Cannot connect network drives through network switch

macmini cannot see network drives connected to airport extreme. Network drives are connected through dlink 48 port 1 gig switch.How can
I edit airport extreme to see these drives?

The switch will be unlikely to have anything to do with the problem.. but bypass it and see.. plug a laptop or something directly into the extreme.. do the disks now show up?? If not the Extreme setup is wrong.. if they do and you can transfer files.. something is odd with the switch and you will need to work with dlink to figure if it is blocking some protocol.. Tell us how this test works out.. you can force the mac to use SMB by manually mounting the drive.. No switch is going to block SMB.
Do the external drives show up on the extreme in the airport utility?
Have you turned on file sharing?
Make sure in finder preferences you have enabled network drives.
No go, are the drives formatted correctly.. they must be HFS+ or FAT32 format..
I used to say GUID partitioned but not sure now..

Similar Messages

Cannot connected network sharing from my iphone 4 to ipad mini after upgrade iso7.0

After upgraed to ISO7.0, my ipad mini cannot connected network share to my iphone 4.

I have the same EXACT problem. it won't play some of my videos, any youtube videos (says it cannot connect to server) and won't play a lot of other internet videos

I cannot connect to the internet after switching providers. I've changed the email address associated with the new account but am sure there is something else I need to change. Can anyone help me?

I cannot connect to the internet after switching providers. I've changed the email address associated with the new account but am sure there is something else I need to change.   I have also changed the apple information as well including user name and password. Can anyone help me? (This is an ipad question).

Apple ID: Changing your Apple ID
http://support.apple.com/kb/ht5621
Using your Apple ID for Apple services
http://support.apple.com/kb/HT4895
Apple ID: What to do after you change your Apple ID
http://support.apple.com/kb/HT5796?viewlocale=en_US&locale=en_US
iTunes Store: Associating a device or computer to your Apple ID
http://support.apple.com/kb/ht4627
iOS: Changing the signed-in iTunes Store Apple ID Account
http://support.apple.com/kb/ht1311
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at
http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are drooping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.hmL
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Signal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Cannot connect to VPN through NetworkManager anymore.

I cannot connect to VPN through networkmanager anymore. Last time used it, it worked perfectly but I don't use it so often and last time was 2-3 months ago. So I don't know what went wrong, or which package upgrade broke it.
I switched to systemd a month ago, it may or may not be related.
I can still connect from the commandline using the vpn/vpn-disconnect tools.
All that happens is an alert windows saying: "The VPN connection '......' failed because there were no valid VPN secrets." And here is the journal:
NetworkManager[355]: <info> Starting VPN service 'vpnc'...
NetworkManager[356]: <info> VPN service 'vpnc' started (org.freedesktop.NetworkManager.vpnc), PID 9214
kernel: tun: Universal TUN/TAP device driver, 1.6
kernel: tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
NetworkManager[356]: <info> VPN service 'vpnc' appeared; activating connections
NetworkManager[356]: <error> [1349687970.426748] [nm-vpn-connection.c:1405] get_secrets_cb(): Failed to request VPN secrets #3: (6) No agents were available for this request.
NetworkManager[356]: <info> Policy set 'MYSSIDOMITTED' (wifi0) as default for IPv4 routing and DNS.
NetworkManager[356]: <error> [1349687973.943758] [nm-vpn-connection.c:1405] get_secrets_cb(): Failed to request VPN secrets #3: (6) No agents were available for this request.
NetworkManager[356]: <info> Policy set 'MYSSIDOMITTED' (wifi0) as default for IPv4 routing and DNS.
NetworkManager[356]: <info> VPN service 'vpnc' disappeared
All neccessary vpn packages for networkmanager are installed.
Google did not turn up any useful info other than a few year old threads saying "upgrade your networkmanager".

Well, I managed to get the auth dialog to show up reliably by applying a couple patches from this Bugzilla: https://bugzilla.gnome.org/show_bug.cgi?id=679212
Still getting breakage in that it's not properly authenticating:
Attempting to connect to redacted:443
Using client certificate '/CN=redacted'
Client certificate expires soon at: Dec 5 02:57:05 2012 GMT
SSL negotiation with somesite.somedomain.com
Connected to HTTPS on somesite.somedomain.com
GET https://somesite.somedomain.com/
Got HTTP response: HTTP/1.0 302 Object Moved
SSL negotiation with somesite.somedomain.com
Connected to HTTPS on somesite.somedomain.com
GET https://somesite.somedomain.com/+webvpn+/index.html
GET https://somesite.somedomain.com/CACHE/sdesktop/install/binaries/sfinst
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Failed to read from SSL socket
Error fetching HTTPS response
This behavior is not what I'm getting from the command-line client, of course, so... still digging.

I wanted to know whether i can diffuse music to the bluetooth only speakers from a airport extreme-connected hard drive through my mac?

I'm interested in the new soundlink mini Bose wireless speakers that function only via bluetooth. I wanted to diffuse music to them from an airport extreme connected hard drive through my macbook air. I don't want to stoc music on my mac given the limited flash drive and don't want to go though wires again. Is that possible? Also I can't go with airport express since those speakers don't have the airplay function.
Thanks a lot for your help or ideas

Hello jeri004,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes for Mac: Moving your iTunes Media folder
http://support.apple.com/kb/ht1449
Best of luck,
Mario

Do mutiple 6120 cross-connect (heartbeat) work through a switch?

We have two 6120s connected to two UCS 5108s in two separate rooms in our building. We have just completed a 2nd formal server room and will be moving one of the 6120/5108 pairs into that room. Currently, the 6120's are cross connected (1Gig copper) to each other and all of the 10Gig connections are appropriately connected.
The issue is that the two server rooms are more than 100m apart so there is no copper connections between the rooms. We have switches in each room connected via 10Gig fiber.
Our VAR who installed originally this sent an e-mail that these 1Gig copper cross connects must not pass through a switch. He has left to get married and is gone for a few weeks.
We are not moving this until November, but I'm not willing to wait a couple of weeks until the engineer returns to get the answer to this question. I have looked on CCO and other than identifying the 1Gig ports as "cross-connect" or "cluster", I can't find anything out.
I would think that they would work through a switch, perhaps in their own non-routed VLAN or something.
Will this work? Is there a design guide on CCO that shows it?
Thanks!
/alan

Alan
What you are asking for is an enhancement which I fully agree with.
Latency is not the issue here. It is how the software which manages the L1-L2 links on the FI's.
They are bonded internally. Not expecting any other traffic (CDP, BPDU or anything else when you connect to a switch for example amongst other things). You connect a switch in between and bonding breaks. You could now potentially think of 1 link to get around bonding or turn channel-group explicitly on the switch etc..
But the fact of the matter is that it has neither been tested/blessed nor advertised as a possible workaround.
So currently it won't work and *if* it does, you are in unchartered territory where support if something breaks is going to be an issue.
If you look at the User Guide at
http://www.cisco.com/en/US/docs/unified_computing/ucs/sw/gui/config/guide/b_GUI_Config_Guide.html
Page 63 and 65 have references to it -
The L1 ports on both fabric interconnects are directly connected to each other.
The L2 ports on both fabric interconnects are directly connected to each other.
To use the cluster configuration,the two fabric interconnects must be directly connected together using Ethernet cables between the L1 (L1-to-L1) and L2 (L2-to-L2) high availability ports,with no other fabric interconnects in between.
Note: I would have written "with no other *switches* in between" rather than fabric interconnect above but then thats me.
The 10 Gig links cannot be used for heartbeat either. All mgmt is the 4 1 gig ports that you see on the FI's. 10gig's are data.
Sorry to be the bearer of the bad news
--Manish

After a while, cannot connect to WRT320N through 192.168.1.1

I have a WRT320N with latest firmware 1.0.03.
Everything works OK other than the fact that after a while (hours / days) I cannot connect to the router through http://192.168.1.1 but I have connection to the internet though. If I restart the router, I cannot connect to it but after a while I can't do it again. When I try, browser stays for minutes and eventually gives me the "Page not found error". This is happening from any computer (I have 4 computers wired and 2 wireless). The wired computers are connected through a GbLan switch and they have different OS: Vista(x64), XP(x86), Windows Server 2003 (x86) and Windows Server 2008 (x64). The 2 computers wireless connected are Windows 7 (x86) and Windows 2000. From all of them I have the same problem and after restarting the router I can connect again from any.
This behavior had been in place from the beginning but not being under pressure because I rarely have to change something in router's settings, I did not report it in time and now it seems is out of warranty.
My question is if this is something that happened to others (but I was not able to find any similar reports) or is it something wrong with my router? As I said before, other than that, router is functioning without any issues.
Thank-you

Is someone using bittorrent or any p2p software? p2p software, downloading using torrent opens a lot of TCP port, hogging the router's resources. Thus, accessing the router's gui is sluggish or not even opening up.
Upgrade the router's firmware.

CANNOT CONNECT TO WIFI THROUGH IPOD TOUCH 4G..ROUTER REQUIRES USERNAME AND PASSWORD..HELP NEEDED

i have a ipod touch 4g...and my router requires WEP key and a username and a password when i connect to it through my laptop..ipod touch only asks for a password i.e. the WEP key..question is how to enter the username and the password in ipod touch?

my service provider has provided me with a username and a password..therefore my router is "NOT ALWAYS CONNECTED TO THE INTERNET"..also PPPoE is enabled...
i think i ll have to call the ISP and tell him to remove the username and password...because i dont think that ipod has a provision for entering passwords other than the WEP key..

Cannot connect to VPN through Time Capsule.

I have setup a VPN but my buddy cannot connect to it unless he bypasses his Time Capsule (2011 model) and connects his Mac directly to his cable modem.
The Time Capsule is setup with DHCP to lease out a different IP range than my VPN.
We have looked over all of the Time Capsule settings and cannot seem to find anything wrong.
My brother has a similar setup except using just a nornal Air Port Extreme and has no problems connecting to my VPN.
Any suggestions would be appreciated.
Thanks.
-Jeff-

Port forward using the v5 utility.. I have strong suspicions about the v6 for port forwarding.
It does depend on what particular VPN you are talking about.
Check what ports are required.
You can load v5 utility even into Mountain Lion .. as well as later Lion versions thus and so.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
Leave the package open on the desktop so you can see the file. AirportUtility56.pkg
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. If your Mac refuses to run the software, because it wasn’t downloaded from the Apple store, go to security in preferences and allow other software to work.. this is limitation of trade methinks. You can set back later if you like.
Now drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. in finder, open the new directory, drill down.. applications, utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall version 6 (now 6.3 if you updated) so don't try.. and you cannot or should not run them both at the same time.. although I have had no problems when doing so.

Cannot connect iMac & Mini through network

iMac & Mac Mini will not connect through wifi network. Rang broadband company & they said they can't help!
iMac 10.6.8 Snow Leopard 21.5inch screen (late 2009)
Mac Mini Lion (early 2012)
I don't think the operating systems would cause a problem.
Sharing settings on:
DVD & CD
Screen
File
Printer
Internet
Please can someone give me some advice.
Thanks in advance.

Very sorry, I added it to the wrong topic! Must see if I can change it...
Yes it's file sharing & CD/DVD sharing.
Thanks for your reply.

Cannot Connect to Domain Through Wireless Connection

Hello TechNet Gurus,
As the title suggests, I am having issues connecting to my domain through a wireless connection. I am running Windows Server 2008 R2 (Data Center and Enterprise) to build my understanding of server administration to supplement my undergraduate
coursework (B.S. Computer Engineering & Cyber Security minor). So far I have a working domain controller attached to a switch that I re-purposed from an old WRT54G Linksys router. In turn, the switch is attached to a WRT54GS Linksys router.
When connected through physical media, the domain controller works as expected. I can connect to the domain from two personal laptops running Windows 7 Professional and from two virtual environments running Windows 7 Enterprise. Through these connections, I
can divvy out group policy, access network drives, and other services successfully. However, I attempted to connect wireless, and when I do, I continually get an error indicating that my username/password is incorrect. I carefully re-input the login information
(over-and-over), and I even recreated the user/computer objects. All to no avail.
After a couple of days of research between classes, homework, and work, I found some promising tips:
Added the following entry to the registry for the local machine: %comspec% /c netsh wlan connect name="JBnetwork"
Added the following local group policy (using gpedit.msc): Computer Configuration\Policies\Administrative templates\System\Logon\Always wait for the network at computer startup and logon
Unfortunately, the above tips have not resolved the issue. From what I understand, the issue stems from the order that the wireless software and domain authenticate. I have also read that this may purely be a networking issue that is not directly related
to Active Directory or Windows 7 configurations. Whatever the situation is, this has me completely stumped and I could use some expert advice.
This is my ipconfig, for the reference:
Connection-specific DNS Suffix . : jbnetwork.local
Description . . . . . . . . . . . : Broadcom 802.11n Network Adapter
Physical Address. . . . . . . . . : 88-9F-FA-88-FA-44
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::18d8:7f74:26a0:c429%10(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.14(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Tuesday, August 05, 2014 10:08:35 PM
Lease Expires . . . . . . . . . . : Wednesday, August 06, 2014 10:08:34 PM
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.3
DHCPv6 IAID . . . . . . . . . . . : 294166522
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-19-1E-03-7F-88-9F-FA-88-FA-44
Thanks to anyone who can help!

@Zanderol24,
Thanks for following up with me. I completely forgot about this post because I was able to figure out a solution by poking around in Group Policy.
The issue was a pretty simple fix. I tweaked the wireless policy a bit: Computer Configuration > Policies > Windows Settings > Security Settings > Wireless Network (IEEE 802.11) Policies.
Thanks again!

Cannot Connect To Wireless Through Windows 7 Bootcamp

Hey guys,
To start, I have the retina display Macbook Pro with Mountain Lion, meaning I have no ethernet port or optical drive, so any of those fixes are out of the picture.
I recently installed Windows 7 through bootcamp and I found I had no internet. So I googled it on another computer that was using the same wi-fi and found out that I hadn't installed my mac drivers, simple enough. So installed them through the USB I used during bootcamp.
After installing the drivers, the error of "You have no network drivers" dissappeared and it showed my networks. So I clicked on the network that my OS X connects to, and less than a second after I typed in my credentials and pressed enter, "Windows was unable to connect to (network name)" popped up. So, I clicked "Troubleshoot problems" and it told me that "Troubleshooting coudn't identify the problem."
I thought I'd check random different options, so I typed in random credentials that I'm sure nobody has on this network (User: ahsdeu, Pass: hshah), and I get the same problem. Maybe it's my User/Pass then? No, I use the same credentials on my OS X, and it's working just fine. I used my guest profile to be sure I was logging in to the connection on OS X from scratch. And the internet IS working, I can use Safari just fine.
All nearby wi-fi networks are password protected, so I can't try using one of theirs.
I went to the internet and googled this problem, but the only solution people were giving was install the drivers through CD/USB. But I already did that.
Here's the settings on my Broadcom 802.11n Network Adapter:
Device type: Network adapters.
Manufacturer: Broadcom
Location PCI bus 4, device 0, function 0
Device status: This device is working properly.
The driver is up to date (or so it says).
As far as the network settings go, the IP, Subnet and Gateway are all set to auto (I already tried putting in manual information I got from another computer attached to the network, didn't work). It is enabled (tried disabling then renabling).
I turned off firewall, no dice. I've tried re-instaling the setup from my USB with the "repair" option with no success.
One more random note, sometimes instead of giving me the "Windows was unable to connect to..." error, it asks for my credentials again. THEN it tells me the error.
I know it's a lot to read, but I figured I'd try and reduce the amount of questions by being very specific in explaining my problem.
Thank you in advance for any help at all. I hope somebody out there can help me and any future users who encounter this problem.

I'm having the exact same problem although I have Windows XP. I submitted an email to iTunes Support, but the auto response I got indicated that I would have to wait up to 48 hours for a response. I'm pretty annoyed by that. I can't believe there isn't a phone number I can call for help. Someone just told me that if I had a protection plan I could call, but as much money as I spend on iTunes already........

Cannot connect to internet through AirPort in Costa Rica - HELP!

Hello,
I have been traveling Costa Rica for the past few days, and have had no problem connecting to WIFI across the country, but, tonight, I am not able to connect. I clicked on my AirPort icon > Open Network Preferences. The Status reads "On", BUT under the status is a message that says:
"AirPort has the self-assigned IP address 169... and will not be able to connect to the internet."
Reading through the posts here, I have tried several fixes...
- Renew DHCP Lease
- Repair permissions
...And still no luck.
I have no access to the router itself, because I am staying at a bed and breakfast. Anyone have any other ideas?
I really appreciate your help in advance. I love this community!
Sincerely,
Nathan

Hey,
This is obviously seems to be a DHCP problem, do you have any other wireless devices with you like an iPhone, iPad or just any wireless capable device ? If yes, try to connect through it and see if it will obtain a valid IP address successfully, if it didn't, then surely it's a router issue that it isn't able to distribute IP addresses, if you don't have a second device, can you see any ethernet connections in the wall ? another solution is to contact the IT person at your location and ask him if you should configure your network settings manually and if so, what would be the settings. Sometimes something as simple as restarting the router fixes similar issues

Cannot Connect Printer Driver

In our Network Connect HP Laserjet 1320 printer to windows 7 proffesional computer.Some Users can print documents and sometimes cannot pinting.when we connect to the printer these messeges are arise.but some computers can print.I want to know what is the issue and what is the soulution for this??? Please reply me

Hello SHONAR, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are having issues using your printer. I would like to help with that today.
I would recommend downloading and running the HP Print and Scan Doctor.
I would love to try and help you further, but I do need a little information on your printer first. I am linking an few HP Support document below that will show you how to find your product number. With this information, we can provide you with accurate information.
How Do I Find My Model Number or Product Number?
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Cannot connect to Serv through my computer's Oracle SQL Developer client.

Connection issue:
When I try to connect to the server , I receive the following message:
“An error was encountered performing the requested operation:
IO Error: The Network Adapter could not establish the connection
Vender code 17002”
The odd thing is that I am able to connect through the Citrix SQL Developer using the same settings. My internet connection is working fine, and I am not connected to a VPN.
Please assist me.
Thanks,
Vas

905508 wrote:
Connection issue:
When I try to connect to the server , I receive the following message:
“An error was encountered performing the requested operation:
IO Error: The Network Adapter could not establish the connection
Vender code 17002”
OS/Networking mis-configuration!
Oracle is the victim; not the culprit.
Root cause & fix are external to Oracle.
Is any type of OS Virtualization involved here?

Cannot connect network drives through network switch

Similar Messages

Maybe you are looking for