Cannot connect MacOS X server to an Active Directory

Hello,
My XServe Intel, running OS X Server 10.4.9, cannot connect to our Active Directory. Phase 1 to 4 seems ok but the 5th never ends. I have to force Directory Access to quit and then reboot because Admin Server doesn't respond too. I tried 3 times.
It works well with a MacOS X server running on a G5 or with a MacOS X client.
The XServe is connected to the network using the 2 Ethernet ports agregation.
It was a problem launching OpenDirectory under 10.4.8 but 10.4.9 solve this issue.
Could there be the same problem on 10.4.9 with an AD connection through a dual gigabit Ethernet Link ?
Thank you for your help...
Pat

The solution for anyone who has the same problem.
Return to standalone server, erase the "DirectoryService" folder and the "edu.mit.kerberos" in Library/Preferences and the "krb5.keytab" file in /etc, then reboot.
Connecting to the AD works in Directory Access.
Configure as "OpenDirectory Master" again in Admin Server.
AD's users are now visible in the Workgroup Manager and could be nested into OpenDirectory groups to give them specific rights on the shares.

Similar Messages

I need a request code for offline activation. Because i cannot connect with adobe server for online activation. But I receive "The request code is invalid." by generate answer code.

I need a request code for offline activation. Because i cannot connect with adobe server for online activation. But I receive "The request code is invalid." by generate answer code.

Dear Anubha,
I hope these windows illustrate what I am facing.
The above window shows the prompt that the software requires activation.
The version is 8.1.0.
This next window is the point where I select activation by phone.
This final window shows that the "response code" is not returned. I get an
"Activation Number" instead.
Steven
On Tue, Jan 27, 2015 at 10:50 PM, Anubha Goel <[email protected]>

Can't connect to Small Business Server 2003 via Active Directory

I have done lots of searching, both in these forums and the wider internet, and cannot find a solution to my specific problem.
I am trying to connect my G5 (10.3.9) to a Windows network. We have a Microsoft Small Business Server 2003 with Active Directory. The PCs have no problem using this, and I can connect to shares setup on the server via AFP.
But I am having problems when I try to configure the AD plug-in in Directory Access on the Mac. When I click 'Bind', I enter the Server's Administrator username & password and when I click 'OK', it gets to Step 3 of 5 "Verifying Credentials". It ticks away at this step for about 30 seconds, then comes up with error message saying "Invalid user name and password combination."
I have tried other users with admin privileges, but they don't work either. I know the usernames and passwords aren't invalid, because I created them. I have tried fiddling around with other settings in the AD setup, but nothing gets any further.
Without any other 3rd party software (that's my final option), is there something I need to check/change, either on the Mac or the server, to make this Mac to authenticate via AD? Please help!

Hi Andbrowny, thanks for your response.
Your advice didn't really help my Active Directory problem (AD doesn't require SMB does it?), but it gave me some progress on my SMB problem. I can connect via AFP, but previously when I tried to connect via SMB, it kept coming up with the error "Could not connect to the server because the name or password is not correct".
Now, after changing the policies on the server, I get an error -43 message saying "The operation could not be completed because one or more required items cannot be found."
So now I have two problems! SMB is not finding something it needs, and Active Directory is not "verifying credentials".
Actually, I have three problems: When I am connected via AFP, filenames over 31 characters long are truncated on the server, and I can't copy long filenames onto the server without renaming them. I have read that SMB would fix this to a degree (256 characters for the complete file path), but is there anything (a protocol or software) that allows long filenames to be read/written with ease?
Side note: The server is not 100% configured, the bloke installing it still has some work to do, but Active Directory works for all the XP machines, and I can connect to each XP workstation with SMB.

Cannot connect to abap server, please check your abap server connection

Installed new NW BPC 7.5 system on windows 2008 server but get the error as follows
when logon to BPC server:
"Cannot connect to abap server, please check your abap server connection".
"define system user group tab" is inactive in server manager also.
Server Diagnostic errors for SAP Server Connection:
Database Connection
Status Connection Error
as per note 1385864 but this note has not helped get past this status with installation.
User Type value is either set to Communication Data for all three users (BPC_ADMIN, BPC_SYSADMIN, BPC_USER).
and these accounts are not locked.
Any ideas for these errors?
Regards,
Aidan

Hi Aidan,
"Your logon id (domain\user) does not have SystemAdmin rights; some functionality
is disabled."
This is caused by the fact that the user you are logged in as isn't in the UJA_SVR_DEFAULT table, the SYSADMIN field needs to have a value that contains your user id (i.e. DOMAIN\USER) . You can set this up with the UJA3_WRITE_SYS_USERS program.
"When I try to install APPshell the following errors occur:
@8O@ UJA_DATA_CHECK E 006 Application PLANNING's multiprovider /CPMB/ATMKOOE not exist in BW
@8O@ UJS_EXCEPTION E 003 Errors occured during "after import" method call during activation"
Aidan, sounds like something went terribly wrong during your activation process. Do this, Clean the appset with the UJS_ACTIVATE_CONTENT program and make sure that everything is completely deleted. Make sure that there is a lot of memory available for the activation and try it again.
It should work.
Hopefully this helps you.
Cheers, Scott

System Update -- Cannot connect to proxy server - SOLVED

I'm on a ThinkPad T61 running Windows Vista. When I try to download from System Update, I always get the error message "Cannot connect to proxy server."
I have tried connecting to the Internet directly via Ethernet rather than through a wireless router--it doesn't make any difference.
I have also uninstalled System Update and then installed the version I downloaded from lenovo.com--same result.
System Update is an exception in Windows Firewall, and I have even tried running System Update with Firewall disabled--ditto.
Can someone please help me?
Message Edited by Tim_Lenovo on 01-29-2008 02:49 PM
Solved!
Go to Solution.

I have discovered one other potential cause of this behaviour.
If your computer is attached to a Domain, ensure you are connected to the Domain using a profile that has administrator rights when attempting these upgrades.
I was using a local profile with administrative rights, on a network connection that was outside of the corporate LAN, and I was getting the "Cannot connect to proxy server" error.
When I connected to our Corporate LAN and logged on to the machine with an administrative profile, the Proxy Server error went away, and I was then able to connect and download my required updates.
Just an FYI if you are doing this inside a large, firewalled LAN running from Active Directory.

I cannot connect to the server – screen sharing, Server Preferences,...

hello
I have a problem with xserver. Everything seems to be working ok, however, one day system started to break down.
I cannot connect to the server through *screen sharing* neither through internet, nor through local net. Even after restart login wont shows up.
I cannot also connet to the *Server Preferences* (Unable to authenticate to the Open Directory master.)
Sometimes I cannot also connect to the *Server Admin* (but after restart it works, however, Server Preferences are unavailable).
SSH works ok.
Nor repair permission, neither verify disk, or update for OS X server 10.6.4 worked.
system log periodicaly enters this message:
Jul 14 23:24:35 xserve WindowServer[5091]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Jul 14 23:24:35 xserve com.apple.WindowServer[5091]: Wed Jul 14 23:24:35 xserve.sk WindowServer[5091] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Jul 14 23:24:36 xserve com.apple.launchd[1] (com.apple.RemoteDesktop.agent[5096]): posix_spawn("/System/Library/CoreServices/RemoteManagement/ARDAgent.app/Content s/MacOS/ARDAgent", ...): No such file or directory
Jul 14 23:24:36 xserve com.apple.launchd[1] (com.apple.RemoteDesktop.agent[5096]): Exited with exit code: 1
Jul 14 23:24:36 xserve com.apple.launchd[1] (com.apple.RemoteDesktop.agent): Throttling respawn: Will start in 10 seconds
Jul 14 23:24:36 xserve loginwindow[5085]: Login Window Started Security Agent
Jul 14 23:24:36 xserve loginwindow[5085]: Login Window - Returned from Security Agent
Jul 14 23:24:36 xserve loginwindow[5085]: AuthorizationRef returned errAuthorizationDenied. Exiting.
Jul 14 23:24:36 xserve com.apple.loginwindow[5085]: AuthorizationRef returned errAuthorizationDenied. Exiting.
Jul 14 23:24:36 xserve com.apple.launchd[1] (com.apple.loginwindow): Throttling respawn: Will start in 3 seconds
Jul 14 23:24:36 xserve com.apple.ReportCrash.Root[4982]: 2010-07-14 23:24:36.505 ReportCrash[4982:350b] Saved crash report for ManagedClient[5099] version ??? (???) to /Library/Logs/DiagnosticReports/ManagedClient2010-07-14-232436localhost.crash
can you advice me?
thanks

Hi Shannon McLain,
Kindly let us know if there is any specific error message that you are getting while installing it.
Here is what you can try:
Creative Cloud Help | Download, install, update, or uninstall apps
https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
https://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html
Kindly share the results once done.
Thanks,
Atul Saini

TS3899 I tap on mail and I get a message that "cannot connect to the server" what does that mean and how do I fix it?

Cannot connect to the server. What to do?

Hey LauradellLaurawidder,
Thanks for the question. I understand you are experiencing issues with mail on your iPad. The following article may help to resolve your issue:
iOS: Troubleshooting Mail
http://support.apple.com/kb/TS3899
Try these basic troubleshooting steps first
1. Tap Safari and attempt to load a webpage (try any webpage). If you can load a webpage, then your device has Internet access. If you are unable to load a webpage, follow these troubleshooting steps.
          - Try to use an alternate Internet connection if available:
                    1. Try a different Wi-Fi connection
                    2. If your iOS device has an active cellular data plan, tap Settings > Wi-Fi and turn off Wi-Fi.
                    3. If the affected email account is provided by your Internet provider, see if your issue is resolved while connected to your home Wi-Fi network.*
2. Log in to your email provider's website to ensure that the account is active and the password is correct.
3. Restart your iOS device.
4. Delete the affected email account from your device.
          - Tap Settings > Mail, Contacts, Calendars.
          - Choose the affected email account, then tap Delete Account.
          - Add your account again.
* If you are only able to use your email account while connected to your home network, this may be a limitation put in place by your email service provider. For further support, please contact your email service provider directly.
Additionally, if you are using a Gmail account you may find the following steps helpful:
iOS: Gmail account will not connect to Gmail server
http://support.apple.com/kb/TS3058
Thanks,
Matt M.

What does it mean "Cannot connect to the server" ?

We actually have two issues. For some reason Yahoo email stopped downloading on my wife's droid razzr. The section to alter the frequency to check for email is greyed out so you can't get in to it. Perhaps that has something to do with it. It is a "new" replacement phone since the original one quit working mid-text a couple weeks ago (phone only 5 months old). Both of my phones seem to get the "Cannot connect to the server" notice every now and then. Could use some help. Thanks

Hey LauradellLaurawidder,
Thanks for the question. I understand you are experiencing issues with mail on your iPad. The following article may help to resolve your issue:
iOS: Troubleshooting Mail
http://support.apple.com/kb/TS3899
Try these basic troubleshooting steps first
1. Tap Safari and attempt to load a webpage (try any webpage). If you can load a webpage, then your device has Internet access. If you are unable to load a webpage, follow these troubleshooting steps.
          - Try to use an alternate Internet connection if available:
                    1. Try a different Wi-Fi connection
                    2. If your iOS device has an active cellular data plan, tap Settings > Wi-Fi and turn off Wi-Fi.
                    3. If the affected email account is provided by your Internet provider, see if your issue is resolved while connected to your home Wi-Fi network.*
2. Log in to your email provider's website to ensure that the account is active and the password is correct.
3. Restart your iOS device.
4. Delete the affected email account from your device.
          - Tap Settings > Mail, Contacts, Calendars.
          - Choose the affected email account, then tap Delete Account.
          - Add your account again.
* If you are only able to use your email account while connected to your home network, this may be a limitation put in place by your email service provider. For further support, please contact your email service provider directly.
Additionally, if you are using a Gmail account you may find the following steps helpful:
iOS: Gmail account will not connect to Gmail server
http://support.apple.com/kb/TS3058
Thanks,
Matt M.

Solution to iCloud "cannot connect to the server" upgrade issue

I have just switched my iPhone 4s to a new carrier. (iOS 7.0.4)
Once the previous carrier (finally) unlocked its activation grip, all went well through restoring the phone. One issue remained:
iCloud wanted me to "agree to new terms of service" and would not allow me to do anything else with it. But when I tapped the button to "read the terms of service" the dialogue "Cannot connect to the server" popped up.
The solution turned out to be relatively painless:
Make sure you have backed up any Photo Streams that are present on your iPhone. (I use Aperture for this.)
At the bottom of the iCloud settings screen (Settings->iCloud) tap the "Delete Account" button. You will be warned that photos, documents, etc., will be deleted from your iPhone. As long as you are confident of your backups, tap "Delete" in the warning dialogue.
If you have "Find My iPhone" enabled, you will need to enter your Apple ID and password to turn it off. This is the only way to gain access to this setting that I could find.
Cold-boot your iPhone (Power + Home). I suppose you don't HAVE to do this, but seemed like A Good Thing.
Return to the iCloud settings screen and turn iCloud back on. Enter your Apple ID and password. Double-check that "Find My iPhone" is enabled, if desired.
You will be asked to allow iCloud to merge documents, contacts, and so on with the information on your iPhone. Do this as desired. (I do not yet use iCloud for most of this.) Your Photo Stream will eventually show up again by itself.
Hope this helps, and I'm all ears if there is an easier and potentially safer solution!
Matt

I have the same problem. Did you solve it already?

TV System Update hangs at 21% with message "Cannot connect to proxy server"

Hi,
just installed TVSU (latest version) on my Thinkpad T40 (with WinXP Pro SP3, German). Installs fine, runs perfect after reboot, recognises the correct model, initiates search for updates and then stops at 21% whilst displaying
"Downloading Packet Information: Lenovo Help Center (1 of 1)".
A few seconds later the error message
"Cannot connect to Proxy Server"
comes up with an OK-Box. Clicking OK terminates the entire update process, however TVSU continues to run properly and the process can be restarted with the identical result. This happens with Kaspersky Firewall on and off, no difference. Even rebooting the system w/o firewall and virus protection and starting afresh does not help either. Tried perhaps 15 times over the last 4 hours with same results. I assume that the error message refers to a proxy at Lenovo since in my local environment there is no proxy involved. The system is known to be free of viruses (clean installation yesterday and virus checked this morning).
Note:
The display/error message above were translated from German into English so the corresponding original English displays/messages may look slightly different.
Any ideas?
Regards from Germany...

I have discovered one other potential cause of this behaviour.
If your computer is attached to a Domain, ensure you are connected to the Domain using a profile that has administrator rights when attempting these upgrades.
I was using a local profile with administrative rights, on a network connection that was outside of the corporate LAN, and I was getting the "Cannot connect to proxy server" error.
When I connected to our Corporate LAN and logged on to the machine with an administrative profile, the Proxy Server error went away, and I was then able to connect and download my required updates.
Just an FYI if you are doing this inside a large, firewalled LAN running from Active Directory.

Sharepoint list dataheet view error "Cannot connect to the server at this time. You can continue working with this list, but some data may not be available"

I have a List which is having around 14000 items in it.while opening that list in datasheet view it is giving error .
Below is a summary of the issue:
After selecting datasheet view beow error occurs:
    "Cannot connect to the server at this time. You can continue working with this list, but some data may not be available."
    "Unable to retrieve all data."
    The item counts displays say 100 out of 14000 items.
Exporting List to excel is giving only 2000 records out of 14000 records.
Other Observations   -
This is happening to only one list on the site .There are other lists in the site whose no. of records is equal to 8000 to 9000.They are working absolutely fine without any error.
Also, If I am saving this list as a template and creating another list with it ,then it is working absolutely fine with 14000 records,so the issue does not seem to be related with no. of records as the template list is working fine.
I have checked the Alternate access mapping setting ,its fine.
It should not be related to lookup,datefield or any other column as the list created from it template is working fine with all these columns.
I checked below links also ,but doesn't seem to work in my case.
http://social.technet.microsoft.com/forums/en-US/sharepointadminprevious/thread/974b9168-f548-409b-a7f9-a79b9fdd4c50/
http://social.technet.microsoft.com/Forums/en-US/smallbusinessserver/thread/87077dd8-a329-48e8-b42d-d0a8bf87b082
http://social.msdn.microsoft.com/Forums/en-US/sharepointgeneral/thread/dc757598-f670-4229-9f8a-07656346b9b0

I have spent two days to resolve this issue. Microsoft has released two KBs with reference to this issue...but are not appearing in search results at the top.
I am sharing my finding.
1. First install the
KB2552989 (Hopefully you might have already installed it. The KB detetcts it and informs the user.)
2. Then update registry by adding new key for data fetch timeout as mentioned inKB2553007
These two steps resolved the issue in our environment. Hope it might help others as well.
Pradip T. ------------- MCTS(SharePoint 2010/Web)|MCPD(Web Development) https://www.mcpvirtualbusinesscard.com/VBCServer/paddytakate/profile

Can't save BISM file pointing to excel sheet (data source). ErrMsg: "There were errors found while validating the page: Cannot connect to the server or database."

Hi,
Me and a collegue is administrering our new enterprise BI portal in SharePoint 2013 (On Premise) and have a problem with using a specific Excel file including general ledger data as data source through a BISM file.
This particular BISM file can't be saved without getting the error message "There were errors found while validating the page: Cannot connect to the server or database."
BISM files against other Excel sheets and sources (for example SSAS tabular databases) works well.
Can anyone help us pinpointing whats wrong here, this is a really important stakeholder in our organization requesting this reporting?
Cheers!

Hi E.SWARD ,
My self created a Power pivot excel then i want to use this excel to create BI file . Still i am getting the same error . Pls help me to resolve this issue
Cannot connect to the server or database.
I am getting the similar error , if i use Tabular analysis server instance .
Subhash

My mini iPad will not connect to the internet. Getting a message that it cannot connect to the server. What is this and how do I fix it?

My mini iPad suddenly will not connect to the internet or retrieve my email. I'm getting an error message that says "cannot connect to the server". How do I fix this?

Nevermind. I found the answer from someone else's question. Thank you.

The restor pocess did not succeed because your computer cannot connect to the server - Windows Server 2012 R2 Essentials Experience

Hi all
I've been running Windows Server 2012 R2 with the Essentials Experience in test for a Windows 8.1 client environment, on an HP ProLiant MicroServer N54L. Overall I've found the Essential Experience set-up over WHS2011 and WHSv1 okay; still looking to extract
any real value over the former versions.
This box has been up and running for a few months now, with client backups of a Win 8.1 box scheduled and running successfully every day. However when trying to conduct any file restores from the backups, to the client, I receive an error dialog once I go
through motions from the Dashboard:
On the 'Devices' tab, right-click the appropriate client and select 'Restore files or folders for the computer'
'Restore Files of Folders' dialog pops up, asking me to 'Choose a backup' from the list of all the backups that have run
Select any one in the list - have tried numerous backups; automatic, manual, etc. same result every time
Brings up the dialog to 'Choose a volume', choose either C: or D: partitions of the same fixed drive - again, no difference which one I choose, the outcome is the same
'Opening the volume' dialog starts, with progress bar, runs to about 4% complete the pops up the dialog 'The restore process did not succeed'. Full error in the dialog, "The restore process did not succeed because your computer cannot connect to the
server. Make sure that the computer is connected to the networkm and then try again
If my computer cannot connect to the server - how can I get that far? How can I open the dashboard, select a client, select from a list of backups, select a volume to restore, etc. What is going on here?

Hi,
Please check if a "host" entry for the server is added to the client. For more detailed information, please refer to the threads below:
Unable to Restore files or folders from a Client Backup
http://social.technet.microsoft.com/Forums/en-US/d1d001bd-20c5-4f09-861d-526c31567963/unable-to-restore-files-or-folders-from-a-client-backup
Can't restore anything
http://social.technet.microsoft.com/Forums/windowsserver/en-US/98e269b5-2bd1-449e-a213-e386ae15266f/cant-restore-anything?forum=winserveressentials
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

HT1420 I am trying to rent a movie on my Apple TV and I keep getting the error message "Apple TV cannot connect to the server" What can I do to correct this problem?

Why does my Apple TV keep giving me the message "Apple TV cannot connect to the server" when I try and rent a movie to watch?

Hello dprice3885,
Thanks for using Apple Support Communities.
Take a look at the Wi-Fi troubleshooting since you can access the network but not the content.
Apple TV: Basic troubleshooting
http://support.apple.com/kb/HT6106
Apple TV (2nd and 3rd generation): Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS4546
Have a nice day,
Mario

Cannot connect MacOS X server to an Active Directory

Similar Messages

Maybe you are looking for