Cannot connect on local net via Bonjour
I have two iMac connected on a local router network. On Snow Leopard I could connect from each to each without problem. After upgrading to Lion, there is a problem. Using Finder/Go/Connect to Server, I can set up the afp addresses and connect OK on both. On each iMac, Bonjour finds the other iMac and puts its name in the Finder window under Shared. BUT, when I try to connect it shows "Connection Failed". If I then select Connect, I get a window from which I can connect as Guest, BUT not as Registered User. Is this a known bug?
Thank you kane_TO. I have an iMac (2006) set up with OS 10.7 and an iMac 2012 with OS 10.8. I have knocked my head against the wall repeatedly to get them to share files, and finally gave up. Your post gave me a clue. I was sharing a folder and also folders within that folder. That worked OK in 10.6.8, but apparently these OSs did not like it. I reduced the shared folders only to the top level folders, and magicaally, it works!
Similar Messages
-
Cannot connect to Mavericks server via AFP
Yesterday we had our server rebuilt. I have added a couple of users and a group with read/write access.
I can only connect to volumes via SMB://10.XXX.XXX.XX
When I try AFP://10.XXX.XXX.XX
I get the following error:
‘There was a problem connecting to the
server "10.108.172.134".
Check the server name or IP address, and then try
again. If you contintJe to have problems. contact your
system administrator.'
With SMB connection I am getting errors trying to copy files to the server.
The error is:
‘The Finder can’t complete the operation because some data in “e.g File” can’t be read or written.
(Error code -36)’
Any ideas guys?
I can’t get hold of our IT guy today.
Mac Pro 2 x 2.8 GHz Quad-Core Intel Xeon
OSX 10.9.5
Server 3.2.2Hi Team,
I am facing the same issue and I am using Oracle system user credentials to connect Oracle server and I have also installed extension pack for the SQL Server instance which i am using for migration. Still I am getting the following error in last step (Migrate
data).
Cannot connect to Oracle server via SQL Server tester extensions.
Oracle
10.2.0.4 verion
SQL Server 2012 SP1
SSMA 6.0
Please help me if you have gone through the same problem.
Thanks,
Vijaysqldb -
Cannot connect to SGD server via proxy
Hello
We have a recently installed SGD server running.
Some clients have been setup today with accounts to access it but none of them can get on at the moment. The error message presented is as follows:
Cannot connect to the server sgd.ourdomain.co.uk:443
The HTTP proxy "NTLM" at devicename:8080 failed to connect to the server sgd.ourdomain.co.uk:443
The following response was returned:
HTTP/1.1 403 Forbidden
Clearly there's a proxy/firewall getting in the way.
Client has tried to connect from a network that is behind a different firewall and has been sucessful.
I'm hoping to get further details on the proxy/firewall setup but this could take a while.
Has anyone encountered this previously and if so, can any solutions be suggested.
Thanks,
RobHi Team,
I am facing the same issue and I am using Oracle system user credentials to connect Oracle server and I have also installed extension pack for the SQL Server instance which i am using for migration. Still I am getting the following error in last step (Migrate
data).
Cannot connect to Oracle server via SQL Server tester extensions.
Oracle
10.2.0.4 verion
SQL Server 2012 SP1
SSMA 6.0
Please help me if you have gone through the same problem.
Thanks,
Vijaysqldb -
Cannot connect to the net using my wi fi on my blackberry curve
hi there, i cannot connect to the net using my wi fi on my blackberry curve 8520. wen i go in to settings and click on to manage connections it as a tick at the side of wi fi and says TALKTALK- 3B0BD4 and a tick at the end. if i turn my mobile network of my signal goes, and when i try to connect to the net a message comes up saying unable to connect to the internet, please try again later. if the problem persists please contact your service provider.when i try to set up a new wi fi connection and scan for networks it comes up with TALKTALK-3B0BD4 and undernieth it says connected and the signal is full at the side of it? many thanks maria
i cannot browse the internet thru wifi using bb curve 9360..when i checked my wifi settings it says that im already connected but when im trying to browse it says cannot connect contact your service provider
-
i cannot connect to the net using 3G, i have ipad2 16GB, i have tried resetting my ipad2, and resetting the network setting, my location is here in riyadh, everitime i try to connect to the net theres a pop message saying "could not activate cellular data network, please help me guys thanks.....
Thanks for the quick response. No, I did not get any error messages or any terms-of-usage screen. The employee I told my problem to was not computer savvy either. She just suggested I move to different spots w/in the library to see if that would make a difference. It didn't. When I connected to the library WiFi it did change the Verizon 3G that is usually in the upper left corner to iPad with two to three emanating arcs. I may have to go to the library in the next town. I was able to connect to theirs in the past when I had to download something greater than 20 MB. Unless I really want it, I will probably not even try to download something more than 20 MB due to the hassle. Yeah, I may have been better off getting a normal desktop or laptop and getting WiFi at home. To do that now would mean having my iPad 2 and a desktop computer, which I feel is extravagant. (I know there are a lot of big spenders out there who got the iPad as additional gadget for fun. This is a rich country.) A Verizon rep told me I couldn't set up a WiFi router at home just using an iPad. So it seems like a person who just uses 3G is limited to surfing the net (not even much YouTube because it eats a lot of data) and using email. I read about an app that helps print wirelessly using 3G, but a reviewer said you had to be an engineer to get it done right. BTW, I like the Steelers. I'm old enough to remember Franco Harris and that blond guy whose name escapes me back in the '70s. Since I live in North Jersey I feel I have to support the Giants. But I know football about as well as computers.
-
from the xserv where i am setting up a website i cannot access local host which is preventing me from setting up phpmyadmin config file. I open safari and type in http://localhost/ and i get the error message cannot connect to local host. I can access the server using the ip (no domain setup yet). I am a novice at setting up web serves in the mac/apache environment so i may have missed a simple step somewhere. Any help would be appreciated.
Hi, and a warm welcome to the forums!
No expert here, but have you tried http://127.0.0.1 ?
Might get better help in the xserve, or Server forums here. -
Cannot connect to Local Libraries' Wi-Fi via my La...
I have been having problems connecting to the wi-fi of my local library via my laptop for the last couple of weeks, after not having any problems connecting before.
I am able to connect to BT's wi-fi service, but when I try to log in to my local library's (Hackney Libraries) wi-fi, I get a message that the DNS is not recognised.
The libararians say that I should contact my internet service provider (which is BT), but I have since had problems contacting BT via their live chat service.
Is this a fault with my ISP or could it be my laptop?Have you manually changed the DNS settings on your laptop at any point? Unless you have a good reason to do otherwise, it should normally be set to "Obtain DNS server address automatically". This setting is buried deep in the network options on Windows.
Some parental control systems will detect attempts to use 3rd-party DNS servers, and will block them. This is because switching DNS servers could be used to bypass the parental controls. i can imagine that most libraries would have something installed to prevent people looking at "dodgy" web sites while in the library. -
ARD3.1, can connect on local net, but not out to home over internet
I'm stumped on this one,
Checked my Port Forwarding on Router (Netgear R614)
checked my firewall settings, all ports properly forwarded
both client and admin are running ARD 3.1
if I'm on the local network, the admin will connect
to the client either through Bonjour or Local Network.
But if you try and connect via Internet WEb address,
as published on whatismyip.com, an error stating that it cannot
connect is given.
any help much appreciated.I too am having this same problem. Host computer is running ARD 3.1, with verizon dsl, no firewall, no router. Client computer is running ARC 3.1 with verizon dsl, no firewall, no router. It worked at home when both computers were on the same intranet, but now that they are on the internet, I can not get a connection.
When I initiate observe or control, I get "Connecting to "pool-72-82-XXX-XXX.cmdnnj.east.verizon.net". Then it times out with "connection failed to...". I tried pinging the address and get a return. Not sure what to do. If I still have to enable port forwarding or opening ports, I have found instructions in other posts. But I figured since I did not have a firewall or router active, at least during the test phase, I shouldn't need to open any ports. Any guidance would be appreciated. Sorry to step on the OP, but a question was posed to him and he did not reply yet.
John -
HT1725 I cannot connect to itunes store via iphone4
suddenly my iPhone4 says: Cannot connect to itunes store.
How do i solve this???I was having the same problems after downloading 10.4.1 IStore would only download half way then nothing attempted reinstall no goood checked the Diagnostics with IPad connected, indicated no errors. more than a few hours browsing possible solutions. Found one stating 'Remove all Itunes connected software, i.e. Bonjour, ITunes, Safari etc from PC via the Uninstall Safely Feature and ReInstall. Hey Presto it worked now no issues.
Good Luck. I am using Windows 7.
That's my problem exactly, but I can't find the: ''Uninstall Safely Feature and ReInstall''. Where is that??
Thank You -
Cisco ASA 5505 IPsec client VPN - Cannot connect to local hosts
I have created a Cisco IPsec vpn on my ASA using the VPN creation wizard. I am able to successfully connect to the vpn and seemingly join the network, but after I connect I am unable to connect to or ping any of the hosts on the network.
Checking the ASA I can see that a VPN session is open and my client reports that it is connected. If I attempt to ping the client from the ASA all packets are dropped.
I suspect it may be an issue with my firewall, but I am not really sure where to begin.
Here is a copy of my config, any pointers or tips are aprpeciated:
hostname mcfw
enable password Pt8fQ27yMZplioYq encrypted
passwd 2qaO2Gd6IBRkrRFm encrypted
names
interface Ethernet0/0
switchport access vlan 400
interface Ethernet0/1
switchport access vlan 400
interface Ethernet0/2
switchport access vlan 420
interface Ethernet0/3
switchport access vlan 420
interface Ethernet0/4
switchport access vlan 450
interface Ethernet0/5
switchport access vlan 450
interface Ethernet0/6
switchport access vlan 500
interface Ethernet0/7
switchport access vlan 500
interface Vlan400
nameif outside
security-level 0
ip address 58.13.254.10 255.255.255.248
interface Vlan420
nameif public
security-level 20
ip address 192.168.20.1 255.255.255.0
interface Vlan450
nameif dmz
security-level 50
ip address 192.168.10.1 255.255.255.0
interface Vlan500
nameif inside
security-level 100
ip address 192.168.0.1 255.255.255.0
ftp mode passive
clock timezone JST 9
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
object-group network DM_INLINE_NETWORK_1
network-object host 58.13.254.11
network-object host 58.13.254.13
object-group service ssh_2220 tcp
port-object eq 2220
object-group service ssh_2251 tcp
port-object eq 2251
object-group service ssh_2229 tcp
port-object eq 2229
object-group service ssh_2210 tcp
port-object eq 2210
object-group service DM_INLINE_TCP_1 tcp
group-object ssh_2210
group-object ssh_2220
object-group service zabbix tcp
port-object range 10050 10051
object-group service DM_INLINE_TCP_2 tcp
port-object eq www
group-object zabbix
port-object eq 9000
object-group protocol TCPUDP
protocol-object udp
protocol-object tcp
object-group service http_8029 tcp
port-object eq 8029
object-group network DM_INLINE_NETWORK_2
network-object host 192.168.20.10
network-object host 192.168.20.30
network-object host 192.168.20.60
object-group service imaps_993 tcp
description Secure IMAP
port-object eq 993
object-group service public_wifi_group
description Service allowed on the Public Wifi Group. Allows Web and Email.
service-object tcp-udp eq domain
service-object tcp-udp eq www
service-object tcp eq https
service-object tcp-udp eq 993
service-object tcp eq imap4
service-object tcp eq 587
service-object tcp eq pop3
service-object tcp eq smtp
access-list outside_access_in remark http traffic from outside
access-list outside_access_in extended permit tcp any object-group DM_INLINE_NETWORK_1 eq www
access-list outside_access_in remark ssh from outside to web1
access-list outside_access_in extended permit tcp any host 58.13.254.11 object-group ssh_2251
access-list outside_access_in remark ssh from outside to penguin
access-list outside_access_in extended permit tcp any host 58.13.254.10 object-group ssh_2229
access-list outside_access_in remark http from outside to penguin
access-list outside_access_in extended permit tcp any host 58.13.254.10 object-group http_8029
access-list outside_access_in remark ssh from outside to hub & studio
access-list outside_access_in extended permit tcp any host 58.13.254.13 object-group DM_INLINE_TCP_1
access-list outside_access_in remark dns service to hub
access-list outside_access_in extended permit object-group TCPUDP any host 58.13.254.13 eq domain
access-list dmz_access_in extended permit ip 192.168.10.0 255.255.255.0 any
access-list dmz_access_in extended permit tcp any host 192.168.10.251 object-group DM_INLINE_TCP_2
access-list public_access_in remark Web access to DMZ websites (mediastudio/civicrm)
access-list public_access_in extended permit object-group TCPUDP any object-group DM_INLINE_NETWORK_2 eq www
access-list public_access_in remark General web access. (HTTP, DNS & ICMP and Email)
access-list public_access_in extended permit object-group public_wifi_group any any
access-list inside_nat0_outbound extended permit ip 192.168.0.0 255.255.255.0 192.168.10.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 192.168.0.0 255.255.255.0 192.168.20.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip any 192.168.0.80 255.255.255.240
access-list inside_nat0_outbound extended permit ip any 192.168.0.64 255.255.255.192
pager lines 24
logging enable
logging timestamp
logging buffered notifications
logging trap notifications
logging asdm debugging
logging from-address [email protected]
logging recipient-address [email protected] level warnings
logging host dmz 192.168.10.90 format emblem
logging permit-hostdown
mtu outside 1500
mtu public 1500
mtu dmz 1500
mtu inside 1500
ip local pool OfficePool 192.168.0.80-192.168.0.90 mask 255.255.255.0
ip local pool VPN_Pool 192.168.0.91-192.168.0.99 mask 255.255.255.0
no failover
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 60
global (outside) 1 interface
global (dmz) 2 interface
nat (public) 1 0.0.0.0 0.0.0.0
nat (dmz) 1 0.0.0.0 0.0.0.0
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
static (inside,outside) tcp interface 2229 192.168.0.29 2229 netmask 255.255.255.255
static (inside,outside) tcp interface 8029 192.168.0.29 www netmask 255.255.255.255
static (dmz,outside) 58.13.254.13 192.168.10.10 netmask 255.255.255.255 dns
static (dmz,outside) 58.13.254.11 192.168.10.30 netmask 255.255.255.255 dns
static (inside,dmz) 192.168.10.0 192.168.0.0 netmask 255.255.255.0 dns
static (dmz,inside) 192.168.0.251 192.168.10.251 netmask 255.255.255.255
static (dmz,public) 192.168.20.30 192.168.10.30 netmask 255.255.255.255 dns
static (dmz,public) 192.168.20.10 192.168.10.10 netmask 255.255.255.255 dns
access-group outside_access_in in interface outside
access-group public_access_in in interface public
access-group dmz_access_in in interface dmz
route outside 0.0.0.0 0.0.0.0 58.13.254.9 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 192.168.0.0 255.255.255.0 inside
http 59.159.40.188 255.255.255.255 outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
sysopt noproxyarp dmz
sysopt noproxyarp inside
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec transform-set TRANS_ESP_3DES_SHA esp-3des esp-sha-hmac
crypto ipsec transform-set TRANS_ESP_3DES_SHA mode transport
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs group1
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map inside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map inside_map interface inside
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto map public_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map public_map interface public
crypto isakmp enable outside
crypto isakmp enable public
crypto isakmp enable inside
crypto isakmp policy 5
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto isakmp policy 10
authentication pre-share
encryption des
hash sha
group 2
lifetime 86400
telnet timeout 5
ssh 59.159.40.188 255.255.255.255 outside
ssh 192.168.0.0 255.255.255.0 inside
ssh timeout 20
console timeout 0
dhcpd dns 61.122.112.97 61.122.112.1
dhcpd auto_config outside
dhcpd address 192.168.20.200-192.168.20.254 public
dhcpd enable public
dhcpd address 192.168.10.190-192.168.10.195 dmz
dhcpd enable dmz
dhcpd address 192.168.0.200-192.168.0.254 inside
dhcpd enable inside
threat-detection basic-threat
threat-detection statistics access-list
threat-detection statistics host number-of-rate 2
no threat-detection statistics tcp-intercept
ntp server 130.54.208.201 source public
webvpn
group-policy DefaultRAGroup internal
group-policy DefaultRAGroup attributes
dns-server value 61.122.112.97 61.122.112.1
vpn-tunnel-protocol l2tp-ipsec
group-policy CiscoASA internal
group-policy CiscoASA attributes
dns-server value 61.122.112.97 61.122.112.1
vpn-tunnel-protocol IPSec
username mcit password 4alT9CZ8ayD8O8Xg encrypted privilege 15
tunnel-group DefaultRAGroup general-attributes
address-pool VPN_Pool
default-group-policy DefaultRAGroup
tunnel-group DefaultRAGroup ipsec-attributes
pre-shared-key *****
tunnel-group ocmc type remote-access
tunnel-group ocmc general-attributes
address-pool OfficePool
tunnel-group ocmc ipsec-attributes
pre-shared-key *****
tunnel-group CiscoASA type remote-access
tunnel-group CiscoASA general-attributes
address-pool VPN_Pool
default-group-policy CiscoASA
tunnel-group CiscoASA ipsec-attributes
pre-shared-key *****
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect ip-options
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
service-policy global_policy global
smtp-server 192.168.10.10
prompt hostname context
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:222d6dcb583b5f5abc51a2251026f7f2
: end
asdm location 192.168.10.10 255.255.255.255 inside
asdm location 192.168.0.29 255.255.255.255 inside
asdm location 58.13.254.10 255.255.255.255 inside
no asdm history enableHi Conor,
What is your local net ? I see only one default route for outside network. Dont you need a route inside for your local network.
Regards,
Umair -
Connecting to local network via Airport?
Hi!
How to set up the MacBook to reach computers on a local network, wirelessly?
I have 4 computers on my local network. 3 macs, 1 pc.
Set up is: Zyxel Prestige 2602R and a SonicWall wireless firewall.
2 macs and the pc are connected to the router via cables.
The MacBook is running wireless.
Everything is fine connecting to the internet. But there is no conectivity
to and from the MacBook, unless I connect it via a cable.
What am I overlooking?
JanDCheck that you have sharing on all your computers set up. Also on your macbook you will need to set up sharing also. This is done under your system preferences window.
You can connect to your other network computers in finder. Click network in the left finder pane and if they are set to share correctly you should see them come up. Just connect to them and a connection should show up in the left finder pane.
Mort -
RD Gateway Manager cannot connect to local server
Hi,
I've come across a problem today where I'm unable to connect to our locally hosted RD Gateway server. We have one Server 2012 R2 machine with the Remote Desktop Services installed. The system was setup following the configuration wizard in Remote Desktop
Services section of Server Manager. One of our users has gone to connect to the main remote app hosted by this setup and received an expired certificate error. No problem I thought, checked the certificate on the server and it does indeed expire today. I'll
re-issue a self signed certificate through the RD Gateway Manager and all should be ok. On loading the RD Gateway Manager, clicking Connect to RD Gateway Server and selecting Local Server I get the following error.
"The RD Gateway Manager snap-in console cannot connect to the server "SERVER" because it is not a RD Gateway server."
I've checked that the services for remote desktop are running which they are, and I can connect to the server using standard RDP remote desktop. Any ideas on where to go next to solve this problem?
RobHi Rob,
It seems the issue related to certificate as can’t properly configured. You need to import the certificate and store in local computer/personal store. Please check below article and verify the steps for certificate and other related setting,
RDS: The RD Gateway server must be configured to use a valid SSL certificate
https://technet.microsoft.com/en-us/library/dd320340(v=ws.10).aspx
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Normally I have my IMac, I-Pad and Windows Laptop all working on my home network via wi-fi. This week I find that I cannot access the inetrnet on my IMac or I-pad via wi-fi but I can connect to the internet via wi-fi with my windows based laptop.
The airport diagnostics (reds/yellows) indcate that I am connected
I can access the internet if I plug my IMac into the router via an ethernet cable
I have restarted the IMac and the I-Pad, rebooted the router and created a new network. None of these changes has made a difference. Does anyone have any ideas please?You have not completed your profile so we cannot assist you. In your profile you will indicate critical information such as what version of OS X is installed on your computer and the computer's configuration. If you do not know how to complete your profile please click Profile Update
-
I cannot enable my wifi because it is grayed out. I some of the recommended actions that I could do mannually to turn the wifi on but I'm still having trouble connecting to the internet via Wifi. I am thinking that I have to add a VPN but I don't know exactly what that means. Any suggestions?
Read this. If it doesn't solve your problem, take it to an Apple Store (hardware problem)
-
Cannot connect to iTunes Store via iPad
When I am outside of my home wi-fi I cannot connect to the iTunes store via the App Store on my iPad. iPad software is current (updated this morning at home). Rebooted iPad. I can access the internet via Safari, get current email, run Netflix, etc. but cannot access iTunes store via the App Store. This issue happens whenever I use a public wi-fi (hotels, airports, etc.) rather than my home wi-fi. Any suggestions? Thanks!
Ok, I found a solution that worked for me when trying to connect to the iTunes store by tapping the "update" button in the "App Store" app on my iPad 2. Before the solution was implemented I'd always get the error message "cannot connect to iTunes store". Once the solution was implemented I now can connect to iTunes using the "update" button in the "App Store" app and I get the normal message "All apps are up to date". The solution is this: go into Settings, then General, then scroll to the bottom where it says Date and Time. Tap Date and Time and then turn OFF Set Automatically. When you do that a new option will be added that says Set Date and Time. Tap it. You'll now get a drop down feature. Set the Date AHEAD 2 YEARS. The Time you can leave alone.
Once you do that you might get a bunch of reminders and messages that your apps and stuff haven't been updated in two years. Click cancel or close on each of those messages or reminders. Now go back into Settings, General, Date and Time, and turn Set Automatically back to ON. Reboot your iPad. Open the App Store app again and go to the Update button. It might ask you to log back in to your iTunes account. It should now work. If not, close the App Store app completely and open again and try the update button. Hope this helps.
Maybe you are looking for
-
Hi Gurus, I m Using SPMON(Period to analyze month and year) as input Field in my BSP Application. If i Click the Input Help i want to call a Function module "popup_to_display_month" .. How to acheive this. I have used onValueHelp attribute in which i
-
How do you know if the battery is dead? Detailed history. Help needed!!
So here's the story. Bought the PowerBook G4 1.67GHz used off a trusted friend. Worked fine for 3 months or whatever up till yesterday basically. The charger was in, orange light, but the charger in the corner was going from "Charge" to "15%" and swi
-
Create vendor as returns vendor
Hi All, I have on the system around 1000 vendors. I need to make these returns vendors which means when I tick the 'vendor return' box it creates a customer etc. How can this be done on mass? can a partner function be added to do this??? Thanks Stuar
-
Looking for a NICOLET BE490 Series Driver for WIN- NT
Hi, is there anybody, who has written a driver for the NICOLET BE490 Series Transient Recorder Board. Geetings Ruediger
-
I got one output list . In that If I modify any contents in that output list that will directly affect to the data base contents and replace these contents. Please provide some solution how we can update.