Cannot connect my new nook to the airport utility wireless
I have a new nook and am trying to access the wireless to purchase a book and cannot do so. I think I know my password, but am not sure. I called Apple and they told me they did not have it and now I am studk. Help! Thanks!
I have the same problem. I can connect at the Barnes and Noble store and in my office, but I cannot connect at home. Other people can connect to Airport with MACs and PCs. Both my iPhone and iPad2 have no problems connecting. Is there anyone out there who can help?
Similar Messages
-
Suddenly, my time capsule will not allow more than one computer to connect to the internet at a time. On the Airport Utility on the internet tab, Connection Sharing is "Off (Bridge Mode)" When I try to change it to sharing an IP address, I get two messages that the beginning and ending DHCP addresses that the DHCP addresses I've entered conflict with the WAN address of my Apple wireless device."
Any ideas?
ThanksI use a DSL to connect to the internet. The modem is a Westell C90-810030-06. Two things happened in connection with the fail. I upgraded the firmware in both my Time Capsule (connected to the DSL) and the Airport Extreme (connected to my printer--used to extend the network). I also upgraded my Colof Nook to the Android Faux Tablet version. I can't imagine that that is creating some sort of mismatch.
I have now downgraded the firmware on the Time Capsule to 7.4.1 which is what I had before. Fortunately, I found the trick to downloading the older airport utility to find the older firmware. All the older versions disappeared from my computers.
I still have the same problem. Wifi works fine. If a second device connects to the wifi, then it works fine, but the first no longer has a connection.
And my Airport Extreme is not working at all. It cannot be seen by the computer. I tried resetting it. I'm going to connect it by ethernet and downgrade the firmware on it.
I appreciate any help. This is so frustrating. -
How can I get my new iMac to see my old Airport Express so I can play my music to a remote speaker?
Move the Mountain Lion version of Airport Utility to the Trash. Airport Utility is located in the Utilities folder.
Kappy, you cannot move AirPort Utility in Mountain Lion to the trash in a normal way. Apple will not let you do this.....It is part of the Mountain Lion operating system....and cannot be modified or trashed. -
How do I access an older AX in a newer vesion of the Airport Utility?
I have had an AX network for over 3 years and have had no problems with it. I just bought a new one to add to my network and I am having all kinds of problems now. Airport utility recognizes both units, but will not allow me to access the older one. It states "An error occured while trying to access the Apple wireless device. Make sure your network conection is valid and try again. Error -6765". Does anyone know what this means?
I did a factory reset of the older unit and I am still having the problem. I thought if I could update the software on the older one that it might work, but it won't give me access to do it.
Please Help!!!!!!!!!I found another thread from the June 3rd with the same issue. They seam to have a solution, but I am using windows. Does anyone know how to update older AXs on windows computers?
-
Airport Express set up a wireless network in my classroom. Apple TV is working but only recognizes the school network. I would like a solution other than connecting the two with a cable. That would require hanging cables since I am using apple TV to run a video projector.
Hi there,
I would recommend taking a look at the troubleshooting articles below and verifying that you have the Apple TV and Airport Express configured properly.
Apple TV (2nd and 3rd generation): Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS4546
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
-Griff W. -
The airport utility cannot find a configured base station. How do I connect?
I just bought a Airport Time Capsule and want to configure it. I plugged-in my broadband modem into the WAN port, but when I started-up the Airport Utility, it states the message ' No configured Airport base stations have been found'. How do I configure my Time Capsule?
It should show as new device in the airport utility..
If not, factory reset it and it will show up..
You do need a Mac with at least Lion and latest airport utility.. with wireless turned on.
Or you can download the airport utility for iOS and run it on your phone or ipad. -
I have a Power PC G4 which is running on OSX 10.5.8, it has the AirPort utility but cannot connect to the internet as my iMac can, I think I might need an AirPort Card? Is that the case or do I need something different to connect to a wireless modem?
Welcome!
Only one variant of the PowerMac G4 could use the faster Airport Extreme Card. The rest used the original Airport card that is pretty slow.
To get fast wireless without buying more than one thing, consider this:
http://eshop.macsales.com/item/Edimax/EW7722IN/
It goes in an available PCI slot
There are USB solutions also. However, all PowerMac G4 towers had only slower USB 1.1 ports, so any USB wireless adaptor can only run at about wireless 'B" speeds (slow) unless you also install a PCI USB 2.0 adaptor card. Doing that would allow a USB wireless adaptor to run at its maximum rated speed. These items working together would accomplish that:
USB wireless "dongle:"
Newer Technology MAXPower 802.11n/g/b USB Adapter + Plug and play direct or with extension cradle
USB PCI adaptor:
http://eshop.macsales.com/Search/Search.cfm?Ntk=Primary&Ns=P_Popularity%7c1&Ne=5 000&N=7069&Ntt=USB+PCI
Each approach has its advantages. The PCI wireless card is a one-piece solution that takes up no desk space. The USB2 card+USB2 Dongle gives you more fast ports for transferring date from other external USB devices (primarily cameras and external hard drives) at hugely faster rates than can the original ports. I have a USB 2 PCI card in my G4 tower strictly for transferring images from my digital SLR camera in a timely manner. -
I have just purchased and installed a new Airport extreme base station but now the Airport Utility cannot see my old Airport Express. Are their compatibility issues and do I need to purchase a new Express?
When you can, take a look at the old AirPort Express and locate the model number in the faint print on the side of the device.
If you see A1084 or A1088, this is an older Express version that is no longer supported by the current version of AirPort Utility that you are using with the new AirPort Extreme.
If that is the case, your Express is at least 6 years old...probably older...so it is about time to treat yourself to a new version with much faster speeds and more features. -
I am trying to setup my new time capsule but it is not working. after entering the airport utility and locating the TC, after I tell the program to continue, the unit just disappear from the menu and the setup menu says there is an error. I tried using the wireless connection, and also the cable, but none worked. Any idea of what could be happening?
What are you setting it up as.. join wireless network .. the very worst setup, it will disappear.. reboot the whole network in order modem. router TC.. clients and it will likely reappear.
Tell us what network setup you are using..
If you setup with cable to a computer completely isolated from the network with TC also isolated.. finish the setup of everything you want. .before update.. then plug it into the network. .then restart everything in correct order.. it will work most of the time. -
Bought 4th Gen 3TB TC - streaming TV over the internet is now so slow and now is constantly buffering. It seems the Airport Utility is always 'searching for new networks' - don't know if this is the problem. It's not the internet speed as checked that. I took my old router upstairs and was streaming TV via my ipad seamlessly - the same program via the TC was constantly buffering.
I just expected to be able to plug in the TC, so a simple set-up and experience wireless both upstairs and downstairs in my house. For some reason the range is low and speed veru disappointing.
I am far from being an IT expert but I would welcome advice about setting up this TC so we can enjoy the product as it was designed. Please HELP!No silver bullet........but my suggestions may drive you in the right direction.
1. Unplug the power cable from the TC and wait 10-15 minutes before powering back up. Seriously wait!
Proceed to #2 if this dosen't help.
2. Unplug the power cable from the TC, ubplug the power cable from your Broadband Modem (assuming it's a cable modem), disconnect ethernet, and cable from modem.
2a. Wait 10-15 minutes then re-connect cable, ethernet, and power back to modem (your modem should power up unless you have a power switch) wait for all the modem lights to come on EXCEPT activity.
2b. Connect ethernet from modem to TC, and plug in the power cable to TC.
Proceed to #3 if this dosen't help.
3. Reconfigure the TC.........Read here........http://support.apple.com/kb/HT3728
All really simple to do....if you need additional help let me (us) know. -
I have a stable wireless connection between my Laptop with Windows 7 and the airport extreme. But the airport utility software cannot find the air port extreme. The problem now is that I cannot install my printer which is connected via USB to the airport extreme. Can somebody help? thx
Try this Web page. These steps helped me. Hopefully this link works for you.
http://books.google.com/books?id=-yhGNt6fqkIC&pg=PT301&lpg=PT301&dq=%22For+Print er+Name+or+IP+Address+you+have+two+choices,+depending+on+whether+the+Windows+mac hine+is+connected+via+Wi-Fi+or+Ethernet+%22&source=bl&ots=q7h6Uvih-B&sig=XJOXFo9 yZmhRW6PPDafOKc4QywQ&hl=en&ei=C3DKTqOqE4S3twf7wJjNCw&sa=X&oi=book_result&ct=resu lt&resnum=1&ved=0CBwQ6AEwAA#v=onepage&q=%22For%20Printer%20Name%20or%20IP%20Addr ess%20you%20have%20two%20choices%2C%20depending%20on%20whether%20the%20Windows%2 0machine%20is%20connected%20via%20Wi-Fi%20or%20Ethernet%20%22&f=false -
My son gave me his airport express router and I use it to connect to the internet, but I cannot add the security since I don't have the CD that contains the Airport Utility (didn't even konw what this was until I checked apple website). Can I download this or do I need to order the CD? Any other options?
The Downloads and Manuals links on the main forum page below should do what you need.
http://www.apple.com/support/airport/ -
After I upgrade the AirPort utility, I cannot share my internet to my iPhone anymore.
After I upgrade the AirPort utility, I cannot share my internet to my iPhone anymore.
Please help me~~
軟體版本：
CoreWLAN： 2.1.2 (212.2)
CoreWLANKit： 1.0.3 (103.2)
附加選單： 7.1 (710.1)
設定外掛模組： 7.2.1 (721.3)
系統描述： 7.0 (700.3)
IO80211 系列： 4.2 (420.3)
WiFi 診斷： 1.0.2 (102)
AirPort 工具程式： 6.1 (610.31)
介面：
en1：
網路卡類型： AirPort Extreme (0x14E4, 0x8C)
韌體版本： Broadcom BCM43xx 1.0 (5.10.131.36.15)
MAC 位址： xx:xx:xx:xx:xx:xx
地點： RoW
國碼： US
支援的 PHY 模式： 802.11 a/b/g/n
支援的頻道： 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165
使用無線功能喚醒： 支援的
AirDrop： 支援的
狀態： 無關聯Welcome!
Only one variant of the PowerMac G4 could use the faster Airport Extreme Card. The rest used the original Airport card that is pretty slow.
To get fast wireless without buying more than one thing, consider this:
http://eshop.macsales.com/item/Edimax/EW7722IN/
It goes in an available PCI slot
There are USB solutions also. However, all PowerMac G4 towers had only slower USB 1.1 ports, so any USB wireless adaptor can only run at about wireless 'B" speeds (slow) unless you also install a PCI USB 2.0 adaptor card. Doing that would allow a USB wireless adaptor to run at its maximum rated speed. These items working together would accomplish that:
USB wireless "dongle:"
Newer Technology MAXPower 802.11n/g/b USB Adapter + Plug and play direct or with extension cradle
USB PCI adaptor:
http://eshop.macsales.com/Search/Search.cfm?Ntk=Primary&Ns=P_Popularity%7c1&Ne=5 000&N=7069&Ntt=USB+PCI
Each approach has its advantages. The PCI wireless card is a one-piece solution that takes up no desk space. The USB2 card+USB2 Dongle gives you more fast ports for transferring date from other external USB devices (primarily cameras and external hard drives) at hugely faster rates than can the original ports. I have a USB 2 PCI card in my G4 tower strictly for transferring images from my digital SLR camera in a timely manner. -
I cannot open a new page from the Firefox favorites menu, it worked before in other versions and this new 5.1 version, but stopped working a few days ago, uninstalled, downloaded a fresh program.. same problem exists. I usually leave my 'Home Page' as a stable page and just open 'new' pages for i.e. Google, Internet Banking etc. the '+' sign on my home page or other loaded pages does not operate, hate having to now constantly sign in to my hotmail home page if and when I open new pages, can you help?
Websites remembering you and automatically log you in is stored in a cookie.
* Create an allow cookie exception (Tools > Options > Privacy > Cookies: Exceptions) to keep such a cookie, especially for secure websites and if cookies expire when Firefox is closed.
Make sure that you do not run Firefox in Private Browsing mode.
* https://support.mozilla.com/kb/Private+Browsing
* In [[Private Browsing]] mode all cookies are session cookies that expire if that session is ended, so websites won't remember you.
* Do not use [[Clear Recent History]] to clear the "Cookies" and the "Site Preferences"
Clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords.
* http://kb.mozillazine.org/Cookies -
How to use the "identify" feature in new 6.3.1 airport utility?
how to use the "identify" feature in new 6.3.1 airport utility?
so you can find the basestations in larger networks?There is a workaround, which is to use Airport Utility 5.6.
I can confirm that 5.6 will run on 10.8.4 Mountain Lion, it will recognize the new 2013 Airport Extreme Base Station (A1521) running firmware 7.7.1, and it will give you access to view the device's Log & Statistics, DHCP Clients, and Profiles.
Four caveats:
1) The easiest way to install it is to download the app itself, not an installer or through the App Store. There is a page here where you can download the app: http://coreyjmahler.com/2013/03/08/airport-utility-5-6-on-os-x-v10-8-mountain-li on/ This way, you still have both versions, Airport Utility 6.x.x and 5.6.
2) When you launch 5.6, you'll get a message saying a newer version is available and asking if you want to update. Click Cancel to proceed into the utility.
3) When you click the Manual Setup button in 5.6, you'll get a warning dialog that "This version of AirPort Utility doesn't support this AirPort wireless device and might improperly configure the device if you continue to use it. Check www.apple.com/support/airport for the latest version of AirPort Utility." You can click Continue to get into the utility without issue.
4) You should probably only use 5.6 to view the additional status details. I have not tried to modify and save any AEBS settings using 5.6. There are other discussions here in the forums indicating that attempting to save settings via 5.6 that are no longer available in 6.3.1 will not actually save the settings to the AEBS even if both utilities indicate that the settings are changed. See https://discussions.apple.com/message/22677993#22677993
So, even though you can't use it to modify settings no longer available in Airport Utility 6.3.1, using Airport Utility 5.6 to view DHCP clients, Logs and Statistics is very useful for troubleshooting network issues.
PS - There are two ways to get to the DHCP Clients list, neither of which is obvious The first is to go to the Airport pane -> Summary tab and click on the "Wireless Clients:" label in the Summary display. All of the labels from "Wireless Mode:" down on the Summary display operate as links to view/edit the corresponding info/settings, which is also not obvious at first glance. Also not obvious, clicking on "Wireless Clients:" actually brings up a new pane with three tabs: Logs, Wireless Clients, and DHCP Clients. You can also get to the same pane by going to the Advanced pane and clicking on the Logs and Statistics button.
I hope this is helpful information. Took me a while to find out how to do this.
Maybe you are looking for
-
Hello,Who can help me to check out the problem in my VI.The graph won't be shown after generate. Attachments: HTML Report Generation.vi 56 KB
-
HI I AM NEW TO ABAP..CAN ANYONE PROVIDE WITH A STEP BY STEP GUIDE TO ALV PROGRAMMING AND MODULE POOL PROGRAMMING
-
Screen broke on my mac, its bleeding colors and it has cracks in it and it has dark ink spots on it can how can i fix this ????????? I want to at least slow the cracking and bleeding of the LCD/ pixels
-
Revision: 17565 Revision: 17565 Author: [email protected] Date: 2010-09-02 17:30:08 -0700 (Thu, 02 Sep 2010) Log Message: Fix FM-937: ProxyElement dispatches trait events for blocked and overridden traits. Add unit test. Ticket Links: http
-
I am in a weird iPad data plan hell. A few days ago I tried to sign up for a month's data. I entered the wrong phone number while signing up. I made many calls with long wait times. When I do finally get through the call usually drops & no one call