Cannot connect my C7280 wirelessly to my Netgear WNDR3400V3

Greetings,
Trying to connect my wireless Netgear WNDR3400V3 routher to my HP C7280. I enter the SSID and password, using WPA and get error: can not conect to network.
What am I missing.
Thanks,
AJ

Hi there AJ, aka @Senegal01 , welcome back!
I would suggest trying WPA Personal security if you are using WPA2, and also make sure these ports are unblocked:
Incoming (UDP) ports : 137, 138, 161, 427
Outgoing (TCP) ports : 137, 139, 427, 9100, 9220, 9500
Try running the wireless setup again and see if you can now connect.
Enjoy your Monday!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Similar Messages

Hello, my sister her macbook pro cannot connect to our wireless internet. My imac however can, so the problem has to do with her laptop. We were wondering how we could solve this problem? Thank you very much in advance!

Hello, my sister her macbook pro cannot connect to our wireless internet. My imac however can, so the problem has to do with her laptop. We were wondering how we could solve this problem? Thank you very much in advance!

We did that, but it just doesn't seem to be able to connect. So basically we tried to connect to our network and insert the password, but afterwards it does nothing. Weird thing is also that the network symbol (top right of the screen) says that it has been connected, but when I go look at the system preferences --> network, it states that it has not been connected

Since upgrading to Mountain Lion I cannot connect to my wireless router

Since upgrading to Mountain Lion I cannot connect to my wireless router. I have 2 wireless networks in my home. One is the primary whuch all of my devices connect to. The other is for backup only. I cannot connect to the primary with my iMac but have no trouble with any of the other devices which include iphones and ipads.phones and iPads. I can however connect to the backup without a problem. I have tried upgrading the firmware of the router as well as changing the security from WEP to WPA-2, no luck. Can anyone help?

Try this, it's for information.
In Finder, open the Go menu, press and hold the option key, 'Library' will appear on the menu, click and scroll to Application Support, open the folder and scroll to 'AddressBook-v22.abcddb'. Click on the file and press Command-I. Towards the bottom you'll see Permissions, tell me what they are please.

Cannot connect to the wireless networking

My Toshiba Laptop was preinstalled with Windows 7 Home premium 64-bit OS, and it had been working quite well with the wireless BB. However, the wireless internet connection was on and off within recent weeks, while the other mobile devices, such as iphone, ipad, or laptop, in my household had no such problem. The wireless signal was so strong, but the error message always said 'Windows cannot connect to the wireless networking'. It seemed there was something wrong with the wireless adapter.
I got a new TP-Link wireless adapter properly installed. Luckily, this worked; but unluckily, this worked for less than 24 hours. It was really frustrating that I, as a full-time student, depended so much on wireless networking.
Please help!!! Harry

Hi there
You may want to enlighten us with:
- What model are You using (f.ex. L300-123)
- What BIOS version is installed?
- What WLAN driver are You using?
All these questions are answered in PC Diagnostics found under Toshiba app folder in the start menu.
BR
Tom

Cannot connect Airport express wireless

Hello, cannot connect airport express wireless to linksys router. Connected now with ethernet cable but cannot figure wireless connection. My laptop cannot find the express while preforming setup scan, yet I'm connected to it. I can connect with my iphone but not wirelessly. Any suggestions?

....I was then told over the phone that airport express will not connect to third party routers.
This is NOT correct.
The AirPort Express will connect to a wireless network if you know the following:
1) The name of the wireless network
2) The exact setting for wireless security that the network is using
3) The wireless network password
Most users know 1) and 3), but very few know the exact type of wireless security settings that their wireless router is using. The Express will not connect to the wireless network unless it receives all of the information listed above.
So...we will assume that you know the name of the wireless network and the password for the network.
Do you know the exact type of wireless security setting that your wireless router is using? If not, the Express will not connect.
You may need to check the setup of your wireless router....or if the router was supplied to you by an Internet Service Provider, they may be able to tell you what type of wireless security setting is being used.
Post back when you have this info and we will proceed. There are still no guarantees that the Express will connect....but at least there may be a chance.

Cannot connect macbook to wireless network

Hey, I wonder if someone can help? I live in the uk & want to connect my nephew's macbook to his home wireless network.
His network is run off a Windows based pc, I have read in the forums that this is ok. He has a rather old pc that has no wireless card so I have installed a Netgear usb adaptor which runs just fine. The pc can "talk" to the Orange Livebox (Livebox -3660) and the pc can connect well, to the internet via the Livebox. So I have a stable internet connection.
The problem is that we cannot get the macbook ( a few months old only ) to connect at all to the net!
On the macbook there is no signal reading at all, airport is scanning for a network,it finds Livebox-3660 ok but when we enter the password the macbook says cannot connect!
Its curious that there is no signal reading at all on the macbook, yet it is right next to the livebox?
When I take the macbook home to my house, it connects immediately to my imac....full signal no problems. All systems go...
I must be missing something obvious ?? The security set up is currently WPA-PSK I dont know if this has a relevance? should I change this to make it more compatible to WPA2 ??
Much appreciate the help of the good people on this forum.
Thank you in advance. W

Sorted it!

Cannot connect 8500a to wireless network

i input the mac address during wireless network install but cannot connect printer to network

Do you have MAC filtering enabled? The printer will not like it plus it is not in the least a security measure. I recommend disabling MAC filtering and just set the encryption to WPA2 with a strong, 13+ character, passphrase.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Satellite Pro L300-1B9 cannot connect to my Wireless router

Hi!
I have activated the wireless nw on SAT L300 PRO 1B9 - but with many fight...
First I needed to find the switch to enable (I never though that it have... :-) ).
Then I needed to deinstall Atheros in Windows, and set the flags on (enable) in the Windows driver.
But in both Linux and Windows I couldn't connect to my Wireless router.
My luck was that some of my neightbours have security-disabled, open wireless network, what I could map to test.
The test was succecfully with that network, but my wireless router was unreachable.
From other machine I could reach it.
The result was:
If I set the router to broadcast the SSID, both OSs (Ubuntu + Windows) can use wireless network.
But if I disable the broadcasting (to protect my router), the network driver cannot use my router, it does not matter I pre-set the SSID...
A router is WRT54G, and it is working with other computers if I hide the SSID, but with SAT L300 Pro cannot connect (with this option).
Do anybody knows why? What I need to do to I could hide the SSID from the bad guys?
Thanks for any help!
Regards:
dd

I dont know which Windows OS do you use but if you use original Vista, I think, right WLAN driver is part of the package. So WLAN card must be installed properly.
It is not easy to say what is wrong there but if the notebook can see and detect your WLAN network on notebooks side everything must be OK. Try to restart your router and check all settings.
In my opinion there is some problem with WLAN settings.

Wireless LAN cannot connect with the wireless router with Windows 8.1

Hi,
I currently have a Lenovo V570 laptop with Windows 8.1 running on it. I cannot seem to stay connected to a wireless wifi connection for more than 10 minutes without it going "limited" and a yellow caution exclamation icon hovering over my connected wifi icon.
When it goes limited, I cannot access the internet whatsoever and it's growing increasingly frustrating. I used to have success by disconnected and reconnecting which seemed to temporarily solve the issue, but now even that is not working.
I did not have this issue (I don't believe so) when I first installed Windows 8 on this laptop a few years ago. This is an issue I've been dealing with for over a year now and only within the past 4-6 months has it been really bad.
I found this support page here which provides solutions for my problem but after attempting all of them, unfortunately none of them worked. The only time I experience no issues is when I directly connect an ethernet cord from my laptop to the router.
The wireless problem exists for all wifi connections, whether it be my university wifi, home wifi, local, etc.
Can anybody please help me out? I'd be more than happy to provide additional info to get this problem fixed once and for all.

Hi,
I currently have a Lenovo V570 laptop with Windows 8.1 running on it. I cannot seem to stay connected to a wireless wifi connection for more than 10 minutes without it going "limited" and a yellow caution exclamation icon hovering over my connected wifi icon.
When it goes limited, I cannot access the internet whatsoever and it's growing increasingly frustrating. I used to have success by disconnected and reconnecting which seemed to temporarily solve the issue, but now even that is not working.
I did not have this issue (I don't believe so) when I first installed Windows 8 on this laptop a few years ago. This is an issue I've been dealing with for over a year now and only within the past 4-6 months has it been really bad.
I found this support page here which provides solutions for my problem but after attempting all of them, unfortunately none of them worked. The only time I experience no issues is when I directly connect an ethernet cord from my laptop to the router.
The wireless problem exists for all wifi connections, whether it be my university wifi, home wifi, local, etc.
Can anybody please help me out? I'd be more than happy to provide additional info to get this problem fixed once and for all.

Photosmart B209a setup cannot connect to printer wirelessly

I've had a Photosmart b209a printer for about 2 years and used it with no problem. Couple of weeks ago upgraded to windows 8.1 and then neither of my two printers would print. Long story short, I restored the computer back to windows 8 (which was factory installed) and can now print on my laser printer but not the Photosmart. I have tried and retried installation and setup and always get the same problem: The IP address is visible on the router's list of network devices, it is visible on the printer's front panel in wireless settings, and when installing the software with USB it can see the IP address when trying to setup wireless connection. Then, the setup says it cannot connect to the printer. It sees the printer, attempts to contact the IP address, returns the following:
"Your computer is unable to communicate with your printer at 192.168.1.114. This may be caused by firewall software. If you are using firewall software, verify that UDP port 427 is unblocked for both inbound and outbound traffic.
Your PC can not communicate with your printer at address 192.168.1.114. Check all cable connections. Check that the printer, PC and router are powered on and connected to the network."
Obviously, the PC and router are turned on and connected. I even went to the security software and turned off the firewall AND created a new UDP port 427 and still no luck. What has happened to my printer???

Hey sue_M,
The first step that I would suggest, would be to run the HP Print and Scan Doctor. I have included the document 'Try the HP Print and Scan Doctor for Windows'. This will walk you through the download, as well how to use the tool.
Now to confirm a couple of questions with you.
1. What firewall do you use? (ie. Norton, Windows, MacAfee)
2. Do you just have the one firewall, or multiple firewalls?
3. For the UDP 427 port, have you made sure that this port is open in your router firewall?
Looking forward to your answers.
I worked on behalf of HP

MacBook Pro cannot connect to a wireless network

I am having the following problem with my MacBook Pro trying to connect to a wireless network using a 2WIRE Gateway wireless Router from Bell that worked perfectly until last night. My network preferences pane is saying "AirPort has the self-assigned IP address 169.254.227.XX and will not be able to connect to the Internet." I'm not a techie and I've tried everything I know and cant get my MacBook to connect to the internet using the wireless network in my home. I'm using ethernet connected directly to my router for this! It's killing me. Any help would be greatly appreciated.
Thanks in advance.

OK. The wireless network was selected. In the Preferences / Network pane I removed Airport by selecting it and hitting the - button and then created a new Airport by hitting + and selecting Airport. I'm getting the same result. Full network signal once the ethernet cable is connected. Greyed out icon with ! once I remove the ethernet cable and no internet. I appreciate your help so far. Any other thoughts? We also have an iPad, iPhobe, iPod, and two iMacs on the same network. All of them are connected no problem. My Macbook also still connects to the network in my workplace no problem. This all just started happenening yesterday and I don't believe I changed or upgraded anything. I just came home and it had stopped working.

Lenovo 3000 N100 notebook cannot connect to my wireless network

Hello,
this is my first post. I am new member. I also am a very novice/amateur computer user and so I need some help from some pros or anyone that has experienced a similar problem and can help fix my laptop. I have a Lenovo 3000 N100 laptop model number 0768 6EU. About a week ago I updated/downloaded a bunch of software upgrades from Lenovo's website recommended for this computer. Prior to this download I was able to connect to my wireless home network. But after the download of various required/recommended software upgrades it no longer connects to the wireless home network. my other laptops connect so I know that it is not my wireless router. I have tried various things recommended by the ThinkVantage access connection on my computer but I get the following on that: signal strength: 0%, status: disconnected, IP address: not assigned. I also ran the diagnostic tools and it gave me the following: connection status: disconnected, cause: wireless stack initialization failed, error code: 118, recommended action please check the wireless driver installation. I even went to the Intel wireless 3945 abg hardware properties window and pressed the tab to revert back to the prior driver for the wireless card. I would appreciate any help. I know this message/post is long but it is the only way I can explain what is going on

Hi
I have this problem also with my Lenovo 3000 V200.
Sometimes when I boot up the PC it will connect to the network and everything works just fine.
At other times, after boot, the "wireless stack initialization failed, error code: 118" problem occurs
and the only way to solve it seems to be a PC restart. Nothing else I do will bring the network up.
If I study the Networking tab in Task Manager it indicates that no adapters are available (wired eth.
access also fails). At a few occations connectivity have failed alltogether (i.e. a reboot have not solved
the problem). Last time this occured I had to reinstall the complete system (from a previous backup)
to get networking up.
I have tried different versions of Access Connections (5.02, 5.12, 5.21) and the same problem occurs
at seemingly random instances in time. This is obviosly a problem with the Access Connections software
since the Wireless networking works fine when I let windows manage it...
Anyone with a fix?
/Fredrik

Cannot connect my netbook wirelessly to newly inst...

Hi,
Just upgraded from HH3 to HH3 with infinity everything wireless in the household including my grandfathers pacemaker can connect to it wirelessly except my Samsung Netbook n130. Not an expert however worked fine then infinity installed and just wont connect wirlessly. Does connect on ethernet. Have spoken to india helpdesk 3 times and advised it was my norton antivirus which i uninstalled, this didnt work. then wireless card drivers which we upgraded, this didnt work, then switching wireless channel this didntwork, then using a different wireless key this didnt work. in the end they gave up. Then contacted the pay it service and they couldnt help so 3 days after install and 4 hrs on the phone and lumbered with mcafree instead of my favoured norton i am at the point where i just want normal broadband back can anybody help or experienced something similar?

Argh, your first post was a little misleading
So it does connect to the hub via wireless, but you get a browser issue when you attempt to use your browser?
And you don't get a browser issue when using Ethernet?
Go to the samsung website and check for driver updates there. Don't rely on windows
Nope, infinity or do you mean the home hub, is b/g/n not just g. As many on here suggest, You could try changing the hubs setting to just b/g as n devices are compatible on g anyway. However I do leave mine set as b/g/n with no issues
Erm the applet, that's not BTBB desktop help is it?
It's worth removing this if it's installed
what is the exact message displayed when you can't use your browser?
(sorry for the q's, just trying to help find the cause and a solution)
btw I don't think it was ever an antivirus issue.
-+-No longer a forum member-+-

WRT160N - Cannot connect to router wirelessly

I just bought the WRT160N and was able to run the setup on a wired computer and connect to the internet just fine. Now when I try to connect my laptops wirelessly, it does not even show my network as an option. I am going crazy! Please help...

Try this...
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Here select manual configuration...Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WEP, Encryption should be 64 bit.Leave the passphrase blank, don't type in anything...Under WEP Key 1 type in any 10 numbers please(numbers only and no letters eg: your 10 digit phone number) and click on save settings...Please make a note of WEP Key 1 as this is the Security Key for the Wireless Network...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...

Self-assigned IP****cannot connect to university wireless network

After i installed snow leopard I cannot connect properly to my university network. It says that a self assigned IP and cannot connect to the internet.
I have tried many things but nothing seems to change this problem
I need to be able to connect to the internet at school.

I have the same problem with the Exchange server at my work. Once I loaded Snow Leopard, no access. I can get on my Time Machine at home fine and can even access the open WAP at work, but since Snow Leopard access to the Exchange server is gone. The hype for Snow Leopard says easier access to Exchange services but I can't find any info on what that means anywhere. Anybody find the Exchange info?

Cannot connect my C7280 wirelessly to my Netgear WNDR3400V3

Similar Messages

Maybe you are looking for