. The fax function does work on another (same model) printer installed on our network. Originally this printer was connected to my PC via the supplied USB cable and installed using the supplied HP software media (Installer v1.5.6.4020 I believe).
My PC had a couple USB ports that did not work, and during the troubleshooting process, a second copy of this printer became installed and linked to a different USB port. I wanted to see if I could have HP ToolboxFX deliver faxes received on one of our networked HP LaserJet Pro M1536dnf MFP printers to my PC instead of another PC currently receiving these faxes. So I thought I would uninstall the printer and software on my PC and reinstall it using the updated software (Installer v3.0.3.5253) downloaded from the HP website. That is when my problems started. Problem: ****
HP ToolboxFX seems to be running in the system tray, but when I right click the system tray icon and select “Open HP ToolboxFX”, I receive a popup error window. By the way, the printers name no longer appears in the right click context menu. **** Window content:
Cannot connect to the device. Make certain that the device's power cord is plugged in, the power is turned on, and that all cables are properly connected. Check the Troubleshooting tab or product documentation for more information. [ OK ] <---<< Button Clicking the [OK] once displays the same popup window again. Clicking the [OK] button a second time opens HP ToolboxFX but shows my printer status as not connected displaying a red square with white “X” inside it. I can still print to and scan from this printer. It is only the HP ToolboxFX software that is not working. What I have tried to resolve problem: **** o- I have tried uninstalling and then reinstalling the printer and software (Installer v3.0.3.5253), using USB. Same “Cannot connect to the device” window.
o- Thinking the newer software might need newer firmware installed on the printer, I ran the “Firmware Update Utility” found on the HP website. Firmware version 20140630 successfully installed.
o- I uninstalled and then reinstalled the printer and software (Installer v3.0.3.5253), using USB. Same “Cannot connect to the device” window.
o- Thinking the perhaps the newer software was the problem, I uninstalled (Installer v3.0.3.5253) and then reinstalled (Installer v1.5.6.4020, original working) the printer and software using USB. Same “Cannot connect to the device” window.
o- Then I uninstalled (Installer v1.5.6.4020) and then reinstalled (Installer v3.0.3.5253) the printer and software using USB. Same “Cannot connect to the device” window.
o- Wondering if this was a USB software issue, I uninstalled and then reinstalled the printer and software (Installer v3.0.3.5253), using wired Ethernet. Still no problems printing or scanning. Could now access the printer using its IP address, but the HP ToolboxFX error changed. Now the popup window contained a different error. **** Window content: HP ToolboxFX has encountered an error and can not recover. Please re-start HP ToolboxFX, or re-start your PC. You will not be able to receive alert messages, or use other HP ToolboxFX features until HP ToolboxFX has been restarted. Windows version: Win32NT - 6.1.7601.65536
HP ToolboxFX version: 006.015.01163 [ OK ] <---<< Button I believe clicking the [OK] button NEVER clears the popup window (or just makes it reappear). The normal HP ToolboxFX program window never appears.
o- As this was not helpful, I uninstalled and then reinstalled the printer and software (Installer v3.0.3.5253), using USB again. Still no problems printing or scanning, but the HP ToolboxFX error remained the same. The popup window still contained the following error. **** Window content:
HP ToolboxFX has encountered an error and can not recover. Please re-start HP ToolboxFX, or re-start your PC. You will not be able to receive alert messages, or use other HP ToolboxFX features until HP ToolboxFX has been restarted. Windows version: Win32NT - 6.1.7601.65536
HP ToolboxFX version: 006.015.01163 [ OK ] <---<< Button I believe clicking the [OK] button NEVER clears the popup window (or just makes it reappear). The normal HP ToolboxFX program window never appears.
o- I then tried a forum posted claimed solution (follows). This did not resolve my ToolboxFX problem but did reset the error window content and software functioning back to its original non-working state. Now I am back at square one. Printer still works but cannot use ToolboxFX at all. Posted claimed solution START: ****
From pcwizard on 08-03-2012 08:52 AM
Re: LaserJet M1536 ToolboxFX error Hi Maddie54, Try the following and see if it works for you;
o- Please go to the following directory C:\ProgramData\Hewlett-Packard\ToolboxFX\Settings
o- Under this directory delete all the files in Settings folder.
o- Then reboot pc and restart the printer. *This can occur when the IP has changed or the printer had lost communication and been re-connected. I am an HP employee.Posted claimed solution END: **** **** Window content:
Cannot connect to the device. Make certain that the device's power cord is plugged in, the power is turned on, and that all cables are properly connected. Check the Troubleshooting tab or product documentation for more information. [ OK ] <---<< Button Clicking the [OK] once displays the same popup window again. Clicking the [OK] button a second time opens HP ToolboxFX but shows my printer status as not connected displaying a red square with white “X” inside it.
*-*-*-*-*- I noticed that the HP uninstall process leaves a large quantity of abandoned folders and files scattered on the file system. I can only imagine that it has done something similar to the registry files. I can only imagine that since I know ToolboxFX works on other PC’s and DID work on mine, at one time, there must be a way to get it to work again. Perhaps there is a better uninstall utility (or manual procedure) that can remove whatever is causing the ToolboxFX software to not work. I hope someone has some useful insight into this problem. Would be nice to use the HP ToolboxFX software to receive faxes from one of our networked printers.
Thank you very much for your assistance.
Paul

Full iPhoto....cannot export to external device

My iPhoto is full!!! I have 11,000 pics and vids in there and I am attempting to export to an external device. (WD My Book) I selected all photos, clicked export, selected device and the error message I keep getting is 'cannot create volume/....' Please help if you can....
We have 15 month old triplets and a 2 month old and we take 100 pics every other day. Can't live without it....

Exporting is not the best way
Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
And if you want a library on your WD My Book and on your external drive iPhoto Library Manager - http://www.fatcatsoftware.com/iplm/ - will be very helpful
LN

MacBook Pro cannot connect to external display (projector) under Windows

Our office has got one of those lovely new 13" MacBook Pros and we cannot figure out why it cannot connect to either of our 2 projectors with Windows 7.
We have an older MBP with NVidia graphics that connects just fine under both OS X and Windows. And this machine connects fine under Snow Leopard.
There was a recent Thunderbolt chipset update and we applied that; on the Windows side the Intel driver has been updated but nothing happens. Have also zapped the PRAM to no effect.
To add another wrinkle: I just connected the MBP to my Cinema Display and the external display shows fine in both OS X and Windows--Windows didn't even require me to go to the control panel.
This leads me to two thoughts: either it is something with the Thunderbolt to VGA adaptor (hard to believe, though, since it works for OS X) or it is something to do with the native resolution of the projector (equally hard to believe, as changing through various settings in Windows NOTHING happens on the external projector--it doesn't blink, go back or anything.)
Any ideas?

I wish I could find the discussion, but I cannot.
There was a discussion about the Windows 7 driver for the Thunderbolt port. The conclusion I believe was that it only outputs digital signals, not analog.
The other conclusions were:
A USB-VGA adapter adapter bypasses this limitation because the driver is in the adapter itself and works regardless of the OSX/Windows operating system in charge.
Run Windows under VM, where OSX is in charge and can create analog output through Thunderbolt
If only I could find that thread ...

URGENT---Error regarding Cannot connect to Capture Device

Hello Everyone, I am new to JMF and I am trying to build a project using JMF. In the project I need to capture images from webcam and display it on a window.
I have written the following class for this:
import java.awt.*;
import java.awt.image.*;
import javax.media.*;
import javax.media.control.*;
import javax.media.format.*;
import javax.media.protocol.*;
import javax.media.util.*;
public class CameraController
     private Player player;
     * Initialises the video capture device.
     * @param name the name of the device (e.g. <code>vfw:Microsoft WDM Image Capture (Win32):0</code>).
     * @param locator the location of the device (e.g. <code>vfw://0</code>).
     * @param size
     * @throws Exception if there was a problem accessing the camera.
     public CameraController(String name, String locator, Dimension size) throws Exception
          // Create capture device
          System.out.println("Initialising video capture device: "+name);
          try
               CaptureDeviceInfo captureDeviceInfo = CaptureDeviceManager.getDevice(name);
               VideoFormat videoFormat = null;
               Format[] formats = captureDeviceInfo.getFormats();
               for (int i=0; i<formats.length; i++)
                    if (((VideoFormat)formats).getSize().equals(size))
                         videoFormat = (VideoFormat)formats[i];
                         break;
               DataSource dataSource = Manager.createDataSource(new MediaLocator(locator));*
               FormatControl[] formatControls = ((CaptureDevice)dataSource).getFormatControls();
               for (int i=0; i<formatControls.length; i++)
                    if (formatControls[i]!=null)
                         Format supportedFormats[] = formatControls[i].getSupportedFormats();
                         if (supportedFormats!=null)
                              for (int j=0; j<supportedFormats.length; j++)
                                   if (supportedFormats[j].matches(videoFormat))
                                        formatControls[i].setFormat(videoFormat);
               CaptureDeviceInfo deviceInfo = ((CaptureDevice)dataSource).getCaptureDeviceInfo();
               ((CaptureDevice)dataSource).disconnect();
               player = Manager.createRealizedPlayer(deviceInfo.getLocator());
               player.start();
               try { Thread.sleep(3000); }
               catch (InterruptedException e) {}
          catch (Exception e)
               System.out.println("Error Initialising video capture device!");
               throw e;
     public void shutdown()
          player.close();
          player.deallocate();
     public BufferedImage getFrame()
          FrameGrabbingControl frameGrabber = (FrameGrabbingControl)player.getControl("javax.media.control.FrameGrabbingControl");
          Buffer buf = frameGrabber.grabFrame();
          Image img = (new BufferToImage((VideoFormat)buf.getFormat()).createImage(buf));
          if (img==null)
               System.out.println("Error: Capture device doesnt appear to be initialised yet.");
               return null;          // happens if video device isn't properly initialised yet
          BufferedImage buffImg = new BufferedImage(img.getWidth(null), img.getHeight(null), BufferedImage.TYPE_INT_RGB);
          Graphics2D g = buffImg.createGraphics();
          g.drawImage(img, null, null);
          return buffImg;
     public Component getVisualComponent()
          return player.getVisualComponent();
There is another class GUI which calls the shutdown() function on occurrence of WindowClosing event.
When I try to run this, It does run for the first time but after that, the following exception occurs:
java.io.IOException: Could not connect to capture device
javax.media.NoDataSourceException: Error instantiating class: com.sun.media.protocol.vfw.Datasource: java.io.IOException: Could noy connect to capture device
at javax.media.Manager.createDataSource(Manager.java.1012)
at CamerController.<init>(CameraController.java:57) ------ line where datasource is declared
It doesn't run until I restart my laptop and then again after restart it runs only for the first time..
I don't understand where is the problem. I am using Windows7, JMF 2.1.1, NetBeans 6.7.
Kindly help me to find out the problem in this. Its extremely URGENT..!!!!

Anjani_Bansal wrote:
2. I am not shouting at anyone.Actually, I think even 12-year old girls on MySpace understand that TYPING IN ALL CAPS IS TAKEN TO BE SHOUTING on the internetz... so when you say its URGENT, everyone who understands the internet is going to read that as you SHOUTING the word URGENT.
Which is simply impolite.
3. I didn't ask YOU to answer my query. I asked only those people who are there to help and who understand my situation.Actually, you said everyone. Andrew is a person. Therefore, you did ask him to answer your question...and further, you simply asked "Kindly help me to find out the problem in this". Apparently Andrew took "this" to mean forum etiquette, which he was quite kind to help you with.
For others[ Not You] :-
Sorry every one if you think I am shouting. I am kindly requesting you for help.
Thanks for understanding..Telling people on a forum that you need help URGENTLY isn't particularly asking kindly. Ignoring the whole rudeness of typing in all-caps, there's also the whole urgent thing. Do you think that people are going to read your post and then go "Eh, this kid doesn't sound like he's in a hurry. I think I'll come back and answer his question in a few days, let him sweat it out".
Seriously, people add urgent to their posts like somehow it's the emergency flag on a help desk.
This isn't a helpdesk, and telling us how urgently you need help isn't going to positively affect the speed at which you get help... in fact, it's far more likely to get you completely ignored by the people with the answer than it is to get you help any faster...
Speaking of being ignored, I'm pretty sure I "kindly" suggested something for you to try above, and you never reported back the results of my suggestion. Am I to take from the fact you decided to spend your time sparing with Andrew that (1) you don't really care about fixing your problem (2) you're not really paying attention to the people who're trying to help you (3) your problem isn't really all that URGENT to begin with? (4) you somehow think your time is more important than mine and I should ignore your thread entirely? [I'd seriously advise looking through a few threads on this forum to see where the help comes from before you think about answering this one... there are 2 people that regularly help people in here, and you've already pissed one of them off...]

Cannot connect locate external devices

Similar Messages

Maybe you are looking for